Sem
RF Exposure
Shenzhen Xinyin Technology Co., Ltd J6 WIRELESS EARPHONE 2BD43-J6 2BD43J6 j6
Not Your Device? Search For Manuals or Datasheets below:
File Info : application/pdf, 7 Pages, 276.22KB
Document DEVICE REPORTGetApplicationAttachment.html?id=7463636CCUT Testing & Certification
Report No: SSP24060144-2E
RF Exposure Report
FCC ID: 2BD43-J6
Report No.
: SSP24060144-2E
Applicant
: Shenzhen Xinyin Technology Co., Ltd
Product Name : WIRELESS EARPHONE
Model Name
: J6
Test Standard : FCC CFR 47 PART 2.1093
Date of Issue : 2024-07-01
Shenzhen CCUT Quality Technology Co., Ltd. 1F, Building 35, Changxing Technology Industrial Park, Yutang Street, Guangming District, Shenzhen,
Guangdong, China; (Tel.:+86-755-23406590 website: www.ccuttest.com)
This test report is limited to the above client company and the product model only. It may not be duplicated without prior permitted by Shenzhen CCUT Quality Technology Co., Ltd.
FCC Test Report
Page 1 of 7
CCUT Testing & Certification
Report No: SSP24060144-2E
Test Report Basic Information
Applicant..................................: Address of Applicant...............:
Shenzhen Xinyin Technology Co., Ltd Floor A3, Building B5, Anle Industrial Zone, No.172 Hangcheng Avenue, Baoan District, Shenzhen China
Manufacturer..........................: Address of Manufacturer........:
Shenzhen Xinyin Technology Co., Ltd Floor A3, Building B5, Anle Industrial Zone, No.172 Hangcheng Avenue, Baoan District, Shenzhen China
Product Name.........................: WIRELESS EARPHONE Brand Name.............................: Main Model..............................: J6 Series Models..........................: -
FCC CFR 47 PART 2.1093 Test Standard..........................: KDB 447498 D01 v06 Date of Test .............................: 2024-06-18 to 2024-06-19 Test Result...............................: PASSED
Tested By ................................:
(Colin Chen)
Reviewed By............................:
(Lieber Ouyang)
Authorized Signatory............:
(Lahm Peng)
Note : This test report is limited to the above client company and the product model only. It may not be duplicated without prior permitted by Shenzhen CCUT Quality Technology Co., Ltd.. All test data presented in this test report is only applicable to presented test sample.
FCC Test Report
Page 2 of 7
CCUT Testing & Certification
Report No: SSP24060144-2E
CONTENTS
1. General Information....................................................................................................................................................5 1.1 Product Information .............................................................................................................................................5 1.2 Test Facilities........................................................................................................................................................5
2. RF Exposure.................................................................................................................................................................6
2.1 Standard and Limit................................................................................................................................................6 2.2 Test Procedure......................................................................................................................................................6 2.3 Test Data and Results ............................................................................................................................................7
FCC Test Report
Page 3 of 7
CCUT Testing & Certification
Report No: SSP24060144-2E
Revision V1.0
Issue Date 2024-07-01
Revision History
Description Initial Release
Revised By Lahm Peng
FCC Test Report
Page 4 of 7
CCUT Testing & Certification
Report No: SSP24060144-2E
1. General Information
1.1 Product Information
Product Name:
WIRELESS EARPHONE
Trade Name:
-
Main Model:
J6
Series Models:
-
Rated Voltage:
DC 3.7V by battery, USB 5V charging
Battery:
Earphone: 3.7V 25mAh, charging case: 3.7V 300mAh
Hardware Version:
V1.0
Software Version:
V038
Note 1: The test data is gathered from a production sample, provided by the manufacturer.
Wireless Specification Wireless Standard: Operating Frequency: RF Output Power: Number of Channel: Channel Separation: Modulation: Antenna Gain: Type of Antenna: Type of Device:
Bluetooth BR/EDR 2402MHz ~ 2480MHz 2.09dBm 79 1MHz GFSK, Pi/4 DQPSK 2.7dBi SMD Antenna
Portable Device
Mobile Device
Modular Device
1.2 Test Facilities
Shenzhen CCUT Quality Technology Co., Ltd.
Laboratory Name:
1F, Building 35, Changxing Technology Industrial Park, Yutang Street,
Guangming District, Shenzhen, Guangdong, China
CNAS Laboratory No.:
L18863
A2LA Certificate No.:
6893.01
FCC Registration No:
583813
ISED Registration No.:
CN0164
All measurement facilities used to collect the measurement data are located at 1F, Building 35, Changxing
Technology Industrial Park, Yutang Street, Guangming District, Shenzhen, Guangdong, China.
FCC Test Report
Page 5 of 7
CCUT Testing & Certification
Report No: SSP24060144-2E
2. RF Exposure
2.1 Standard and Limit
3.0 for 1g SAR.
2.2 Test Procedure
Unless specifically required by the published RF exposure KDB procedures, standalone 1-g head or body and 10-g extremity SAR evaluation for general population exposure conditions, by measurement or numerical simulation, is not required when the corresponding SAR Test Exclusion Threshold condition(s), listed below, is (are) satisfied. These test exclusion conditions are based on source-based time-averaged maximum conducted output power of the RF channel requiring evaluation, adjusted for tune-up tolerance, and the minimum test separation distance required for the exposure conditions. The minimum test separation distance defined in 4.1 f) is determined by the smallest distance from the antenna and radiating structures or outer surface of the device, according to the host form factor, exposure conditions and platform requirements, to any part of the body or extremity of a user or bystander. To qualify for SAR test exclusion, the test separation distances applied must be fully explained and justified, typically in the SAR measurement or SAR analysis report, by the operating configurations and exposure conditions of the transmitter and applicable host platform requirements, according to the required published RF exposure KDB procedures. When no other RF exposure testing or reporting are required, a statement of justification and compliance must be included in the equipment approval, in lieu of the SAR report, to qualify for SAR test exclusion. When required, the device specific conditions described in the other published RF exposure KDB procedures must be satisfied before applying these SAR test exclusion provisions. a) For 100 MHz to 6 GHz and test separation distances 50 mm, the 1-g and 10-g SAR test exclusion thresholds are determined by the following: [(max. power of channel, including tune-up tolerance, mW) / (min. test separation distance, mm)] · [f(GHz)] 3.0 for 1-g SAR, and 7.5 for 10-g extremity SAR, where
· f(GHz) is the RF channel transmit frequency in GHz · Power and distance are rounded to the nearest mW and mm before calculation · The result is rounded to one decimal place for comparison · The values 3.0 and 7.5 are referred to as numeric thresholds in step b) below The test exclusions are applicable only when the minimum test separation distance is 50 mm, and for transmission frequencies between 100 MHz and 6 GHz. When the minimum test separation distance is < 5 mm, a distance of 5 mm according to 4.1 f) is applied to determine SAR test exclusion. b) For 100 MHz to 6 GHz and test separation distances > 50 mm, the 1-g and 10-g SAR test exclusion thresholds are determined by the following (also illustrated in Appendix B): 1) {[Power allowed at numeric threshold for 50 mm in step a)] + [(test separation distance 50 mm)·(f(MHz)/150)]} mW, for 100 MHz to 1500 MHz 2) {[Power allowed at numeric threshold for 50 mm in step a)] + [(test separation distance 50 mm)·10]} mW, for > 1500 MHz and 6 GHz c) For frequencies below 100 MHz, the following may be considered for SAR test exclusion (also
FCC Test Report
Page 6 of 7
CCUT Testing & Certification
Report No: SSP24060144-2E
illustrated in Appendix C): 1) For test separation distances > 50 mm and < 200 mm, the power threshold at the corresponding test
separation distance at 100 MHz in step b) is multiplied by [1 + log(100/f(MHz))] 2) For test separation distances 50 mm, the power threshold determined by the equation in c) 1) for
50 mm and 100 MHz is multiplied by ½ 3) SAR measurement procedures are not established below 100 MHz.
When SAR test exclusion cannot be applied, a KDB inquiry is required to determine SAR evaluation requirements for any SAR test results below 100 MHz to be acceptable.
2.3 Test Data and Results
The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.
For BR+EDR
Max Conducted Power(dBm)
2.09
Tune-up Power(dBm)
2(±1)
Max Tune-up Power(dBm)
3
Max Power(mW)
2
Frequency(MHz) 2480
Min. distance(mm)
5
Calc. thresholds
0.629920
limit 3.0
So a SAR test is not required
FCC Test Report
Page 7 of 7
Related FCC IDs:
- 2BD43-J6 - Shenzhen Xinyin Technology Co., Ltd WIRELESS EARPHONE [-J6] Microsoft Word 2021