Acer Laptops ConceptD 5 User Manual

CN515-71 P (CitigoC CFS) UM (date) EN.book

1707072

CN515-71 P (CitigoC CFS) UM (date) EN

This revision: March 2020 Register your ConceptD product 1.Ensure you are connected to the Internet. 2.Open the Acer Product Registration app. ... please refer to the User’s Manual. This guide contains detailed information on such subjects as system utilities, data recovery, expansion options and troubleshooting. ...

bios utility

This revision: March 2020. Register your ConceptD ... Enable Bluetooth and add a device .......... 26 ... Guidelines for connecting to a network and using Bluetooth.

User Manual for Acer models including: Laptops ConceptD 5, CN515-71 P

PDF Viewing Options

Not Your Device? Search For Manuals or Datasheets below:

File Info : application/pdf, 79 Pages, 7.31MB

Document DEVICE REPORT1063695081

2 -
© 2020. All Rights Reserved. ConceptD 5 / ConceptD 5 Pro Covers: CN515-71 / CN515-71P This revision: March 2020
Important
This manual contains proprietary information that is protected by copyright laws. The information contained in this manual is subject to change without notice. Some features described in this manual may not be supported depending on the Operating System version. Images provided herein are for reference only and may contain information or features that do not apply to your computer. Acer Group shall not be liable for technical or editorial errors or omissions contained in this manual.
Register your ConceptD product
1. Ensure you are connected to the Internet. 2. Open the Acer Product Registration app. 3. Install any required updates. 4. Sign up for an Acer ID or sign in if you already have an Acer ID, it
will automatically register your product. After we receive your product registration, you will be sent a confirmation email with important data.
Model number: _________________________________ Serial number: _________________________________ Date of purchase: ______________________________ Place of purchase: ______________________________

TABLE OF CONTENTS

Table of contents - 3

First things first

Your guides ............................................. 6

Basic care and tips for using your

computer.................................................. 6

Turning your computer off........................... 6

Taking care of your computer ..................... 7

Taking care of your AC adapter .................. 8

Cleaning and servicing................................ 8

Your ConceptD notebook tour

Screen view ............................................. 9

Keyboard view ....................................... 10

Left view ................................................ 11

USB Type-C information ........................... 11

USB 3.1 Gen 1 information ....................... 11

Right view ............................................. 12

Rear view............................................... 12

Base view .............................................. 13

Using the keyboard

Lock keys............................................... 14

Hotkeys.................................................. 14

Windows keys........................................ 15

Using the Precision Touchpad

Touchpad gestures................................ 16

Changing touchpad settings .................. 18

Recovery

Creating a factory default backup.......... 19

Backing up your wireless and LAN

drivers.................................................... 21

Restoring your computer ....................... 21

Reset this PC and keep my files ............... 22

Reset this PC and remove everything ...... 23

Using a Bluetooth connection

Enabling and disabling Bluetooth .......... 26

Enable Bluetooth and add a device .......... 26

Connecting to the Internet

Connecting to a wireless network.......... 28

Connecting to a wireless LAN................... 28

Connecting with a cable ........................ 31

Built-in network feature ............................. 31

Connecting to a cellular network ........... 31

ConceptD Palette

The ConceptD Palette main screen....... 32

Color profile setting ................................... 32

TrueHarmony setting ................................ 33

Monitoring.............................................. 33

Split Screen ........................................... 34

App Center ............................................ 34

Advanced Settings................................. 35

Enable PrtScn Key to launch Screen Snip

tool ............................................................ 35

Manage the copied items in Clipboard...... 36
Set color profile on ConceptD monitor... 38
Sync up the color profile ........................... 38 Change the color profile............................ 38

Bluelight Shield

Securing your computer

Using a computer security lock.............. 42

Using passwords ................................... 42

Entering passwords .................................. 43

BIOS utility

Boot sequence....................................... 44

Setting passwords ................................. 44

Power management

Saving power ......................................... 45

Battery pack

Battery characteristics ........................... 47

Charging the battery ................................. 47

Optimizing battery life ............................... 48

Checking the battery level......................... 49

Battery-low warning .................................. 49

Traveling with your computer

Disconnecting from the desktop ............ 50

Moving around ....................................... 50

Preparing the computer ............................ 50

What to bring to meetings ......................... 51

Taking the computer home .................... 51

Preparing the computer ............................ 51

What to take with you................................ 52

Special considerations .............................. 52

Setting up a home office ........................... 52
Traveling with the computer................... 53

Preparing the computer ............................ 53

What to take with you................................ 53

Special considerations .............................. 53

Traveling internationally......................... 53

Preparing the computer ............................ 54

What to bring with you .............................. 54

Special considerations .............................. 54

Universal Serial Bus (USB)

USB Type-C port

Video and audio connectors

Connecting a monitor............................. 58

Headphones and microphone................ 58

HDMI

Frequently asked questions

Requesting service ................................ 63

Tips and hints for using Windows 10 ..... 64

How do I get to Start? ............................... 64

How do I turn off my computer?................ 64

How do I unlock my computer?................. 64

4 - Table of contents
How do I set the alarm? ............................ 66 Where are my apps?................................. 67 What is a Microsoft ID (account)?............. 67 How do I check for Windows updates?..... 68 Where can I get more information?........... 68
Troubleshooting..................................... 69
Troubleshooting tips.................................. 69 Error messages......................................... 69

Internet and online security

First steps on the net ............................. 71

Protecting your computer.......................... 71

Choose an Internet Service Provider ........ 71

Network connections................................. 73

Surf the Net!.............................................. 74

Internet security software.......................... 75

Getting started...
In this section you will find:
· Useful information on caring for your computer and your health · Where to find the power button, ports and connectors · Tips and tricks for using the touchpad and keyboard · How to create recovery backups · Guidelines for connecting to a network and using Bluetooth · Information on using ConceptD's bundled software

6 - First things first

FIRST THINGS FIRST

We would like to thank you for making this ConceptD notebook your choice for meeting your mobile computing needs.
Your guides
To help you use your ConceptD notebook, we have designed a set of guides: First off, the Setup Guide helps you get started with setting up your computer. The Quick Guide introduces you to the basic features and functions of your new computer. For more on how your computer can help you to be more productive, please refer to the User's Manual. This guide contains detailed information on such subjects as system utilities, data recovery, expansion options and troubleshooting. Once you have connected to the internet, you can download updates for your computer from: http://go.acer.com/?id=17883
1. The link will open the Acer Support webpage. 2. Scroll down to Drivers and Manuals and search for your model by
pasting in or manually entering the serial number, SNID, or product model. 3. From this page you can also download and install the Acer identification utility that will automatically detect your computer's serial number and SNID and allow you to copy it to the clipboard. 4. Once you have found your product model, any updates, or documents will be listed.
Basic care and tips for using your computer
Turning your computer off
To turn the power off, do any of the following: · Use the Windows shutdown command: Press the Windows key or
select the Windows Start button, select Power > Shut down.

First things first - 7
· Right-click the Windows Start button > Shut down or sign out > Shut down.
If you need to power down the computer for a short while, but don't want to completely shut it down, you can put it to Sleep by doing any of the following: · Press the power button. · Press the sleep hotkey. · Press the Windows key or select the Windows Start button, select
Power > Sleep. · Right-click the Windows Start button > Shut down or sign out >
Sleep.
Note
If you cannot power off the computer normally, press and hold the power button for up to ten seconds to shut down the computer. If you turn off the computer and want to turn it on again, wait at least two seconds before powering up.
Taking care of your computer
Your computer will serve you well if you take care of it. · Only use the adapter provided with your device, or an Acer-
approved adapter to power your device. · Do not expose the computer to direct sunlight. Do not place it near
sources of heat, such as a radiator. · Do not expose the computer to temperatures below 0º C (32º F) or
above 50º C (122º F). · Do not subject the computer to magnetic fields. · Do not expose the computer to rain or moisture. · Do not spill water or any liquid on the computer. · Do not subject the computer to heavy shock or vibration. · Do not expose the computer to dust or dirt. · Never place objects on top of the computer. · Do not slam the computer display when you close it. · Never place the computer on uneven surfaces.

8 - First things first
Taking care of your AC adapter
Here are some ways to take care of your AC adapter: · Do not connect the adapter to any other device. · Do not step on the power cord or place heavy objects on top of it.
Route the power cord and any cables away from where people walk. · When unplugging the power cord, do not pull on the cord itself but
pull on the plug. · The total ampere ratings of the equipment plugged in should not
exceed the ampere rating of the cord if you are using an extension cord. Also, the total current rating of all equipment plugged into a single wall outlet should not exceed the fuse rating.
Cleaning and servicing
When cleaning the computer, follow these steps: 1. Turn off the computer. 2. Disconnect the AC adapter. 3. Use a soft, moist cloth. Do not use liquid or aerosol cleaners. If your computer is dropped or visibly damaged, or does not work normally, please contact your nearest authorized Acer service center.

Your ConceptD notebook tour - 9
YOUR CONCEPTD NOTEBOOK TOUR
After setting up your computer as illustrated in the Setup Guide, let us show you around your new ConceptD computer.
Screen view
1
2
3

# Icon Item

Description

Microphones

Internal stereo digital microphones for sound recording.

Web camera for video

Webcam

communication. A light next to the webcam indicates

that the webcam is active.

Screen

Displays computer output.

10 - Your ConceptD notebook tour
Keyboard view

3 1

# Icon Item

Description

For entering data into your computer.

Backlit keyboard See "Using the keyboard" on page

14.

Touchpad

Touch-sensitive pointing device.

Power button Turns the computer on and off.

Left view

Your ConceptD notebook tour - 11

3 45 6

# Icon Item

Description

Kensington lock Connects to a Kensington-compatible

slot

security lock.

Connects to an Ethernet 10/100/

Ethernet (RJ-45) 1000-based network.

port

Pull the lip down to open the port

fully.

HDMI port

Supports high-definition digital video connections.

USB

Type-C

port

Connects to USB devices Type-C connector.

with

USB

USB port

Connects to USB devices.

USB port with

power-off

Connects to USB devices.

charging

USB Type-C information

· USB 3.1 Gen 1 with transfer speeds up to 5 Gbps.

USB 3.1 Gen 1 information

· USB 3.1 Gen 1 compatible ports are blue. · Compatible with USB 3.1 Gen 1 and earlier devices. · For optimal performance, use USB 3.1 Gen 1-certified devices. · Defined by the USB 3.1 Gen 1 specification (SuperSpeed USB).

12 - Your ConceptD notebook tour
Right view

12 3 4

# Icon Item

Description

Headset/ speaker jack

Connects to audio devices (e.g., speakers, headphones)

USB port

Connects to USB devices.

Power indicator

Indicates the computer's power status.

Indicates the computer's battery

status.

Blinking Amber when the battery is

Battery indicator charging or reaches the low battery

level.

Amber when fully charged (with the

AC adapter plugged in).

DC-in jack

Connects to an AC adapter.

Ventilation and cooling fan

Allows the computer to stay cool. Do not cover or obstruct the
openings.

Rear view

# Icon Item

Description

Ventilation and cooling fan

Allows the computer to stay cool. Do not cover or obstruct the
openings.

Base view
1

Your ConceptD notebook tour - 13

# Icon Item

Description

Ventilation and cooling fan

Allows the computer to stay cool. Do not cover or obstruct the
openings.

Speakers

Deliver stereo audio output.

14 - Using the keyboard
USING THE KEYBOARD

The keyboard has full-sized keys, a numeric keypad, separate cursor, lock, Windows keys and hotkeys.

Lock keys

The keyboard has lock keys which you can use to turn keyboard functions on and off.

Lock key Caps Lock

Description
When Caps Lock is on, all alphabetic characters typed are in uppercase.

Num Lock Scroll Lock

When Num Lock is on, the keypad is in numeric mode. The keys function as a calculator (complete with the arithmetic operators +, -, *, and /). Use this mode when you need to do a lot of numeric data entry.
When Scroll Lock is on, the screen moves one line up or down when you press the up or down arrow keys respectively. Scroll Lock does not work with some applications.

Hotkeys

To activate hotkeys, press and hold the Fn key before pressing the other key in the hotkey combination.

Hotkey

Icon Description

Fn + F3

Turns on / off the computer's network devices.

Fn + F4 Fn + F5 Fn + F6 Fn + F7

Puts the computer in Sleep mode.
Switches display output between the display screen, external monitor (if connected) and both. Turns the display screen backlight off to save power. Press any key to return.
Turns the built-in touchpad on and off.

Using the keyboard - 15

Hotkey Fn + F8 Fn + F9
Fn + F10 Fn + F11

Icon Description
Turns the speakers on and off.
Decreases the intensity of the keyboard backlight. Increases the intensity of the keyboard backlight.
Pause Sends a Break Command.

Fn + F12 Scr Lk Turns Scroll Lock on or off.

Fn + Del

Ins Turns Insert on or off.

Fn + Pg Up Fn + Pg Dn

Play or pause a selected media file. Return to the previous media file.

Fn + End

Jump to the next media file.

Fn + Fn +

Increases the sound volume. Decreases the sound volume.

Fn +

Decreases the screen brightness.

Fn +

Increases the screen brightness.

Windows keys

The keyboard has two keys that perform Windows-specific functions.

Key Windows key
Application key

Description
Pressed alone it returns to the Start screen or to return to the last open app.
This key has the same effect as clicking the right mouse button.

16 - Using the Precision Touchpad
USING THE PRECISION TOUCHPAD
The touchpad controls the arrow (or 'cursor') on the screen. As you slide your finger across the touchpad, the cursor will follow this movement. The Precision Touchpad (PTP) is designed to provide a more uniform, smooth, and accurate touchpad experience. Many applications support precision touchpad gestures that use one or more fingers, however, some gestures may not be supported by the specific application or program you are using.
Touchpad gestures
Single-finger slide
Slide a finger across the touchpad to move the cursor.
Single-finger press or tap
Press the touchpad down, or lightly tap the touchpad with your finger, to perform a 'click', which will select or start an item. Quickly repeat the tap to perform a double tap or 'double click'.
Two-finger press
Lightly tap the touchpad with two fingers to perform a 'right click'. In the Start screen, this will toggle the app commands. In most apps this will open a context menu related to the selected item.
Two-finger slide
Swiftly scroll through web pages, documents and playlists by placing two fingers on the touchpad and moving both in any direction.
Two-finger pinch
Zoom in and out of photos, maps and documents with a simple finger-and-thumb gesture.

Using the Precision Touchpad - 17
Three-finger press
Lightly tap the touchpad with three fingers to open the Search Windows.
Three-finger swipe
Swipe across the touchpad with three fingers. · Swipe up to open Task View. Move the cursor over a
window and tap the touchpad to select that window, or swipe downwards to exit Task View. · Swipe down to minimize all open windows and show Desktop; swipe upwards to restore the minimized windows. · Swipe left or right to switch between open windows.
Four-finger press
Lightly tap the touchpad with four fingers to open the Action Center.
Four-finger swipe
Swipe across the touchpad with four fingers. · Swipe up to open Task View. Move the cursor over a
window and tap the touchpad to select that window, or swipe downwards to exit Task View. · Swipe down to minimize all open windows and show Desktop; swipe upwards to restore the minimized windows.
The precision touchpad includes added technology features that help recognize and prevent unintentional gestures such as accidental taps, gestures, and pointer movement.
Note
The touchpad is sensitive to finger movement; the lighter the touch, the better the response. Please keep the touchpad and your fingers dry and clean.

18 - Using the Precision Touchpad
Changing touchpad settings
To change the touchpad settings to suit your personal requirements, please do the following. 1. In the icon tray in the lower right-hand corner of the screen, select
the Notifications icon to open the Notifications pane.
2. Select All settings.
3. Select Devices > Touchpad
4. Now you can adjust the settings to suit your personal needs. You can switch off the touchpad if you prefer to use a mouse. Or you can adjust the touchpad sensitivity to suit your needs. Scroll down to see more settings.

RECOVERY

Recovery - 19

If you are having trouble with your computer, and the frequently asked questions (see Got a question? on page 60) do not help, you can recover your computer.
This section describes the recovery tools available on your computer. Acer provides Acer Care Center, which allows you to reset your PC, refresh your PC, or create a factory default backup. If you cannot access Acer Care Center, click Settings in the Start menu, select Update & Security and then click Recovery.
Note
Acer Care Center vary depending on model or Operating System.

Important
We recommend that you create a Factory Default Backup as soon as possible. In certain situations a full recovery will require a USB recovery backup.
Creating a factory default backup
Recovery Management allows you to quickly and easily back up your operating system, installed apps and data.
Note
Since the recovery backup requires at least 8 GB of storage after formatting, it is recommended to use a USB drive with a capacity of 16 GB or larger.

20 - Recovery
1. From Start, select Care Center then Recovery Management. 2. Select the Backup tab and click Get Started for Create Factory
Default Backup to open the Recovery Drive window.
3. Make sure Back up system files to the recovery drive is selected and click Next.

Recovery - 21
4. Plug in the USB drive and wait for the PC to detect the USB drive then click Next.
5. Everything on the drive will be deleted. Click Create to continue. 6. You will be shown the backup progress on the screen. 7. Follow the process until it completes. 8. Unplug the USB drive and label it clearly.
Important
Write a unique, descriptive label on the backup, such as 'Windows Recovery Backup'. Make sure you keep the backup in a safe place that you will remember.
Backing up your wireless and LAN drivers
Back up your wireless and LAN drivers. You can use these backups to install the wireless and LAN drivers if you install another operating system. 1. From Start, select Care Center then Recovery Management. 2. Select the Backup tab and click Get started for Backup wireless
and LAN drivers. Choose a folder to save your drivers and select OK.
Restoring your computer
Recovery Management allows you to quickly and easily restore your computer back to its default status. You can choose to keep your files or remove them before reinstalling Windows.

22 - Recovery
Reset this PC and keep my files
1. From Start, select Care Center then Recovery Management. 2. Select the Restore tab and click Get started to Choose an option.
3. Select Keep my files to refresh your PC and reinstall your operating system without removing your personal files. Click Next to continue.
Important
If you have apps installed on your PC, they will be removed.

Recovery - 23
4. Resetting the PC will reinstall Windows, change settings back to their factory defaults and remove all preinstalled apps and programs without removing your personal files. Click Reset to continue.
5. You will be shown the reset progress on the screen. The screen will turn off during the reset process.
6. The screen will turn back on when it is installing Windows. Your PC will restart several times during the reset process.
7. Follow the process until it completes. 8. When your PC has completed the reset process, Windows will have
been reset back to its factory default settings without removing your personal files.
Reset this PC and remove everything
1. From Start, select Care Center then Recovery Management. 2. Select the Restore tab and click Get Started to Choose an option.

24 - Recovery
3. Select Remove everything to reset your PC back to its factory default. This process will reinstall your operating system and remove all of your personal files, apps, and settings.
4. Select Just remove my files if you are keeping your computer. This will be quicker, but less secure. Files may still be recovered with a file recovery program. Select Remove files and clean the drive if you are not keeping your computer. This process will take longer, but will be more secure.
Warning
Selecting "Remove files and clean the drive" will remove all of your personal files and accounts, along with pre-existing drivers that may affect your Windows installation.

5. Click Reset to continue.

Recovery - 25

6. You will be shown the reset progress on the screen. The screen will turn off during the reset process.
7. The screen will turn back on when it is installing Windows. Your PC will restart several times during the reset process.
8. Follow the process until it completes.
9. When your PC has completed the reset process, Windows will use factory default settings.

26 - Using a Bluetooth connection
USING A BLUETOOTH CONNECTION
Bluetooth is a technology enabling you to transfer data wirelessly over short distances between many different types of devices. Bluetoothenabled devices include computers, cell phones, tablets, wireless headsets, and keyboards. To use Bluetooth, you must ensure the following: 1. Bluetooth is enabled on both devices. 2. Your devices are "paired" (or connected).
Enabling and disabling Bluetooth
The Bluetooth adapter must be enabled on both devices. For your computer, this may be an external switch, a software setting, or a separate Bluetooth dongle plugged into the computer's USB port (if no internal Bluetooth adapter is available).
Note
Please check your devices owner's manual to determine how to turn on its Bluetooth adapter.
Enable Bluetooth and add a device
Every new device must first be "paired" with your computer's Bluetooth adapter. This means it must first be authenticated for security purposes. You only need to pair once. After that, simply turning on the Bluetooth adapter of both devices will connect them. Bluetooth on your computer is disabled by default. To enable your computer's Bluetooth adapter, do the following: 1. Press the Windows key or select the Windows Start button >
Settings > Devices > Bluetooth & other devices, and click the toggle under Bluetooth to enable/disable it. 2. Click on Add Bluetooth or other device then select the device that you want to add. 3. Your computer will automatically start searching for devices, as well as make itself visible to other devices.

Using a Bluetooth connection - 27
4. Select the device you wish to pair from the list of discovered devices.
5. After pairing, if there is a code displaying on the screen, enter that code on the device to proceed the connection.
Note
Some devices using older versions of the Bluetooth technology require both devices to enter a PIN. In the case of one of the devices not having any inputs (as in a headset), the passcode is hardcoded into the device (usually "0000" or "1234"). Consult your device's user manual for more information.
You can also enter the Bluetooth settings by selecting the Notifications icon in the lower right-hand corner of the screen to open the Notifications pane. From here, you can enable or disable Bluetooth or right-click on Bluetooth > Go to Settings to enter the Bluetooth settings.

28 - Connecting to the Internet
CONNECTING TO THE INTERNET
This chapter includes general information on types of connections, and getting connected to the internet. For detailed information, please refer to Network connections on page 73. Your computer's built-in network features make it easy for you to connect your computer to the internet. First though, in order to connect to the internet from home, you'll need to sign up for internet services from an ISP (Internet Service Provider) -- usually a phone or cable company -- that will have to go to your home or office to set up internet service. The ISP will install a small box, a router or modem, that will allow you to connect to the internet.
Connecting to a wireless network
Connecting to a wireless LAN
A wireless LAN (or WLAN) is a wireless local area network, which can link two or more computers without using wires. Once connected to WLAN, you can access the internet. You can also share files, other devices, and even your internet connection itself. Your computer's wireless connection is turned on by default and Windows will detect and display a list of available networks during setup. Select your network and enter the password if required.
Warning
Using wireless devices while flying in aircraft may be prohibited. All wireless devices must be switched off before boarding an aircraft and during take-off, as they may be dangerous to the operation of the aircraft, disrupt communications, and even be illegal. You may turn on your computer's wireless devices only when informed that it is safe to do so by the cabin crew.
ConceptD notebook computers feature a Flight mode hotkey that turns the network connection on or off. You can use the network management options to turn your wireless network on/off or control what is shared over the network.

Connecting to the Internet - 29
To connect to a wireless network, please follow the steps below. 1. Ensure you have a wireless router/access point and current internet
connection through the ISP of your choice. Make a note of the wireless network's name and password (if necessary). If you are trying to connect to a public network (such as at a coffeeshop), make sure you have the wireless network's name.
Note
Please refer to your ISP or router documentation for details on connecting to the internet.
2. Click Network icon in the notification area.
Note
If Wi-Fi is turned off, please click Wi-Fi tile to turn it on.
3. You will see a list of available wireless networks. Select the one you wish to use.

30 - Connecting to the Internet
4. Once you select a wireless network, select Connect.
5. If required, enter the network's password.

Connecting to the Internet - 31
Connecting with a cable
Built-in network feature
If your computer has a network port, plug one end of a network cable into the network port on your computer, and the other end into a port on your router (refer to the image below.) Then, you'll be ready to get online.
Connecting to a cellular network
If your computer has a SIM slot, you can connect to the internet using a cellular phone network. To do this, you must have a compatible SIM card and a data contract with your cellular provider. Contact your cellular provider for more information on connecting to the internet using a cellular network.

32 - ConceptD Palette

CONCEPTD PALETTE

ConceptD Palette provides the simple design to change color configuration. It also allows you to monitor system performance, change audio mode and launch your apps quickly.
The ConceptD Palette main screen
The main screen gives you an overview of current system status. You can also switch color profile and sound effect easily.

Color profile setting
Select Color Profile to switch the setting for the screen. The default setting is Adobe® RGB. You can choose Adobe® RGB or Native.

ConceptD Palette - 33
TrueHarmony setting
To get a different audio experience, you can select TrueHarmony to adjust the audio mode.
Monitoring
From Monitoring page, click CPU, GPU or System tab to check processor and system loading.

34 - ConceptD Palette
Split Screen
Use Split Screen to divide the screen into different pre-defined areas without manually adjusting the size and the position of the windows.
App Center
App Center is a great way to quickly launch the installed app in your computer. Select icon to add your favorite apps into the app center.

