1043BT 说明书 转曲

15 PSUFM1043BT UserMan-US

GUANGDONG GOLOD TECHNOLOGY CO.,LTD PSUFM1043BT Active speaker 2BA8E-PSUFM1043BT 2BA8EPSUFM1043BT psufm1043bt

User Manual for PYLE models including: PSUFM1043BT Active Speaker, PSUFM1043BT, Active Speaker, Speaker

PDF Viewing Options

Not Your Device? Search For Manuals or Datasheets below:


File Info : application/pdf, 3 Pages, 2.19MB

Document DEVICE REPORTGetApplicationAttachment.html?id=6551588 
Symptom Possible problem

Solution

No function light & No sound

1.Plug is not well connected Insert the plug into electrical outlet

2.Speaker power button is not turned on

Turn on the button

Function light on but no sound

1.Cable misconnected
2.Speaker are not connected or misconnected

Turn off the power,check the input jack to ensure proper audio signal is connected to relevant input jack
Power off ,then check and confim the cable connection again

3.Audio signal is not transmitted to speaker

Check all the speaker if there is audio signal output

Remote control does not work

1.Before you press any function button,first select the correct source with the remote control instead of the main unit
2.Reduce the distance between the remote control and the unit
3.Insert the battery with its polarities(+/-signs) aligned as indicated
4.Replace the battery

5.Aim the remote control directly at the sensor on the front of the unit

If the problem exists after checking related procedures above , please refer to the appointed service agent or professional technician to fix it.Do not attempt to open the cover, otherwise we assumes no responsibility.

FCC Warning
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
-Reorient or relocate the receiving antenna. -Increase the separation between the equipment and receiver. -Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -Consult the dealer or an experienced radio/TV technician for help.
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.

References

Related FCC IDs:

Search Any Device: