Panman

SAR Test Report Appendix B - SAR Measurement Plots Part 3

Huawei Device Co., Ltd EVE Smart Phone 2ATEYEVE 2ATEYEVE eve

PDF Viewing Options

Not Your Device? Search For Manuals or Datasheets below:


File Info : application/pdf, 14 Pages, 4.09MB

Document DEVICE REPORTGetApplicationAttachment.html?id=6178903 
Date: 2022-09-24 Place of testing: HUAWEI SAR/HAC Lab
EVE-LX3 LTE Band 26 15M QPSK 1RB 38 Offset 26765CH Right Cheek
DUT: EVE-LX3; Type: Smart Phone; Serial: DASY3 Communication System: UID 0, LTE-FDD (SC-FDMA, 15MHz, QPSK/16-QAM) (0); Frequency: 821.5 MHz;Duty Cycle: 1:1 Medium parameters used (interpolated): f = 821.5 MHz;  = 0.888 S/m; r = 42.194;  = 1000 kg/m3 Phantom section: Right Section DASY Configuration:
l Probe: EX3DV4 - SN3744; ConvF(9.16, 9.16, 9.16) @ 821.5 MHz; Calibrated: 2022-08-09 l Sensor-Surface: 1.4mm (Mechanical Surface Detection), z = 1.0, 31.0 l Electronics: DAE4 Sn1492; Calibrated: 2022-08-04 l Phantom: SAM1; Type: SAM; Serial: 1475 l DASY52 52.10.4(1527); SEMCAD X 14.6.14(7483)
Configuration/Head/Area Scan (9x14x1): Measurement grid: dx=15mm, dy=15mm
Maximum value of SAR (measured) = 0.395 W/kg
Configuration/Head/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm,
dz=5mm Reference Value = 18.18 V/m; Power Drift = 0.02 dB Peak SAR (extrapolated) = 0.485 W/kg SAR(1 g) = 0.318 W/kg; SAR(10 g) = 0.203 W/kg Smallest distance from peaks to all points 3 dB below = 18.6 mm Ratio of SAR at M2 to SAR at M1 = 67% Maximum value of SAR (measured) = 0.422 W/kg
0 dB = 0.422 W/kg = -3.75 dBW/kg

Date: 2022-09-24 Place of testing: HUAWEI SAR/HAC Lab
EVE-LX3 LTE Band 26 15M QPSK 1RB 38 Offset 26865CH Back Side 15mm
DUT: EVE-LX3; Type: Smart Phone; Serial: DASY3 Communication System: UID 0, LTE-FDD (SC-FDMA, 15MHz, QPSK/16-QAM) (0); Frequency: 831.5 MHz;Duty Cycle: 1:1 Medium parameters used (interpolated): f = 831.5 MHz;  = 0.891 S/m; r = 42.163;  = 1000 kg/m3 Phantom section: Flat Section DASY Configuration:
l Probe: EX3DV4 - SN3744; ConvF(9.16, 9.16, 9.16) @ 831.5 MHz; Calibrated: 2022-08-09 l Sensor-Surface: 1.4mm (Mechanical Surface Detection), z = 1.0, 31.0 l Electronics: DAE4 Sn1492; Calibrated: 2022-08-04 l Phantom: SAM1; Type: SAM; Serial: 1475 l DASY52 52.10.4(1527); SEMCAD X 14.6.14(7483)
Configuration/Body/Area Scan (9x14x1): Measurement grid: dx=15mm, dy=15mm
Maximum value of SAR (measured) = 0.375 W/kg
Configuration/Body/Zoom Scan (6x6x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm,
dz=5mm Reference Value = 19.17 V/m; Power Drift = -0.01 dB Peak SAR (extrapolated) = 0.431 W/kg SAR(1 g) = 0.320 W/kg; SAR(10 g) = 0.226 W/kg Smallest distance from peaks to all points 3 dB below = 25.8 mm Ratio of SAR at M2 to SAR at M1 = 74% Maximum value of SAR (measured) = 0.397 W/kg
0 dB = 0.397 W/kg = -4.01 dBW/kg

Date: 2022-09-24 Place of testing: HUAWEI SAR/HAC Lab
EVE-LX3 LTE Band 26 15M QPSK 1RB 38 Offset 26865CH Back Side 10mm
DUT: EVE-LX3; Type: Smart Phone; Serial: DASY3 Communication System: UID 0, LTE-FDD (SC-FDMA, 15MHz, QPSK/16-QAM) (0); Frequency: 831.5 MHz;Duty Cycle: 1:1 Medium parameters used (interpolated): f = 831.5 MHz;  = 0.891 S/m; r = 42.163;  = 1000 kg/m3 Phantom section: Flat Section DASY Configuration:
l Probe: EX3DV4 - SN3744; ConvF(9.16, 9.16, 9.16) @ 831.5 MHz; Calibrated: 2022-08-09 l Sensor-Surface: 1.4mm (Mechanical Surface Detection), z = 1.0, 31.0 l Electronics: DAE4 Sn1492; Calibrated: 2022-08-04 l Phantom: SAM1; Type: SAM; Serial: 1475 l DASY52 52.10.4(1527); SEMCAD X 14.6.14(7483)
Configuration/Body/Area Scan (9x14x1): Measurement grid: dx=15mm, dy=15mm
Maximum value of SAR (measured) = 0.632 W/kg
Configuration/Body/Zoom Scan (9x8x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm,
dz=5mm Reference Value = 22.14 V/m; Power Drift = -0.08 dB Peak SAR (extrapolated) = 0.763 W/kg SAR(1 g) = 0.510 W/kg; SAR(10 g) = 0.359 W/kg Smallest distance from peaks to all points 3 dB below = 24 mm Ratio of SAR at M2 to SAR at M1 = 63.9% Maximum value of SAR (measured) = 0.663 W/kg
0 dB = 0.663 W/kg = -1.78 dBW/kg

Date: 2022-10-13 Place of testing: HUAWEI SAR/HAC Lab
EVE-LX3 LTE Band 38 20M QPSK 1RB 0 Offset 37850CH Right Cheek Battery3 With Non-metallic protective case
DUT: EVE-LX3; Type: Smart Phone; Serial: DASY5 Communication System: UID 0, LTE-TDD (SC-FDMA, 20MHz, QPSK/16-QAM) (0); Frequency: 2580 MHz;Duty Cycle: 1:1.57943 Medium parameters used: f = 2580 MHz;  = 1.996 S/m; r = 39.201;  = 1000 kg/m3 Phantom section: Right Section DASY Configuration:
l Probe: EX3DV4 - SN7381; ConvF(7.77, 7.77, 7.77) @ 2580 MHz; Calibrated: 2021-11-24 l Sensor-Surface: 1.4mm (Mechanical Surface Detection), z = 1.0, 31.0 l Electronics: DAE4 Sn1235; Calibrated: 2021-11-22 l Phantom: SAM7; Type: SAM; Serial: 1594 l DASY52 52.10.4(1527); SEMCAD X 14.6.14(7483)
Configuration/Head/Area Scan (10x17x1): Measurement grid: dx=12mm, dy=12mm
Maximum value of SAR (measured) = 1.23 W/kg
Configuration/Head/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm,
dz=5mm Reference Value = 29.77 V/m; Power Drift = -0.07 dB Peak SAR (extrapolated) = 2.14 W/kg SAR(1 g) = 0.777 W/kg; SAR(10 g) = 0.308 W/kg Smallest distance from peaks to all points 3 dB below = 5.1 mm Ratio of SAR at M2 to SAR at M1 = 40.4% Maximum value of SAR (measured) = 1.60 W/kg
0 dB = 1.60 W/kg = 2.04 dBW/kg

Date: 2022-10-13 Place of testing: HUAWEI SAR/HAC Lab
EVE-LX3 LTE Band 38 20M QPSK 50%RB 0 Offset 38150CH Back Side 15mm Battery3 With Non-metallic protective case
DUT: EVE-LX3; Type: Smart Phone; Serial: DASY5 Communication System: UID 0, LTE-TDD (SC-FDMA, 20MHz, QPSK/16-QAM) (0); Frequency: 2610 MHz;Duty Cycle: 1:1.57943 Medium parameters used (interpolated): f = 2610 MHz;  = 2.022 S/m; r = 39.147;  = 1000 kg/m3 Phantom section: Flat Section DASY Configuration:
l Probe: EX3DV4 - SN7381; ConvF(7.77, 7.77, 7.77) @ 2610 MHz; Calibrated: 2021-11-24 l Sensor-Surface: 1.4mm (Mechanical Surface Detection), z = 1.0, 31.0 l Electronics: DAE4 Sn1235; Calibrated: 2021-11-22 l Phantom: SAM7; Type: SAM; Serial: 1594 l DASY52 52.10.4(1527); SEMCAD X 14.6.14(7483)
Configuration/Body/Area Scan (10x17x1): Measurement grid: dx=12mm, dy=12mm
Maximum value of SAR (measured) = 0.800 W/kg
Configuration/Body/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm,
dz=5mm Reference Value = 4.440 V/m; Power Drift = -0.14 dB Peak SAR (extrapolated) = 1.20 W/kg SAR(1 g) = 0.597 W/kg; SAR(10 g) = 0.281 W/kg Smallest distance from peaks to all points 3 dB below = 9 mm Ratio of SAR at M2 to SAR at M1 = 51.9% Maximum value of SAR (measured) = 0.976 W/kg
0 dB = 0.976 W/kg = -0.11 dBW/kg

Date: 2022-10-12 Place of testing: HUAWEI SAR/HAC Lab
EVE-LX3 LTE Band 38 20M QPSK 1RB 0 Offset 38150CH Back Side 10mm With Non-metallic protective case
DUT: EVE-LX3; Type: Smart Phone; Serial: DASY5 Communication System: UID 0, LTE-TDD (SC-FDMA, 20MHz, QPSK/16-QAM) (0); Frequency: 2610 MHz;Duty Cycle: 1:1.57943 Medium parameters used (interpolated): f = 2610 MHz;  = 2.022 S/m; r = 39.147;  = 1000 kg/m3 Phantom section: Flat Section DASY Configuration:
l Probe: EX3DV4 - SN7381; ConvF(7.77, 7.77, 7.77) @ 2610 MHz; Calibrated: 2021-11-24 l Sensor-Surface: 1.4mm (Mechanical Surface Detection), z = 1.0, 31.0 l Electronics: DAE4 Sn1235; Calibrated: 2021-11-22 l Phantom: SAM7; Type: SAM; Serial: 1594 l DASY52 52.10.4(1527); SEMCAD X 14.6.14(7483)
Configuration/Body/Area Scan (10x18x1): Measurement grid: dx=12mm, dy=12mm
Maximum value of SAR (measured) = 1.34 W/kg
Configuration/Body/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm,
dz=5mm Reference Value = 4.275 V/m; Power Drift = 0.13 dB Peak SAR (extrapolated) = 1.72 W/kg SAR(1 g) = 0.806 W/kg; SAR(10 g) = 0.344 W/kg Smallest distance from peaks to all points 3 dB below = 7 mm Ratio of SAR at M2 to SAR at M1 = 51.2% Maximum value of SAR (measured) = 1.34 W/kg
0 dB = 1.34 W/kg = 1.27 dBW/kg

Date: 2022-10-13 Place of testing: HUAWEI SAR/HAC Lab
EVE-LX3 LTE Band 38 20M QPSK 1RB 0 Offset 38000CH Back Side 0mm Battery3 With Non-metallic protective case
DUT: EVE-LX3; Type: Smart Phone; Serial: DASY5 Communication System: UID 0, LTE-TDD (SC-FDMA, 20MHz, QPSK/16-QAM) (0); Frequency: 2595 MHz;Duty Cycle: 1:1.57943 Medium parameters used: f = 2595 MHz;  = 2.007 S/m; r = 39.175;  = 1000 kg/m3 Phantom section: Flat Section DASY Configuration:
l Probe: EX3DV4 - SN7381; ConvF(7.77, 7.77, 7.77) @ 2595 MHz; Calibrated: 2021-11-24 l Sensor-Surface: 1.4mm (Mechanical Surface Detection), z = 1.0, 31.0 l Electronics: DAE4 Sn1235; Calibrated: 2021-11-22 l Phantom: SAM7; Type: SAM; Serial: 1594 l DASY52 52.10.4(1527); SEMCAD X 14.6.14(7483)
Configuration/Body/Area Scan (10x17x1): Measurement grid: dx=12mm, dy=12mm
Maximum value of SAR (measured) = 4.95 W/kg
Configuration/Body/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm,
dz=5mm Reference Value = 4.607 V/m; Power Drift = -0.05 dB Peak SAR (extrapolated) = 11.7 W/kg SAR(1 g) = 3.65 W/kg; SAR(10 g) = 1.12 W/kg Smallest distance from peaks to all points 3 dB below = 4 mm Ratio of SAR at M2 to SAR at M1 = 44.8% Maximum value of SAR (measured) = 6.42 W/kg
0 dB = 6.42 W/kg = 8.08 dBW/kg

Date: 2022-09-27 Place of testing: HUAWEI SAR/HAC Lab
EVE-LX3 LTE Band 66 10M QPSK 50%RB 0 Offset 132572CH Right Tilt
DUT: EVE-LX3; Type: Smart Phone; Serial: DASY3 Communication System: UID 0, LTE-FDD (SC-FDMA, 20MHz, QPSK/16-QAM) (0); Frequency: 1770 MHz;Duty Cycle: 1:1 Medium parameters used: f = 1770 MHz;  = 1.375 S/m; r = 38.854;  = 1000 kg/m3 Phantom section: Right Section DASY Configuration:
l Probe: EX3DV4 - SN3744; ConvF(8.08, 8.08, 8.08) @ 1770 MHz; Calibrated: 2022-08-09 l Sensor-Surface: 1.4mm (Mechanical Surface Detection), z = 1.0, 31.0 l Electronics: DAE4 Sn1492; Calibrated: 2022-08-04 l Phantom: SAM1; Type: SAM; Serial: 1475 l DASY52 52.10.4(1527); SEMCAD X 14.6.14(7483)
Configuration/Head/Area Scan (9x14x1): Measurement grid: dx=15mm, dy=15mm
Maximum value of SAR (measured) = 0.837 W/kg
Configuration/Head/Zoom Scan (6x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm,
dz=5mm Reference Value = 24.92 V/m; Power Drift = -0.07 dB Peak SAR (extrapolated) = 1.44 W/kg SAR(1 g) = 0.723 W/kg; SAR(10 g) = 0.340 W/kg Smallest distance from peaks to all points 3 dB below = 6.4 mm Ratio of SAR at M2 to SAR at M1 = 58.9% Maximum value of SAR (measured) = 1.04 W/kg
0 dB = 1.04 W/kg = 0.15 dBW/kg

Date: 2022-09-27 Place of testing: HUAWEI SAR/HAC Lab
EVE-LX3 LTE Band 66 20M QPSK 1RB 0 Offset 132322CH Back Side 15mm
DUT: EVE-LX3; Type: Smart Phone; Serial: DASY3 Communication System: UID 0, LTE-FDD (SC-FDMA, 20MHz, QPSK/16-QAM) (0); Frequency: 1745 MHz;Duty Cycle: 1:1 Medium parameters used: f = 1745 MHz;  = 1.359 S/m; r = 38.875;  = 1000 kg/m3 Phantom section: Flat Section DASY Configuration:
l Probe: EX3DV4 - SN3744; ConvF(8.08, 8.08, 8.08) @ 1745 MHz; Calibrated: 2022-08-09 l Sensor-Surface: 1.4mm (Mechanical Surface Detection), z = 1.0, 31.0 l Electronics: DAE4 Sn1492; Calibrated: 2022-08-04 l Phantom: SAM1; Type: SAM; Serial: 1475 l DASY52 52.10.4(1527); SEMCAD X 14.6.14(7483)
Configuration/Body/Area Scan (9x14x1): Measurement grid: dx=15mm, dy=15mm
Maximum value of SAR (measured) = 0.579 W/kg
Configuration/Body/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm,
dz=5mm Reference Value = 9.541 V/m; Power Drift = 0.03 dB Peak SAR (extrapolated) = 0.761 W/kg SAR(1 g) = 0.443 W/kg; SAR(10 g) = 0.247 W/kg Smallest distance from peaks to all points 3 dB below = 11.5 mm Ratio of SAR at M2 to SAR at M1 = 58.6% Maximum value of SAR (measured) = 0.651 W/kg
0 dB = 0.651 W/kg = -1.86 dBW/kg

Date: 2022-09-27 Place of testing: HUAWEI SAR/HAC Lab
EVE-LX3 LTE Band 66 20M QPSK 1RB 99 Offset 132072CH Back Side 10mm
DUT: EVE-LX3; Type: Smart Phone; Serial: DASY3 Communication System: UID 0, LTE-FDD (SC-FDMA, 20MHz, QPSK/16-QAM) (0); Frequency: 1720 MHz;Duty Cycle: 1:1 Medium parameters used: f = 1720 MHz;  = 1.344 S/m; r = 38.872;  = 1000 kg/m3 Phantom section: Flat Section DASY Configuration:
l Probe: EX3DV4 - SN3744; ConvF(8.08, 8.08, 8.08) @ 1720 MHz; Calibrated: 2022-08-09 l Sensor-Surface: 1.4mm (Mechanical Surface Detection), z = 1.0, 31.0 l Electronics: DAE4 Sn1492; Calibrated: 2022-08-04 l Phantom: SAM1; Type: SAM; Serial: 1475 l DASY52 52.10.4(1527); SEMCAD X 14.6.14(7483)
Configuration/Body/Area Scan (9x14x1): Measurement grid: dx=15mm, dy=15mm
Maximum value of SAR (measured) = 0.574 W/kg
Configuration/Body/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm,
dz=5mm Reference Value = 10.86 V/m; Power Drift = 0.00 dB Peak SAR (extrapolated) = 1.12 W/kg SAR(1 g) = 0.598 W/kg; SAR(10 g) = 0.309 W/kg Smallest distance from peaks to all points 3 dB below = 9.1 mm Ratio of SAR at M2 to SAR at M1 = 56.4% Maximum value of SAR (measured) = 0.936 W/kg
0 dB = 0.936 W/kg = -0.29 dBW/kg

Date: 2022-09-16 Place of testing: HUAWEI SAR/HAC Lab
EVE-LX3 2.4G Wi-Fi 802.11n 40M 6CH Left Cheek
DUT: EVE-LX3; Type: Smart Phone; Serial: DASY5 Communication System: UID 0, WiFi(802.11a/b/g/n) (0); Frequency: 2437 MHz;Duty Cycle: 1:1.01 Medium parameters used (interpolated): f = 2437 MHz;  = 1.827 S/m; r = 38.633;  = 1000 kg/m3 Phantom section: Left Section DASY Configuration:
l Probe: EX3DV4 - SN7505; ConvF(7.61, 7.61, 7.61) @ 2437 MHz; Calibrated: 2022-04-28 l Sensor-Surface: 1.4mm (Mechanical Surface Detection), z = 1.0, 31.0 l Electronics: DAE4 Sn1235; Calibrated: 2021-11-22 l Phantom: SAM7; Type: SAM; Serial: 1594 l DASY52 52.10.4(1527); SEMCAD X 14.6.14(7483)
Configuration/Head/Area Scan (11x17x1): Measurement grid: dx=12mm, dy=12mm
Info: Interpolated medium parameters used for SAR evaluation. Maximum value of SAR (measured) = 0.148 W/kg
Configuration/Head/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm,
dz=5mm Reference Value = 4.697 V/m; Power Drift = -0.18 dB Peak SAR (extrapolated) = 0.198 W/kg SAR(1 g) = 0.110 W/kg; SAR(10 g) = 0.062 W/kg Smallest distance from peaks to all points 3 dB below = 9.2 mm Ratio of SAR at M2 to SAR at M1 = 55.8% Info: Interpolated medium parameters used for SAR evaluation. Maximum value of SAR (measured) = 0.162 W/kg
0 dB = 0.162 W/kg = -7.92 dBW/kg

Date: 2022-09-16 Place of testing: HUAWEI SAR/HAC Lab
EVE-LX3 2.4G Wi-Fi 802.11b 6CH Back Side 15mm with Battery2
DUT: EVE-LX3; Type: Smart Phone; Serial: DASY5 Communication System: UID 0, WiFi(802.11a/b/g/n) (0); Frequency: 2437 MHz;Duty Cycle: 1:1.00972 Medium parameters used (interpolated): f = 2437 MHz;  = 1.827 S/m; r = 38.633;  = 1000 kg/m3= Phantom section: Flat Section DASY Configuration:
l Probe: EX3DV4 - SN7505; ConvF(7.61, 7.61, 7.61) @ 2437 MHz; Calibrated: 2022-04-28 l Sensor-Surface: 1.4mm (Mechanical Surface Detection), z = 1.0, 31.0 l Electronics: DAE4 Sn1235; Calibrated: 2021-11-22 l Phantom: SAM7; Type: SAM; Serial: 1594 l DASY52 52.10.4(1527); SEMCAD X 14.6.14(7483)
Configuration/Body/Area Scan (10x17x1): Measurement grid: dx=12mm, dy=12mm
Maximum value of SAR (measured) = 0.241 W/kg
Configuration/Body/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm,
dz=5mm Reference Value = 5.244 V/m; Power Drift = -0.05 dB Peak SAR (extrapolated) = 0.270 W/kg SAR(1 g) = 0.182 W/kg; SAR(10 g) = 0.105 W/kg Smallest distance from peaks to all points 3 dB below = 12 mm Ratio of SAR at M2 to SAR at M1 = 66.9% Maximum value of SAR (measured) = 0.243 W/kg
0 dB = 0.243 W/kg = -6.14 dBW/kg

Date: 2022-09-16 Place of testing: HUAWEI SAR/HAC Lab
EVE-LX3 2.4G Wi-Fi 802.11b 6CH Back Side 10mm with Battery2
DUT: EVE-LX3; Type: Smart Phone; Serial: DASY5 Communication System: UID 0, WiFi(802.11a/b/g/n) (0); Frequency: 2437 MHz;Duty Cycle: 1:1.00972 Medium parameters used (interpolated): f = 2437 MHz;  = 1.827 S/m; r = 38.633;  = 1000 kg/m3= Phantom section: Flat Section DASY Configuration:
l Probe: EX3DV4 - SN7505; ConvF(7.61, 7.61, 7.61) @ 2437 MHz; Calibrated: 2022-04-28 l Sensor-Surface: 1.4mm (Mechanical Surface Detection), z = 1.0, 31.0 l Electronics: DAE4 Sn1235; Calibrated: 2021-11-22 l Phantom: SAM7; Type: SAM; Serial: 1594 l DASY52 52.10.4(1527); SEMCAD X 14.6.14(7483)
Configuration/Body/Area Scan (10x17x1): Measurement grid: dx=12mm, dy=12mm
Maximum value of SAR (measured) = 0.520 W/kg
Configuration/Body/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm,
dz=5mm Reference Value = 5.766 V/m; Power Drift = 0.01 dB Peak SAR (extrapolated) = 0.595 W/kg SAR(1 g) = 0.378 W/kg; SAR(10 g) = 0.205 W/kg Smallest distance from peaks to all points 3 dB below = 10.2 mm Ratio of SAR at M2 to SAR at M1 = 64.7% Maximum value of SAR (measured) = 0.532 W/kg
0 dB = 0.532 W/kg = -2.74 dBW/kg

Date: 2022-09-17 Place of testing: HUAWEI SAR/HAC Lab
EVE-LX3 BT 39CH Left Cheek
DUT: EVE-LX3; Type: Smart Phone; Serial: DASY5 Communication System: UID 0, BT (0); Frequency: 2441 MHz;Duty Cycle: 1:1.299 Medium parameters used (interpolated): f = 2441 MHz;  = 1.83 S/m; r = 38.622;  = 1000 kg/m3 Phantom section: Left Section DASY Configuration:
l Probe: EX3DV4 - SN7505; ConvF(7.61, 7.61, 7.61) @ 2441 MHz; Calibrated: 2022-04-28 l Sensor-Surface: 1.4mm (Mechanical Surface Detection), z = 1.0, 31.0 l Electronics: DAE4 Sn1235; Calibrated: 2021-11-22 l Phantom: SAM7; Type: SAM; Serial: 1594 l DASY52 52.10.4(1527); SEMCAD X 14.6.14(7483)
Configuration/Head/Area Scan (11x17x1): Measurement grid: dx=12mm, dy=12mm
Info: Interpolated medium parameters used for SAR evaluation. Maximum value of SAR (measured) = 0.0836 W/kg
Configuration/Head/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm,
dz=5mm Reference Value = 1.378 V/m; Power Drift = 0.14 dB Peak SAR (extrapolated) = 0.114 W/kg SAR(1 g) = 0.062 W/kg; SAR(10 g) = 0.032 W/kg Smallest distance from peaks to all points 3 dB below: Larger than measurement grid Ratio of SAR at M2 to SAR at M1 = 54.6% Info: Interpolated medium parameters used for SAR evaluation. Maximum value of SAR (measured) = 0.0927 W/kg
0 dB = 0.0927 W/kg = -10.33 dBW/kg

Related FCC IDs:

Search Any Device: