电磁兼容部
Test Report JBP
HMD global Oy TA-1429 Smart Phone 2AJOTTA-1429 2AJOTTA1429 ta 1429
Test Report CXX
Not Your Device? Search For Manuals or Datasheets below:
File Info : application/pdf, 19 Pages, 746.46KB
Document DEVICE REPORTGetApplicationAttachment.html?id=5881098TEST REPORT No.I22N00718-EMC for HMD Global Oy Smart Phone Model NameTA-1429 With Hardware Version: V01 Software Version: 00WW_0_017 FCC ID:2AJOTTA-1429 Issued Date: 2022-03-28 Designation Number: CN1210 Note: The test results in this test report relate only to the devices specified in this report. This report shall not be reproduced except in full without the written approval of SAICT. Test Laboratory: SAICT, Shenzhen Academy of Information and Communications Technology Building G, Shenzhen International Innovation Center, No.1006 Shennan Road, Futian District, Shenzhen, Guangdong, P. R. China. 518000. Tel:+86(0)755-33322000, Fax:+86(0)755-33322001 Email: [email protected]. www.saict.ac.cn No.I22N00718-EMC REPORT HISTORY Report Number Revision Description Issue Date I22N00718-EMC Rev.0 1st edition 2022-03-28 Note: the latest revision of the test report supersedes all previous version. ©Copyright. All rights reserved by SAICT. Page 2 of 19 No.I22N00718-EMC CONTENTS 1. SUMMARY OF TEST REPORT......................................................................................................... 4 1.1. TEST ITEMS .................................................................................................................................... 4 1.2. TEST STANDARDS ......................................................................................................................... 4 1.3. TEST RESULT.................................................................................................................................. 4 1.4. TESTING LOCATION .................................................................................................................... 4 1.5. PROJECT DATA .............................................................................................................................. 4 1.6. SIGNATURE ..................................................................................................................................... 4 2. CLIENT INFORMATION ................................................................................................................... 5 2.1. APPLICANT INFORMATION ....................................................................................................... 5 2.2. MANUFACTURER INFORMATION ............................................................................................ 5 3. EQUIPMENT UNDER TEST (EUT) AND ANCILLARY EQUIPMENT (AE) ............................. 6 3.1. ABOUT EUT ..................................................................................................................................... 6 3.2. INTERNAL IDENTIFICATION OF EUT ..................................................................................... 6 3.3. INTERNAL IDENTIFICATION OF AE ........................................................................................ 6 3.4. EUT SET-UPS ................................................................................................................................... 7 3.5. GENERAL DESCRIPTION ............................................................................................................ 8 4. REFERENCE DOCUMENTS ............................................................................................................. 9 4.1. REFERENCE DOCUMENTS FOR TESTING ............................................................................. 9 5. LABORATORY ENVIRONMENT................................................................................................... 10 6. SUMMARY OF TEST RESULTS ......................................................................................................11 6.1. TESTING ENVIRONMENT ..........................................................................................................11 6.2. SUMMARY OF MEASUREMENT RESULTS.............................................................................11 6.3. STATEMENT ...................................................................................................................................11 7. MEASUREMENT UNCERTAINTY ................................................................................................ 12 9. TEST ACCESSORY UTILIZED....................................................................................................... 13 ANNEX A: MEASUREMENT RESULTS................................................................................................ 14 A.1 RADIATED EMISSION (§15.109(A))................................................................................................ 14 ©Copyright. All rights reserved by SAICT. Page 3 of 19 No.I22N00718-EMC 1. SUMMARY OF TEST REPORT 1.1. Test Items Description Model Name Applicant's name Manufacturer's Name Smart Phone 2AJOTTA-1429 HMD Global Oy HMD Global Oy 1.2. Test Standards FCC Part 15, Subpart B (10-1-2020 Edition); ANSI C63.4-2014. 1.3. Test Result Total test 2 items, pass 2 items. Please refer to "6.2 Test Results". 1.4. Testing Location Address: Building G, Shenzhen International Innovation Center, No.1006 Shennan Road, Futian District, Shenzhen, Guangdong, China 1.5. Project data Testing Start Date: 2022-03-28 Testing End Date: 2022-04-13 1.6. Signature Liang Yong (Prepared this test report) Zhang Yunzhuan (Reviewed this test report) Cao Junfei (Approved this test report) ©Copyright. All rights reserved by SAICT. Page 4 of 19 No.I22N00718-EMC 2. CLIENT INFORMATION 2.1. Applicant Information Company Name: HMD Global Oy Address: Bertel Jungin aukio 9, 02600 Espoo, Finland Contact Reza Serafat Email [email protected] Tel. +393 31 6272922 2.2. Manufacturer Information Company Name: HMD Global Oy Address: Bertel Jungin aukio 9, 02600 Espoo, Finland Contact Reza Serafat Email [email protected] Tel. +393 31 6272922 ©Copyright. All rights reserved by SAICT. Page 5 of 19 No.I22N00718-EMC 3. EQUIPMENT UNDER TEST (EUT) AND ANCILLARY EQUIPMENT (AE) 3.1. About EUT Description Model Name FCC ID Condition of EUT as received Smart Phone TA-1429 2AJOTTA-1429 No obvious damage in appearance Note: Components list, please refer to documents of the manufacturer; it is also included in the original test record of Shenzhen Academy of Information and Communications Technology. 3.2. Internal Identification of EUT EUT ID* SN or IMEI HW Version SW Version UT01aa 356254720004012 V01 00WW_0_017 *EUT ID: is used to identify the test sample in the lab internally. Receive Date 2022-03-28 3.3. Internal Identification of AE AE ID* Description AE1 Battery AE2 Charger AE3 USB Cable AE4 Headset AE1-1 Model GH6581 Manufacturer Shenzhen Aerospace Electronic CO.,Ltd. Capacity 4850mAh Nominal Voltage 3.85v AE2-1 Model AD-010E Manufacturer Shenzhen Baijunda Electronics Co. LTD AE2-2 Model AD-010U Manufacturer Shenzhen Baijunda Electronics Co. LTD AE2-3 Model AD-010A Manufacturer Shenzhen Baijunda Electronics Co. LTD AE2-4 Model AD-010X Manufacturer Shenzhen Baijunda Electronics Co. LTD AE3-1 Model MO56B2000100 ©Copyright. All rights reserved by SAICT. Page 6 of 19 No.I22N00718-EMC Manufacturer Qianyang FKY Electronic Technology Co., Ltd. AE4 Model JWEP1199-M01H / Manufacturer JUWEI ELECTRONICS CO.,LTD / * AE ID: is used to identify the test sample in the lab internally. AE: ancillary equipment AE2The circuit boards of model AD-010E (AE2-1), AD-010U (AE2-2), AD-010A (AE2-3), and AD-010X (AE2-4),are the same. 3.4. EUT Set-ups EUT set-up No. Set.1 Combination of EUT and AE EUT+AE1-1+AE2-1+AE3-1+AE4 Remarks ©Copyright. All rights reserved by SAICT. Page 7 of 19 No.I22N00718-EMC 3.5. General Description The Equipment Under Test (EUT) is a model of Smart Phone. It supports GSM 850/900/1800/1900MHz,WCDMA Bands 1/2/4/5/8 and LTE Bands 1/2/3/4/5/7/8/12/13/17/28/66. It has Video Player, Camera, FM Receiver, USB memory, Bluetooth, Wi-Fi and GNSS functions. It consists of normal options: Battery, Charger USB Cable and headset. Manual and specifications of the EUT were provided to fulfill the test. Samples (EUT+AE) undergoing test were selected by the Client. Relevant information is provided by the client. The model TA-1429 is a variant model based on model TA-1413 manufactured by HMD Global Oy for conformance test. According to client's description, the table below shows the differences: Model TA-1413 TA-1429 USIM Supports 2 SIM slot Supports 1 SIM slot Software Version 00WW_0_070 00WW_0_070 According to the declaration of differences by manufacturer, the following tests of Smart Phone TA-1429 need to be performed. NO. Test item EUT set-up Operating mode Radiated 1 Emission Set.1 Video Player Other results of are cited from the initial model TA-1413. The report number for initial model is I21N04074-EMC. ©Copyright. All rights reserved by SAICT. Page 8 of 19 No.I22N00718-EMC 4. REFERENCE DOCUMENTS 4.1. Reference Documents for Testing The following documents listed in this section are referred for testing. Reference Title FCC Part 15, Subpart B Radio frequency devices Methods of Measurement of Radio-Noise Emissions from ANSI C63.4 Low-Voltage Electrical and Electronic Equipment in the Range of 9 kHz to 40 GHz Version (10-1-2020 Edition) 2014 ©Copyright. All rights reserved by SAICT. Page 9 of 19 No.I22N00718-EMC 5. LABORATORY ENVIRONMENT Semi-anechoic chamber did not exceed following limits along the EMC testing: 9.10m×6.10m×5.60m (L×W×H) Temperature Min. = 15 , Max. = 35 Relative humidity Min. = 20 %, Max. = 75 % Shielding effectiveness 0.014MHz-1MHz,>60dB; 1MHz-18000MHz,>90dB Electrical insulation >2M Ground system resistance <4 Normalised site attenuation (NSA) <±4 dB, 3 m distance, from 30 to 1000 MHz Shield room did not exceed following limits along the EMC testing: Temperature Min. = 15 , Max. = 35 Relative humidity Min. =20 %, Max. = 75 % Shielding effectiveness 0.014MHz-1MHz,>60dB; 1MHz-10000MHz,>90dB Electrical insulation >2M Ground system resistance <4 Fully-anechoic chamber did not exceed following limits along the EMC testing: 9.10m×6.10m×5.60m (L×W×H) Temperature Min. = 15 , Max. = 35 Relative humidity Min. = 20 %, Max. = 75 % Shielding effectiveness 0.014MHz-1MHz,>60dB; 1MHz-18000MHz,>90dB Electrical insulation >2M Ground system resistance <4 Voltage Standing Wave RatioVSWR 6 dB, from 1 to 18GHz3 m distance Uniformity of field strength Between 0 and 6 dB, from 80 to 6000 MHz ©Copyright. All rights reserved by SAICT. Page 10 of 19 No.I22N00718-EMC 6. SUMMARY OF TEST RESULTS 6.1. Testing Environment Normal Temperature: 15~35 Relative Humidity: 20~75% Atmospheric pressure 86~106kPa 6.2. Summary of Measurement Results Abbreviations used in this clause: P NA F Pass Not applicable Fail Items 1 2 Test Name Radiated Emission Conducted Emission Clause in FCC 15.109(a) 15.107(a) Section in this report A.1 A.2 Verdict P P 6.3. Statement 6.3.1 Statements of conformity This report takes measured values as criterion of test conclusion. The test conclusion meets the limit requirements. ©Copyright. All rights reserved by SAICT. Page 11 of 19 No.I22N00718-EMC 7. MEASUREMENT UNCERTAINTY Test item Radiated Emission Conducted Emission Frequency ranges 30MHz-1GHz 1GHz-18GHz 18GHz-40GHz 150kHz-30MHz Measurement uncertainty 4.86dB(k=2) 4.82dB(k=2) 2.90dB(k=2) 2.62dB(k=2) 8. MEASURING APPARATUS UTILIZED No. Name Model 1. Test Receiver ESR7 2. Test Receiver ESCI 3. Spectrum Analyzer FSV40 4. BiLog Antenna 3142E 5. Horn Antenna 3117 6. LISN ENV216 7. Chamber FACT3-2.0 8. Software EMC32 9. Universal Radio Communication Tester CMU200 10. QSH-SL-18-2 Horn Antenna 6-S-20 11. QSH-SL-8-26- Horn Antenna 40-K-20 Serial Number 101676 100702 101192 0224831 00066577 102067 1285 V10.50.40 114545 17013 17014 Manufacturer R&S R&S R&S ETS-Lindgren ETS-Lindgren R&S ETS-Lindgren R&S Calibration Due date 2022.11.24 2023.01.12 2023.01.12 2024.05.27 2025.03.15 2022.07.15 2023.05.29 / Calibration Period 1 year 1 year 1 year 3 years 3 years 1 year 2 years / R&S 2023.01.12 1 year Q-par 2023.01.06 3 years Q-par 2023.01.06 3 years ©Copyright. All rights reserved by SAICT. Page 12 of 19 No.I22N00718-EMC 9. TEST ACCESSORY UTILIZED No. Name 1. PC 2. Printer 3. Mouse Model ThinkPad T480 P1008 MOEUUOA Serial Number PF-13LW0C VNF6C12491 44NY517 Manufacturer Lenovo HP Lenovo Calibration Due date / / / Calibration Period / / / ©Copyright. All rights reserved by SAICT. Page 13 of 19 No.I22N00718-EMC ANNEX A: MEASUREMENT RESULTS A.1 Radiated Emission (§15.109(a)) Reference FCC: Part 15.109(a) A.1.1 Method of measurement The field strength of radiated emissions from the unintentional radiator at a distance of 3 meters or 1 meter is tested. Tested in accordance with the procedures of ANSI C63.4 -2014, section 8.3. The EUT was placed on a non-conductive table. Below 18GHz the measurement antenna was placed at a distance of 3 meters from the EUT. Above 18GHz the measurement antenna was placed at a distance of 1 meters from the EUT. (According to Part 15.31(f)(1), 1m limit is calculated by extrapolation factor of 20 dB/decade) During the tests, the antenna height and the EUT azimuth were varied in order to identify the maximum level of emissions from the EUT. This maximization process was repeated with the EUT positioned in each of its three orthogonal orientations. A.1.2 EUT Operating Mode: Video Player: The EUT is connected to a charger for charging and keeping on playing mp3. This device contains the receivers which tune and operate between 30MHz-960MHz in the following bands: All equipment is placed on the test table top and arranged in a typical configuration in accordance with ANSI C63.4-2014 and manipulated to obtain worst case emissions. ©Copyright. All rights reserved by SAICT. Page 14 of 19 No.I22N00718-EMC A.1.3 Measurement Limit Limit from Part 15.109(a) Frequency range Field strength limit (µV/m) (MHz) Quasi-peak Average Peak 30-88 100 88-216 150 216-960 200 960-1000 500 >1000 500 5000 *Note: The original limit is defined at 10m test distance. This limit is calculated according to CISPR requirements. A.1.4 Test Condition Frequency of emission (MHz) 30-1000 Above 1000 RBW/VBW 120kHz (IF bandwidth) 1MHz/3MHz Sweep Time(s) 5 15 A.1.5 Test set-up: 30MHz-1GHz ©Copyright. All rights reserved by SAICT. Page 15 of 19 1GHz-40GHz 3 m Fully-Anechoic Chamber 1m to 4m EUT No.I22N00718-EMC A.1.6 Measurement Results A "reference path loss" is established and the ARpl is the attenuation of "reference path loss". It includes the antenna factor of receive antenna and the path loss. The measurement results are obtained as described below: Result=PMea+ARpl = PMea +GA+GPL Where GA: Antenna factor of receive antenna GPL:PathLoss PMea: Measurement result on receiver. Result:Quasi-Peak(dBµV/m) /Average(dBµV/m)/Peak(dBµV/m) Note: the result contains vertical part and Horizontal part Video Player Frequency range (MHz) 30-88 88-216 216-960 960-1000 Quasi-Peak Limit (dBV/m) 40.00 43.52 46.02 54.00 Result (dBV/m) UT09aa/Set.1 See Figure A.1.1. Conclusion P Frequency range (MHz) 1000 to 18000 18000 to 26500 26500 to 40000 Average Limit (dBV/m) 54.00 54.00 54.00 Peak Limit (dBV/m) 74.00 74.00 74.00 Result (dBV/m) UT09aa/Set.1 See Figure A.1.2. See Figure A.1.3. See Figure A.1.4. Conclusion P ©Copyright. All rights reserved by SAICT. Page 16 of 19 No.I22N00718-EMC Figure A.1.1. Radiated Emission (Video Player , 30MHz to 1GHz) Final_Results Frequency QuasiPeak Limit Margin Pol ARpl (MHz) (dBµV/m) (dBµV/m) (dB) (dB/m) 35.927778 22.20 40.00 17.80 V -16 41.693889 21.41 40.00 18.59 V -19 51.232222 22.97 40.00 17.03 V -22 95.259444 20.11 43.52 23.41 V -21 795.599444 953.386111 25.06 27.24 46.02 46.02 20.96 H -1 18.78 H 1 PMea (dBµV) 38.20 40.41 44.97 41.11 26.06 26.24 ©Copyright. All rights reserved by SAICT. Page 17 of 19 No.I22N00718-EMC Figure A.1.2. Radiated Emission (Video Player , 1GHz to 18GHz) Final_Results_PK Frequency(MHz) Peak (dBµV/m) Limit ARpl Margin(dB) Polarity (dBµV/m) (dB/m) 13946.000000 57.21 74.00 16.79 V 18 14573.750000 56.49 74.00 17.51 V 19 15541.250000 56.43 74.00 17.57 V 20 16261.750000 59.35 74.00 14.65 V 22 16969.750000 59.60 74.00 14.40 V 23 17701.000000 61.30 74.00 12.70 H 24 Final_Results_AVG Frequency(MHz) Average (dBµV/m) Limit ARpl Margin(dB) Polarity (dBµV/m) (dB/m) 13946.000000 43.50 54.00 10.50 V 18 14573.750000 43.71 54.00 10.29 V 19 15541.250000 44.40 54.00 9.60 V 20 16261.750000 46.39 54.00 7.61 V 22 16969.750000 46.45 54.00 7.55 V 23 17701.000000 48.10 54.00 5.90 H 24 PMea (dBµV) 39.21 37.49 36.43 37.35 36.6 37.30 PMea (dBµV) 25.50 24.71 24.40 24.39 23.45 24.10 ©Copyright. All rights reserved by SAICT. Page 18 of 19 No.I22N00718-EMC Figure A.1.3. Radiated Emission (Video Player , 18GHz to 26.5GHz) Figure A.1.4. Radiated Emission (Video Player , 26.5GHz to 40GHz) ***END OF REPORT*** ©Copyright. All rights reserved by SAICT. Page 19 of 19
Related FCC IDs:
- 2AJOTTA-1429 - HMD global Oy Smart Phone [TA-1429] Microsoft Word 2016 Microsoft Word 2016