duplex DS24V2US Radio Control System User Manual

User Manual pt. 1.1

JETI model s.r.o. DS24V2US Transmitter Duplex 2A7CJ-DS24V2US 2A7CJDS24V2US ds24v2us

User Manual for duplex models including: 2A7CJ-DS24V2US, 2A7CJDS24V2US, ds24v2us, DS24V2US Radio Control System, DS24V2US, Radio Control System, Control System, System

PDF Viewing Options

Not Your Device? Search For Manuals or Datasheets below:

File Info : application/pdf, 11 Pages, 3.79MB

Document DEVICE REPORTGetApplicationAttachment.html?id=8366528

radio control system

1.6 Technical Support

to be the start of theWarranty Period. Statutory Rights

If you feel uncertain about how to set up particular transmitter

This Warranty is given independently of any statutory rights that

functions, do not hesitate to take advantage of our technical

may apply in the country of purchase and does not ffect or limit such

support:

statutory rights in any manner what so ever.

1. General

1. Web Site

JETI warrants the Product to be free from defects in workmanship

Either the JETI model (manufacturer) or your local distributor's web

and materials for the Warranty Period. The Warranty does not cover

sites offer a wide range of support for the DC transmitters. You will find

bundled accessories, which were delivered together with the

advice, tips or frequently asked questions (FAQ) which, in most cases,

Product such as: cables, charger, case etc. If the Product fails during

contain the answers to your questions.

normal and proper use within the Warranty Period, JETI will repair or

2. Distributor, Manufacturer

replace the defective parts of the Product, or the Product itself, with new or reconditioned parts or products that are functionally

You may also find support at your local hobby shop, distributor, or

equivalent or superior to those originally supplied.

directly with the manufacturer JETI model s.r.o.

This Warranty applies only if the Product was newly manufactured

on the Date of Purchase and not sold as used, refurbished or

1.7 Warranty - warranty card

manufacturing seconds. Please keep the original purchase invoice for future service request. This Warranty does not include failure

This JETI manufacturer warranty (hereafter referred to as the

caused by improper installation, operation, cleaning or

"Warranty") is granted by JETI model s.r.o. (hereafter referred to as

maintenance, accident, damage, misuse, abuse, non-JETI

"JETI") to the purchaser (hereafter referred to as "You") DUPLEX

modifications to the product, normal wear and tear or any other

transmitters (hereinafter referred to as the "Product"). This warranty

event, act, default or omission outside JETI control.

card is being delivered with the Product, subject to the following

For further details, see section 4 of this Warranty Card. All

terms and conditions. JETI accredited Service Agents and Repair

components that an JETI Service Center repaired or replaced will be

Centers will provide the services covered under thisWarranty.

under warranty for three months or for the remainder of the

Warranty Period of the Product:

warranty period, whichever is applicable. The Repair Center may

This warranty is valid for 24 months. If proof of purchase cannot be

recover the originally configured system bundled with the Product.

provided, the manufacture date as recorded by JETI will be deemed 11

radio control system

JETI will not restore or transfer any data or software from the Product's original storage media. If the Product is replaced or refund, all user generated data may be permanently deleted. If the Product is under Warranty, You hereby agree to transfer the ownership of replaced defective parts and such parts shall automatically become the property of JETI. 2. Customer Responsibility When using the Product Read the user manual first and use the Product only according to the user manual. Periodically back up your data stored on the Product. Technical support line phone number can be found at http://www.jetimodel.com/support. Ensure that You have fully backed up all the data stored on Your Product before any service process is started. You agree that JETI may delete any data or LUA aplications installed on the Product without restoring them. JETI shall not be held liable for the permanent loss, damage, or misuse of your data. Pack the Product in safe and stable packaging and make sure that all accessories are in the package. The original packaging may be useful for this purpose. JETI shall have no liability for the loss, damage or destruction of accessories or removable storage devices, unless they are caused by willful of gross negligent acts by JETI. 3.Warranty Service If you have a defective product, you must send it to Fy JETI Model or your dealer for service. Use proof of purchase at the point of purchase of the product.

4. Exclusions from this LimitedWarranty Service JETI does not warrant uninterrupted or error-free operation of this Product, The Warranty only covers technical hardware issues during the Warranty Period and in normal use conditions. It applies to firmware issues but not to any other software issues or customer induced damages or circumstances such as but not limited to: a) Damage caused to this Product(s) by you or any non-authorized
third party; b) The serial number of the Product, components or accessories has
been altered, cancelled or removed; c) Obsolescence; d) Damage (accidental or otherwise) to the Product that does not
impact the Product's operation and functions, such as without limitation to rust, change in color, texture or finish, wear and tear, and gradual deterioration; e) Damage to the Product caused by improper installation, improper connection or malfunction of a peripheral device such as printer, optical drive, network card, or USB device, etc. 5. Limitation of Liability Except as provided in this Warranty and to the maximum extent permitted by law, JETI is not responsible for direct, special, incidental or consequential damages resulting from any breach of warranty or condition, or under any other legal theory, including but not limited to loss of use; loss of revenue; loss of, damage to or corruption of data; or any indirect or consequential loss or damage whatsoever caused including the replacement of equipment and property, any costs of recovering or reproducing any data stored on or used with

radio control system

the Product. The foregoing limitation shall not apply to death or

8. JETI Contact Details

personal injury claims, or any statutory liability for intentional and gross negligent acts and/ or omissions by JETI. Some jurisdictions do not allow the exclusion or limitation of incidental or consequential damages; to the extent such jurisdiction is governing this Warranty the above limitations do not apply to You. 6. Privacy

This Warranty is provided by: JETI model s.r.o. Lomená 1530 742 58 Píbor CZECHIA e-mail: [email protected], tel.: +420 556 802 092,

It is necessary for JETI to collect, process, and use Your personal data

in order to facilitate the requested service; and for this purpose Your

personal data may be transferred to, stored, processed or used by

JETI affiliated companies or JETI service providers. JETI committed

that all said transfer, storage, process or use of Your personal data

shall be subject to applicable laws on privacy protection and

personal data security and the"JETI Privacy

7.Warranty and Support

This Warranty applies in the country of purchase.

Product purchased in European Union is eligible for JETI Warranty

Service within European Union.

In thisWarranty:

Service procedures may vary by country. Some service and/or

replacement products may not be available in all countries.

Some countries may have fees and restrictions that apply at the time

of service.

JETI reserves the right to interpret the provisions in this JETI

Warranty Information. The information in this warranty card may

change without prior notice. Please visit the JETI Support site at

http://www.jetimodel.com/support for current and complete JETI

warrantyinformation. 13

radio control system

2 Technical data and description of the transmitter

2.1 Technical parameters
Parameters
Channels
Control inputs
Backup Modul 900MHz NG
(863 - 870 MHz - EU), (902 - 928 MHz - US), (918 - 926 MHz - Australia), (918 - 926 MHz - Asia)
Flight Modes
Free Mixes Data Graphs Audio Player Logical Switches Number of Remote Commands Servo Sequencer Timers Displayed Telemetry Values Sound on Events Alarms Vibration Alarms Voice Output MP3 Microphone Gyro Settings Servo Balancer Function Curves Throttle Limiter (heli) Trimy letových rezim

DC-24 II DS-24 II

Active

Parameters
Accelerometer Telemetry Controls Voice Commands Lua Apps Ditex Servo Telemetry Double Path RF modules 2.4GHz/900MHz NG Number of antenas 2.4GHz/900MHz Material Gimbals & Buttons Transmitter Frame Stick Resolution Gimbal Hall Sensors/Vibration Memory, SD Card
Backlight LCD
Bluetooth connectivity for headphones (Bluetooth audio)
Telemetry via Bluetooth for smartphones (Android/iOS)
Wi-Fi module Graphical interface JUI USB connector Weight (g) Transmitter Battery Pack (mAh) Transmitter Aluminium Case

DC-24 II DS-24 II

64 16 10 16 Active 2/1 4/1 Aluminium

Active 64 16 10 16
Active 2/1 4/1
Aluminium

Aluminium Aluminium

4096 Yes/Yes
8 GB
4" 480x480px Color, high backlight

4096
Yes/Yes
8 GB
4" 480x480px Color, high backlight

Active

Active
Noactive Ver. 2.0 Typ C 1490 Li-Ion 6200 Included

Active
Noactive Ver. 2.0 Typ C 1280 Li-Ion 6200 Included

radio control system
2.2 Description of the transmitter - DC-24II

7 2 3

10 17

20 18 21

4 11 19 12

5 21 15 13

6 1
14 15

EN
2.2.1 Control Identification DC-24II
1. Right Stick 1, 2 the DC-24II Transmitter Supports Modes 1-4, see Control Sticks -> mode change.
2. Left Stick 3, 4 the DC-24II Transmitter Supports Modes 1-4, see Control Sticks -> mode change
3. Swappable and Assignable Switches: Sa, Sb, Sc, Sd, Se, Sf, Sg, Sh, Si, Sj 4. DigitalTrims for the Left StickT3,T4 5. Digital Trims for the Right Stick T1, T2 6. Right Side Control Lever ,,5" 7. Left Side Control Lever ,,6" 8. Rotary Control Knob ,,7" 9. Rotary Control Knob ,,8" 10. LCD Display 11. Function Buttons ,,F1 F5" 12. Transmitter On/Off ,,Power Switch" 13. ,,3D" Control Selector 14. ,,Menu" Button 15. ,,ESC" Button 16. Antenna/ Transmitter Handle 17. USB-C connector (Charging/connecting to PC) 18. Headphone connector / PPM connector 19. LED Indicators 20. Speaker 21. Harness Bracket (optional accessory) Installation Holes 22. Microphone

radio control system

2.2.2 Assembly Identification DC-24II

23. Transmitter Battery Pack 24. Battery Connector 25. Memory Card Micro SD 8GB 26. PPM Output Connector 27. Left Gimbal Assembly

28. Right Gimbal Assembly 29. 2.4 GHz Module 30. 900MHz Module NG
(Next Generation) 31. Bluetooth/Wi-Fi module

28 30 29 25

31 26 27

radio control system
2.3 Description of the transmitter - DS-24II

2 7 3
4 12
19 20

10 6 1

8 5

EN
2.3.1 Control Identification DS-24II
1. Right Stick 1, 2 the DC-24II Transmitter Supports Modes 1-4, see Control Sticks -> mode change.
2. Left Stick 3, 4 the DC-24II Transmitter Supports Modes 1-4, see Control Sticks -> mode change
3. Swappable and Assignable Switches: Sa, Sb, Sc, Sd, Se, Sf, Sg, Sh, Si, Sj 4. DigitalTrims for the Left StickT3,T4 5. Digital Trims for the Right Stick T1, T2 6. Right Side Control Lever ,,5" 7. Left Side Control Lever ,,6" 8. Rotary Control Knob ,,7" 9. Rotary Control Knob ,,8" 10. LCD Display 11. Function Buttons ,,F1 F5" 12. Transmitter On/Off ,,Power Switch" 13. ,,3D" Control Selector 14. ,,Menu" Button 15. ,,ESC" Button 16. Antenna/ Transmitter Handle 17. USB-C connector (Charging/connecting to PC) 18. Headphone connector / PPM connector 19. LED Indicators 20. Speaker 21. Harness Bracket (optional accessory) Installation Holes 22. Microphone 23. Hanging eye for strap
17

radio control system

2.3.2 Assembly Identification DS-24II

24. Transmitter Battery Pack

30. 2.4 GHz Module

25. Battery Connector

31. 900MHz Module NG

26. Memory Card Micro SD 8GB

(Next Generation)

27. PPM Output Connector

32. Bluetooth/Wi-Fi module

28. Left Gimbal Assembly

33. Bluetooth/Wi-Fi antenna

29. Right Gimbal Assembly

31 30

26 27

25 32 33
24
18

radio control system 3 First start up of the transmitter 3.1 Turning the transmitter on/off
3.1.1 Turn on 1. The transmitter is turned on by long pressing the ,,POWER"
button. 2. Turning on has to be confirmed by pressing the "F5" button
below the display.
3. If turning on is not confirmed within the time limit of 10s, the transmitter will automatically turn off. This confirmation protects the transmitter against unwanted turning on, for example during transport.
4. the transmitter can be turned on even without confirmation if the item "Disable startup question" is set to "Yes" in the "Main menu 19

EN
/ System / Configuration" menu. In this case, the transmitter is turned on by a long press "POWER" button without confirmation.
Note: if the transmitter is connected to a charger or PC, the "Disable startup question" function is disabled.
3.1.2 Turn off 1. The transmitter is turned off by
pressing the "POWER" button. 2. Turning off the transmitter
requires confirmation with the "F5" button under the transmitter display.
if the shutdown process is not confirmed within the 10s time limit, the transmitter will automatically leave the shutdown menu and remain on.
transmitter shutdown confirmation is a safety feature that cannot be disabled.
Note: the transmitter can be turned off in an emergency (without saving the current changes) by simultaneously long pressing the "POWER" and "ESC" buttons.

radio control system
3.2 Language selection
The default language version of the transmitter is English. The language of the transmitter can be easily changed in the menu "Main menu/System/Configuration" item "Language".

3.3 Description of the "menu", "esc" and 3D button

the ,,3D" button is the basic controller for setting up the transmitter. By turning the rotary part of the 3D controller (a/b), you scroll through the menu items or set the specific value of the selected item. Pressing the 3D controller ( c ) opens the highlighted item or confirms the set value."
pressing "ESC" means "one step back".

c a
b DC
c a
b
DS

3.4 Bottom bar of the display
Some menu screens have a bar with up to five icons at the bottom. This bar and its icons are different for each window. Each icon is assigned its function and this is activated by pressing the button below the icon. When there is no icon above the button or it is not highlighted, the button has no function in this screen.
After turning on the transmitter, there is a screwdriver and wrench icon in the lower left corner of the start screen. Pressing the ,,F1" key (below this icon) opens the quick settings menu with the following options:

3.4.1 Telemetry

Enable or disable telemetry data. The setting is for the entire system,

i.e. all models in the transmitter's memory.

Possible settings:

,,OFF"

- no telemetry data will be displayed or

saved.

,,Receive On / Log off" - telemetry data will be displayed but not

stored in the transmitter's memory.

,,ON"

- telemetry data will be displayed and

stored in the transmitter's memory.

radio control system

Note: we recommend always having telemetry turned "On".
3.4.2 Volume The transmitter is equipped with a speaker and can notify of various events, alarms or reached limits by playing sound or voice output. The current volume setting is displayed in this menu.

Note: for example, suitable volume controls are potentiometers ,,P7" or ,,P8".
Note: if you assign a control to the volume control and turn it down to the minimum value, the sounds of the transmitter will be turned off completely (including alarms).

Audio volume detailed transmitter sound
settings can be found in "Main menu/System/Sound volume". the current set volume is displayed in the first line. the volume setting can be controlled from the menu or with the assigned controller, for example by potentiometer.

3.4.3 Backlight type

The backlight of the display can be set to:

,,OFF"

LCD backlight permanently off.

,,Duration 10s" after 10s of inactivity, the backlight turns off. Any

action of the controls turns the backlight on

again.

,,Duration 60s" after 60s of inactivity, the backlight turns off. Any

action of the controls turns the backlight on

again.

,,ON"

LCD backlight permanently on.

Potentiometer assignment: 1. Use the ,,3D" controller to select the "Volume" line and activate
the selection. 2. Move the potentiometer you want to control the volume, it will
be detected automatically. 3. To confirm, press the F5 (OK) button. 4. Press the 3D controller to confirm the selection. 5. Move the control you want to control the transmitter volume.

3.4.4 Intensity The intensity of the LCD backlight can be manually adjusted in 11 steps, or an "Automatic backlight" option can be selected, in which the transmitter adjusts the intensity according to the ambient light conditions.
Note: the time and the intensity of the backlight plays a significant role in energy consumption. In the case of permanent and intense backlighting of the display, the operating time of the

transmitter will be shortened.

References

Related FCC IDs:

2A7CJ-DS24V2US - JETI model s.r.o. Transmitter Duplex [-DS24V2US]

cairo 1.18.0 (https://cairographics.org) Mozilla Firefox 138.0.1