Test Report BLE
ALE USA Inc. OAW-AP152X OmniAccess Stellar 2AI9TOAW-AP152X 2AI9TOAWAP152X oaw ap152x
Not Your Device? Search For Manuals or Datasheets below:
File Info : application/pdf, 61 Pages, 4.98MB
Document DEVICE REPORTGetApplicationAttachment.html?id=8009195MRT Technology (Suzhou) Co., Ltd Phone: +86-512-66308358 Web: www.mrt-cert.com Report No.: 2408RSU020-U1 Report Version: V01 Issue Date: 2024-12-24 RF MEASUREMENT REPORT FCC ID: 2AI9TOAW-AP152X Applicant: ALE USA Inc. Product: OmniAccess Stellar Model No.: OAW-AP1521 Brand Name: Alcatel-Lucent Enterprise FCC Classification: Digital Transmission System (DTS) FCC Rule Part(s): Part 15 Subpart C (Section 15.247) Result: Complies Received Date: 2024-08-12 Test Date: 2024-10-09 ~ 2024-10-17 Reviewed By: Approved By: Vincent Yu Robin Wu The test results relate only to the samples tested. This equipment has been shown to be capable of compliance with the applicable technical standards as indicated in the measurement report and was tested in accordance with the measurement procedures specified in ANSI C63.10-2013. Test results reported herein relate only to the item(s) tested. The test report shall not be reproduced except in full without the written approval of MRT Technology (Suzhou) Co., Ltd. Template Version:1.5 1 of 61 Report No. 2408RSU020-U1 Version V01 Revision History Description Initial Report Report No.: 2408RSU020-U1 Issue Date 2024-12-24 Note Valid 2 of 61 Report No.: 2408RSU020-U1 CONTENTS Description Page 1. General Information ................................................................................................................................5 1.1. Applicant ...................................................................................................................................... 5 1.2. Manufacturer ................................................................................................................................ 5 1.3. Testing Facility ............................................................................................................................. 5 1.4. Product Information...................................................................................................................... 6 1.5. Radio Specification under Test .................................................................................................... 6 1.6. Working Frequencies ................................................................................................................... 7 2. Test Configuration ...................................................................................................................................8 2.1. Test Mode..................................................................................................................................... 8 2.2. Test System Connection Diagram................................................................................................ 8 2.3. Test Software ............................................................................................................................... 8 2.4. Applied Standards........................................................................................................................ 9 2.5. Test Environment Condition ......................................................................................................... 9 3. Antenna Requirements .........................................................................................................................10 4. Measuring Instrument ...........................................................................................................................11 5. Decision Rules and Measurement Uncertainty ..................................................................................12 5.1. Decision Rules ........................................................................................................................... 12 5.2. Measurement Uncertainty .......................................................................................................... 12 6. Test Result..............................................................................................................................................13 6.1. 6.2. 6.2.1. 6.2.2. 6.2.3. 6.2.4. 6.2.5. 6.3. 6.3.1. 6.3.2. 6.3.3. 6.3.4. 6.3.5. 6.4. 6.4.1. 6.4.2. Summary .................................................................................................................................... 13 6dB Bandwidth Measurement.................................................................................................... 14 Test Limit .................................................................................................................................... 14 Test Procedure ........................................................................................................................... 14 Test Setting ................................................................................................................................ 14 Test Setup .................................................................................................................................. 14 Test Result ................................................................................................................................. 14 Output Power Measurement ...................................................................................................... 15 Test Limit .................................................................................................................................... 15 Test Procedure ........................................................................................................................... 15 Test Setting ................................................................................................................................ 15 Test Setup .................................................................................................................................. 15 Test Result ................................................................................................................................. 15 Power Spectral Density Measurement ...................................................................................... 16 Test Limit .................................................................................................................................... 16 Test Procedure ........................................................................................................................... 16 3 of 61 Report No.: 2408RSU020-U1 6.4.3. 6.4.4. 6.4.5. 6.5. 6.5.1. 6.5.2. 6.5.3. 6.5.4. 6.5.5. 6.6. 6.6.1. 6.6.2. 6.6.3. 6.6.4. 6.6.5. 6.7. 6.7.1. 6.7.2. 6.7.3. 6.7.4. 6.7.5. 6.8. 6.8.1. 6.8.2. 6.8.3. Test Setting ................................................................................................................................ 16 Test Setup .................................................................................................................................. 16 Test Result ................................................................................................................................. 16 Conducted Band Edge and Out-of-Band Emissions Measurement .......................................... 17 Test Limit .................................................................................................................................... 17 Test Procedure ........................................................................................................................... 17 Test Setting ................................................................................................................................ 17 Test Setup .................................................................................................................................. 17 Test Result ................................................................................................................................. 18 Radiated Spurious Emission Measurement............................................................................... 19 Test Limit .................................................................................................................................... 19 Test Procedure ........................................................................................................................... 19 Test Setting ................................................................................................................................ 19 Test Setup .................................................................................................................................. 21 Test Result ................................................................................................................................. 22 Radiated Restricted Band Edge Measurement ......................................................................... 23 Test Limit .................................................................................................................................... 23 Test Procedure ........................................................................................................................... 24 Test Setting ................................................................................................................................ 24 Test Setup .................................................................................................................................. 25 Test Result ................................................................................................................................. 26 AC Conducted Emissions Measurement ................................................................................... 27 Test Limit .................................................................................................................................... 27 Test Setup .................................................................................................................................. 27 Test Result ................................................................................................................................. 27 Appendix A - Test Result................................................................................................................................28 A.1 Duty Cycle Test Result ............................................................................................................... 28 A.2 6dB Bandwidth Test Result ........................................................................................................ 29 A.3 Output Power Test Result .......................................................................................................... 31 A.4 Power Spectral Density Test Result ........................................................................................... 32 A.5 Conducted Band Edge and Out-of-Band Emissions Test Result............................................... 34 A.6 Radiated Spurious Emission Test Result ................................................................................... 38 A.7 Radiated Restricted Band Edge Test Result.............................................................................. 42 A.8 AC Conducted Emissions Test Result ....................................................................................... 58 Appendix B - Test Setup Photograph ...........................................................................................................60 Appendix C - EUT Photograph ......................................................................................................................61 4 of 61 1. General Information 1.1. Applicant ALE USA Inc. 2000 Corporate Center Drive Thousand Oaks, CA 91320 Report No.: 2408RSU020-U1 1.2. Manufacturer ALE USA Inc. 2000 Corporate Center Drive Thousand Oaks, CA 91320 1.3. Testing Facility Test Site MRT Suzhou Laboratory Laboratory Location (Suzhou - Wuzhong) D8 Building, No.2 Tian'edang Rd., Wuzhong Economic Development Zone, Suzhou, China Laboratory Location (Suzhou - SIP) 4b Building, Liando U Valley, No.200 Xingpu Rd., Shengpu Town, Suzhou Industrial Park, China Laboratory Location (Suzhou - Wujiang) Building 1, No.1 Xingdong Road, Wujiang, Suzhou, Jiangsu, People's Republic of China Laboratory Accreditations A2LA: 3628.01 CNAS: L10551 FCC: CN1166 ISED: CN0001 VCCI: R-20025 R-20141 G-20034 G-20134 C-20020 C-20103 T-20020 T-20104 Test Site MRT Shenzhen Laboratory Laboratory Location (Shenzhen) 1G, Building A, Junxiangda Building, Zhongshanyuan Road West, Nanshan District, Shenzhen, China Laboratory Accreditations A2LA: 3628.02 CNAS: L10551 FCC: CN1284 ISED: CN0105 Test Site MRT Taiwan Laboratory Laboratory Location (Taiwan) No. 38, Fuxing 2nd Rd., Guishan Dist., Taoyuan City 333, Taiwan (R.O.C.) Laboratory Accreditations TAF: 3261 FCC: 291082, TW3261 ISED: TW3261 5 of 61 Report No.: 2408RSU020-U1 1.4. Product Information Product Name OmniAccess Stellar Model No. OAW-AP1521 EUT Identification No. 20240929Sample#05 Wi-Fi Specification 802.11a/b/g/n/ac/ax/be Bluetooth Specification V5.1 single mode, BLE only Zigbee Specification 802.15.4 Antenna Information Refer to section 1.5 Power Type AC/DC Adapter Input or PoE Input Operating Environment Indoor Use Accessories Model: ADP-50GR B Adapter Input: 100-240V ~ 1.3A 50-60Hz Output: 48.0V, 1.042A 50.1W Model: POE60U-1BT-X (ALE P/N: POE60U-1BT-X-R) Input: 100-240V ~ 1.5A, 50/60Hz Output: 56.0V, 0.535A, 30W PoE Injector PIN 3, 6+ PIN 1, 2 Return Output: 56.0V, 0.535A, 30W PIN 4, 5+ PIN 7, 8 Return Remark: 1. The information of EUT was provided by the manufacturer, and the accuracy of the information shall be the responsibility of the manufacturer. 2. AC/DC Power Adapter and PoE Injector are not sold with Product. For this report, we select AC/DC Adapter for testing. 1.5. Radio Specification under Test Bluetooth Frequency Channel Number Type of modulation Data Rate Antenna Type Antenna Gain 2402 ~ 2480MHz 40 GFSK 1Mbps & 2Mbps Dipole Antenna 5.3dBi 6 of 61 1.6. Working Frequencies Channel 00 03 06 09 12 15 18 21 24 27 30 33 36 39 Frequency 2402 MHz 2408 MHz 2414 MHz 2420 MHz 2426 MHz 2432 MHz 2438 MHz 2444 MHz 2450 MHz 2456 MHz 2462 MHz 2468 MHz 2474 MHz 2480 MHz Channel 01 04 07 10 13 16 19 22 25 28 31 34 37 -- Frequency 2404 MHz 2410 MHz 2416 MHz 2422 MHz 2428 MHz 2434 MHz 2440 MHz 2446 MHz 2452 MHz 2458 MHz 2464 MHz 2470 MHz 2476 MHz -- Report No.: 2408RSU020-U1 Channel 02 05 08 11 14 17 20 23 26 29 32 35 38 -- Frequency 2406 MHz 2412 MHz 2418 MHz 2424 MHz 2430 MHz 2436 MHz 2442 MHz 2448 MHz 2454 MHz 2460 MHz 2466 MHz 2472 MHz 2478 MHz -- 7 of 61 2. Test Configuration 2.1. Test Mode Mode 1: Transmit by BLE-1Mbps Mode 2: Transmit by BLE-2Mbps Report No.: 2408RSU020-U1 2.2. Test System Connection Diagram The device was tested per the guidance ANSI C63.10: 2013 was used to reference the appropriate EUT setup for radiated emissions testing and AC line conducted testing. Connection Diagram Cable Type A Power Cable B LAN Cable Product 1 Notebook Cable Description Non-Shielded Non-Shielded Manufacturer ThinkPad Length 1.5m > 10m Model No. E14 Gen 5 2.3. Test Software The test utility software used during testing was "IPOP" and commands were provided by the manufacturer. 8 of 61 Report No.: 2408RSU020-U1 2.4. Applied Standards According to the specifications of the manufacturer, the EUT must comply with the requirements of the following standards: FCC Part 15.247 KDB 558074 D01v05r02 ANSI C63.10-2013 2.5. Test Environment Condition Ambient Temperature Relative Humidity 15 ~ 35°C 20 ~75%RH 9 of 61 Report No.: 2408RSU020-U1 3. Antenna Requirements Excerpt from §15.203 of the FCC Rules/Regulations: "An intentional radiator antenna shall be designed to ensure that no antenna other than that furnished by the responsible party can be used with the device. The use of a permanently attached antenna or of an antenna that uses a unique coupling to the intentional radiator shall be considered sufficient to comply with the provisions of this section." The antenna of the device is permanently attached. There are no provisions for connection to an external antenna. Conclusion: The unit complies with the requirement of §15.203. 10 of 61 Report No.: 2408RSU020-U1 4. Measuring Instrument Instrument Signal Analyzer Thermohygrometer Signal Analyzer USB Power Sensor EMI Test Receiver Two-Line V-Network Four-Line V-Network Thermohygrometer Shielding Room Anechoic Chamber Thermohygrometer TRILOG Antenna EMI Test Receiver Active Loop Antenna Signal Analyzer Horn Antenna Preamplifier Thermohygrometer Anechoic Chamber Horn Antenna Thermohygrometer Preamplifier Signal Analyzer Anechoic Chamber Manufacturer Model No. Asset No. Keysight N9010B MRTSUE07028 testo 608-H1 MRTSUE11022 Keysight N9030B MRTSUE06395 Keysight U2021XA MRTSUE06596 R&S ESR3 MRTSUE06612 R&S ENV216 MRTSUE06003 R&S ENV432 MRTSUE06614 testo 608-H1 MRTSUE06621 MIX-BEP SIP-SR2 MRTSUE06949 RIKEN SIP-AC1 MRTSUE06554 testo 608-H1 MRTSUE06616 Schwarzbeck VULB 9168 MRTSUE06645 R&S ESR3 MRTSUE06185 Schwarzbeck FMZB 1519-60 D MRTSUE07075 Keysight N9010B MRTSUE06559 Schwarzbeck BBHA 9170 MRTSUE06598 EMCI EMC184045SE MRTSUE06602 testo 608-H1 MRTSUE06622 RIKEN SIP-AC2 MRTSUE06781 R&S HF907 MRTSUE06611 testo 608-H1 MRTSUE06619 EMCI EMC012645SE MRTSUE06642 Keysight N9010B MRTSUE07028 RIKEN SIP-AC3 MRTSUE06782 Cali. Interval Cali. Due Date Test Site 1 year 2025-10-13 SIP-TR1 1 year 2024-10-28 SIP-TR1 1 year 2025-06-21 SIP-TR1 1 year 2025-07-23 SIP-TR1 1 year 2025-05-08 SIP-SR2 1 year 2025-05-08 SIP-SR2 1 year 2025-10-13 SIP-SR2 1 year 2024-11-03 SIP-SR2 5 years 2029-10-13 SIP-SR2 1 year 2024-12-21 SIP-AC1 1 year 2024-10-28 SIP-AC1 1 year 2025-07-05 SIP-AC1 1 year 2024-12-17 SIP-AC1 1 year 2024-12-04 SIP-AC1 1 year 2025-05-08 SIP-AC2 1 year 2024-11-04 SIP-AC2 1 year 2025-10-08 SIP-AC2 1 year 2024-11-03 SIP-AC2 1 year 2024-12-21 SIP-AC2 1 year 2025-07-07 SIP-AC3 1 year 2024-10-28 SIP-AC3 1 year 2025-01-11 SIP-AC3 1 year 2025-10-13 SIP-AC3 1 year 2024-12-21 SIP-AC3 Software Version e3 230711 Agilent Power Analyzer/Agilent Power Panel V R03.09.00 Controller_MF 7802BS 1.02 Function EMI Test Software Power RE Antenna & Turntable 11 of 61 Report No.: 2408RSU020-U1 5. Decision Rules and Measurement Uncertainty 5.1. Decision Rules The Decision Rule is based on Simple Acceptance in accordance with ISO Guide 98-4: 2012 Clause 8.2. (Measurement uncertainty is not taken into account when stating conformity with a specified requirement.) 5.2. Measurement Uncertainty Where relevant, the following test uncertainty levels have been estimated for tests performed on the EUT as specified in CISPR 16-4-2. This uncertainty represents an expanded uncertainty expressed at approximately the 95% confidence level using a coverage factor of k = 2. AC Conducted Emission Measurement The maximum measurement uncertainty is evaluated as: 9kHz~150kHz: 3.58dB 150kHz~30MHz: 3.20dB Radiated Emission Measurement The maximum measurement uncertainty is evaluated as: Coaxial: 9kHz~30MHz: 2.61dB Coplanar: 9kHz~30MHz: 2.62dB Horizontal: 30MHz~200MHz: 3.79dB 200MHz~1GHz: 3.91dB 1GHz~40GHz: 4.99dB Vertical: 30MHz~200MHz: 4.06dB 200MHz~1GHz: 5.21dB 1GHz~40GHz: 4.90dB Spurious Emissions, Conducted Measuring Uncertainty for a Level of Confidence of 95% (U=2Uc(y)): 2.2dB Output Power Measuring Uncertainty for a Level of Confidence of 95% (U=2Uc(y)): 1.4dB Power Spectrum Density Measuring Uncertainty for a Level of Confidence of 95% (U=2Uc(y)): 2.2dB Occupied Bandwidth Measuring Uncertainty for a Level of Confidence of 95% (U=2Uc(y)): 2.7% 12 of 61 Report No.: 2408RSU020-U1 6. Test Result 6.1. Summary FCC Section(s) 15.247(a)(2) Test Description 6dB Bandwidth Test Condition Verdict Pass 15.247(b)(3) 15.247(e) Output Power Power Spectral Density Conducted Pass Pass 15.247(d) Band Edge / Out-of-Band Emissions Pass 15.205 15.209 General Field Strength (Restricted Bands and Radiated Emission) Radiated Pass 15.207 AC Conducted Emissions 150kHz - 30MHz Line Conducted Pass Notes: 1. The analyzer plots shown in this section were all taken with a correction table loaded into the analyzer. The correction table was used to account for the losses of the cables and attenuators used as part of the system to connect the EUT to the analyzer at all frequencies of interest. 2. For radiated emission test, every axis (X, Y, Z) was also verified. The test results shown in the following sections represent the worst-case emissions. 13 of 61 Report No.: 2408RSU020-U1 6.2. 6dB Bandwidth Measurement 6.2.1. Test Limit The minimum 6dB bandwidth shall be at least 500 kHz. 6.2.2. Test Procedure ANSI C63.10 - 2013 - Section 11.8 6.2.3. Test Setting 1. The Spectrum's automatic bandwidth measurement capability was used to perform the 6dB bandwidth measurement. The "X" dB bandwidth parameter was set to X = 6. The bandwidth measurement was not influenced by any intermediate power nulls in the fundamental emission. 2. Set RBW = 100 kHz 3. VBW 3 × RBW 4. Detector = Peak 5. Trace mode = Max hold 6. Sweep = Auto couple 7. Allow the trace to stabilize 6.2.4. Test Setup 6.2.5. Test Result Refer to Appendix A.2. 14 of 61 Report No.: 2408RSU020-U1 6.3. Output Power Measurement 6.3.1. Test Limit The maximum output power shall be less 1 Watt (30dBm). The conducted output power limit specified in paragraph FCC Part 15.247(b) of this section is based on the use of antennas with directional gains that do not exceed 6 dBi. If transmitting antennas of directional gain greater than 6 dBi are used, the conducted output power from the intentional radiator shall be reduced below the stated values in paragraphs FCC Part 15.247(b)(3) of this section, as appropriate, by the amount in dB that the directional gain of the antenna exceeds 6 dBi. 6.3.2. Test Procedure ANSI C63.10 - 2013 - Section 11.9.1.3 ANSI C63.10 - 2013 - Section 11.9.2.3.2 6.3.3. Test Setting Method PKPM1 (Peak Power Measurement of Signals with DTS BW 50MHz) Peak power measurements were performed only when the EUT was transmitting at its maximum power control level using a broadband power meter with a pulse sensor. The pulse sensor employs a VBW = 50MHz so this method was only used for signals whose DTS bandwidth was less than or equal to 50MHz. Average Power Measurement Average power measurements were performed only when the EUT was transmitting at its maximum power control level using a broadband power meter with a pulse sensor. The power meter implemented triggering and gating capabilities which were set up such that power measurements were recorded only during the ON time of the transmitter. 6.3.4. Test Setup 6.3.5. Test Result Refer to Appendix A.3. 15 of 61 Report No.: 2408RSU020-U1 6.4. Power Spectral Density Measurement 6.4.1. Test Limit The maximum permissible power spectral density is 8dBm in any 3 kHz band. The same method of determining the conducted output power shall be used to determine the power spectral density. 6.4.2. Test Procedure ANSI C63.10-2013 Section 11.10.2 6.4.3. Test Setting 1. Analyzer was set to the center frequency of the DTS channel under investigation 2. Span = 1.5 times the DTS channel bandwidth 3. RBW = 3kHz 4. VBW = 10kHz 5. Detector = peak 6. Sweep time = auto couple 7. Trace mode = max hold 8. Trace was allowed to stabilize 6.4.4. Test Setup 6.4.5. Test Result Refer to Appendix A.4. 16 of 61 Report No.: 2408RSU020-U1 6.5. Conducted Band Edge and Out-of-Band Emissions Measurement 6.5.1. Test Limit The limit for out-of-band spurious emissions at the band edge is 20dB below the fundamental emission level, as determined from the in-band power measurement of the DTS channel performed in a 100 kHz bandwidth per the PSD procedure. 6.5.2. Test Procedure ANSI C63.10-2013 - Section 11.11 6.5.3. Test Setting Reference level measurement 1. Set instrument center frequency to DTS channel center frequency 2. Set the span to 1.5 times the DTS bandwidth 3. Set the RBW = 100 kHz 4. Set the VBW 3 x RBW 5. Detector = peak 6. Sweep time = auto couple 7. Trace mode = max hold 8. Allow trace to fully stabilize Emission level measurement 1. Set the center frequency and span to encompass frequency range to be measured 2. RBW = 100kHz 3. VBW = 300kHz 4. Detector = Peak 5. Trace mode = max hold 6. Sweep time = auto couple 7. The trace was allowed to stabilize 6.5.4. Test Setup 17 of 61 6.5.5. Test Result Refer to Appendix A.5. Report No.: 2408RSU020-U1 18 of 61 Report No.: 2408RSU020-U1 6.6. Radiated Spurious Emission Measurement 6.6.1. Test Limit All out of band emissions appearing in a restricted band as specified in Section 15.205 of the Title 47 CFR must not exceed the limits shown in Table per Section 15.209. Frequency [MHz] 0.009 - 0.490 0.490 - 1.705 1.705 - 30 30 - 88 88 - 216 216 - 960 Above 960 FCC Part 15 Subpart C Paragraph 15.209 Field Strength [uV/m] 2400/F (kHz) 24000/F (kHz) 30 100 150 200 500 Measured Distance [Meters] 300 30 30 3 3 3 3 6.6.2. Test Procedure ANSI C63.10 - 2013 - Section 11.11 & 11.12 ANSI C63.10 - 2013 - Section 6.3 (General Requirements) ANSI C63.10 - 2013 - Section 6.4 (Standard test method below 30MHz) ANSI C63.10 - 2013 - Section 6.5 (Standard test method above 30MHz to 1GHz) ANSI C63.10 - 2013 - Section 6.6 (Standard test method above 1GHz) 6.6.3. Test Setting Table 1 - RBW as a function of frequency Frequency RBW 9 ~ 150 kHz 200 ~ 300 Hz 0.15 ~ 30 MHz 9 ~ 10 kHz 30 ~ 1000 MHz 100 ~ 120 kHz > 1000MHz 1MHz 19 of 61 Report No.: 2408RSU020-U1 Quasi-Peak Measurements below 1GHz 1. Analyzer center frequency was set to the frequency of the radiated spurious emission of interest 2. Span was set greater than 1MHz 3. RBW = as specified in Table 1 4. Detector = CISPR quasi-peak 5. Sweep time = auto couple 6. Trace was allowed to stabilize Peak Measurements above 1GHz 1. Analyzer center frequency was set to the frequency of the radiated spurious emission of interest 2. RBW = 1MHz 3. VBW = 3MHz 4. Detector = Peak 5. Sweep time = Auto couple 6. Trace mode = Max hold 7. Trace was allowed to stabilize Average Measurements above 1GHz (Method VB) 1. Analyzer center frequency was set to the frequency of the radiated spurious emission of interest 2. RBW = 1MHz 3. VBW; if the EUT is configured to transmit with duty cycle 98%, set VBW = 10Hz If the EUT duty cycle is < 98%, set VBW 1/T. T is the minimum transmission duration. 4. As an alternative, the instrument may be set to linear detector mode. Ensure that video filtering is applied in linear voltage domain (rather than in a log or dB domain). Some instruments require linear display mode in order to accomplish this. Others have a setting for Average-VBW Type, which can be set to "Voltage" regardless of the display mode 5. Detector = Peak 6. Sweep time = Auto 7. Trace mode = Max hold 8. Trace was allowed to stabilize 20 of 61 6.6.4. Test Setup Below 30MHz Test Setup: Report No.: 2408RSU020-U1 Below 1GHz Test Setup: 21 of 61 Above 1GHz Test Setup: Report No.: 2408RSU020-U1 6.6.5. Test Result Refer to Appendix A.6. 22 of 61 Report No.: 2408RSU020-U1 6.7. Radiated Restricted Band Edge Measurement 6.7.1. Test Limit For 15.205 requirement: Radiated emissions which fall in the restricted bands, as defined in Section 15.205(a) of FCC part 15, must also comply with the radiated emission limits specified in Section 15.209(a). Frequency (MHz) 0.090 - 0.110 1 0.495 - 0.505 2.1735 - 2.1905 4.125 - 4.128 4.17725 - 4.17775 4.20725 - 4.20775 6.215 - 6.218 6.26775 - 6.26825 6.31175 - 6.31225 8.291 - 8.294 8.362 - 8.366 8.37625 - 8.38675 8.41425 - 8.41475 12.29 - 12.293 12.51975 - 12.52025 12.57675 - 12.57725 13.36 - 13.41 Frequency (MHz) 16.42 - 16.423 16.69475 - 16.69525 16.80425 - 16.80475 25.5 - 25.67 37.5 - 38.25 73 - 74.6 74.8 - 75.2 108 - 121.94 123 - 138 149.9 - 150.05 156.52475 - 156.52525 156.7 - 156.9 162.0125 - 167.17 167.72 - 173.2 240 - 285 322 - 335.4 -- Frequency (MHz) 399.9 - 410 608 - 614 960 - 1240 1300 - 1427 1435 - 1626.5 1645.5 - 1646.5 1660 - 1710 1718.8 - 1722.2 2200 - 2300 2310 - 2390 2483.5 - 2500 2690 - 2900 3260 - 3267 3332 - 3339 3345.8 - 3358 3600 - 4400 -- Frequency (GHz) 4.5 - 5.15 5.35 - 5.46 7.25 - 7.75 8.025 - 8.5 9.0 - 9.2 9.3 - 9.5 10.6 - 12.7 13.25 - 13.4 14.47 - 14.5 15.35 - 16.2 17.7 - 21.4 22.01 - 23.12 23.6 - 24.0 31.2 - 31.8 36.43 - 36.5 (2) -- 23 of 61 Report No.: 2408RSU020-U1 All out of band emissions appearing in a restricted band as specified in Section 15.205 of the Title 47CFR must not exceed the limits shown in Table per Section 15.209. FCC Part 15 Subpart C Paragraph 15.209 Frequency [MHz] 0.009 - 0.490 0.490 - 1.705 1.705 - 30 30 - 88 88 - 216 216 - 960 Above 960 Field Strength [uV/m] 2400/F (kHz) 24000/F (kHz) 30 100 150 200 500 Measured Distance [Meters] 300 30 30 3 3 3 3 6.7.2. Test Procedure ANSI C63.10-2013 Section 6.3 & 6.6 & 11.13 6.7.3. Test Setting Peak Field Strength Measurements 1. Analyzer center frequency was set to the frequency of the radiated spurious emission of interest 2. RBW = 1MHz 3. VBW = 3MHz 4. Detector = peak 5. Sweep time = auto couple 6. Trace mode = max hold 7. Trace was allowed to stabilize 24 of 61 Report No.: 2408RSU020-U1 Average Field Strength Measurements 1. Analyzer center frequency was set to the frequency of the radiated spurious emission of interest 2. RBW = 1MHz 3. VBW; If the EUT is configured to transmit with duty cycle 98%, set VBW = 10 Hz. If the EUT duty cycle is < 98%, set VBW 1/T. T is the minimum transmission duration. 4. As an alternative, the instrument may be set to linear detector mode. Ensure that video filtering is applied in linear voltage domain (rather than in a log or dB domain). Some instruments require linear display mode in order to accomplish this. Others have a setting for Average-VBW Type, which can be set to "Voltage" regardless of the display mode 5. Detector = Peak 6. Sweep time = auto 7. Trace mode = max hold 8. Allow max hold to run for at least 50 times (1/duty cycle) traces 6.7.4. Test Setup 25 of 61 6.7.5. Test Result Refer to Appendix A.7. Report No.: 2408RSU020-U1 26 of 61 Report No.: 2408RSU020-U1 6.8. AC Conducted Emissions Measurement 6.8.1. Test Limit Frequency (MHz) FCC Part 15 Subpart C Paragraph 15.207 Limits QP (dBuV) AV (dBuV) 0.15 - 0.50 66 - 56 56 - 46 0.50 - 5.0 56 46 5.0 - 30 60 50 Note 1: The lower limit shall apply at the transition frequencies. Note 2: The limit decreases linearly with the logarithm of the frequency in the range 0.15MHz to 0.5MHz. 6.8.2. Test Setup 6.8.3. Test Result Refer to Appendix A.8. 27 of 61 Report No.: 2408RSU020-U1 Appendix A - Test Result A.1 Duty Cycle Test Result Test Site Test Date SIP-TR1 2024-10-10 Test Engineer Ryan Wang Test Mode Duty Cycle BLE-1Mbps 85.4% BLE-2Mbps 57.7% Duty Cycle (T = Transmission Duration) BLE-1Mbps (T = 2.135ms) BLE-2Mbps (T = 1.083ms) 28 of 61 A.2 6dB Bandwidth Test Result Test Site Test Date SIP-TR1 2024-10-14 Report No.: 2408RSU020-U1 Test Engineer Ryan Wang Test Mode BLE BLE BLE BLE BLE BLE Data Rate 1Mbps 1Mbps 1Mbps 2Mbps 2Mbps 2Mbps Channel No. 00 19 39 00 19 39 Frequency (MHz) 2402 2440 2480 2402 2440 2480 6dB Bandwidth (MHz) 0.6764 0.6766 0.6793 1.092 1.092 1.100 Limit (MHz) 0.5 0.5 0.5 0.5 0.5 0.5 BLE-1Mbps 6dB Bandwidth Channel 00 (2402MHz) Channel 19 (2440MHz) Channel 39 (2480MHz) 29 of 61 Report No.: 2408RSU020-U1 BLE-2Mbps 6dB Bandwidth Channel 00 (2402MHz) Channel 19 (2440MHz) Channel 39 (2480MHz) 30 of 61 A.3 Output Power Test Result Test Site Test Date SIP-TR1 2024-10-14 Report No.: 2408RSU020-U1 Test Engineer Ryan Wang Test Result of Peak Output Power Test Mode BLE BLE BLE BLE BLE BLE Data Rate 1Mbps 1Mbps 1Mbps 2Mbps 2Mbps 2Mbps Channel No. 00 19 39 00 19 39 Frequency (MHz) 2402 2440 2480 2402 2440 2480 Peak Power (dBm) 9.91 9.86 9.68 9.90 9.87 9.71 Limit (dBm) 30.00 30.00 30.00 30.00 30.00 30.00 Result Pass Pass Pass Pass Pass Pass Test Result of Average Output Power (Reporting Only) Test Mode Data Rate Channel No. Frequency Average Power (MHz) (dBm) BLE 1Mbps 00 2402 9.62 BLE 1Mbps 19 2440 9.67 BLE 1Mbps 39 2480 9.48 BLE 2Mbps 00 2402 9.69 BLE 2Mbps 19 2440 9.66 BLE 2Mbps 39 2480 9.49 Limit (dBm) 30.00 30.00 30.00 30.00 30.00 30.00 Result Pass Pass Pass Pass Pass Pass 31 of 61 A.4 Power Spectral Density Test Result Test Site Test Date SIP-TR1 2024-10-14 Report No.: 2408RSU020-U1 Test Engineer Ryan Wang Test Mode BLE BLE BLE BLE BLE BLE Data Rate 1Mbps 1Mbps 1Mbps 2Mbps 2Mbps 2Mbps Channel No. 00 19 39 00 19 39 Frequency (MHz) 2402 2440 2480 2402 2440 2480 PSD Result Limit (dBm / 3kHz) (dBm / 3kHz) -6.34 8.00 -6.33 8.00 -6.49 8.00 -6.57 8.00 -6.67 8.00 -6.75 8.00 Result Pass Pass Pass Pass Pass Pass Channel 00 (2402MHz) BLE-1Mbps PSD Channel 19 (2440MHz) Channel 39 (2480MHz) 32 of 61 Channel 00 (2402MHz) BLE-2Mbps PSD Report No.: 2408RSU020-U1 Channel 19 (2440MHz) Channel 39 (2480MHz) 33 of 61 Report No.: 2408RSU020-U1 A.5 Conducted Band Edge and Out-of-Band Emissions Test Result Test Site Test Date SIP-TR1 2024-10-14 Test Engineer Ryan Wang Test Mode BLE BLE BLE BLE BLE BLE Data Rate / Mbps 1 1 1 2 2 2 Channel No. 00 19 39 00 19 39 Frequency (MHz) 2402 2440 2480 2402 2440 2480 Limit (dBc) 20 20 20 20 20 20 Result Pass Pass Pass Pass Pass Pass BLE-1Mbps Out-of-Band Emissions Channel 00 (2402MHz) 100kHz PSD Reference Level Low Band Edge Spurious Emission 30MHz ~ 25GHz 34 of 61 Report No.: 2408RSU020-U1 Channel 19 (2440MHz) 100kHz PSD Reference Level Spurious Emission 30MHz ~ 25GHz Channel 39 (2480MHz) 100kHz PSD Reference Level High Band Edge Spurious Emission 30MHz ~ 25GHz 35 of 61 Report No.: 2408RSU020-U1 BLE-2Mbps Out-of-Band Emissions Channel 00 (2402MHz) 100kHz PSD Reference Level Low Band Edge Spurious Emission 30MHz ~ 25GHz Channel 19 (2440MHz) 100kHz PSD Reference Level Spurious Emission 30MHz ~ 25GHz 36 of 61 Channel 39 (2480MHz) 100kHz PSD Reference Level Report No.: 2408RSU020-U1 High Band Edge Spurious Emission 30MHz ~ 25GHz 37 of 61 Report No.: 2408RSU020-U1 A.6 Radiated Spurious Emission Test Result Test Site Test Date Remark SIP-AC3 Test Engineer Mero Zhou 2024-10-17 Test Mode BLE-1Mbps 1. Average measurement was not performed if peak level lower than average limit. 2. Other frequency was 20dB below limit line within 1-18GHz, there is not shown in the report. Test Frequency Channel (MHz) Reading Level (dBV) Factor (dB/m) Measure Level (dBV/m) Limit Margin Detector (dBV/m) (dB) Polarization 4804.6 57.4 -7.0 50.4 74.0 -23.6 Peak 11737.2 47.1 0.0 47.2 74.0 -26.9 Peak 17850.4 43.8 9.5 53.3 74.0 -20.8 Peak 17850.4 32.6 9.5 42.1 00 4804.6 51.6 -7.0 44.6 54.0 -12.0 Average 74.0 -29.4 Peak 10846.4 46.8 0.8 47.6 74.0 -26.4 Peak 17855.5 44.9 9.3 54.2 74.0 -19.8 Peak 17855.5 32.8 9.3 42.1 54.0 -11.9 Average 3776.1 49.5 -7.8 41.6 74.0 -32.4 Peak 4879.4 52.7 -7.0 45.8 74.0 -28.2 Peak 11466.9 47.1 0.4 47.6 19 3760.8 49.4 -8.0 41.5 74.0 -26.5 Peak 74.0 -32.5 Peak 4879.4 50.2 -7.0 43.2 74.0 -30.8 Peak 10730.8 47.2 0.4 47.7 74.0 -26.4 Peak 4270.8 51.1 -7.1 44.0 74.0 -30.0 Peak 4921.9 51.4 -6.4 45.0 74.0 -29.0 Peak 11111.6 39 3850.9 48.1 0.9 49.0 51.3 -7.6 43.7 74.0 -25.0 Peak 74.0 -30.3 Peak 4915.1 51.9 -6.4 45.5 74.0 -28.5 Peak 10839.6 48.4 0.8 49.2 74.0 -24.8 Peak Note: Measure Level (dBV/m) = Reading Level (dBV) + Factor (dB/m) Factor (dB/m) = Cable Loss (dB) + Antenna Factor (dB/m) - Pre_Amplifier Gain (dB) Horizontal Horizontal Horizontal Horizontal Vertical Vertical Vertical Vertical Horizontal Horizontal Horizontal Vertical Vertical Vertical Horizontal Horizontal Horizontal Vertical Vertical Vertical 38 of 61 Report No.: 2408RSU020-U1 Test Site Test Date Remark SIP-AC3 Test Engineer Mero Zhou 2024-10-17 Test Mode BLE-2Mbps 1. Average measurement was not performed if peak level lower than average limit. 2. Other frequency was 20dB below limit line within 1-18GHz, there is not shown in the report. Test Frequency Channel (MHz) Reading Level (dBV) Factor (dB/m) Measure Level (dBV/m) Limit Margin Detector (dBV/m) (dB) Polarization 3704.7 51.4 -8.3 43.1 74.0 -30.9 Peak 4802.9 57.7 -7.0 50.7 74.0 -23.3 Peak 11130.3 49.4 0.2 49.6 00 3850.9 50.6 -7.6 43.0 74.0 -24.4 Peak 74.0 -31.0 Peak 4802.9 53.7 -7.0 46.7 74.0 -27.3 Peak 11514.5 48.8 0.2 49.0 74.0 -25.0 Peak 3703.0 49.6 -8.3 41.3 74.0 -32.7 Peak 4881.1 51.6 -6.9 44.6 74.0 -29.4 Peak 11599.5 47.4 0.2 47.6 19 4216.4 49.7 -7.4 42.3 74.0 -26.4 Peak 74.0 -31.7 Peak 4814.8 49.5 -7.0 42.5 74.0 -31.5 Peak 10871.9 48.0 1.0 49.0 74.0 -25.1 Peak 3839.0 51.2 -7.7 43.4 74.0 -30.6 Peak 4961.0 52.4 -6.7 45.7 74.0 -28.3 Peak 11103.1 49.3 1.0 50.4 39 3791.4 50.5 -7.7 42.8 74.0 -23.6 Peak 74.0 -31.2 Peak 5010.3 50.0 -6.3 43.7 74.0 -30.3 Peak 11109.9 48.7 0.9 49.6 74.0 -24.4 Peak Note: Measure Level (dBV/m) = Reading Level (dBV) + Factor (dB/m) Factor (dB/m) = Cable Loss (dB) + Antenna Factor (dB/m) - Pre_Amplifier Gain (dB) Horizontal Horizontal Horizontal Vertical Vertical Vertical Horizontal Horizontal Horizontal Vertical Vertical Vertical Horizontal Horizontal Horizontal Vertical Vertical Vertical 39 of 61 Report No.: 2408RSU020-U1 The Result of Radiated Emission below 1GHz: Site SIP-AC1 Test Engineer Mero Zhou Factor VULB 9168_00998_25-2000MHz EUT OmniAccess Stellar (OAW-AP1521) Test Mode Transmit by BLE 2M at 2402MHz Test Date Temp./Humidity Polarity Test Voltage 2024-10-17 25.3C /64.9% Horizontal AC 120V/60Hz Frequency No Mark (MHz) Reading (dBV) C.F (dB/m) Measurement (dBV/m) Margin (dB) Limit (dBV/m) Detector 1 34.276 2.20 17.06 19.26 -20.74 40.00 QP 2 66.616 7.50 16.79 24.29 -15.71 40.00 QP 3 148.649 12.20 18.35 30.55 -12.95 43.50 QP 4 * 260.236 23.60 17.02 40.62 -5.38 46.00 QP 5 322.415 17.40 19.13 36.53 -9.47 46.00 QP 6 654.461 4.90 26.00 30.90 -15.10 46.00 QP Notes: 1. " *", means this data is the worst emission level. 2. C.F (dB/m) = Antenna Factor (dB/m)+ Cable Loss (dB). 3. Measurement(dBV/m) = Reading(dBV) + C.F (dB/m). 4. The amplitude of radiated emissions (frequency range from 9kHz to 30MHz and 18GHz to 25GHz) is that proximity to ambient noise, which also are attenuated more than 20 dB below the permissible value. Therefore, the data is not presented in the report. 40 of 61 Report No.: 2408RSU020-U1 Site Test Engineer Factor EUT Test Mode SIP-AC1 Mero Zhou VULB 9168_00998_25-2000MHz OmniAccess Stellar (OAW-AP1521) Transmit by BLE 2M at 2402MHz Test Date Temp./Humidity Polarity Test Voltage 2024-10-17 25.3C /64.9% Vertical AC 120V/60Hz Frequency No Mark (MHz) Reading (dBV) C.F (dB/m) Measurement (dBV/m) Margin (dB) Limit (dBV/m) Detector 1 34.096 21.30 17.04 38.34 -1.66 40.00 QP 2 65.688 20.80 17.00 37.80 -2.20 40.00 QP 3 * 150.327 24.30 18.38 42.68 -0.82 43.50 QP 4 173.692 18.40 17.18 35.58 -7.92 43.50 QP 5 258.780 22.30 17.02 39.32 -6.68 46.00 QP 6 324.229 12.60 19.15 31.75 -14.25 46.00 QP Notes: 1. " *", means this data is the worst emission level. 2. C.F (dB/m) = Antenna Factor (dB/m)+ Cable Loss (dB). 3. Measurement(dBV/m) = Reading(dBV) + C.F (dB/m). 4. The amplitude of radiated emissions (frequency range from 9kHz to 30MHz and 18GHz to 25GHz) is that proximity to ambient noise, which also are attenuated more than 20 dB below the permissible value. Therefore, the data is not presented in the report. 41 of 61 Report No.: 2408RSU020-U1 A.7 Radiated Restricted Band Edge Test Result Site SIP-AC3 Test Engineer Mero Zhou Factor HF907_102861_1-18GHz EUT OmniAccess Stellar (OAW-AP1521) Test Mode Transmit by BLE 1M at 2402MHz Test Date Temp./Humidity Polarity Test Voltage 2024-10-17 24.3C /65.2% Horizontal AC 120V/60Hz Frequency No Mark (MHz) Reading (dBV) C.F (dB/m) Measurement (dBV/m) 1 2334.666 24.14 32.52 56.67 2 2390.000 21.01 32.69 53.70 3 * 2402.261 73.33 32.74 106.07 Notes: 1. " *", means this data is the worst emission level. 2. C.F (dB/m) = Antenna Factor (dB/m) + Cable Loss (dB). 3. Measurement(dBV/m) = Reading(dBV) + C.F (dB/m). Margin (dB) -17.33 -20.30 N/A Limit (dBV/m) 74.00 74.00 N/A Detector Peak Peak Peak 42 of 61 Report No.: 2408RSU020-U1 Site Test Engineer Factor EUT Test Mode SIP-AC3 Mero Zhou HF907_102861_1-18GHz OmniAccess Stellar (OAW-AP1521) Transmit by BLE 1M at 2402MHz Test Date Temp./Humidity Polarity Test Voltage 2024-10-17 24.3C /65.2% Horizontal AC 120V/60Hz Frequency No Mark (MHz) Reading (dBV) C.F (dB/m) Measurement (dBV/m) 1 2379.475 9.65 32.64 42.29 2 2390.000 8.97 32.69 41.66 3 * 2402.045 73.03 32.74 105.77 Notes: 1. " *", means this data is the worst emission level. 2. C.F (dB/m) = Antenna Factor (dB/m) + Cable Loss (dB). 3. Measurement(dBV/m) = Reading(dBV) + C.F (dB/m). Margin (dB) -11.71 -12.34 N/A Limit (dBV/m) 54.00 54.00 N/A Detector Average Average Average 43 of 61 Report No.: 2408RSU020-U1 Site Test Engineer Factor EUT Test Mode SIP-AC3 Mero Zhou HF907_102861_1-18GHz OmniAccess Stellar (OAW-AP1521) Transmit by BLE 1M at 2402MHz Test Date Temp./Humidity Polarity Test Voltage 2024-10-17 24.3C /65.2% Vertical AC 120V/60Hz Frequency No Mark (MHz) Reading (dBV) C.F (dB/m) Measurement (dBV/m) 1 2350.862 23.47 32.58 56.05 2 2390.000 18.63 32.69 51.32 3 * 2401.772 66.72 32.74 99.45 Notes: 1. " *", means this data is the worst emission level. 2. C.F (dB/m) = Antenna Factor (dB/m) + Cable Loss (dB). 3. Measurement(dBV/m) = Reading(dBV) + C.F (dB/m). Margin (dB) -17.95 -22.68 N/A Limit (dBV/m) 74.00 74.00 N/A Detector Peak Peak Peak 44 of 61 Report No.: 2408RSU020-U1 Site Test Engineer Factor EUT Test Mode SIP-AC3 Mero Zhou HF907_102861_1-18GHz OmniAccess Stellar (OAW-AP1521) Transmit by BLE 1M at 2402MHz Test Date Temp./Humidity Polarity Test Voltage 2024-10-17 24.3C /65.2% Vertical AC 120V/60Hz Frequency No Mark (MHz) Reading (dBV) C.F (dB/m) Measurement (dBV/m) 1 2389.430 7.20 32.69 39.88 2 2390.000 5.59 32.69 38.28 3 * 2401.969 65.47 32.74 98.20 Notes: 1. " *", means this data is the worst emission level. 2. C.F (dB/m) = Antenna Factor (dB/m) + Cable Loss (dB). 3. Measurement(dBV/m) = Reading(dBV) + C.F (dB/m). Margin (dB) -14.12 -15.72 N/A Limit (dBV/m) 54.00 54.00 N/A Detector Average Average Average 45 of 61 Report No.: 2408RSU020-U1 Site Test Engineer Factor EUT Test Mode SIP-AC3 Mero Zhou HF907_102861_1-18GHz OmniAccess Stellar (OAW-AP1521) Transmit by BLE 1M at 2480MHz Test Date Temp./Humidity Polarity Test Voltage 2024-10-17 24.3C /65.2% Horizontal AC 120V/60Hz Frequency No Mark (MHz) Reading (dBV) C.F (dB/m) Measurement (dBV/m) 1 * 2479.745 72.65 33.11 105.77 2 2483.500 24.05 33.13 57.18 3 2483.933 26.09 33.13 59.22 Notes: 1. " *", means this data is the worst emission level. 2. C.F (dB/m) = Antenna Factor (dB/m) + Cable Loss (dB). 3. Measurement(dBV/m) = Reading(dBV) + C.F (dB/m). Margin (dB) N/A -16.82 -14.78 Limit (dBV/m) N/A 74.00 74.00 Detector Peak Peak Peak 46 of 61 Report No.: 2408RSU020-U1 Site Test Engineer Factor EUT Test Mode SIP-AC3 Mero Zhou HF907_102861_1-18GHz OmniAccess Stellar (OAW-AP1521) Transmit by BLE 1M at 2480MHz Test Date Temp./Humidity Polarity Test Voltage 2024-10-17 24.3C /65.2% Horizontal AC 120V/60Hz Frequency No Mark (MHz) Reading (dBV) C.F (dB/m) Measurement (dBV/m) 1 * 2480.048 71.79 33.11 104.91 2 2483.500 11.94 33.13 45.07 Notes: 1. " *", means this data is the worst emission level. 2. C.F (dB/m) = Antenna Factor (dB/m) + Cable Loss (dB). 3. Measurement(dBV/m) = Reading(dBV) + C.F (dB/m). Margin (dB) N/A -8.93 Limit (dBV/m) N/A 54.00 Detector Average Average 47 of 61 Report No.: 2408RSU020-U1 Site Test Engineer Factor EUT Test Mode SIP-AC3 Mero Zhou HF907_102861_1-18GHz OmniAccess Stellar (OAW-AP1521) Transmit by BLE 1M at 2480MHz Test Date Temp./Humidity Polarity Test Voltage 2024-10-17 24.3C /65.2% Vertical AC 120V/60Hz Frequency No Mark (MHz) Reading (dBV) C.F (dB/m) Measurement (dBV/m) 1 * 2479.756 65.02 33.11 98.13 2 2483.500 22.28 33.13 55.41 3 2489.917 25.28 33.16 58.44 Notes: 1. " *", means this data is the worst emission level. 2. C.F (dB/m) = Antenna Factor (dB/m) + Cable Loss (dB). 3. Measurement(dBV/m) = Reading(dBV) + C.F (dB/m). Margin (dB) N/A -18.59 -15.56 Limit (dBV/m) N/A 74.00 74.00 Detector Peak Peak Peak 48 of 61 Report No.: 2408RSU020-U1 Site Test Engineer Factor EUT Test Mode SIP-AC3 Mero Zhou HF907_102861_1-18GHz OmniAccess Stellar (OAW-AP1521) Transmit by BLE 1M at 2480MHz Test Date Temp./Humidity Polarity Test Voltage 2024-10-17 24.3C /65.2% Vertical AC 120V/50Hz Frequency No Mark (MHz) Reading (dBV) C.F (dB/m) Measurement (dBV/m) 1 * 2480.046 64.16 33.11 97.27 2 2483.500 7.51 33.13 40.64 3 2483.566 8.42 33.13 41.55 Notes: 1. " *", means this data is the worst emission level. 2. C.F (dB/m) = Antenna Factor (dB/m) + Cable Loss (dB). 3. Measurement(dBV/m) = Reading(dBV) + C.F (dB/m). Margin (dB) 43.27 -13.36 -12.45 Limit (dBV/m) 54.00 54.00 54.00 Detector Average Average Average 49 of 61 Report No.: 2408RSU020-U1 Site Test Engineer Factor EUT Test Mode SIP-AC3 Mero Zhou HF907_102861_1-18GHz OmniAccess Stellar (OAW-AP1521) Transmit by BLE 2M at 2402MHz Test Date Temp./Humidity Polarity Test Voltage 2024-10-17 24.3C /65.2% Horizontal AC 120V/60Hz Frequency No Mark (MHz) Reading (dBV) C.F (dB/m) Measurement (dBV/m) 1 2349.491 24.99 32.57 57.57 2 2390.000 20.99 32.69 53.68 3 * 2402.482 75.61 32.74 108.35 Notes: 1. " *", means this data is the worst emission level. 2. C.F (dB/m) = Antenna Factor (dB/m) + Cable Loss (dB). 3. Measurement(dBV/m) = Reading(dBV) + C.F (dB/m). Margin (dB) -16.43 -20.32 N/A Limit (dBV/m) 74.00 74.00 N/A Detector Peak Peak Peak 50 of 61 Report No.: 2408RSU020-U1 Site Test Engineer Factor EUT Test Mode SIP-AC3 Mero Zhou HF907_102861_1-18GHz OmniAccess Stellar (OAW-AP1521) Transmit by BLE 2M at 2402MHz Test Date Temp./Humidity Polarity Test Voltage 2024-10-17 24.3C /65.2% Horizontal AC 120V/60Hz Frequency No Mark (MHz) Reading (dBV) C.F (dB/m) Measurement (dBV/m) 1 2364.217 11.23 32.62 43.85 2 2390.000 10.61 32.69 43.30 3 * 2402.055 74.03 32.74 106.76 Notes: 1. " *", means this data is the worst emission level. 2. C.F (dB/m) = Antenna Factor (dB/m) + Cable Loss (dB). 3. Measurement(dBV/m) = Reading(dBV) + C.F (dB/m). Margin (dB) -10.15 -10.70 N/A Limit (dBV/m) 54.00 54.00 N/A Detector Average Average Average 51 of 61 Report No.: 2408RSU020-U1 Site Test Engineer Factor EUT Test Mode SIP-AC3 Mero Zhou HF907_102861_1-18GHz OmniAccess Stellar (OAW-AP1521) Transmit by BLE 2M at 2402MHz Test Date Temp./Humidity Polarity Test Voltage 2024-10-17 24.3C /65.2% Vertical AC 120V/60Hz Frequency No Mark (MHz) Reading (dBV) C.F (dB/m) Measurement (dBV/m) 1 2379.645 27.46 32.64 60.10 2 2390.000 25.76 32.69 58.44 3 * 2401.532 66.43 32.73 99.16 Notes: 1. " *", means this data is the worst emission level. 2. C.F (dB/m) = Antenna Factor (dB/m) + Cable Loss (dB). 3. Measurement(dBV/m) = Reading(dBV) + C.F (dB/m). Margin (dB) -13.90 -15.56 N/A Limit (dBV/m) 74.00 74.00 N/A Detector Peak Peak Peak 52 of 61 Report No.: 2408RSU020-U1 Site Test Engineer Factor EUT Test Mode SIP-AC3 Mero Zhou HF907_102861_1-18GHz OmniAccess Stellar (OAW-AP1521) Transmit by BLE 2M at 2402MHz Test Date Temp./Humidity Polarity Test Voltage 2024-10-17 24.3C /65.2% Vertical AC 120V/60Hz Frequency No Mark (MHz) Reading (dBV) C.F (dB/m) Measurement (dBV/m) 1 2389.097 10.89 32.68 43.57 2 2390.000 9.18 32.69 41.87 3 * 2402.045 64.72 32.74 97.46 Notes: 1. " *", means this data is the worst emission level. 2. C.F (dB/m) = Antenna Factor (dB/m) + Cable Loss (dB). 3. Measurement(dBV/m) = Reading(dBV) + C.F (dB/m). Margin (dB) -10.43 -12.13 N/A Limit (dBV/m) 54.00 54.00 N/A Detector Average Average Average 53 of 61 Report No.: 2408RSU020-U1 Site Test Engineer Factor EUT Test Mode SIP-AC3 Mero Zhou HF907_102861_1-18GHz OmniAccess Stellar (OAW-AP1521) Transmit by BLE 2M at 2480MHz Test Date Temp./Humidity Polarity Test Voltage 2024-10-17 24.3C /65.2% Horizontal AC 120V/60Hz Frequency No Mark (MHz) Reading (dBV) C.F (dB/m) Measurement (dBV/m) 1 * 2479.531 71.65 33.11 104.76 2 2483.500 29.36 33.13 62.49 3 2483.546 31.34 33.13 64.47 Notes: 1. " *", means this data is the worst emission level. 2. C.F (dB/m) = Antenna Factor (dB/m) + Cable Loss (dB). 3. Measurement(dBV/m) = Reading(dBV) + C.F (dB/m). Margin (dB) N/A -11.51 -9.53 Limit (dBV/m) N/A 74.00 74.00 Detector Peak Peak Peak 54 of 61 Report No.: 2408RSU020-U1 Site Test Engineer Factor EUT Test Mode SIP-AC3 Mero Zhou HF907_102861_1-18GHz OmniAccess Stellar (OAW-AP1521) Transmit by BLE 2M at 2480MHz Test Date Temp./Humidity Polarity Test Voltage 2024-10-17 24.3C /65.2% Horizontal AC 120V/60Hz Frequency No Mark (MHz) Reading (dBV) C.F (dB/m) Measurement (dBV/m) 1 * 2480.064 69.74 33.11 102.85 2 2483.500 18.17 33.13 51.30 Notes: 1. " *", means this data is the worst emission level. 2. C.F (dB/m) = Antenna Factor (dB/m) + Cable Loss (dB). 3. Measurement(dBV/m) = Reading(dBV) + C.F (dB/m). Margin (dB) N/A -2.70 Limit (dBV/m) N/A 54.00 Detector Average Average 55 of 61 Report No.: 2408RSU020-U1 Site Test Engineer Factor EUT Test Mode SIP-AC3 Mero Zhou HF907_102861_1-18GHz OmniAccess Stellar (OAW-AP1521) Transmit by BLE 2M at 2480MHz Test Date Temp./Humidity Polarity Test Voltage 2024-10-17 24.3C /65.2% Vertical AC 120V/60Hz Frequency No Mark (MHz) Reading (dBV) C.F (dB/m) Measurement (dBV/m) 1 * 2479.527 65.18 33.11 98.29 2 2483.500 26.65 33.13 59.78 3 2488.155 28.16 33.15 61.32 Notes: 1. " *", means this data is the worst emission level. 2. C.F (dB/m) = Antenna Factor (dB/m) + Cable Loss (dB). 3. Measurement(dBV/m) = Reading(dBV) + C.F (dB/m). Margin (dB) N/A -14.22 -12.68 Limit (dBV/m) N/A 74.00 74.00 Detector Peak Peak Peak 56 of 61 Report No.: 2408RSU020-U1 Site Test Engineer Factor EUT Test Mode SIP-AC3 Mero Zhou HF907_102861_1-18GHz OmniAccess Stellar (OAW-AP1521) Transmit by BLE 2M at 2480MHz Test Date Temp./Humidity Polarity Test Voltage 2024-10-17 24.3C /65.2% Vertical AC 120V/60Hz Frequency No Mark (MHz) Reading (dBV) C.F (dB/m) Measurement (dBV/m) 1 * 2480.050 63.14 33.11 96.26 2 2483.500 13.79 33.13 46.92 Notes: 1. " *", means this data is the worst emission level. 2. C.F (dB/m) = Antenna Factor (dB/m) + Cable Loss (dB). 3. Measurement(dBV/m) = Reading(dBV) + C.F (dB/m). Margin (dB) N/A -7.08 Limit (dBV/m) N/A 54.00 Detector Average Average 57 of 61 Report No.: 2408RSU020-U1 A.8 AC Conducted Emissions Test Result Site SIP-SR2 Test Engineer Arvin Ding Factor SIP-SR2-ENV216_101684_C EUT OmniAccess Stellar (OAW-AP1521) Test Mode Transmit by BLE 1M at 2402MHz Test Date Temp./Humidity Polarity Test Voltage 2024-10-09 24.1C /52.6% Line AC 120V/60Hz Frequency No Mark (MHz) Reading (dBV) C.F Measurement (dB) (dBV) 1 0.150 23.09 9.65 32.75 2 * 0.150 42.86 9.65 52.52 3 0.166 19.28 9.66 28.93 4 0.166 40.52 9.66 50.17 5 0.178 19.08 9.66 28.73 6 0.178 39.13 9.66 48.79 7 0.226 11.30 9.71 21.01 8 0.226 30.68 9.71 40.39 9 0.266 10.53 9.72 20.25 10 0.266 26.00 9.72 35.72 11 0.366 9.95 9.73 19.69 12 0.366 19.77 9.73 29.50 Notes: 1. " *", means this data is the worst emission level. 2. C.F (dB) = LISN Factor (dB) + Cable Loss (dB). 3. Measurement (dBV) = Reading (dBV) + C.F (dB). Margin (dB) -23.25 -13.48 -26.23 -14.98 -25.84 -15.79 -31.59 -22.20 -30.99 -25.52 -28.91 -29.09 58 of 61 Limit (dBV) 56.00 66.00 55.16 65.16 54.58 64.58 52.60 62.60 51.24 61.24 48.59 58.59 Detector Average QP Average QP Average QP Average QP Average QP Average QP Report No.: 2408RSU020-U1 Site Test Engineer Factor EUT Test Mode SIP-SR2 Arvin Ding SIP-SR2-ENV216_101684_C OmniAccess Stellar (OAW-AP1521) Transmit by BLE 1M at 2402MHz Test Date Temp./Humidity Polarity Test Voltage 2024-10-09 24.1C /52.6% Neutral AC 120V/60Hz Frequency No Mark (MHz) Reading (dBV) C.F Measurement (dB) (dBV) 1 0.154 23.39 9.68 33.07 2 * 0.154 42.52 9.68 52.20 3 0.174 19.42 9.68 29.10 4 0.174 39.35 9.68 49.03 5 0.190 16.28 9.69 25.98 6 0.190 36.72 9.69 46.42 7 0.242 13.39 9.74 23.13 8 0.242 28.86 9.74 38.60 9 0.266 9.91 9.74 19.65 10 0.266 25.36 9.74 35.10 11 0.390 14.66 9.76 24.42 12 0.390 23.24 9.76 33.00 Notes: 1. " *", means this data is the worst emission level. 2. C.F (dB) = LISN Factor (dB) + Cable Loss (dB). 3. Measurement (dBV) = Reading (dBV) + C.F (dB). 59 of 61 Margin (dB) -22.71 -13.58 -25.66 -15.74 -28.06 -17.62 -28.90 -23.43 -31.60 -26.14 -23.64 -25.06 Limit (dBV) 55.78 65.78 54.77 64.77 54.04 64.04 52.03 62.03 51.24 61.24 48.06 58.06 Detector Average QP Average QP Average QP Average QP Average QP Average QP Appendix B - Test Setup Photograph Refer to "2408RSU020-UT" file. Report No.: 2408RSU020-U1 60 of 61 Appendix C - EUT Photograph Refer to "2408RSU020-UE" file. Report No.: 2408RSU020-U1 The End 61 of 61
Related FCC IDs:
- 2AI9TOAW-AP152X - ALE USA Inc. OmniAccess Stellar [OAW-AP152X] Microsoft Word 适用于 Microsoft 365 Microsoft Word 适用于 Microsoft 365