Lahm
RF Exposure Info
L&S; Italia S.p.A. SMARTUP4 Remote Control 2ARW2-SMARTUP4 2ARW2SMARTUP4 smartup4
Not Your Device? Search For Manuals or Datasheets below:
File Info : application/pdf, 3 Pages, 192.04KB
Document DEVICE REPORTGetApplicationAttachment.html?id=73892591. RF Exposure Requirements 1.1 General Information Client Information Applicant: Address of applicant: L&S ltalia SpA Viale Lino Zanussi, 8-33070 Maron di Brugnera (PN)-ITALY Manufacturer: Address of manufacturer: Nexta Tech - Brand of TEAM srl Via Gugliermo Oberdan, 90 - 33074 Fontanafredda (PN) - ITALY General Description of EUT: Product Name: Trade Name: Model No.: Adding Model(s): Rated Voltage: Power Adaptor : FCC ID: Equipment Type: Remote Control / SMART UP 4 SMART UP 4 MONO DC3V / 2ARW2-SMARTUP4 Portable device Technical Characteristics of EUT: Frequency Range: 433.92MHz Max. Field Strength: 433.92MHz: 78.35dBuV/m(3m) Data Rate: / Modulation: OOK Antenna Type: PCB Antenna Antenna Gain: -18.45dBi 1.2 RF Exposure Exemption According to §1.1307(b)(3) and KDB 447498 D04 Interim General RF Exposure Guidance v01, system operating under the provisions of this section shall be operating in a manner that the public is not exposed to radio frequency energy level in excess limit for maximum permissible exposure. Option A: FCC Rule Part 1.1307 (b)(3)(i)(A):The available maximum time-averaged power is no more than 1mW, regardless of separation distance. Option B: FCC Rule Part 1.1307 (b)(3)(i)(B): The available maximum time-averaged power or effective radiated power (ERP), whichever is greater, is less than or equal to the threshold Pth (mW) described in the following formula. Pth is given by: Option C: FCC Rule Part 1.1307 (b)(3)(i)(C): The minimum separation distance (R in meters) from the body of a nearby person for the frequency (f in MHz) at which the source operates, the ERP (watts) is no more than the calculated value prescribed for that frequency. R must be at least /2, where is the free-space operating wavelength in meters. Single RF Sources Subject to Routine Environmental Evaluation RF Source frequency (MHz) Threshold ERP (watts) 0.3-1.34 1,920 R2 1.34-30 3,450 R2/f2 30-300 3.83 R2 300-1,500 0.0128 R2f 1,500-100,000 19.2R2 For Multiple RF sources: FCC Rule Part 1.1307(b)(3)(ii): (A) The available maximum time-averaged power of each source is no more than 1 mW and there is a separation distance of two centimeters between any portion of a radiating structure operating and the nearest portion of any other radiating structure in the same device, except if the sum of multiple sources is less than 1 mW during the time-averaging period, in which case they may be treated as a single source (separation is not required). (B) In the case of fixed RF sources operating in the same time-averaging period, or of multiple mobile or portable RF sources within a device operating in the same time averaging period, if the sum of the fractional contributions to the applicable thresholds is less than or equal to 1 as indicated in the following equation. 1.3 Calculated Result Radio Access Technology SRD Prediction Frequency (MHz) 433.92 Max. Field Strength (dBuV/m) 78.35 Antenna Gain (dBi) -18.45 Output Power (dBm) 1.54 Tune-Up Power (dBm) 2.00 ERP (dBm) -18.60 Frequency Min. Distance Max. Power Option (MHz) (cm) (dBm) (mW) Exposure Limit (mW) Ratio Result Pass/Fail 433.92 B 0.5 2.00 1.58 23.17 0.07 Pass Note: 1. EIRP= E-104.8+20logD; Output Power=EIRP- Antenna Gain; ERP=EIRP-2.15dB 2. Option A, B and C refers as clause 1.2. 3. For option B, Max (time-averaged power, effective radiated power (ERP)) converts to Max. Power. For option C, ERP converts to Max. Power; 4. For option B, Pth (mW) converts to Exposure Limit (mW); For option C, ERP (W) converts to Exposure Limit (mW). 5. Ratio= Tune-Up ERP (mW)/ Exposure Limit (mW) Mode for Simultaneous Multi-band Transmission: Radio Access Technology Ratio 1 Ratio 2 / / / Ratio 3 / Simultaneous Ratio / Limit / Result Pass/Fail / Result: Pass
Related FCC IDs:
- 2ARW2-SMARTUP4 - L&S; Italia S.p.A. Remote Control [-SMARTUP4] WPS 文字