TX 93483 WINDMILL(2015)NEW

2. Recessed holes to face outward. CHAR-LOG WINDMILL SERIES

Seperate assembly instructions included in box with windmill head. Assemble the Windmill Head (8), make sure the Stop Nut is screwed on well. Start with the Legs by connecting the Upper parts (1X) to the Lower parts (2X) , and (1Y) to (2Y) by using the Bolts (A) . Connect the Upper Support (3) and the Lower Support (4) between the Legs (1)

Limited Warranty and Care Instructions LIMITED ONE YEAR WARRANTY (NON-TRANSFERABLE) PROPER CARE INSTRUCTIONS Customer Service may be reached Monday through Friday from 9:00a.m. to 5:00p.m. CST.

PDF Viewing Options

Not Your Device? Search For Manuals or Datasheets below:


File Info : application/pdf, 2 Pages, 5.33MB

Document DEVICE REPORT410762
Recessed Hole Pre-Checked

IMPORTANT: READ CAREFULLY BEFORE BEGINNING
1. Do not tighten bolts until fully assembled. 2. Recessed holes to face outward. 3. Insert bolts with washer and secure with washer and nut. 4. Pre-checked side must always face downward or inward.

CHAR-LOG WINDMILL SERIES

ITEM # TX 26501 , TX 93485

PARTS AND HARDWARE LIST

1

2

LEG-UPPER

LEG-LOWER

3
UPPER SUPPORT

4
LOWER SUPPORT

1X x 2PCS 1Y x 2PCS
5
SHAFT

6
CROSS BRACE

2X x 2PCS 2Y x 2PCS

PLATFORM

X 4PCS
7

X 4PCS
8
WINDMILL HEAD

A N08-8
NUT & BOLT

X 8PCS
B N08-12
NUT & BOLT

Tools required for assembly

Socket & Wrench

13mm
Mallet

Phillips Screwdriver

X 1PC X 1PC
Tools included C S04-7
SCREW

D S04-3
SCREW

X 8PCS
E
CLAMP

X 16PCS
F
STAKE

X 16PCS

X 32PCS

X 4PCS

X 4PCS

STEP 1:
Start with the Legs by connecting the Upper parts (1X) to the Lower parts (2X) , and (1Y) to (2Y) by using the Bolts (A) .
Connect the Upper Support (3) and the Lower Support (4) between the Legs (1) and (2) by using the Bolts (B) .

1X 3
A B 2X

STEP 2:

5

1X

Fit the Shaft (5) between the angles at the

C

top of the legs: Secure with the screws (C)

using a standard or electric drill.

1Y

B

2Y 2X

Do not fully tighten the bolts.
STEP 3:
7
Slide the Platform (7) through the Shaft (5), and secure with the Screws (C). Fix the Cross Braces (6) on to the legs with the screws (D).
6

4

STEP 4:

STEP 5:

8

Seperate assembly instructions included Place the Windmill Head (8) on the Shaft (5). in box with windmill head.

C
Assembling
D

Optional:
To avoid the wooden legs cracked, tighten the Clamps (E) on each end of the legs. Insert the Stakes (F) into ground to stabilize the Windmill.

Tighten all Bolts and Screws.

E

Congratulations

Assemble the Windmill Head (8), make

on your assembly!

F

sure the Stop Nut is screwed on well.

Limited Warranty and Care Instructions
LIMITED ONE YEAR WARRANTY (NON-TRANSFERABLE)
This product is covered under United General Supply's (UGS) one (1) year limited warranty. To the original purchaser of this piece of furniture, cooler or accessory; UGS warrants that it will be free from defects in material and workmanship for up to one year from the date of purchase under normal use and proper care.
Replacement of defective or missing parts will be sent at no charge to the customer for a period of 30 days from the date of purchase. UGS will no longer be responsible for missing parts or hardware 30 days after date of purchase. Freight, packaging, labor or material charges to and from our customer service center is not covered under the warranty and is therefore the customer's responsibility.
The limited warranty does not cover this piece of furniture, cooler or accessory for commercial purposes, abusive use, damage by modification, freeze damage, rust, fading and issues caused by improper care.
For minor defects or missing parts/hardware, please contact customer service immediately upon purchase. Please do not return product to the store unless the product is irreparable. A customer service agent may help determine whether the damage is repairable and will provide further instructions.
For returns and refunds, please refer to your local store return policy with proof of purchase. Proof of purchase (dated register receipt) will be required for warranty claims.
PROPER CARE INSTRUCTIONS
If left untreated, wood will naturally weather. During long periods of non-use, store furniture or cooler in covered and dry place. For the least maintenance, place your furniture, cooler, or accessory under a covered area.
To preserve and maintain the original finish of Char-log/ Aspen log furniture, we recommend that a light lacquer coating be applied every 4 to 6 months depending on the seasons.
We recommended an exterior poly-urethane product that features a clear satin or semi-gloss finish and a fast drying process.
Customer Service may be reached Monday through Friday from 9:00a.m. to 5:00p.m. CST.

www.LeighCountry.com
© 2014 UGS Co., Inc. All Rights Reserved

DISTRIBUTED BY UNITED GENERAL SUPPLY CO., INC
HOUSTON, TX 77036


Adobe Illustrator CS5 Adobe PDF library 10.01

Search Any Device: