TempStar HH-E VER Tem pStar HH-E V ER

PDF Viewing Options

Not Your Device? Search For Manuals or Datasheets below:


File Info : application/pdf, 4 Pages, 1.28MB

Document DEVICE REPORTTempStar-HH-E-VER-Spec-Sheet
TempStar® HH-E VER

Project Item Quantity

CSI Section 11400

TempStar® HH-E VER
Tall Chamber High Temperature Sanitizing Ventless Door-type with Energy Recovery

Standard Features
î Ventless: does not require a hood î Unique, two-pass Energy Recovery System î Cold water connection only î Door interlock keeps door locked during cycle î Built-in 70 °F (38.9 °C) rise booster heater with
Sani-SureTM final rinse system ensures proper rinse
water temperature
î Automatic tank fill î Door-actuated start î Four (4) selectable timed cycles î Delime/manual wash mode î 27" (686 mm) vertical chamber clearance
accommodates sheet pans and 60-quart
mixing bowls
î Specially designed stainless steel nozzles provide
superior cleaning action
î Interchangeable upper and lower wash/rinse arms î Door switch î 1 HP self-draining stainless steel wash pump motor î Large scrap basket î Pressure regulator is provided for installation
by others
î Single point connections for all utilities î Field convertible from straight through to corner and
vice versa (kit required)
î Field convertible from 3-phase to single phase and
vice versa (kit required)
î Low watt density electric wash tank heater î Hi-limit thermostat and low water protection î Detergent/rinse additive signal connection fuse box î Front stainless steel dress panels î Uses standard 20" X 20" (508 mm X 508 mm) racks î Adjustable bullet feet î Durable stainless steel construction î Requires some assembly

Specification Statement
Specified unit will be a Jackson TempStar HH-E VER tall chamber ventless high temperature sanitizing door-type dishwasher with two-pass energy recovery system, rated by ETL Sanitation to NSF/ANSI Standard 3. Unit will be ENERGY STAR® certified. Unit to be rated for 41 racks per hour, 0.89 gallons per rack, and will include a builtin 70 °F rise booster heater with Sani-SureTM final rinse system, four (4) selectable timed cycles, 27" chamber clearance, and solid-state controls. Other features include automatic tank fill, door-actuated start, interchangeable upper and lower wash/rinse arms, manual/delime wash mode, vent fan control, and 2 HP stainless steel wash pump motor. Constructed of durable stainless steel with adjustable bullet feet.
1-year parts and labor warranty.

Options & Accessories

î 460V Electrical î Single Phase î Drain Water Tempering Kit î Water Hammer Arrestor î False Panel (for corner
installations)
î Flanged Feet î Security Package î Scaltrol î Replacement Cartridge
for Scaltrol

î 36-Compartment Rack
4-1/8" tall (105 mm)
5-5/8" tall (143 mm)
7" tall (178 mm)
î Combination Rack î Peg Rack î Sheet Pan Rack - for
18" X 26" (457 mm X
660 mm) baking pans

1

TempStar® HH-E VER

JACKSON VENTLESS TECHNOLOGY SAVINGS
Purchase and Installation of Vent Hood HVAC Used to Evacuate Steam Energy Recovery

$3,500 $900 $255

TOTAL SAVINGS

$4,655 the first year $1,155 every year after

$7,000 $6,000

$900

Annual Ventilation Costs Annual Operating Costs Initial Costs

$5,000 $4,000 $3,000 $2,000

$1,848 $3,500

$900

$900 $255
$3,500

$1,000 $0

$1,593

$1,593

$1,848

First Year $1,593

Ongoing $1,593

TempStar with Ventless and Energy Recovery

First Year $6,248

Ongoing $2,748

TempStar

First Year $4,655

$900
$255 Ongoing $1,155

Savings

*Based on standard height TempStar Ventless with Energy Recovery model. The following standards were used to calculate the above:

Days per week 7 Cycles per day

200

Ground water temp 65

Gas cost per therm $0.8600

Hours per day 12 Water cost per gallon $0.00698 Electric cost per kW $0.0962 Hood

450 CFM

2

TempStar® HH-E VER

B
514 (134 mm)

4 (102 m MINIMUM

LEGEND A - Drain (1 1/2" NPT) B - Water Inlet (3/4" NPT) C - Electrical Connection
All dimensions from floor can be increased 1 1/8" using the machine's adjustable feet.

25

1 4

(641

mm)

2 8

5 8

(727

mm)

17 (432 mm)
B C

35

5 8

(905

mm)

234 (79 mm)

93 (2362 88 (2235 mm) 73 (1856 mm)

2 7 (686 mm) CLEARANCE

34 (861 mm) 1134 (298 mm)

A

1514 (387 mm)
3

TempStar® HH-E VER

TempStar® HH-E VER
Tall Chamber High Temperature Sanitizing Ventless Door-type with Energy Recovery

Operating Capacity (Normal Cycle)
Racks per Hour Dishes per Hour Glasses per Hour

40 (37)* 1,000 1,440

Operating Temperature
Wash Temperature (minimum) Rinse Temperature (minimum)

150 °F/66 °C 180 °F/82 °C

Operating Cycle (seconds)

Wash Rinse Dwell

Normal

45

10

10

Medium

103

10

10

Heavy

163

10

10

Extra Heavy 283

10

10

Vent Total Cycle

30

95

30

153

30

213

30

333

Water Consumption
Gallons per Rack Gallons per Hour Gallons per Hour** Wash Tank Capacity (gallons) Booster Tank Capacity (gallons)

0.78 (3.4 L) 31.20 (118.1 L) 28.86 (109.2 L) 8.00 (30.3 L)
3.00 (11.0 L)

Water Requirements
Incoming Water Temperature Flow Pressure (PSI) Incoming Water Connection (NPT) Drain Connection (NPT)

40-90 °F/5-33 °C 10
3/4" 1 1/2"

Electrical Specifications

Wash Pump Motor (HP)

208V

2

230V

2

460V

2

Wash Tank Heater (kW)

208V

4.1

230V

5.0

460V

5.0

Rinse Tank Heater (kW)

208V

10.5

230V

12.9

460V

12.9

Power Supply
208/60/3 230/60/3 460/60/3 208/60/1 230/60/1

Total Load
51.8 A 56.0 A 25.7 A 81.4 A 88.9 A

Minimum Circuit
Ampacity
54.6 A 58.8 A 26.5 A 84.2 A 91.7 A

Maximum Overcurrent Protection
70.0 A 70.0 A 30.0 A 100.0 A 100.0 A

Heat Output (BTU/HR)
Latent Heat Sensible Heat

2683 5988

Dimensions
Width Depth Height Clearance Above
Heat Exchanger (minimum) Inside Clearance Height Wall Clearance (minimum)
Rear Side (corner installation) Drain Height Weight

28 5/8" (727 mm) 35 5/8" (905 mm)
93" (2362)
6" (152 mm) 27" (686 mm)
0" (0 mm) 4" (102 mm) 11 3/4" (298 mm) 396 lbs (180 kg)

Shipping Details
Shipping Weight Shipping Width Shipping Depth Shipping Height Shipping Cube Shipping Class

436 lbs (198 kg) 42" (1067 mm) 42" (1067 mm) 77" (1956 mm)
88.60 cu ft 200

Advisory: Jackson WWS, Inc. DOES NOT endorse "Tankless OnDemand" water heaters for use with our dishmachines. Jackson WWS, Inc. DOES endorse, and highly recommends, standard "tank" style water heaters, sized to properly handle the water heating requirements of the facility.
*Racks per hour calculated with NSF suggested load time of :05 for door-type (straight thru) dishmachines.
**Gallons per hour calculated with NSF suggested load time of :05 for door-type (straight thru) dishmachines.

Contact Jackson
Address 6209 N U.S. Highway 25E Gray, Kentucky 40734

Telephone & Fax T 888.800.5672 F 606.523.1799

07610-004-96-22 [04/14/23]
Email [email protected]

www JACKSONWWS.COM

JACKSON WAREWASHING SYSTEMS

JACKSON WWS

We reserve the right to change specifications in this document without incurring any obligation for equipment previously or subsequently sold.

4

©2023 Jackson WWS, Inc. except where explicitly stated otherwise. All rights reserved.


Adobe InDesign 18.2 (Windows) Adobe PDF Library 17.0

Search Any Device: