Users Manual

Extreme Networks, Inc. AP460SC Wireless Access Point QXO-AP460SC QXOAP460SC ap460sc

User Guide for Extreme Networks models including: AP460C Hardware Wireless Access Point, Hardware Wireless Access Point, Access Point, AP460S6C, AP460S12C

PDF Viewing Options

Not Your Device? Search For Manuals or Datasheets below:


File Info : application/pdf, 25 Pages, 1.98MB

Document DEVICE REPORTGetApplicationAttachment.html?id=4847260
AP460C, AP460S6C, AP460S12C Hardware Guide

1

AP460C, AP460S6C, and AP460S12C Hardware User Guide
Install and view specifications and compliance information for AP460C, AP460S6C, and AP460S12C devices.

AP460C, AP460S6C, and AP460S12C Tri Radio 802.11ax access points are based on advanced radio technology and IP67 rated for harsh and extreme outdoor environments, with an extended temperature range from -40 C - +60 C. The tri-radio design delivers 802.11ax 2x2:2 and 4x4:4 data rates concurrently on the 2.4 and 5 GHz radios, with a third radio as a dedicated dual-band sensor.
For regulatory and compliance information, see "Regulatory Compliance Statements".
Important! Change the Country Code
If your access point is configured for the World Regulatory Domain, it is important to set the country code to the country in which the AP will be deployed to meet regulatory requirements and for optimal wireless operation. To do this, follow these steps:
The country code selection is for World models only and is not available to FCC, CAN, and other country-specific models. Per FCC regulations, all Wi-Fi products marketed in the United States must be set to U.S. channels only.
1. Power on the AP and allow it to find and connect to ExtremeCloud IQ. Once the AP is connected it appears in the table of devices in the Manage > Devices window.
2. Select the check box next to the AP, and then select Assign Country Code from the Actions drop-down list. In the dialog box, select the appropriate country from the drop-down list, and then select Save.
3. Upload your changes to the device.
Safety Guidelines
Safety Guidelines
The information in this section applies to AP460C , AP460S6C, and AP460S12C devices. The following safety icons are used in these guidelines to identify the type of precaution:

AP460C, AP460S6C, AP460S12C Hardware Guide

1

AP460C, AP460S6C, AP460S12C Hardware Guide

2

This icon indicates a general caution. Failure to comply with a caution notification can result in damage to equipment.
This icon indicates an electrical caution. Failure to comply with an electrical notification can result in serious injury or death, and extensive damage to equipment.
This icon indicates a laser caution. Failure to comply with a laser caution can result in serious injury.
The following table lists the safety precautions you should follow when installing your AP460C , AP460S6C, and AP460S12C devices. Extreme Networks devices must be installed by a professional installer who is certified to install these types of devices and to ensure that they are properly grounded and meet applicable local and national electrical codes.
These devices are intended for indoor use only.
Warning: This is a Class A product. In a domestic environment this product may cause radio interference in which case the user may be required to take adequate measures.
Do not install the device in an environment where the operating ambient temperature might exceed the recommended ranges.
For products available in the USA/Canada market, for the 2.4 GHz band, only channels 1-11 can be operated. Selection of other channels is not possible.
Changes or modifications made to this device that are not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
Use only attachments and accessories specified by Extreme Networks.
These devices are not intended for use by persons (including children) with reduced physical, sensory, or mental capabilities, or with lack of experience of knowledge unless they are given supervision or instruction concerning use of the devices by a person who is responsible for their safety. Children should be supervised to ensure that they do not play with the devices. Electrostatic discharge (ESD) can damage equipment and impair electrical circuitry. ESD damage occurs when electronic components are improperly handled and can result in complete or intermittent failures. Be sure to follow ESD-prevention procedures when handling electronic components and equipment.
During operation, the surfaces of these devices can become hot. Use caution when handling.
To meet federal radiation exposure requirements, these devices should be installed at a minimum distance of 12" (30 cm) from people or animals.
Install the AP
The following sections describe how to mount your AP in an outdoor location on a pole or flat surface.
Shipping Carton Contents
The AP460C, AP460S6C, and AP460S12C shipping carton contains the following items: l AP460C , AP460S6C, and AP460S12C chassis with two installed M20 cable gland assemblies and plugs, and two installed M25 seal
caps. l Hardware bag containing grounding hardware (M4 screw, split washer, and lock washer) l Read Me card.
Install the AP

AP460C, AP460S6C, AP460S12C Hardware Guide

2

AP460C, AP460S6C, AP460S12C Hardware Guide

3

Mount the AP460C, AP460S6C, or AP460S12C horizontally or vertically on a pole using the built-in brackets on the hardware, or on a solid flat surface using an accessory bracket (see "Accessories "). These devices can be installed in even the most extreme outdoor environments. The following sections describe the installation process. Before you install the device, make sure that you have all the materials and tools necessary, and familiarize yourself with the safety and site hazard warnings.
For best performance, deploy devices in relatively open areas at least 100' (30.5 m) apart from each other.
Required Tools
To install your device horizontally or vertically on a pole, you will need the following items: l Two hose clamps that accommodate the diameter of the pole to which you are mounting the device. l A slotted screwdriver to tighten the hose clamps.
Installation Methods
Install the Device on a Vertical or Horizontal Pole
Use the following steps to install the device on a vertical or horizontal pole. 1. Thread two hose straps of the correct diameter for the pole through the slots in on the back of the device and around the pole. Hose straps
should be 1/2" (12 or 13 mm) wide and made of stainless steel.

2. While holding the device against the pole, use a slotted screwdriver to tighten first the top and then the bottom hose strap screws to a minimum torque of at least 14 inch-pounds until the device is secure. Make sure that the LAN glands are facing down (earth) to eliminate the chance of water entering the chassis. If you are installing the device to sit on top of a horizontal pole, make sure the top of the device faces up (sky) with the LAN glands are protected by the top.

AP460C, AP460S6C, AP460S12C Hardware Guide

3

AP460C, AP460S6C, AP460S12C Hardware Guide

4

Install the Device on a Flat Surface
You can Install the device on a vertical or horizontal solid flat surface using the accessory wall bracket (AH-ACC-BKT-ASM). This kit contains the mounting bracket and four bolts without washers in the plastic bag labeled "Wall Mount". You will need to provide four mounting bolts or screws and wall mount anchors that are appropriate for the wall type where you are installing the device. 1. Insert the four M5 bolts that come in the bracket accessory kit into the holes on the bottom of the AP and torque each bolt to 16 inch-lbs.

AP460C, AP460S6C, AP460S12C Hardware Guide

4

AP460C, AP460S6C, AP460S12C Hardware Guide

5

1. Use the bracket as a template to mark the location of the mounting holes in the wall. Use the holes indicted by the blue arrows in the illustration below.

2. Drill a hole in the wall at each mark using a drill bit that is slightly smaller than the diameter of the screws so the screw threads will grip the wall securely. If you are not installing the device on a concrete wall, you can use threaded screws and screw-in wall anchors (not supplied) to mount the device.
3. Attach the bracket to the wall using the appropriate mounting screws for the wall type. 4. Insert the heads of the bolts on the device into the large end of the bracket keyholes and slide the device down until the bolts rest in the
narrow end of the keyholes. 5. Tighten the locking screws on the bracket to secure the device.
3. Ground the device as shown below. For horizontal mounts, be sure that the ports are facing earth to reduce the chance of water entering the chassis. As an added security measure, you can thread a safety strap through one of the cable strap slots in addition to the hose strap. Connect the other end of the strap to a secure object. Ground the Device Use the following steps to properly ground the AP: 1. Crimp the ground terminal onto a 10 AWG ground wire. 2. Insert the terminal on to the M4 screw, followed by the star washer. 3. insert the screw into the AP and torque it to 12 inch-lbs. 4. Connect the other end of the ground wire to an appropriate earthing location.

AP460C, AP460S6C, AP460S12C Hardware Guide

5

AP460C, AP460S6C, AP460S12C Hardware Guide

6

Install the Waterproof Ethernet Cable Housing
Use the waterproof Ethernet cable housing to ensure a weatherproof seal for the Ethernet cable. Use the following procedures to install the housing. 1. Remove the sealing nut, claw, and the 2-part seal from the main body of the waterproof housing. Assemble these pieces around the Eth-
ernet cable in the order shown here:

2. Insert the Ethernet cable through the sealing nut and claw. 3. Take the seal apart, insert the cable between the two halves and reassemble the seal. 4. Insert the seal into the claw. 5. Insert the Ethernet connector into the main body and into the connector in the AP until the locking tab clicks into place. Make sure that
the small tabs on the claw fit into their counterparts on the main body. 6. Insert the seal and claw into the main body. 7. Screw the threaded nut onto the threaded main bodyto a torque of 10 inch-pounds. 8. Connect the other end of the Ethernet cable to a PoE injector or PoE-enabled switch.
Accessories
The following accessories are available for the AP460C, AP460S6C, and AP460S12C: l AH-ACC-PW-CBL-US: 6' 18 AWG universal power cord with US plug l AH-ACC-PW-CBL-UK: 6' universal power cord with UK plug

AP460C, AP460S6C, AP460S12C Hardware Guide

6

AP460C, AP460S6C, AP460S12C Hardware Guide

7

l AH-ACC-PW-CBL-EU: 6' universal power cord with EU plug l AH-ACC-PW-CBL-AU: 6' universal power cord with AU plug l AH-ACC-PW-CBL-JP: 6' universal power cord with Japan plug l AH-ACC-PW-CBL- KR: 6' universal power cord with Korea plug l AH-ACC-BKT-ASM: Outdoor AP stainless steel wall bracket assembly. l AH-ACC-MRN-KIT: Stainless steel accessory kit including screw pack, mounting bracket, locking screw for mounting bracket, and metal hose
strap for 1-2.75" diameter poles. l AH-ACC-STRP-MRN: Outdoor AP stainless steel hose strap for 3-15" diameter pole (larger poles).
Remove the RJ45 Cable Safely
If you need to uninstall the device for any reason, such as troubleshooting, you will need to remove the RJ45 cable. Use the following steps:
1. For ETH0 or ETH1, loosen the gland sealing nut. 2. Move the gland cap, claw and seal down the cable at least 6 inches from the LAN connector. 3. Use a thin, strong non-conductive tool, such as a flat wooden stick to reach into the main gland body and depress the plastic locking latch
on the RJ45 connector.
Be careful not to touch any components of the PCBA board near the gland area.
5. While pressing down on the latch, gently pull on and remove the cable. 6. Remove the sealing nut, claw, and seal from the cable.
Hardware Components
You can see the hardware components in the illustration below and read about them in the sections that follow.

Component Descriptions
Status Light
The status light, located between the two Ethernet ports, conveys operational states for system power, firmware updates, Ethernet and wireless interface activity, and major alarms. At setup, this light cycles through the following sequence: l Solid White: The power is on and the device is operational. l Solid Amber: The device is on and is booting..

AP460C, AP460S6C, AP460S12C Hardware Guide

7

AP460C, AP460S6C, AP460S12C Hardware Guide

8

l Blinking Amber: The device is performing a firmware upgrade. l Dark: The power is off.
Ethernet Ports
These devices have two RJ45 Ethernet ports (Eth0 and Eth1) that automatically negotiate half- and full-duplex connections with the connecting device. The ports are autosensing and adjust to straight-through and crossover standard Cat2, Cat5, Cat5e, or Cat6 Ethernet cables automatically. The AP receives power through an Ethernet connection to the ETH0 port from PSE (power sourcing equipment) that is compatible with the 802.3at and 802.3at standards.
Micro USB Console Port
Remove the waterproof screw cap to access the micro USB port and the Reset button. Through the micro USB Console port you can make a serial connection between your management system and the AP. When you connect to the device using the micro USB Console port, the management station from which you connect to the device must have a VT100 emulation program, such as Tera Term Pro© (a free terminal emulator) or Hilgraeve HyperTerminal® (provided with Windows® operating systems from XP forward). The serial connection settings are: 9600 bits per second, 8 data bits, no parity, 1 stop bit, no flow control. You can order a micro USB console adapter cable here.
To troubleshoot these devices, you must first uninstall them from the outdoor location.
This illustration shows the USB, Micro USB and Reset buttons, which are located behind waterproof screw caps.

The pin-to-signal mapping for the Console port is shown below:

AP460C, AP460S6C, AP460S12C Hardware Guide

8

AP460C, AP460S6C, AP460S12C Hardware Guide

9

Pin

Definition

1

NC

2

RxD (input to AP)

3

TxD (output to terminal)

4

Signal (GND)

5

Signal (GND)

USB Port
These devices have a standard Micro USB port that you can use to connect USB-based beacons (iBeacon, for example) and IoT (Internet of Things) devices. To access the port, remove the gland cap screw.

Reset Button
The Reset button is located behind the same waterproof screw cap as the micro USB port. Use the Reset button to reset the device or restore the factory default settings. To prevent the reset button from resetting the configuration, enter this command: no reset-button reset-config-enable When this command is enabled, pressing the button for 5 seconds will still reboot the AP, but pressing it for more than 10 seconds will not reset its configuration.

Hardware Specifications
The following sections list radio, device, power, and environmental specifications for these devices.
Interfaces
l 100/1000/2500 Mbps auto-negotiation RJ45 Ethernet PoE port l 10/100/1000 Mbps auto-negotiation RJ45 Ethernet port
Radios
l BLE Bluetooth Low Energy l IEEE 802.11a/b/g/n/ac/ax 4x4 l IEEE 802.11a/b/g/n/ac/ax 2x2 l IEEE 802.11a/b/g/n/ac/ax 1x1 scanner
Radio Specifications
802.11a l 5.150-5.350, 5.470 - 5.850 GHz operating frequency l Orthogonal Frequency Division Multiplexing (OFDM) modulation l Rates (Mbps): 54, 48, 36, 24, 18, 12, 9, 6 with auto fallback 802.11b l 2.4-2.5 GHz operating frequency l Direct-Sequence Spread-Spectrum (DSSS) modulation l Rates (Mbps): 11, 5.5, 2,1 with auto fallback 802.11g l 2.4-2.5 GHz operating frequency l Orthogonal Frequency Division Multiplexing (OFDM) modulation l Rates (Mbps): 54, 48, 36, 24, 18, 12, 9, 6 with auto fallback 802.11n l 2.4-2.48 and 5.150-5.350, 5.470 - 5.850 GHz operating frequency l 802.11n modulation l Rates: MCS0 - MCS7 (6.5 MBps- 600Mbps)

AP460C, AP460S6C, AP460S12C Hardware Guide

9

AP460C, AP460S6C, AP460S12C Hardware Guide

l 1x1, 2x2,4x4 MIMO radio l HT20/HT40 support l A-MPDU and A-MSDU frame aggregation 802.11ac l 5.150-5.350, 5.470 - 5.850 GHz operating frequency l 802.11ac modulation (256-QAM) l Rates: VHT_MCS0 - MCS9, (6.5-3467 Mbps), NSS = 1-4 l 1x1, 2x2,4x4 MIMO radio l VHT20/VHT40/VHT80 support l TxBF (transmit beamforming) 802.11ax l 5.150-5.350, 5.470 - 5.850 GHz operating frequency l 802.11ax modulation (1024-QAM) l Dual-band OFDMA l Rates (Mbps): HE0-HE1 (8 Mbps - 1200 Mbps), NSS = 1-2 l 1x1, 2x2,4x4 MIMO radio l VHT20/VHT40/VHT80/VHT160 support l TxBF (transmit beamforming) 802.11ax (for 5 GHz sensor) l 2.4-2.48, 5.150-5.350, 5.470 - 5.850 GHz operating frequency l 802.11ax modulation (1024-QAM) l Dual-band OFDMA l Rates (Mbps): HE_MCS0-11 (8 Mbps - 1200 Mbps), NSS = 1-4 l 1x1, 2x2,4x4 MIMO radio l l VHT20/VHT40/VHT80/VHT160 support l TxBF (Transmit beamforming)
Transmit Power and Sensitivity Specifications
Output power may be limited by regulatory requirements.

2.4 G: Tolerance +2/-2 dB @25°C
Mode
11b 11g
HE20

Data Rate
1,2,5.5,11 54 Mbps 48 Mbps 36 Mbps 6 Mbps MCS 0,1,2 MCS 3 MCS 4, 5 MCS 6,7 MCS 8,9 MCS 10,11

AP460C, AP460S6C, AP460S12C Hardware Guide

10

Power
18 15 16 17 18 18 17 16 15 14 12

Unit
dBm dBm dBm dBm dBm dBm dBm dBm dBm dBm dBm

10

AP460C, AP460S6C, AP460S12C Hardware Guide
Mode
2.4 G Sensitivity 11b 11g HE20
5 G: Tolerance +2/-2 dB @25°C

Data Rate
1 Mbps 11 Mbps 6 Mpbs 36 Mpbs 48 Mbps 54 Mbps MCS 0 MCS 1 MCS 2 MCS 3 MCS 4 MCS 5 MCS 6 MCS 7 MCS 8 MCS 9 MCS 10 MCS 11

Power
-99 -90 -96 -84 -80 -78 -95 -91 -89 -86 -83 -79 -77 -76 -72 -70 -67 -64

11
Unit
dB dB dB dB dB dB dB dB dB dB dB dB dB dB dB dB dB dB

AP460C, AP460S6C, AP460S12C Hardware Guide

11

AP460C, AP460S6C, AP460S12C Hardware Guide
Mode
11a HE20
HE40
HE80
HE160
5 G Sensitivity 11a HE20

Data Rate
54 Mbps 48 Mbps 36 Mbps 6 Mbps MCS 0,1,2 MCS 3,4 MCS 5,6 MCS 7,8 MCS 9 MCS 10 MCS 11 MCS 0,1,2 MCS 3,4,5 MCS 6,7,8 MCS 9 MCS 10 MCS 11 MCS 0,1,2 MCS 3,4,5 MCS 6,7,8 MCS 9 MCS 10 MCS 11 MCS 0,1,2 MCS 3,4,5 MCS 6,7,8 MCS 9 MCS 10 MCS 11
6 Mbps 36 Mbps 48 Mbps 54 Mbps MCS 0 MCS 1 MCS 2 MCS 3

AP460C, AP460S6C, AP460S12C Hardware Guide

Power
18 18 19 20 20 19 18 17 16 15 14 19 18 17 16 15 14 19 18 17 16 15 14 19 18 17 16 15 14
-94 -83 -79 -77 -94 -91 -88 -86

12
Unit
dBm dBm dBm dBm dBm dBm dBm dBm dBm dBm dBm dBm dBm dBm dBm dBm dBm dBm dBm dBm dBm dBm dBm dBm dBm dBm dBm dBm dBm
db db db db db db db db

12

AP460C, AP460S6C, AP460S12C Hardware Guide
Mode
HE40
HE80
HE160

Data Rate
MCS 4 MCS 5 MCS 6 MCS 7 MCS 8 MCS 9 MCS 10 MCS 11 MCS 0 MCS 1 MCS 2 MCS 3 MCS 4 MCS 5 MCS 6 MCS 7 MCS 8 MCS 9 MCS 10 MCS 11 MCS 0 MCS 1 MCS 2 MCS 3 MCS 4 MCS 5 MCS 6 MCS 7 MCS 8 MCS 9 MCS 10 MCS 11 MCS 0 MCS 1 MCS 2 MCS 3 MCS 4 MCS 5

AP460C, AP460S6C, AP460S12C Hardware Guide

Power
-82 -78 -77 -75 -71 -69 -66 -63 -92 -88 -86 -83 -80 -76 -74 -73 -69 -67 -63 -60 -88 -85 -83 -80 -77 -73 -71 -69 -66 -64 -60 -57 -85 -82 -80 -77 -74 -70

13
Unit
db db db db db db db db db db db db db db db db db db db db db db db db db db db db db db db db db db db db db db

13

AP460C, AP460S6C, AP460S12C Hardware Guide

14

Mode

Data Rate
MCS 6 MCS 7 MCS 8 MCS 9 MCS 10 MCS 11

Power
-68 -66 -63 -61 -57 -54

Unit
db db db db db db

Device Specifications

l Chassis dimensions when mounted diagonally: 11.375" W 11.375" H 2.9" D (289 mm x 289 mm x 74 mm) l Weight: 4 pounds (1 .8 kilograms) l Four dual-band internal WiFi antennas and one BLE internal antenna l Micro USB Console serial port: (9600 bits per second, 8 data bits, parity: none, 1 stop bit, no flow control l Eth0 Ethernet port: autosensing 10/100/1000Base-T/TX Mbps, with 802.3at-compliant PoE l Eth1 Ethernet port: autosensing 10/100/1000Base-T/TX Mbps

Antennas

AP460C: l 3 integrated single-band 5.1-5.8 GHz omnidirectional antennas l 4 integrated dual band 2.4-2.5 GHz and 5.1-5.8 GHz omnidirectional antennas l 1 integrated single band 2.4-2.5 GHz omnidirectional antenna for BLE
AP460S6C: l 2 Integrated single band, 5.1-5.8 GHz sector antennas l 4 integrated dual band, 2.4-2.5 GHz and 5.1-5.8 GHz sector antennas l 1 integrated single band, 2.4-2.5 GHz omnidirectional antennas for BLE AP460S12C: l 2 Integrated single band, 5.1-5.8 GHz sector antennas l 4 Integrated dual band, 2.4-2.5 GHz and 5.1-5.8 GHz sector antennas l 1 Integrated single band, 2.4-2.5 GHz omnidirectional antennas for BLE

Antenna Gain

AP460C:

Software Mode

2x2 Rado WiFi0

4x4 Radio WiFi1

Scanner WiFi2

IoT Radio Azimuth Beamwidth

Dual band

2.4 GHz 3.24 dBi

5 GHz 4.21 dBi

2.4 GHz 3.74 dBi/ 5 GHz 3.42 dBi

3.2 dBi

360

Dual 5G

5 GHz 3.56 dBi

5 GHz 4.21 dBi

2.4 GHz 3.74 dBi/ 5 GHz 3.42 dBi

3,2 dBi

360

Elevation Beamwidth
150
150

AP460S6C:
Software Mode
Dual band
Dual 5G

WiFi0

WiFi1

2.4 Ghz 7.83dBi

5 Ghz 8.06dBi

5 GHz 3.56 dBi

5 GHz 4.21 dBi

WiFi2
2.4 Ghz 7.59dBi/ 5 Ghz 7.63dBi
2.4 GHz 3.74 dBi/ 5 GHz 3.42 dBi

IoT Radio
7.9 dBi

Azimuth Beamwidth
60

Elevation Beamwidth
60

7.9 dBi

60

60

AP460C, AP460S6C, AP460S12C Hardware Guide

14

AP460C, AP460S6C, AP460S12C Hardware Guide

15

AP460S12C:
Software Mode

WiFi0

Dual band

2.4 GHz 6.46 dBi

Dual 5G

5 GHz 6.34 dBi

WiFi1
5 GHz 6.25 dBi
5 GHz 6.25 dBi

WiFi2 IoT Radio Azimuth Beamwidth Elevation Beamwidth

2.4 GHz 5.53 dBi/ 5 GHz 5.54 dBi

6.63 dBi

120

70

2.4 GHz 5.53 dBi/ 5 GHz 5.54 dBi

6.63 dBi

120

70

Antenna Plots
The antenna plots for the AP460C are available below. The Ethernet port location is noted on each chart.
Antenna 1

Antenna 2

AP460C, AP460S6C, AP460S12C Hardware Guide

15

AP460C, AP460S6C, AP460S12C Hardware Guide

16

Antenna 3

Antenna 4

Antenna 5

AP460C, AP460S6C, AP460S12C Hardware Guide

16

AP460C, AP460S6C, AP460S12C Hardware Guide

17

Antenna 6

Antenna 7

AP460C, AP460S6C, AP460S12C Hardware Guide

17

AP460C, AP460S6C, AP460S12C Hardware Guide

18

Power Specifications
 IEEE 802.3af PoE (Power over Ethernet)
Power Options

 Power draw w/o USB: typical 19.2 W, maximum 20.8 W  802.3at PoE capable Gigabit Ethernet port (RJ45 power input pins: wires 4, 5, 7, 8 or 1, 2, 3, 6)  802.3af and 802.3at PoE injector
PoE input: Typical: l 54V DC, 0.40A 21.7W Max. PoE with USB 2.5W (IEEE 802.3at only 42.5-57VDC, USB 0.5A) l 54V DC, 0.45A 19.2W Max. PoE without USB (IEEE 802.3af 37-42.5VDC) Maximum: l 54V DC, 0.43A 23.3W Max. PoE with USB 2.5W (IEEE 802.3at only 42.5-57VDC, USB 0.5A) l 42.5V DC, 0.49A 20.8W Max. PoE without USB (IEEE 802.3af 37-42.5VDC)
l ESD Protection: 8 kV contact discharge / 15 kV air discharge
Power Profile

AP460C
2.4 G Radio 5 G Radio

802.3af
2x2 (14 dBm) 2x2 (17 dBm)

Sensor Radio

2.4 G and 5 G (15 dBm)

BLE USB 2.5 G Ethernet 1 G Ethernet
Environmental Specifications

Enabled No Yes No

AP460C, AP460S6C, AP460S12C Hardware Guide

802.3at
2x2 (18 dbm) 4x4 (18 dBm) 2.4 G and 5 G
(18 dBm) Enabled
Yes Yes Yes
18

AP460C, AP460S6C, AP460S12C Hardware Guide

19

l Operating temperature: -40° to 140° F (-40° to 60° C) l Storage temperature: -40° to 158° F (-40° to 70° C) l Relative Humidity: 0 to 95% RH (noncondensing) l Environmental discharge: +/- 8KV contact and +/- 15 KV air l Housing: IP67 rated outdoor use
Regulatory Compliance Statements
The regulatory compliance statements in this section apply to Extreme Networks AP460C devices.
Japan Indoor Use
For Japan, the AP460C is restricted for indoor use in the 5150-5350 MHz band only.
Japan Equipment VCCI-B Statement

Compliance Statement - Europe
EU Declaration of Conformity View full CE Declaration of Compliance and this information online at www.aerohive.com/support/regulatory-compliance Extreme Networks, Inc. declares that this device complies with the essential requirements of the Radio Eqiupment Directive 2014/53/EU. l Bulgarian []: [Extreme Networks]   [Extreme Networks] ,     [AP460C]  
   2014/53/U. l Croatian [hrvatski]: [Extreme Networks] ovime izjavljuje da je radijska oprema tipa [AP460C] u skladu s Direktivom 2014/53/EU. l Czech [Cesky]: [Extreme Networks] Tímto [jméno výrobce] prohlasuje, ze typ rádiového zaízení [AP460C] je v souladu se smrnicí
2014/53/EU. l Danish [Dansk]: Hermed erklærer [Extreme Networks], at radioudstyrstypen [AP460C] er i overensstemmelse med direktiv 2014/53/EU. l Dutch [Nederland]Hierbij verklaar ik, [Extreme Networks], dat het type radioapparatuur [AP460C] conform is met Richtlijn 2014/53/EU. l English: Hereby, [Extreme Networks], declares that this [ [[[Undefined variable Primary.AP640]]]] is in compliance with the essential require-
ments and other relevant provisions of Directive 2014/53/EU. l Estonian [Eesti]: Käesolevaga deklareerib [Extreme Networks], et käesolev raadioseadme tüüp [AP460C] vastab direktiivi 2014/53/EL
nõuetele. l Finnish [Suomi]: [Extreme Networks] vakuuttaa, että radiolaitetyyppi [AP460C] on direktiivin 2014/53/EU mukainen.. l French [Français]: Le soussigné, [Extreme Networks], déclare que l'équipement radioélectrique du type [AP460C] est conforme à la directive
2014/53/UE. l German [Deutsch]: Hiermit erklärt [Extreme Networks], dass der Funkanlagentyp [AP460C] der Richtlinie 2014/53/EU entspricht. l Greek []:    [Extreme Networks]   [ AP460C]       
     2014/53/EU. l Hungarian [Magyar]: [Extreme Networks] igazolja, hogy a [AP460C] típusú rádióberendezés megfelel a 2014/53/EU irányelvnek. l Italian [Italiano]: Il fabbricante, [Extreme Networks], dichiara che il tipo di apparecchiatura radio [AP460C] è conforme alla direttiva
2014/53/UE. l Latvian [Latviski]: Ar so [Extreme Networkss] deklar, ka radioiekrta [AP460C] atbilst Direktvai 2014/53/ES. l Lithuanian [Lietuvi]: As, [Extreme Networks], patvirtinu, kad radijo rengini tipas [AP460Cs] atitinka Direktyv 2014/53/ES. l Maltese [Malti]: B'dan, [Extreme Networks], niddikjara li dan it-tip ta' tagmir tar-radju [AP460C] huwa konformi mad-Direttiva 2014/53/UE. l Polish [Polski]: [Extreme Networks] niniejszym owiadcza, e typ urzdzenia radiowego [AP460C] jest zgodny z dyrektyw 2014/53/UE.

AP460C, AP460S6C, AP460S12C Hardware Guide

19

AP460C, AP460S6C, AP460S12C Hardware Guide

20

l Portuguese [Português]: O(a) abaixo assinado(a) [Extreme Networks] declara que o presente tipo de equipamento de rádio [AP460C] está em conformidade com a Diretiva 2014/53/UE.
l Romanian [Romania]: Prin prezenta, [Extreme Networks] declar c tipul de echipamente radio [AP460C] este în conformitate cu Directiva 2014/53/UE.
l Slovak [Slovensky]: [Extreme Networks] týmto vyhlasuje, ze rádiové zariadenie typu [AP460C] je v súlade so smernicou 2014/53/EÚ. l Slovenian [Slovenija]: [Extreme Networks] potrjuje, da je tip radijske opreme [AP460C] skladen z Direktivo 2014/53/EU. l Spanish [Español]: Por la presente, [Extreme Networks] declara que el tipo de equipo radioeléctrico [AP460C] es conforme con la Directiva
2014/53/UE. l Swedish [Sverige]: Härmed försäkrar [Extreme Networks] att denna typ av radioutrustning [AP460C] överensstämmer med direktiv
2014/53/EU.
Radio Specifications
Bluetooth BLE Beacon l 2402 - 2480 MHz l Frequency Hopping Spread-Spectrum (FHSS)
USA, Canada, and Taiwan Radio Frequency Bands
a. USA l 802.11b/g/n/ac: 2.4 GHz band: 2400-2483 MHz l 802.11a/n/ac/ax: 5 GHz band: 5150-5350, 5470-5850 MHz l BLE: 2402-2480 MHz
b. Canada l 802.11b/g/n/ac: 2.4 GHz band: 2400-2483 MHz l Indoor: 802.11a/n/ac/ax: 5 GHz band: 5150-5350, 5470-5600, 5650-5850 MHz l l Outdoor: 802.11a/n/ac/ax: 5 GHz band: 5250-5350, 5470-5600, 5650-5850 MHz l BLE: 2402-2480 MHz
c. Taiwan l l 802.11b/g/n/ac: 2.4 GHz band: 2412-2462 MHz l l 802.11a/n/ac/ax: 5 GHz band: 5180-5320, 5500-5825 MHz l l BLE: 2412-2462 MHz
EU Radio Frequency and Power Levels
This product supports the following radio frequencies and power levels in the EU version: l 802.11b/g/n/ac, 2.4 GHz band: 2400-2483 MHz EIRP<20 dBm l 802.11a/ac/n/ax: 5 GHz band: 5150-5350 MHz EIRP<23 dBm (indoor only), 5470-5850 MHz EIRP<30 dBm, 5725-5850 MHz<14 dBm l BLE: 2402-2480 MHz EIRP<8 dBm Bulgarian []:             : l 802.11b/g/n/ac, 2.4 GHz band: 2400-2483 MHz EIRP<20 dBm l 802.11a/ac/n/ax: 5 GHz band: 5150-5350 MHz EIRP<23 dBm (indoor only), 5470-5850 MHz EIRP<30 dBm, 5725-5850 MHz<14 dBm l BLE: 2402-2480 MHz EIRP<8 dBm Croatian [hrvatski]: Ovaj proizvod podrzava sljedee radijske frekvencije i razinu snage u verziji EU: l 802.11b/g/n/ac, 2.4 GHz band: 2400-2483 MHz EIRP<20 dBm l 802.11a/ac/n/ax: 5 GHz band: 5150-5350 MHz EIRP<23 dBm, 5470-5850 MHz EIRP<30 dBm, 5725-5850 MHz<14 dBm l BLE: 2402-2480 MHz EIRP<8 dBm Cesky [Czech]: [Tento produkt podporuje následující rádiové frekvence a úrovn výkonu ve verzi EU: l 802.11b/g/n/ac, 2.4 GHz band: 2400-2483 MHz EIRP<20 dBm l 802.11a/ac/n/ax: 5 GHz band: 5150-5350 MHz EIRP<23 dBm, 5470-5850 MHz EIRP<30 dBm, 5725-5850 MHz<14 dBm l BLE: 2402-2480 MHz EIRP<8 dBm Danish [Dansk]: Dette produkt understøtter følgende radiofrekvenser og strømniveauer i EU-versionen:

AP460C, AP460S6C, AP460S12C Hardware Guide

20

AP460C, AP460S6C, AP460S12C Hardware Guide

21

l 802.11b/g/n/ac, 2.4 GHz band: 2400-2483 MHz EIRP<20 dBm l 802.11a/ac/n/ax: 5 GHz band: 5150-5350 MHz EIRP<23 dBm, 5470-5850 MHz EIRP<30 dBm, 5725-5850 MHz<14 dBm l BLE: 2402-2480 MHz EIRP<8 dBm Dutch [Nederland]: Dit product ondersteunt de volgende radiofrequenties en vermogensniveaus in de EU-versie: l 802.11b/g/n/ac, 2.4 GHz band: 2400-2483 MHz EIRP<20 dBm l 802.11a/ac/n/ax: 5 GHz band: 5150-5350 MHz EIRP<23 dBm, 5470-5850 MHz EIRP<30 dBm, 5725-5850 MHz<14 dBm l BLE: 2402-2480 MHz EIRP<8 dBm English: This product supports the following radio frequencies and power levels in the EU version: l 802.11b/g/n/ac, 2.4 GHz band: 2400-2483 MHz EIRP<20 dBm l 802.11a/ac/n/ax: 5 GHz band: 5150-5350 MHz EIRP<23 dBm (indoor only), 5470-5850 MHz EIRP<30 dBm, 5725-5850 MHz<14 dBm l BLE: 2402-2480 MHz EIRP<8 dBm Estonian [Eesti]: See toode toetab järgmisi raadiosagedusi ja võimsuse taseme ELis versioon: l 802.11b/g/n/ac, 2.4 GHz band: 2400-2483 MHz EIRP<20 dBm l 802.11a/ac/n/ax: 5 GHz band: 5150-5350 MHz EIRP<23 dBm (indoor only), 5470-5850 MHz EIRP<30 dBm, 5725-5850 MHz<14 dBm l BLE: 2402-2480 MHz EIRP<8 dBm Finnish [Suomi]: Tämä tuote tukee seuraavia radiotaajuuksia ja tehoja EU-versiossa: l 802.11a/b/g/n, 2.4 GHz band: 2412-2472 MHz EIRP<20 dBm l 802.11 a/ac/n/ax: 5 GHz band: 5150-5350 MHz EIRP<23 dBm, 5500-5720 MHz EIRP<30 dBm l BLE: 2402-2480 MHz EIRP<8 dBm French [Français]: Ce produit prend en charge les fréquences radio et les niveaux de puissance suivants dans la version EU: l 802.11b/g/n/ac, 2.4 GHz band: 2400-2483 MHz EIRP<20 dBm l 802.11a/ac/n/ax: 5 GHz band: 5150-5350 MHz EIRP<23 dBm, 5470-5850 MHz EIRP<30 dBm, 5725-5850 MHz<14 dBm l BLE: 2402-2480 MHz EIRP<8 dBm German [Deutsch]: Dieses Produkt unterstützt die folgenden Funkfrequenzen und Leistungsstufen in der EU-Version: l 802.11b/g/n/ac, 2.4 GHz band: 2400-2483 MHz EIRP<20 dBm l 802.11a/ac/n/ax: 5 GHz band: 5150-5350 MHz EIRP<23 dBm, 5470-5850 MHz EIRP<30 dBm, 5725-5850 MHz<14 dBm l BLE: 2402-2480 MHz EIRP<8 dBm Greek []              : l 802.11b/g/n/ac, 2.4 GHz band: 2400-2483 MHz EIRP<20 dBm l 802.11a/ac/n/ax: 5 GHz band: 5150-5350 MHz EIRP<23 dBm, 5470-5850 MHz EIRP<30 dBm, 5725-5850 MHz<14 dBm l BLE: 2402-2480 MHz EIRP<8 dBm Hungarian [Magyar]: Ez a termék a következ rádiófrekvenciákat és teljesítményszinteket támogatja az EU verziójában : l 802.11b/g/n/ac, 2.4 GHz band: 2412-2472 MHz EIRP<20 dBm l 802.11 a/ac/n/ax: 5 GHz band: 5150-5350 MHz EIRP<23 dBm, 5500-5720 MHz EIRP<30 dBm l BLE: 2402-2480 MHz EIRP<8 dBm Italian [Italiano]: Questo prodotto supporta le seguenti frequenze radio e livelli di potenza nella versione UE: l 802.11b/g/n/ac, 2.4 GHz band: 2400-2483 MHz EIRP<20 dBm l 802.11a/ac/n/ax: 5 GHz band: 5150-5350 MHz EIRP<23 dBm, 5470-5850 MHz EIRP<30 dBm, 5725-5850 MHz<14 dBm l BLE: 2402-2480 MHz EIRP<8 dBm Latvian [Latviski]: Sis produkts atbalsta sdus radio frekvences un jaudas lmeni ES versiju: l 802.11b/g/n/ac, 2.4 GHz band: 2400-2483 MHz EIRP<20 dBm l 802.11a/ac/n/ax: 5 GHz band: 5150-5350 MHz EIRP<23 dBm, 5470-5850 MHz EIRP<30 dBm, 5725-5850 MHz<14 dBm l BLE: 2402-2480 MHz EIRP<8 dBm Lithuanian [Lietuvi]: Sis produktas palaiko siuos radijo daznius ir galios lyg ES versija: l 802.11b/g/n/ac, 2.4 GHz band: 2412-2472 MHz EIRP<20 dBm l 802.11 a/ac/n/ax: 5 GHz band: 5150-5350 MHz EIRP<23 dBm, 5500-5720 MHz EIRP<30 dBm

AP460C, AP460S6C, AP460S12C Hardware Guide

21

AP460C, AP460S6C, AP460S12C Hardware Guide

22

l BLE: 2402-2480 MHz EIRP<8 dBm Maltese [Malti]: Dan il-prodott jappoja l-frekwenzi tar-radju li ejjin u l-livelli ta 'enerija fil-verjoni UE: l 802.11b/g/n/ac, 2.4 GHz band: 2400-2483 MHz EIRP<20 dBm l 802.11a/ac/n/ax: 5 GHz band: 5150-5350 MHz EIRP<23 dBm, 5470-5850 MHz EIRP<30 dBm, 5725-5850 MHz<14 dBm l BLE: 2402-2480 MHz EIRP<8 dBm Pollish [Polski]: Ten produkt obsluguje nastpujce czstotliwoci radiowe i poziomy mocy w wersji unijnej: l 802.11b/g/n/ac, 2.4 GHz band: 2400-2483 MHz EIRP<20 dBm l 802.11a/ac/n/ax: 5 GHz band: 5150-5350 MHz EIRP<23 dBm, 5470-5850 MHz EIRP<30 dBm, 5725-5850 MHz<14 dBm l BLE: 2402-2480 MHz EIRP<8 dBm Portuguese [Português]: Este produto suporta as seguintes frequências de rádio e níveis de potência na versão UE: l 802.11b/g/n/ac, 2.4 GHz band: 2400-2483 MHz EIRP<20 dBm l 802.11a/ac/n/ax : 5 GHz band: 5150-5350 MHz EIRP<23 dBm, 5470-5850 MHz EIRP<30 dBm, 5725-5850 MHz<14 dBm l BLE: 2402-2480 MHz EIRP<8 dBm Romanian [Romania]: This product supports the following radio frequencies and power levels in the EU version l 802.11b/g/n/ac, 2.4 GHz band: 2400-2483 MHz EIRP<20 dBm l 802.11a/ac/n/ax: 5 GHz band: 5150-5350 MHz EIRP<23 dBm, 5470-5850 MHz EIRP<30 dBm, 5725-5850 MHz<14 dBm l BLE: 2402-2480 MHz EIRP<8 dBm Slovak [Slovensky]:Tento produkt podporuje nasledujúce rádiové frekvencie a úrovne napájania vo verzii EÚ: l 802.11b/g/n/ac, 2.4 GHz band: 2400-2483 MHz EIRP<20 dBm l 802.11a/ac/n/ax: 5 GHz band: 5150-5350 MHz EIRP<23 dBm, 5470-5850 MHz EIRP<30 dBm, 5725-5850 MHz<14 dBm l BLE: 2402-2480 MHz EIRP<8 dBm Slovenian [Slovenija]: Ta izdelek podpira te radijske frekvence in ravni moci v razlicici EU: l 802.11b/g/n/ac, 2.4 GHz band: 2412-2472 MHz EIRP<20 dBm l 802.11 a/ac/n/ax: 5 GHz band: 5150-5350 MHz EIRP<23 dBm, 5500-5720 MHz EIRP<30 dBm l BLE: 2402-2480 MHz EIRP<8 dBm Spanish [Español]: Este producto admite las siguientes frecuencias de radio y niveles de potencia en la versión de la UE: l 802.11b/g/n/ac, 2.4 GHz band: 2400-2483 MHz EIRP<20 dBm l 802.11a/ac/n/ax: 5 GHz band: 5150-5350 MHz EIRP<23 dBm, 5470-5850 MHz EIRP<30 dBm, 5725-5850 MHz<14 dBm l BLE: 2402-2480 MHz EIRP<8 dBm Swedish [Sverige]: Denna produkt stöder följande radiofrekvenser och effektnivåer i EU-versionen: l 802.11b/g/n/ac, 2.4 GHz band: 2400-2483 MHz EIRP<20 dBm l 802.11a/ac/n/ax: 5 GHz band: 5150-5350 MHz EIRP<23 dBm, 5470-5850 MHz EIRP<30 dBm, 5725-5850 MHz<14 dBm l BLE: 2402-2480 MHz EIRP<8 dBm UK: This product supports the following radio frequencies and power levels in the EU version: l 802.11b/g/n/ac, 2.4 GHz band: 2400-2483.5 MHz EIRP<20 dBm l 802.11a/ac/n/ax: 5 GHz band: 5150-5350 MHz EIRP<23 dBm (indoor only), 5500-5730 MHz EIRP<30 dBm, 5730-5850 MHz<23dBm (indoor only) l BLE: 2402-2480 MHz EIRP<8 dBm
EU Radiation Warning Statement

To meet radiation exposure requirements, these devices should be installed at a minimum distance of 7.87" (20 cm) from people or animals.

AP460C, AP460S6C, AP460S12C Hardware Guide

22

AP460C, AP460S6C, AP460S12C Hardware Guide

23

Restrictions: 5150-5350 MHz for indoor use only. Bulgarian []:         ,           20     . : 5150-5350 MHz    . Croatian [hrvatski]: Da bi zadovoljili zahtjeve izlozenosti zracenju, ti ureaji trebaju biti instalirani na minimalnoj udaljenosti od 20 cm od ljudi ili zivotinja. Ogranicenja: 5150-5350 MHz samo za unutarnju uporabu. Czech [Cesky]: Aby byly splnny pozadavky na ozáení, mly by být tato zaízení instalována v minimální vzdálenosti 20 cm od lidí nebo zvíat. Omezení: 5150-5350 MHz pouze pro vnitní pouzití. Danish [Dansk]: For at opfylde kravene til strålingseksponering skal disse enheder installeres i mindst 7.87" (20 cm) afstand fra mennesker eller dyr. Restriktioner: 5150-5350 MHz kun til indendørs brug. Dutch [Nederland]: Om aan stralingsblootstelling te voldoen, dienen deze apparaten op een minimumafstand van 7.87" (20 cm) van mensen of dieren te worden geïnstalleerd. Beperkingen: 5150-5350 MHz alleen voor gebruik binnenshuis. English: To meet radiation exposure requirements, these devices should be installed at a minimum distance of 7.87" (20 cm) from people or animals. Restrictions: 5150-5350 MHz for indoor use only. Estonian [Eesti]: Et rahuldada kiirituse nõuetele, need seadmed tuleb paigaldada minimaalselt 7.87" (20 cm) inimestelt või loomadelt. Piirangud: 5150-5350 MHz sisetingimustele. Finnish [Suomi]: Säteilytysvaatimusten täyttämiseksi nämä laitteet on asennettava vähintään 7.87" (20 cm) etäisyydelle ihmisistä tai eläimistä. Rajoitukset: 5150-5350 MHz vain sisäkäyttöön. French [Français]: Pour répondre aux exigences d'exposition aux rayonnements, ces appareils devraient être installés à une distance minimale de 7.87" (20 cm) des personnes ou des animaux. Restrictions: 5150-5350 MHz pour usage intérieur seulement. German [Deutsch]: Um die Anforderungen an die Strahlenbelastung zu erfüllen, sollten diese Geräte in einem Abstand von 7.87" (20 cm) von Personen oder Tieren installiert werden. Einschränkungen: 5150-5350 MHz nur für den Innenbereich. Greek []:        ,          20 cm    . : 5150-5350 MHz    . Hungarian [Magyar]: A sugárterhelési követelmények teljesítése érdekében ezeket az eszközöket legalább 7.87" (20 cm) távolságra kell felszerelni az emberek vagy az állatoktól. Korlátozások: 5150-5350 MHz csak beltéri használatra. Italian [Italiano]: Per soddisfare i requisiti di esposizione alle radiazioni, questi dispositivi devono essere installati ad una distanza minima di 20 cm da persone o animali. Restrizioni: 5150-5350 MHz solo per uso interno. Latvian [Latviski]: Lai apmierintu starojuma iedarbbas prasbm, ss ierces ir uzstdtas pie minimlo attlumu 7.87" (20 cm) no cilvkiem vai dzvniekiem. Ierobezojumi: 5150-53250 MHz izmantot tikai telps. Lithuanian [Lietuvi]: Siekiant patenkinti SPINDULIAVIM reikalavimus, sie taisai turi bti rengiami ne arciau kaip 7.87" (20 cm) nuo zmoni ar gyvn. Apribojimai: 5150-5350 MHz naudoti tik patalpose. Maltese [Malti]: Biex jilqu l-tiiet ta 'espoizzjoni tar-radjazzjoni, dawn il-mezzi gandhom jiu installati f'distanza minima ta' 7.87" (20 m) minn nies jew annimali. Restrizzjonijiet: MHz 5150-5350 gall-uu fuq ewwa biss. Polish [Polski]: Aby spelni wymagania dotyczce naraenia na promieniowanie, urzdzenia te powinny by instalowane w odlegloci minimum 7.87" (20 cm) od ludzi lub zwierzt. Ograniczenia: 5150-5350 MHz tylko do uytku wewntrznego. Portuguese [Português]: Para atender aos requisitos de exposição à radiação, esses dispositivos devem ser instalados a uma distância mínima de 20 cm (7.87") de pessoas ou animais. Restrições: 5150-5350 MHz para uso interno apenas. Romanian [Romania]: Pentru a îndeplini cerinele de expunere la radiaii, aceste dispozitive ar trebui instalate la o distan minim de 20 cm de la oameni sau animale. Restricii: 5150-5350 MHz numai pentru uz intern. Slovak [Slovensky]: Ak chcete splni poziadavky na vystavenie ziareniu, mali by by tieto zariadenia instalované v minimálnej vzdialenosti od udí alebo zvierat od minimálnej vzdialenosti 20 cm. Obmedzenia: 5150-5350 MHz iba pre vnútorné pouzitie.

AP460C, AP460S6C, AP460S12C Hardware Guide

23

AP460C, AP460S6C, AP460S12C Hardware Guide

24

Slovenian [Slovenija]: Da bi zadovoljili zahteve izpostavljenosti sevanja, morajo biti te naprave namescene na razdalji najmanj 7.87" (20 cm) iz ljudi ali zivali. Omejitve: 5150-5350 MHz samo za uporabo v zaprtih prostorih. Spanish [Español]: Para cumplir con los requisitos de exposición a la radiación, estos dispositivos deben instalarse a una distancia mínima de 7.87" (20 cm) de personas o animales. Restricciones: 5150-5350 MHz sólo para uso en interiores. Swedish [Sverige]: För att uppfylla kraven på strålningsexponering bör dessa enheter installeras på minst 7.87" (20 cm) från människor eller djur. Restriktioner: 5150-5350 MHz endast för inomhusbruk.
Federal Communication Commission Interference Statement
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures:
l Reorient or relocate the antenna of the receiving devices.
l Increase the separation between this equipment and receiving equipment.
l Connect this equipment into an outlet on a circuit different from that to which the receiving equipment is connected.
l Consult the dealer or an experienced radio or TV technician for help.
FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. IMPORTANT NOTE: Radiation Exposure Statement: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance of 10" (25 cm) between the radiator and people or animals. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. Country Code selection feature to be disabled for products marketed to the US/CANADA.
Warning: This is a Class A product. In a domestic environment this product may cause radio interference in which case the user may be required to take adequate measures.
Brazil Statement
Este equipamento não tem direito à proteção contra inteferência prejudicial e não pode causar interferência em sistemas devidamente autorizados.
Mexico Statement
La operación de este equipo está sujeta a las siguientes dos condiciones (1) es posible que este equipo o dispositivo no cause interferencia perjudicial y (2) este equipo o dispositivo debe aceptar cualquier interferencia, incluyendo la que pueda causar su operación no deseada. The operation of this equipment is subject to the following two conditions: (1) it is possible that this equipment or device does not cause disruptive interference and (2) this equipment or device must accept any interference, including interference that may cause undesired operation).
Industry Canada Statement:
This device complies with Industry Canada license-exempt RSS standards. Operation is subject to the following two conditions:
l This device may not cause interference, and
l This device must accept any interference, including interference that may cause undesired operation of the device.
Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes :
l l'appareil ne doit pas produire de brouillage, et
l l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement.
Caution:

AP460C, AP460S6C, AP460S12C Hardware Guide

24

AP460C, AP460S6C, AP460S12C Hardware Guide

25

(i) the device for operation in the band 5150-5250 MHz is only for indoor use to reduce the potential for harmful interference to co-channel mobile satellite systems; Avertissement: (i) les dispositifs fonctionnant dans la bande 5150-5250 MHz sont réservés uniquement pour une utilisation à l'intérieur afin de réduire les risques de brouillage préjudiciable aux systèmes de satellites mobiles utilisant les mêmes canaux; Dynamic Frequency Selection (DFS): Dynamic Frequency Selection (DFS) for devices operating in the bands 5250- 5350 MHz, 5470-5600 MHz and 5650-5725 MHz. Sélection dynamique de fréquences (DFS): Sélection dynamique de fréquences (DFS) pour les dispositifs fonctionnant dans les bandes 5250-5350 MHz, 5470-5600 MHz et 5650-5725 MHz. Radiation Exposure Statement: This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 30 cm between the radiator and people or animals. Déclaration d'exposition aux radiations: Cet équipement est conforme aux limites d'exposition aux rayonnements IC établies pour un environnement non contrôlé. Cet équipement doit être installé et utilisé avec un minimum de 30 cm de distance entre la source de rayonnement et des personnes ou des animaux. (missing or bad snippet)
Taiwan Compliance Information
Extreme Networks AP460C                                                                                                                                                                      
 5.25-5.35                                                                        
Taiwan MPE Warning
      MPE   (MPE) 1mW/cm2      0.734 mW/cm2 "avoid affecting the operation of nearby radar systems".               " High-gain directional antennas can only be used in stationary point-to-point systems."                      
Cloud Terms of Service | Evaluation Agreement | Data Privacy and Protection
Copyright © Extreme Networks, Inc. 6480 Via Del Oro, San Jose CA, 95119 USA

AP460C, AP460S6C, AP460S12C Hardware Guide

25



References

Related FCC IDs:

Search Any Device: