Data Sheet DHCE 6/50 - stiebel-eltron.com.au
Free Call 1800 153 351 www.stiebel.com.au. 01 02. STIEBEL ELTRON is committed to our policy of continual improvement, some features may have subsequently been changed or even removed.
Not Your Device? Search For Manuals or Datasheets below:
File Info : application/pdf, 2 Pages, 1.03MB
Document DEVICE REPORT1540529201 STIEBEL ELTRON DHCE 6 50 DATA SHEET AUGUST 20151Data Sheet DHCE 6/50 Instantaneous Single Phase Electric Water Heater Delivers hot water not exceeding 50°Celsius in accordance with AS3498* The advantages > Electronically controlled to save energy and water > Temperature selection up to a maximum of 50°Celsius in accordance with AS3498* > No external temperature control device required* > Ideal for low flow applications with a switch on flow rate of only 1.5L/min > Three selectable temperatures for greater convenience, note that output temperature will be impacted by cold water inlet temperature > : 40°C > : 45°C > : 50°C > No flue, ventilation or safe tray required > Compact design for space saving installation flexibility > Available in electrical size: > DHCE 6/50 - 7.1kW, 30 Amps per phase, single phase 240V > WaterMark approved, licence number WMKA21273, AS3498 50°C Ideal installation areas^ > Basin For more information on the right Stiebel Eltron water heater for your project please contact our Technical Services Department on free call 1800 153 351 (Australia). Data Sheet DHCE 6/50 AUG 2015 *This appliance delivers hot water not exceeding 50°Celsius in accordance with AS3498. Refer to AS/NZS3500.4, local requirements and installation instructions to determine if additional delivery temperature control is required. ^Dependent on model selected Free Call 1800 153 351 | www.stiebel.com.au 01 | 02 Data Sheet DHCE 6/50 Instantaneous Single Phase Electric Water Heater Delivers hot water not exceeding 50°Celsius in accordance with AS3498* Model number Rated output (240V) Rated current (240V) Phases Electrical installation Installation requirements Switch on flow rate Permissible operating pressure Temperature adjustment IP Rating Height Width Depth Weight (filled with water) Colour Nominal capacity Approvals Equipment For one/several draw off points Heating system Electronic flow rate control Electronic air detection system Accepts pre-heated water (solar) Programmable temperature Wellness shower programs ECO energy & water function Optional accessories Radio remote control primary Radio remote control secondary SINGLE PHASE ELECTRIC DHCE 6/50 7.1kW 30 Amp 1/N/PE/AC 220..240V As per AS/NZS3000 AS/NZS3500.4.2 & local requirements 1.5 L/min 1000 kPa 40°C 45°C 50°C IP25 360 mm 200 mm 110 mm 2.45 kg silver look 0.45L WaterMark Lic No. WMKA21273. AS3498 Selecting the right Stiebel Eltron instantaneous water heater Thank you for considering the Stiebel Eltron instantaneous water heater, with over 90 years of hot water technology experience we are sure you will be happy with your choice of a Stiebel Eltron instantaneous water heater. The temperature rise table will assist you in determining the appropriate size of instantaneous water heater required for your application. The required temperatures at specific flow rates will determine the size of system needed. Our customer support representatives can be contacted on our free call number 1800 153 351 to assist in selecting the appropriate system/systems for your project. Installation close to the point of use The Stiebel Eltron DHCE instant water heaters compact design allows for ease of installation close to the point of use. In order to minimise thermal losses in the pipe work the water heater should be installed as close to the point of use as possible. Electrical installation This water heater must be installed in accordance with AS/NZS3000 electrical regulations by a qualified installer. Yes/Yes Tubular - - Plumbing installation This water heater must be installed in accordance with AS/NZS3500.4.2 and local authority regulations by a qualified installer. Warranty For full warranty information please visit www.stiebel.com.au. Technical Support Stiebel Eltron (Aust) Pty Ltd Free Call (Australia): 1800 153 351 Telephone: (03) 9645 1833 Website: stiebel.com.au Temperature rise chart^ DHCE 6/50 Add the below temperature to the cold water inlet temperature. Temperature will also be dependent on the output dial setting. 4L/min 25°C 6L/min 16°C 8L/min 13°C 10L/min - 12L/min - 14L/min - ^Please note temperature rise is based on connection to 240V. Our customer support representatives can be contacted on our free call number 1800 153 351 to assist in selecting the appropriate system/systems for your project. 50 mm. DHCE 6/50 instantaneous single phase electric water heater 65 mm 264 mm. 270 mm. 360 mm. 280 mm. 9 mm. G1/2 59 mm. 100 mm 200 mm Hot water outlet Cold water inlet G1/2 35 mm 110 mm. Data Sheet DHCE 6/50 AUG 2015 STIEBEL ELTRON is committed to our policy of continual improvement, some features may have subsequently been changed or even removed. Our advisors will be happy to consult with you regarding the currently applicable equipment features. The images used in this brochure are for reference only. Free Call 1800 153 351 | www.stiebel.com.au 01 | 02Adobe PDF Library 9.9 Adobe InDesign CS5.5 (7.5.3)