Max Sun
I20Z70015-IOT-12 FCC Report WLAN 5G Rev0 Part1
SAMSUNG Electronics Co., Ltd. SMA115U Multi-band GSM/WCDMA/LTE phone with Bluetooth, WLAN ZCASMA115U ZCASMA115U sma115u
Not Your Device? Search For Manuals or Datasheets below:
File Info : application/pdf, 31 Pages, 5.34MB
Document DEVICE REPORTGetApplicationAttachment.html?id=4712527FCC PART 15 TEST REPORT No.I20Z70015-IOT12 for Client name: Samsung Electronics. Co., Ltd. Product name: Mobile phone Model name: SM-A115U With FCC ID: ZCASMA115U Hardware Version: REV1.0 Software Version: A115U.001 Issued Date: 2020-04-28 Note: The test results in this test report relate only to the devices specified in this report. This report shall not be reproduced except in full without the written approval of CTTL. The report must not be used by the client to claim product certification, approval, or endorsement by NVLAP, NIST, or any agency of the U.S.Government. Test Laboratory: CTTL-Telecommunication Technology Labs, CAICT No. 52, Huayuan North Road, Haidian District, Beijing, P. R. China 100191. Tel:+86(0)10-62304633-2512, Fax:+86(0)10-62304633-2504 Email: [email protected], website: www.caict.ac.cn ©Copyright. All rights reserved by CTTL. REPORT HISTORY Report Number I20Z70015-IOT12 Revision Rev.0 Description 1st edition No.I20Z70015-IOT12 Issue Date 2020-04-28 ©Copyright. All rights reserved by CTTL. Page 2 of 117 No.I20Z70015-IOT12 CONTENTS CONTENTS .................................................................................................................................................. 3 1. TEST LATORATORY.................................................................................................................. 5 1.1. INTRODUCTION & ACCREDITATION ................................................................................................. 5 1.2. TESTING LOCATION ......................................................................................................................... 5 1.3. TESTING ENVIRONMENT.................................................................................................................. 5 1.4. PROJECT DATE ................................................................................................................................. 5 1.5. SIGNATURE ...................................................................................................................................... 6 2. CLIENT INFORMATION ........................................................................................................... 7 2.1 APPLICANT INFORMATION ............................................................................................................... 7 2.2 MANUFACTURER INFORMATION ...................................................................................................... 7 3. EQUIPMENT UNDER TEST (EUT) AND ANCILLARYEQUIPMENT(AE) ....................... 8 3.1. ABOUT EUT .................................................................................................................................... 8 3.2. INTERNAL IDENTIFICATION OF EUT USED DURING THE TEST .......................................................... 8 3.3. INTERNAL IDENTIFICATION OF AE USED DURING THE TEST ............................................................. 8 3.4. GENERAL DESCRIPTION................................................................................................................... 9 3.5. INTERPRETATION OF THE TEST ENVIRONMENT................................................................................ 9 4. REFERENCE DOCUMENTS ..................................................................................................... 9 4.1. DOCUMENTS SUPPLIED BY APPLICANT ............................................................................................ 9 4.2. REFERENCE DOCUMENTS FOR TESTING ........................................................................................... 9 5. LABORATORY ENVIRONMENT........................................................................................... 10 6. SUMMARY OF TEST RESULTS ............................................................................................. 10 6.1. SUMMARY OF TEST RESULTS ......................................................................................................... 10 6.2. STATEMENTS.................................................................................................................................. 10 6.3. EXPLANATION OF RE-USE OF TEST DATA ........................................................................................ 10 7. TEST EQUIPMENTS UTILIZED .............................................................................................11 8. MEASUREMENT UNCERTAINTY ........................................................................................ 12 8.1 TRANSMITTER OUTPUT POWER ..................................................................................................... 12 8.2 PEAK POWER SPECTRAL DENSITY................................................................................................. 12 8.3 OCCUPIED CHANNEL BANDWIDTH ................................................................................................ 12 8.4 BAND EDGES COMPLIANCE ........................................................................................................... 12 8.5 SPURIOUS EMISSIONS .................................................................................................................... 12 8.6. AC POWER-LINE CONDUCTED EMISSION ...................................................................................... 12 ANNEX A: MEASUREMENT RESULTS................................................................................................ 13 A.1. MEASUREMENT METHOD .................................................................................................................. 13 A.2. MAXIMUM OUTPUT POWER ............................................................................................................... 14 ©Copyright. All rights reserved by CTTL. Page 3 of 117 No.I20Z70015-IOT12 A.3. PEAK POWER SPECTRAL DENSITY (CONDUCTED).............................................................................. 18 A.4. OCCUPIED 26DB BANDWIDTH(CONDUCTED)..................................................................................... 20 A.5. BAND EDGES COMPLIANCE ............................................................................................................... 48 A5.1 BAND EDGES - RADIATED ................................................................................................................. 48 A.6. TRANSMITTER SPURIOUS EMISSION .................................................................................................. 68 A.7. AC POWERLINE CONDUCTED EMISSION (150KHZ- 30MHZ)........................................................... 105 A.8. 99% OCCUPIED BANDWIDTH ........................................................................................................... 108 A.9. POWER CONTROL ..............................................................................................................................116 ANNEX B: ACCREDITATION CERTIFICATE....................................................................................117 ©Copyright. All rights reserved by CTTL. Page 4 of 117 No.I20Z70015-IOT12 1. TEST LATORATORY 1.1. Introduction & Accreditation Telecommunication Technology Labs, CAICT is an ISO/IEC 17025:2005 accredited test laboratory under NATIONAL VOLUNTARY LABORATORY ACCREDITATION PROGRAM (NVLAP) with lab code 600118-0, and is also an FCC accredited test laboratory (CN5017), and ISED accredited test laboratory (CN0066). The detail accreditation scope can be found on NVLAP website. 1.2. Testing Location Conducted testing Location: CTTL(huayuan North Road) Address: No. 52, Huayuan North Road, Haidian District, Beijing, P. R. China100191 Radiated testing Location: CTTL(BDA) Address: No.18A, Kangding Street, Beijing Economic-Technology Development Area, Beijing, P. R. China 100176 1.3. Testing Environment Normal Temperature: 15-35 Relative Humidity: 20-75% 1.4. Project date Testing Start Date: Testing End Date: 2020-03-16 2020-04-28 ©Copyright. All rights reserved by CTTL. Page 5 of 117 1.5. Signature Xie Xiuzhen ( Prepared this test report ) Zheng Wei (Reviewed this test report) Hu Xiaoyu (Approved this test report) No.I20Z70015-IOT12 ©Copyright. All rights reserved by CTTL. Page 6 of 117 No.I20Z70015-IOT12 2. CLIENT INFORMATION 2.1 Applicant Information Company Name: Samsung Electronics. Co., Ltd. Address: Contact: 19 Chapin Rd.,Building D Pine Brook, NJ 07058 Jenni Chun Email: Telephone: [email protected] +1-201-937-4203 Fax: / 2.2 Manufacturer Information Company Name: Samsung Electronics. Co., Ltd R5, A Tower 22 Address: 129,Samsung-ro,Yeongtong-gu, Korea Contact: JP KIM Email: [email protected] Telephone: +82-10-4376-0326 Fax: / Floor A-1,(Maetan Suwon-Si, Gyeonggi-do dong) 16677, ©Copyright. All rights reserved by CTTL. Page 7 of 117 No.I20Z70015-IOT12 3. EQUIPMENT UNDER TEST ANCILLARYEQUIPMENT(AE) 3.1. About EUT Description Model name FCC ID WLAN Frequency Range Type of modulation Antenna Voltage Mobile phone SM-A115U ZCASMA115U ISM Bands: -5150MHz~5250MHz -5250MHz~5350MHz -5470MHz~5725MHz OFDM Integral Antenna 3.85V 3.2. Internal Identification of EUT used during the test (EUT) AND EUT ID* SN or IMEI HW Version SW Version EUT1 / REV1.0 A115U.001 EUT2 / REV1.0 A115U.001 *EUT ID: is used to identify the test sample in the lab internally. 3.3. Internal Identification of AE used during the test AE ID* Description SN AE1 Battery / AE2 Charger / AE3 USB Cable / AE1 Model HQ-70N Manufacturer Ningde Amperex Technology Limited Capacitance 3900mAh/4000mAh Nominal voltage 3.85V AE2 Model EP-TA200 Manufacturer Samsung Electronics. Co., Ltd. Length of cable / AE3 Model EP-DR140AWE Manufacturer LUXSHARE-ICT (VIETNAM) LIMITED Length of cable / *AE ID: is used to identify the test sample in the lab internally. ©Copyright. All rights reserved by CTTL. Page 8 of 117 No.I20Z70015-IOT12 3.4. General Description The Equipment under Test (EUT) is a model of Mobile phone with integrated antenna and inbuilt battery. It has Bluetooth (EDR)function. It consists of normal options: travel charger, USB cable. Manual and specifications of the EUT were provided to fulfil the test. Samples undergoing test were selected by the client. 3.5. Interpretation of the Test Environment For the test methods, the test environment uncertainty figures correspond to an expansion factor k=2. Measurement Uncertainty Parameter Uncertainty temperature 0.48°C humidity 2 % DC voltages 0.003V 4. REFERENCE DOCUMENTS 4.1. Documents supplied by applicant EUT feature information is supplied by the applicant or manufacturer, which is the basis of testing. 4.2. Reference Documents for testing The following documents listed in this section are referred for testing. FCC Part15 ANSI C63.10 UNII: KDB 789033 D02 KDB 558074 D01 Title 47 of the Code of Federal Regulations; Chapter I Part 15 - Radio frequency devices Methods of Measurement of Radio-Noise Emissions from Low-Voltage Electrical and Electronic Equipment in the Range of 9 kHz to 40 GHz General U-NII Test Procedures New Rules v02r01 Federal Communications Commission Office of Engineering and Technology Laboratory Division GUIDANCE FOR COMPLIANCE MEASUREMENTS ON DIGITAL TRANSMISSION SYSTEM, FREQUENCY HOPPING SPREAD SPECTRUM SYSTEM, AND HYBRID SYSTEM DEVICES OPERATING UNDER SECTION 15.247 OF THE FCC RULES 2018 2013 2017-12 2019 ©Copyright. All rights reserved by CTTL. Page 9 of 117 No.I20Z70015-IOT12 5. LABORATORY ENVIRONMENT Conducted RF performance testing is performed in shielding room. EMC performance testing is performed in Semi-anechoic chamber. 6. SUMMARY OF TEST RESULTS 6.1. Summary of Test Results SUMMARY OF MEASUREMENT RESULTS Sub-clause of Part15E Sub-clause of IC Verdict Maximum Output Power 15.407 / BR Peak Power Spectral Density 15.407 / BR Occupied 26dB Bandwidth 15.403 / BR Band edge compliance (Radiated) 15.209 / BR Transmitter spurious emissions (Radiated) 15.407 / BR AC Powerline Conducted Emission (150kHz- 30MHz) 15.407 / BR Frequency Stability 15.407 / BR 99% Occupied bandwidth / / BR Transmit Power Control 15.407 / BR Please refer to ANNEX A for detail. Terms used in Verdict column P Pass, The EUT complies with the essential requirements in the standard. NM Not measured, The test was not measured by CTTL BR Re-use test data from basic model report. NA Not Applicable, The test was not applicable F Fail, The EUT does not comply with the essential requirements in the standard 6.2. Statements CTTL has evaluated the test cases requested by the client/manufacturer as listed in section 6.1 of this report for the EUT specified in section 3 according to the standards or reference documents listed in section 4.1. This report only deals with the WLAN function among the features described in section 3. 6.3. Explanation of re-use of test data The Equipment Under Test (EUT) model SM-A115U (FCC ID: ZCASMA115U) is a variant product of SM-A115A (FCC ID: ZCASMA115A), according to the declaration of changes provided by the applicant and FCC KDB publication 484596 D01, spot check measurements were performed on this device, all the test results are derived from test report No.I20Z70045-IOT02. For detail differences between two models please refer the Declaration of Changes document. For this report, all the test cases are tested under normal temperature and normal voltage, and also under norm humidity, the specific condition is shown as follows: ©Copyright. All rights reserved by CTTL. Page 10 of 117 Temperature Voltage Humidity 26 3.85V 44% No.I20Z70015-IOT12 7. TEST EQUIPMENTS UTILIZED Conducted test system No. Equipment Model Vector Signal 1 FSQ40 Analyzer 2 LISN ENV216 3 Test Receiver ESCI 4 Shielding Room S81 Serial Number 200089 825562/028 100766 / Manufacturer Rohde & Schwarz R&S R&S ETS-Lindgren Calibration Period 1 year 1 year 1 year / Calibration Due date 2020-05-15 2020-09-05 2021-03-11 / Radiated emission test system No. Equipment Model Serial Number 1 Test Receiver ESU26 100376 2 BiLog Antenna VULB9163 9163-482 Dual-Ridge 3 Waveguide Horn 3117 00139065 Antenna Dual-Ridge 4 Waveguide Horn 3116 2663 Antenna Vector Signal 5 FSV40 101047 Analyzer Manufacturer Rohde & Schwarz Schwarzbeck Calibration Calibration Period Due date 1 year 2020-10-30 1 year 2020-09-16 ETS-Lindgren 1 year 2020-11-10 ETS-Lindgren Rohde & Schwarz 1 year 2020-06-18 1 year 2020-05-16 ©Copyright. All rights reserved by CTTL. Page 11 of 117 8. Measurement Uncertainty 8.1 Transmitter Output Power Measurement Uncertainty: 0.387dB,k=1.96 8.2 Peak Power Spectral Density Measurement Uncertainty: 0.705dB,k=1.96 8.3 Occupied Channel Bandwidth Measurement Uncertainty: 60.80Hz,k=1.96 8.4 Band Edges Compliance Measurement Uncertainty : 0.62dB,k=1.96 8.5 Spurious Emissions Conducted (k=1.96) Frequency Range 30MHz f 2GHz 2GHz f 3.6GHz 3.6GHz f 8GHz 8GHz f 12.75GHz 12.75GHz f 26GHz 26GHz f 40GHz Radiated (k=2) Frequency Range 9kHz-30MHz 30MHz f 1GHz 1GHz f 18GHz 18GHz f 40GHz 8.6. AC Power-line Conducted Emission Measurement Uncertainty : 3.10dB,k=2 No.I20Z70015-IOT12 Uncertainty(dB) 1.22 1.22 1.22 1.51 1.51 1.59 Uncertainty(dB) / 5.40 4.32 5.26 ©Copyright. All rights reserved by CTTL. Page 12 of 117 ANNEX A: MEASUREMENT RESULTS A.1. Measurement Method A.1.1. Conducted Measurements 1). Connect the EUT to the test system correctly. 2). Set the EUT to the required work mode. 3). Set the EUT to the required channel. 4). Set the spectrum analyzer to start measurement. 5). Record the values. Vector Signal Analyzer No.I20Z70015-IOT12 EUT Attenuator Shielding room Vector Signal Analyzer A.1.2. Radiated Emission Measurements In the case of radiated emission, the used settings are as follows, Sweep frequency from 30 MHz to 1GHz, RBW = 100 kHz, VBW = 300 kHz; Sweep frequency from 1 GHz to 26GHz, RBW = 1MHz, VBW = 10Hz; Antenna Antenna EUT Anechoic Chamber Vector Signal Analyzer (Test Receiver) The measurement is made according to KDB 789033 The radiated emission test is performed in semi-anechoic chamber. The distance from the EUT to the reference point of measurement antenna is 3m. The test is carried out on both vertical and horizontal polarization and only maximization result of both polarizations is kept. During the test, the turntable is rotated 360°and the measurement antenna is moved from 1m to 4m to get the maximization result. ©Copyright. All rights reserved by CTTL. Page 13 of 117 No.I20Z70015-IOT12 A.2. Maximum output Power Measurement Limit and Method: Standard Frequency (MHz) Limit (dBm) 5150MHz~5250MHz 24dBm FCC CRF Part 15.407(a) 5250MHz~5350MHz 24dBm or 11+10logB 5470MHz~5725MHz 24dBm or 11+10logB Limit use the less value, and B is the 26dB bandwidth. The measurementmethod SA-2 is made according to KDB 789033 Note For straddle channel 20MHz Bandwidth 5720MHz, Conducted Output Power Limit: 802.11a=11+10*log(B)=23.18, B=23.05/2+5=16.53MHz, 802.11n-HT20=11+10*log(B)=23.22, B=23.35/2+5=16.68MHz, 802.11ac-VHT20=11+10*log(B)=23.19, B=23.10/2+5=16.55MHz, For straddle channel 40/80MHz Bandwidth, conducted output power limit=24 dBm 802.11n-HT40: B=44.00/2+15=37MHz, 802.11ac-VHT40: B=43.52/2+15=36.76MHz, 802.11ac-VHT80: B=84.32/2+35=77.16MHz, Duty Cycle 11a 6 99% 11n-20 MCS0 99% 11n-40 MCS0 98% 11ac-20 MCS0 98% 11ac-40 MCS0 98% 11ac-80 MCS0 96% 9 99% MCS1 98% MCS1 98% MCS1 98% MCS1 96% MCS1 94% 12 98% MCS2 98% MCS2 98% MCS2 98% MCS2 94% MCS2 91% 18 98% MCS3 98% MCS3 98% MCS3 97% MCS3 94% MCS3 89% 24 98% MCS4 98% MCS4 97% MCS4 95% MCS4 93% MCS4 88% 36 98% MCS5 98% MCS5 97% MCS5 94% MCS5 91% MCS5 88% 48 98% MCS6 98% MCS6 96% MCS6 94% MCS6 90% MCS6 88% 54 98% MCS7 98% MCS7 96% MCS7 94% MCS7 90% MCS7 88% MCS8 94% MCS8 90% MCS8 87% MCS9 90% MCS9 87% ©Copyright. All rights reserved by CTTL. Page 14 of 117 No.I20Z70015-IOT12 Measurement Results: 802.11a mode Test Result (dBm) Mode Frequency Data Rate (Mbps) 6 9 12 18 24 36 48 54 5180MHz 17.22 17.17 17.18 17.17 16.60 16.66 16.08 15.57 5200MHz 17.28 / / / / / / / 5240MHz 17.42 / / / / / / / 5260MHz 17.38 / / / / / / / 5280MHz 17.33 / / / / / / / 802.11a 5320MHz 17.35 / / / / / / / 5500MHz 17.55 / / / / / / / 5580MHz 17.25 / / / / / / / 5700MHz 17.23 / / / / / / / 5720MHz 17.21 / / / / / / / The data rate 6Mbps is selected as worse condition, and the following cases are performed with this condition. 802.11n-HT20 mode Test Result (dBm) Mode Frequency Data Rate MCS0 MCS1 MCS2 MCS3 MCS4 MCS5 MCS6 MCS7 5180MHz 17.36 17.35 17.34 17.32 16.81 16.23 16.21 15.71 5200MHz 17.30 / / / / / / / 5240MHz 17.43 / / / / / / / 5260MHz 17.45 / / / / / / / 802.11n 5280MHz 17.36 / / / / / / / (HT20) 5320MHz 17.37 / / / / / / / 5500MHz 17.58 / / / / / / / 5580MHz 17.21 / / / / / / / 5700MHz 17.24 / / / / / / / 5720MHz 17.18 / / / / / / / The data rate MCS0 is selected as worse condition, and the following cases are performed with this condition. ©Copyright. All rights reserved by CTTL. Page 15 of 117 No.I20Z70015-IOT12 802.11ac-HT20 mode Mode 802.11ac (HT20) Frequency 5180MHz 5200MHz 5240MHz 5260MHz 5280MHz 5320MHz 5500MHz 5580MHz 5700MHz 5720MHz MCS0 17.41 17.38 17.51 17.49 17.40 17.43 17.66 17.35 17.35 17.22 MCS1 17.30 / / / / / / / / / MCS2 17.28 / / / / / / / / / Test Result (dBm) Data Rate MCS3 MCS4 MCS5 17.24 16.74 16.33 / / / / / / / / / / / / / / / / / / / / / / / / / / / MCS6 16.25 / / / / / / / / / MCS7 15.23 / / / / / / / / / MCS8 15.07 / / / / / / / / / The data rate MCS0 is selected as worse condition, and the following cases are performed with this condition. 802.11n-HT40 mode Mode Frequency 802.11n (HT40) 5190MHz 5230MHz 5270MHz 5310MHz 5510MHz 5550MHz 5670MHz 5710MHz MCS0 17.30 17.50 17.59 17.86 17.49 17.56 17.86 18.06 MCS1 / 17.47 / 17.83 / / / 18.05 Test Result (dBm) Data Rate MCS2 MCS3 MCS4 MCS5 / / / / 16.93 16.88 16.38 16.35 / / / / 17.32 17.24 16.69 16.69 / / / / / / / / / / / / 17.60 17.51 16.96 16.90 MCS6 / 15.86 / 16.18 / / / 16.41 MCS7 / 15.86 / 16.03 / / / 16.40 The data rate MCS0 is selected as worse condition, and the following cases are performed with this condition. ©Copyright. All rights reserved by CTTL. Page 16 of 117 No.I20Z70015-IOT12 802.11ac-HT40 mode Mode 802.11ac (HT40) Frequen cy 5190MHz 5230MHz 5270MHz 5310MHz 5510MHz 5550MHz 5670MHz 5710MHz MCS0 17.39 / / / / / / / MCS1 17.44 / / / / / / / MCS2 17.58 17.49 17.51 17.48 17.62 17.47 17.56 17.40 Test Result (dBm) Data Rate MCS3 MCS4 MCS5 MCS6 17.45 16.99 16.99 16.06 / / / / / / / / / / / / / / / / / / / / / / / / / / / / MCS7 14.98 / / / / / / / MCS8 15.00 / / / / / / / MCS9 13.92 / / / / / / / The data rate MCS2 is selected as worse condition, and the following cases are performed with this condition. 802.11ac-HT80 mode Mode 802.11ac (HT80) Frequen cy 5210MHz 5290MHz 5530MHz 5610MHz 5690MHz MCS0 17.61 17.61 17.62 17.66 17.55 MCS1 17.45 / / / / MCS2 17.46 / / / / Test Result (dBm) Data Rate MCS3 MCS4 MCS5 MCS6 16.56 16.45 15.51 15.38 / / / / / / / / / / / / / / / / MCS7 14.46 / / / / MCS8 14.42 / / / / MCS9 13.40 / / / / The data rate MCS0 is selected as worse condition, and the following cases are performed with this condition. The spot check is 17.14dBm(11n-HT40 ch142 MCS0). ©Copyright. All rights reserved by CTTL. Page 17 of 117 No.I20Z70015-IOT12 A.3. Peak Power Spectral Density (conducted) Measurement Limit: Standard Frequency (MHz) Limit (dBm/MHz) 5150MHz~5250MHz 11 FCC CRF Part 15.407(a) 5250MHz~5350MHz 11 5470MHz~5725MHz 11 The output power measurement method Section F is made according to KDB 789033 Measurement Results: Mode Frequency 5180 MHz 5200 MHz 5240 MHz 5260 MHz 802.11a 5280 MHz 5320 MHz 5500 MHz 5580 MHz 5700 MHz 5720 MHZ 5180 MHz 5200 MHz 5240 MHz 5260 MHz 802.11n 5280 MHz HT20 5320 MHz 5500 MHz 5580 MHz 5700 MHz 5720 MHZ 5180 MHz 5200 MHz 5240 MHz 5260 MHz 802.11ac 5280 MHz HT20 5320 MHz 5500 MHz 5580 MHz 5700 MHz 5720 MHZ 802.11n 5190 MHz ©Copyright. All rights reserved by CTTL. Power Spectral Density (dBm/MHz) 7.19 7.39 7.47 7.43 7.10 6.98 7.56 7.08 6.97 7.47 7.15 7.10 7.10 7.15 6.94 6.88 7.03 6.89 6.79 6.73 6.69 6.54 6.77 6.96 6.80 6.99 6.87 6.78 6.78 6.73 4.41 Conclusion P P P P P P P P P P P P P P P P P P P P P P P P P P P P P P P Page 18 of 117 No.I20Z70015-IOT12 HT40 5230 MHz 4.55 P 5270 MHz 4.39 P 5310 MHz 4.16 P 5510 MHz 4.37 P 5550 MHz 4.38 P 5670 MHz 4.38 P 5710 MHZ 4.21 P 5190 MHz 4.58 P 5230 MHz 4.58 P 5270 MHz 4.76 P 802.11ac 5310 MHz 4.63 P HT40 5510 MHz 4.93 P 5550 MHz 4.77 P 5670 MHz 4.81 P 5710 MHZ 4.62 P 5210 MHz 1.72 P 5290 MHz 1.55 P 802.11ac 5530 MHz 1.94 P HT80 5610 MHz 1.81 P 5690 MHz 1.66 P Conclusion: PASS ©Copyright. All rights reserved by CTTL. Page 19 of 117 A.4. Occupied 26dB Bandwidth(conducted) Measurement Limit: Standard FCC 47 CFR Part 15.403 (i) The measurement is made according to KDB 789033 Measurement Uncertainty: Measurement Uncertainty Limit (kHz) / 60.80Hz Measurement Result: Mode Frequency 802.11a 802.11n HT20 5180 MHz 5200 MHz 5240 MHz 5260 MHz 5280 MHz 5320 MHz 5500 MHz 5580 MHz 5700 MHz 5720 MHz 5180 MHz 5200 MHz 5240 MHz 5260 MHz 5280 MHz 5320 MHz 5500 MHz 5580 MHz 5700 MHz 5720 MHz Occupied 26dB Bandwidth ( MHz) Fig.1 23.20 Fig.2 22.95 Fig.3 23.00 Fig.4 23.15 Fig.5 23.25 Fig.6 23.15 Fig.7 23.05 Fig.8 23.20 Fig.9 23.45 Fig.10 23.05 Fig.11 23.25 Fig.12 23.50 Fig.13 23.35 Fig.14 23.35 Fig.15 23.45 Fig.16 23.40 Fig.17 24.25 Fig.18 23.50 Fig.19 23.30 Fig.20 23.35 No.I20Z70015-IOT12 conclusion P P P P P P P P P P P P P P P P P P P P 802.11ac HT20 5180 MHz 5200 MHz 5240 MHz 5260 MHz 5280 MHz 5320 MHz 5500 MHz 5580 MHz 5700 MHz ©Copyright. All rights reserved by CTTL. Fig.21 Fig.22 Fig.23 Fig.24 Fig.25 Fig.26 Fig.27 Fig.28 Fig.29 23.10 23.15 23.15 23.15 23.15 23.10 23.05 23.20 23.10 P P P P P P P P P Page 20 of 117 802.11n HT40 802.11ac HT40 802.11ac HT80 5720 MHz 5190 MHz 5230 MHz 5270 MHz 5310 MHz 5510 MHz 5550 MHz 5670 MHz 5710 MHz 5190 MHz 5230 MHz 5270 MHz 5310 MHz 5510 MHz 5550 MHz 5670 MHz 5710 MHz 5210 MHz 5290 MHz 5530 MHz 5610 MHz 5690 MHz Fig.30 Fig.31 Fig.32 Fig.33 Fig.34 Fig.35 Fig.36 Fig.37 Fig.38 Fig.39 Fig.40 Fig.41 Fig.42 Fig.43 Fig.44 Fig.45 Fig.46 Fig.47 Fig.48 Fig.49 Fig.50 Fig.51 23.10 44.16 44.56 44.00 44.56 43.84 44.00 44.72 44.00 43.68 43.52 43.60 43.68 43.44 43.60 43.52 43.52 84.80 84.64 84.48 84.48 84.32 No.I20Z70015-IOT12 P P P P P P P P P P P P P P P P P P P P P P Conclusion: PASS Test graphs as below: ©Copyright. All rights reserved by CTTL. Page 21 of 117 No.I20Z70015-IOT12 Fig.1 Occupied 26dB Bandwidth (802.11a, 5180MHz) Fig.2 Occupied 26dB Bandwidth (802.11a, 5200MHz) ©Copyright. All rights reserved by CTTL. Page 22 of 117 No.I20Z70015-IOT12 Fig.3 Occupied 26dB Bandwidth (802.11a, 5240MHz) Fig.4 Occupied 26dB Bandwidth (802.11a, 5260MHz) ©Copyright. All rights reserved by CTTL. Page 23 of 117 No.I20Z70015-IOT12 Fig.5 Occupied 26dB Bandwidth (802.11a, 5280MHz) Fig.6 Occupied 26dB Bandwidth (802.11a, 5320MHz) ©Copyright. All rights reserved by CTTL. Page 24 of 117 No.I20Z70015-IOT12 Fig.7 Occupied 26dB Bandwidth (802.11a, 5500MHz) Fig.8 Occupied 26dB Bandwidth (802.11a, 5580MHz) ©Copyright. All rights reserved by CTTL. Page 25 of 117 No.I20Z70015-IOT12 Fig.9 Occupied 26dB Bandwidth (802.11a, 5700MHz) Fig.10 Occupied 26dB Bandwidth (802.11a, 5720MHz) ©Copyright. All rights reserved by CTTL. Page 26 of 117 No.I20Z70015-IOT12 Fig.11 Occupied 26dB Bandwidth (802.11n-HT20, 5180MHz) Fig.12 Occupied 26dB Bandwidth (802.11n-HT20, 5200MHz) ©Copyright. All rights reserved by CTTL. Page 27 of 117 No.I20Z70015-IOT12 Fig.13 Occupied 26dB Bandwidth (802.11n-HT20, 5240MHz) Fig.14 Occupied 26dB Bandwidth (802.11n-HT20, 5260MHz) ©Copyright. All rights reserved by CTTL. Page 28 of 117 No.I20Z70015-IOT12 Fig.15 Occupied 26dB Bandwidth (802.11n-HT20, 5280MHz) Fig.16 Occupied 26dB Bandwidth (802.11n-HT20, 5320MHz) ©Copyright. All rights reserved by CTTL. Page 29 of 117 No.I20Z70015-IOT12 Fig.17 Occupied 26dB Bandwidth (802. 11n-HT20, 5500MHz) Fig.18 Occupied 26dB Bandwidth (802. 11n-HT20, 5580MHz) ©Copyright. All rights reserved by CTTL. Page 30 of 117 No.I20Z70015-IOT12 Fig.19 Occupied 26dB Bandwidth (802. 11n-HT20, 5700MHz) Fig.20 Occupied 26dB Bandwidth (802. 11n-HT20, 5720MHz) ©Copyright. All rights reserved by CTTL. Page 31 of 117
Related FCC IDs:
- ZCASMA115U - SAMSUNG Electronics Co., Ltd. Multi-band GSM/WCDMA/LTE phone with Bluetooth, WLAN [SMA115U] Microsoft Word 2016