ConceptD Palette - 35
Advanced Settings
Select the Settings to change settings for your system. You can change temperature units or turn keyboard backlight off automatically if no action within 30 seconds.
Enable PrtScn Key to launch Screen Snip tool
Select Screen Snip Settings to change the hotkey of Screen snip.

36 - ConceptD Palette
Scroll down to Print Screen shortcut section in Keyboard settings. Turn on the option under Print Screen shortcut. Then, you can press PrtScn key to capture the screen in different types.
Manage the copied items in Clipboard
Before you start to view the clipboard history, enable the option Turn on the Clipboard function to manage the copied items or click Clipboard Settings to turn on the option under Clipboard history section.

ConceptD Palette - 37
Press Windows key + V to view the clipboard history. You can find all items, text, or images you copied and click the item you want to paste.

38 - ConceptD Palette
Set color profile on ConceptD monitor
When the laptop detects the ConceptD monitor, you can sync or change the color profile on the monitor from your laptop.
Sync up the color profile
When the color profile settings are different between ConceptD monitor and laptop, you can select Apply from the system notification to sync the color profile on the monitor.
Change the color profile
You can change the color profile on the ConceptD monitor from ConceptD Palette. (Up to 3 external devices)

Select the screen number to switch the device.

ConceptD Palette - 39

Select the device to adjust the color profile.

# Icon Color

Description

Amber Selected device.

Gray

Unselected device.

Red

The color profile is different from main device.

40 - Bluelight Shield

BLUELIGHT SHIELD

The Bluelight Shield can be enabled to reduce blue-light emissions from the screen to protect your eyes.
To configure the Bluelight Shield, search for 'Quick Access' in the Start Menu. From here you can toggle Bluelight Shield on or off, and you can choose from four different modes to fit your needs:

No. Item

Low Reduction

Medium Reduction

High Reduction

Long Hour Mode

Description
Reduces blue light emission from the LED backlit screen by 10% to 25% for basic protection.
Reduces blue light emission from the LED backlit screen by 26% to 45% to protect your eyes.
Reduces blue light emission from the LED backlit screen by 46% to 65% for maximum protection.
Professionally tuned to reduce eye strain over an extended period of time.

Note
Specifications vary depending on model or Operating System.

Keeping your computer and data safe...
In this section you will find:
· How to secure your computer · Setting passwords · What you need to prepare when you're traveling · How to get the most out of your battery

42 - Securing your computer
SECURING YOUR COMPUTER
Your computer is a valuable investment that you need to take care of. Learn how to protect and take care of your computer. Security features include hardware and software locks -- a security notch and passwords.
Using a computer security lock
The computer comes with a computer security slot for a security lock. Wrap a computer security lock cable around an immovable object such as a table or handle of a locked drawer. Insert the lock into the notch and turn the key to secure the lock. Some keyless models are also available.
Using passwords
Passwords protect your computer from unauthorized access. Setting these passwords creates several different levels of protection for your computer and data: · Supervisor Password prevents unauthorized entry into the BIOS
utility. Once set, you must enter this password to gain access to the BIOS utility. See Setting passwords on page 44. · User Password secures your computer against unauthorized use. Combine the use of this password with password checkpoints on boot-up and resume from Hibernation (if available) for maximum security. · Password on Boot secures your computer against unauthorized use. Combine the use of this password with password checkpoints on boot-up and resume from Hibernation (if available) for maximum security.
Important
Do not forget your Supervisor Password! If you forget your password, please get in touch with your dealer or an authorized service center.

Securing your computer - 43
Entering passwords
When a password is set, a password prompt appears in the center of the display screen. · When the Supervisor Password is set, a prompt appears when you
enter the BIOS utility. · Type the Supervisor Password and press Enter to access the BIOS
utility. If you enter the password incorrectly, a warning message appears. Try again and press Enter. · When the User Password is set and the password on boot parameter is enabled, a prompt appears at boot-up. · Type the User Password and press Enter to use the computer. If you enter the password incorrectly, a warning message appears. Try again and press Enter.
Important
You have three chances to enter a password. If you fail to enter the password correctly after three tries, the system halts. Press and hold the power button for four seconds to shut down the computer. Then turn on the computer again, and try again.

44 - BIOS utility

BIOS UTILITY

The BIOS utility is a hardware configuration program built into your computer's BIOS. Your computer is already properly configured and optimized, and you do not normally need to run this utility. However, if you encounter configuration problems, you may need to run it. To activate the BIOS utility, press F2 while the computer logo is being displayed.
Boot sequence
To set the boot sequence in the BIOS utility, activate the BIOS utility, then select Boot from the categories listed on the top of the screen.
Setting passwords
To set a password on boot, activate the BIOS utility, then select Security from the categories listed on the top of the screen. Find Set Supervisor Password and enter a password to enable this feature. Once you have entered a password for this feature, you may then enable/disable Password on Boot. Remember to select F10 to properly save and exit the BIOS utility when you are done making changes.

Power management - 45
POWER MANAGEMENT
This computer has a built-in power management unit that monitors system activity. System activity refers to any activity involving one or more of the following devices: keyboard, mouse, hard disk, peripherals connected to the computer, and video memory. If no activity is detected for a period of time, the computer stops some or all of these devices in order to conserve energy.
Saving power
Disable Fast startup
Your computer uses Fast startup to start quickly, but also uses a small amount of power to check for signals to start. These checks will slowly drain your computer's battery. If you prefer to reduce your computer's power requirements and environmental impact, turn off Fast startup:
Note
If Fast startup is off, your computer will take longer to start from Sleep. Your computer will also not start if it receives an instruction to start over a network (Wake on LAN).
1. Press the Windows key or select the Windows Start button then select Settings > System > Power & sleep.
2. Select Additional power settings. 3. Select Choose what the power buttons do.

46 - Power management
4. Select Change settings that are currently unavailable.
5. Scroll down and disable Turn on fast startup. 6. Select Save changes.

BATTERY PACK

Battery pack - 47

The computer uses an embedded Lithium battery that gives you long use between charges.
Battery characteristics
The battery is recharged whenever you connect the computer to the AC adapter. Your computer supports charge-in-use, enabling you to recharge the battery while you continue to operate the computer. However, recharging with the computer turned off significantly reduces charge time. The battery will come in handy when you travel or during a power failure.
Charging the battery
Plug the AC adapter into the computer, and connect to a mains power outlet.
Note
You are advised to charge the battery before retiring for the day. Charging the battery overnight before traveling enables you to start the next day with a fully charged battery.
Conditioning a new battery pack
Before you use a battery pack for the first time, there is a conditioning process that you should follow: 1. Connect the AC adapter and fully charge the battery. 2. Turn on the computer and complete setting up the operating system. 3. Disconnect the AC adapter. 4. Operate the computer using battery power. 5. Fully deplete the battery until the battery-low warning appears. 6. Reconnect the AC adapter and fully charge the battery again. Follow these steps again until the battery has been charged and discharged three times.

48 - Battery pack
Use this conditioning process for all new batteries, or if a battery hasn't been used for a long time.
Warning
Do not expose battery packs to temperatures below 0° C (32° F) or above 45° C (113° F). Extreme temperatures may adversely affect the battery pack.
The battery conditioning process ensures your battery accepts the maximum possible charge. Failure to follow this procedure will prevent you from obtaining the maximum battery charge, and will also shorten the effective lifespan of the battery. In addition, the useful lifespan of the battery is adversely affected by the following usage patterns: · Using the computer on constant AC power. · Not discharging and recharging the battery to its extremes, as
described above. · Frequent use; the more you use the battery, the faster it will reach
the end of its effective life. An embedded battery has a life span of more than 1,000 charge/discharge cycles.
Optimizing battery life
Optimizing battery life helps you get the most out of battery operation, prolonging the charge/recharge cycle and improving recharging efficiency. You are advised to follow the suggestions set out below: · Use AC power whenever possible, reserving battery for mobile use. · Remove accessories that are not being used (e.g. a USB disk
drive), as they can continue to draw power. · Store your PC in a cool, dry place. The recommended temperature
is 10° C (50° F) to 30° C (86° F). Higher temperatures cause the battery to self-discharge faster. · Excessive recharging decreases the battery life. · Look after your AC adapter and battery.

Battery pack - 49
Checking the battery level
The power meter indicates the current battery level. Rest the cursor over the battery/power icon on the taskbar to see the battery's present charge level.
Battery-low warning
When using battery power pay attention to the power meter.

Important
Connect the AC adapter as soon as possible after the battery-low warning appears. Data may be lost if the battery is allowed to become fully depleted and the computer shuts down.

When the battery-low warning appears, the recommended course of action depends on your situation:

Situation
The AC adapter and a power outlet are available.
The AC adapter or a power outlet is unavailable.

Recommended Action
1. Plug the AC adapter into the computer, and then connect to the main power supply. 2. Save all necessary files. 3. Resume work. Turn off the computer if you want to recharge the battery rapidly.
1. Save all necessary files. 2. Close all applications. 3. Turn off the computer.

50 - Traveling with your computer
TRAVELING WITH YOUR COMPUTER
This section gives you tips and hints to consider when moving around or traveling with your computer.
Disconnecting from the desktop
Follow these steps to disconnect your computer from external accessories: 1. Save any open files. 2. Remove discs from optical drive. 3. Shut down the computer or put it into Sleep or Hibernate mode. 4. Close the display cover. 5. Disconnect the cord from the AC adapter. 6. Disconnect the keyboard, pointing device, printer, external monitor
and other external devices. 7. Disconnect the Kensington / Noble lock if you are using one to
secure the computer.
Moving around
When you are just moving within short distances, for example, from your office desk to a meeting room.
Preparing the computer
Before moving the computer, close and latch the display cover to place it in Sleep mode. You can now safely take the computer anywhere you go within the building. To wake the computer from Sleep mode, open the display and, if necessary, press and release the power button. If you are taking the computer to a client's office or a different building, you may choose to shut down the computer: Press the Windows key, click Power then select Shut Down Or:

Traveling with your computer - 51
You can put the computer in Sleep mode by pressing the Sleep hotkey or by closing the display. When you are ready to use the computer again, open the display and, if necessary, press and release the power button.
Note
The computer may enter Hibernation or Deep Sleep mode after being in Sleep mode for a period of time.
What to bring to meetings
If your meeting is relatively short, you probably do not need to bring anything with you other than your computer. If your meeting will be longer, or if your battery is not fully charged, you may want to bring the AC adapter with you to plug in your computer in the meeting room. If the meeting room does not have an electrical outlet, reduce the drain on the battery by putting the computer in Sleep mode. Press the Sleep hotkey or close the display cover whenever you are not actively using the computer.
Taking the computer home
When you are moving from your office to your home or vice versa.
Preparing the computer
After disconnecting the computer from your desktop, follow these steps to prepare the computer for the trip home: · Check that you have removed all media and compact discs from the
drive(s). Failure to remove the media can damage the drive head. · Pack the computer in a protective case that can prevent the
computer from sliding around and cushion it if it should fall.
Warning
Avoid packing items next to the top cover of the computer. Pressure against the top cover can damage the screen.

52 - Traveling with your computer
What to take with you
Unless you have some items at home, take the following items with you: · AC adapter and power cord. · The printed Setup Guide.
Special considerations
Follow these guidelines to protect your computer while traveling to and from work: · Minimize the effects of temperature changes by keeping the
computer with you. · If you need to stop for an extended period of time and cannot carry
the computer with you, leave the computer in the trunk of the car to avoid exposing the computer to excessive heat. · Changes in temperature and humidity can cause condensation. Allow the computer to return to room temperature, and inspect the screen for condensation before turning on the computer. If the temperature change is greater than 10° C (18° F), allow the computer to come to room temperature slowly. If possible, leave the computer for 30 minutes in an environment with a temperature between outside and room temperature.
Setting up a home office
If you frequently work on your computer at home, you may want to purchase a second AC adapter for use at home. With a second AC adapter, you can avoid carrying the extra weight to and from home. If you use your computer at home for significant periods of time, you might also want to add an external keyboard, monitor or mouse.

Traveling with the computer

Traveling with your computer - 53

Important
Check with your airline for any special requirements for travelling with Lithium batteries.
When you are moving within a larger distance, for instance, from your office building to a client's office building or traveling locally.
Preparing the computer
Prepare the computer as if you were taking it home. Make sure that the battery in the computer is charged. Airport security may require you to turn on your computer when carrying it into the gate area.
What to take with you
Take the following items with you: · AC adapter · Additional printer driver files if you plan to use another printer
Special considerations
In addition to the guidelines for taking the computer home, follow these guidelines to protect your computer while traveling: · Always take the computer as carry-on luggage. · If possible, have the computer inspected by hand. Airport security X-
ray machines are safe, but do not put the computer through a metal detector.
Traveling internationally

Important
Check with your airline for any special requirements for travelling with Lithium batteries.
When you are moving from country to country.

54 - Traveling with your computer
Preparing the computer
Prepare the computer as you would normally prepare it for traveling.
What to bring with you
Bring the following items with you: · AC adapter. · Power cords that are appropriate for your destination(s). · Additional printer driver files if you plan to use another printer. · Proof of purchase, in case you need to show it to customs officials. · International Travelers Warranty passport.
Special considerations
Follow the same special considerations as when traveling with the computer. In addition, these tips are useful when traveling internationally: · When traveling in another country, check that the local AC voltage
and the AC adapter power cord specifications are compatible. If not, purchase a power cord that is compatible with the local AC voltage. Do not use converter kits sold for appliances to power the computer. · If you are using the modem, check if the modem and connector are compatible with the telecommunications system of the country you are traveling in.

Ports and connectors...
In this section you will find:
· Information on the ports and connectors fitted to your computer

56 - Universal Serial Bus (USB)
UNIVERSAL SERIAL BUS (USB)
The USB port is a high-speed port which allows you to connect USB peripherals, such as a mouse, an external keyboard, additional storage (external hard disks), or any other compatible device.
Note
Two USB standards are currently available on ConceptD computers: USB 2.0 (High-speed USB) and USB 3.1 Gen 1 (SuperSpeed USB). USB 2.0 ports on ConceptD computers have a black tongue in the port, while USB 3.1 Gen 1 ports have a blue tongue. For best performance, USB 3.1 Gen 1 devices should always be plugged into USB 3.1 Gen 1 ports. Consult your device's documentation to see which standard it supports.
You can also charge devices such as tablets, smartphones, or other devices through a USB port. Some USB 3.1 Gen 1 ports support charging devices when the computer is in Hibernate or turned off. Additionally, you can use a USB hub to connect multiple devices to a single USB port.
Important
When removing a USB storage device, you should right-click on the USB icon in the Windows task bar and select "Eject <device>" to tell the operating system to stop using the device before removing it. Failure to do this may result in data loss or damage to your peripheral.

USB TYPE-C PORT

USB Type-C port - 57

A USB Type-C port is a connector that allows you to easily connect USB Type-C peripherals, such as additional storage (e.g. an external drive), or any other compatible device.
The Type-C port is reversable; connectors may be inserted with either side up.

Note
On ConceptD computers USB Type-C ports support up to USB 3.1 (SuperSpeed USB, 5 Gbps). Other USB devices with a USB Type-C connector are supported, but transfer speed may be reduced and certain functions will be disabled (such as Thunderbolt video support).
Important
When removing a USB storage device, you should right-click on the USB icon in the Windows task bar and select "Eject <device>" to tell the operating system to stop using the device before removing it. Failure to do this may result in data loss or damage to your peripheral.

58 - Video and audio connectors
VIDEO AND AUDIO CONNECTORS
Add an external monitor to your computer via a video port. The type of port available depends on your computer's configuration.
Connecting a monitor
1. Check that the computer is powered off and the monitor power switch is turned off.
2. Attach the video cable to the monitor port on the computer. 3. Connect the monitor power cable and plug it into a properly
grounded wall outlet. 4. Follow any setup instructions in the monitor's user's guide. 5. Turn on power to the monitor, then the computer. 6. The correct resolution and refresh rate should be detected
automatically. If necessary, change the display settings used by the computer.
Note
To access the display controls, right-click anywhere on the desktop and select Display settings.
Headphones and microphone
One or more 3.5 mm jacks on your computer allow you to connect audio devices. Use the headphone port to plug in stereo headphones or powered speakers; connecting an audio device to the headphone port disables the built-in speakers. Use the microphone port to connect an external microphone; connecting a microphone disables the built-in microphone.
Note
Some computers have a single "combo" port that allows you to use single-pin headsets with a built-in microphone. These headsets are most commonly used with smartphones.

HDMI

HDMI - 59

HDMI (High-Definition Multimedia Interface) is a high-quality, digital audio/video interface. HDMI allows you to connect any compatible digital audio/video source, such as your computer, a set-top box, DVD player, and audio/video receiver to any compatible digital audio and/or video monitor, such as a digital television (DTV) with a single cable.
The single cable keeps everything neat and tidy while ensuring easy connection and the best audio and visual quality.

Got a question?
In this section you will find:
· Frequently asked questions · Tips for using Windows 10 · Troubleshooting information · How to protect yourself while online · Where to find Acer service center contact information

Frequently asked questions - 61
FREQUENTLY ASKED QUESTIONS
The following is a list of possible situations that may arise during the use of your computer. Easy solutions are provided for each one.
I turned on the power, but the computer does not start or boot up.
Check if power is being supplied to the computer (if your computer has a power indicator, it will be off); if there is no power, check the following: · If you are using on the battery, it may be low and unable to power
the computer. Connect the AC adapter to recharge the battery pack. You may need to wait a few minutes before trying to turn your computer on again. · Make sure that the AC adapter is properly plugged into the computer and to the power outlet. If power is being supplied to the computer, check the following: · Do you have a USB storage device (USB drive, CD drive or smartphone) plugged into your computer? Unplug it and press Ctrl + Alt + Del to restart the system.
Nothing appears on the screen.
The computer's power management system automatically blanks the screen to save power. Press any key to turn the display back on. If pressing a key does not turn the display back on, three things might be the cause: · The brightness level might be too low. Use the Brightness up hotkey
to adjust the brightness level. · The display device might be set to an external monitor. Press the
display toggle hotkey to toggle the display back to the computer. · The computer may be in Sleep or Hibernate mode (if there is a
power LED, it will flash). Press and release the power button to resume.
No audio is heard from the computer.
Check the following:

62 - Frequently asked questions
· The volume may be muted. Look at the volume control (speaker) icon in the taskbar. If it is crossed-out, click the icon and drag the slider to the right to increase the volume.
· The volume level may be too low. Check the volume from the volume control (speaker) icon in the taskbar. You can also use the volume control hotkeys to adjust the volume.
· If headphones, earphones or external speakers are connected to the headphone jack on the computer, the internal speakers automatically turn off.
The keyboard does not respond.
Try attaching an external keyboard to a USB port on the computer. If it works, contact your dealer or an authorized service center as the internal keyboard cable may be loose.
The printer does not work.
· Make sure that the printer is connected to a power outlet and that it is turned on.
· Make sure that the printer cable is connected securely to a USB port and the corresponding port on the printer.
I want to restore my computer to its original settings.
Note
If your system is the multilingual version, the operating system and language you choose when you first turn on the system will be the only option for future recovery operations.
This recovery process helps you restore the C: drive with the original software content that is installed when you purchased your computer.
Warning
Your C: drive will be reformatted and all data will be erased. It is important to back up all data files before using this option.
Before performing a restore operation, please check the BIOS settings. 1. If there is a D2D Recovery setting in Main, make sure it is Enabled. 2. Exit the BIOS utility and save changes. The system will reboot.

Frequently asked questions - 63
Note
To access the BIOS utility, press F2 when you see the ConceptD logo during boot up.
For more information, see Restoring your computer on page 21.
Requesting service
International Travelers Warranty (ITW)
Your computer is backed by an International Travelers Warranty (ITW) that gives you security and peace of mind when traveling. An ITW passport came with your computer and contains all you need to know about the ITW program. A list of available, authorized service centers is in this handy booklet. Read this passport thoroughly. Always have your ITW passport on hand, especially when you travel, to receive the benefits from our support centers. Attach your proof-ofpurchase to the ITW passport. If the country you are traveling in does not have an Acer-authorized ITW service site, you can still get in contact with our offices worldwide. Please visit www.acer.com.
Before you call
Please have the following information available when you call Acer for online service, and please be at your computer when you call. With your support, we can reduce the amount of time a call takes and help solve your problems efficiently. If there are error messages or beeps reported by your computer, write them down as they appear on the screen (or the number and sequence in the case of beeps). You are required to provide the following information: Name: Address: Telephone number: Machine and model type: Serial number: Date of purchase:

Frequently ask
64 - Frequently asked questions
Tips and hints for using Windows 10
We know this is a new operating system that will take some getting used to, so we've created a few pointers to help you get started.
How do I get to Start?
Press the Windows key or select the Windows Start button on the lower left-hand corner of the screen. Selecting it will open Start where you can launch apps.
How do I see all of my apps?
Press the Windows key or select the Windows Start button to show a list of installed apps on the computer.
How do I turn off my computer?
Press the Windows key or select the Windows Start button and select the power icon > Shut down. You can also turn off the computer by right-clicking the Windows Start button > Shut down or sign out > Shut down.
Can I turn off notifications?
You can turn off notifications so that you can leave your computer running, but not be disturbed by notifications. Press the Windows key or select the Windows Start button and select Settings > System > Notifications & actions. From here you can enable/disable notifications for all of your apps or choose which apps to enable/disable.
How do I unlock my computer?
Press the space bar and select a user account icon to unlock the computer. If your account has a password set, you will need to enter the password to continue.

Frequently asked questions - 65
Can I personalize the Lock screen?
You can personalize the lock screen with a different image, to run a slideshow of images, or to show you quick status and notifications to suit your personal needs. To change the background, press the Windows key or select the Windows Start button and select Settings > Personalization > Lock screen. From here you can: · Select a background image for the lock screen · Turn the Slideshow on or off · Select lock screen apps.
How do I set up the lock screen slideshow?
1. Press the Windows key or select the Windows Start button and select Settings > Personalization.
2. Under Lock screen, select Slideshow. 3. Select Add a folder and open the folder you wish to use (your
Pictures folder will open by default). Select Choose this folder to add the folder to the lock screen slideshow. 4. Select a folder and select Remove to remove the folder from the lock screen slideshow. 5. Change the other settings to suit your needs.
How do I move tiles?
Select a tile and drag it to the place on Start that you want it to appear. Other tiles will be moved to accommodate the tile in its new location.
Can I arrange tiles in groups?
Yes, you can. Select an existing tile and drag the tile to arrange Start to your liking. Right-click on an app and select Pin to Start to create a new group on Start. From here, you can drag the tile to an existing group on Start. You can give the group(s) a name and arrange the tiles within the groups to suit your needs.
Can I make tiles bigger or smaller?
Yes, you can. Right-click on a tile and select Resize. Select a size from the menu that appears.

66 - Frequently asked questions
Can I change the screen resolution?
Yes, you can. Move your cursor to the lower left-hand corner of the screen and type 'Resolution' in the text box to display the results; select Change the resolution of the display. Alternatively, you can also right-click anywhere on the desktop and select Display settings > Display.
How do I set the alarm?
Your computer can act as an alarm clock. Type 'Alarms' to search for the Alarms & Clock app. 1. Select an alarm from the list, or select the + in the lower-right corner
to create a new alarm. 2. Enter the Alarm name. 3. Set the time by choosing the hour and minute. 4. Choose which days the alarm should go off. 5. Select the sound notification. 6. Select the snooze time. 7. Select the Save icon in the bottom right-hand corner to save the alarm. 8. Select On or Off to activate or deactivate the alarm.
Hour Minutes

Save

Delete

Frequently asked questions - 67
Note
The alarm will only sound if your computer is awake at the set time.
Where are my apps?
Move your cursor to the lower left-hand corner of the screen and click search box, start typing the name of the app you would like to open.
How do I make an app appear on Start?
If you're in all apps list and you want to make an app appear on Start, right-click an app and select Pin to Start.
How do I remove a tile from Start?
Right-click a tile to select it and select Unpin from Start to remove the tile from Start.
How do I make an app appear on my taskbar?
If you're in all apps list and you want to make an app appear on the taskbar, right-click an app or tile and select More > Pin to taskbar.
How do I install apps?
You will need to have a Microsoft ID to purchase and download apps from Microsoft Store.
I can't find apps like Notepad and Paint! Where are they?
Move your cursor to the lower left-hand corner of the screen and click search box. Type the name of the app you would like to open. Alternatively, open all apps list and scroll to 'Windows Accessories' to see the list of legacy programs.
What is a Microsoft ID (account)?
A Microsoft account is an email address and password that you use to sign in to Windows. You can use any email address, but it is best if you choose the one you already use to communicate with friends and sign in to your favorite websites. When you sign in to your PC with a

68 - Frequently asked questions
Microsoft account, you'll connect your PC to the people, files, and devices you care about.
Do I need one?
You do not need a Microsoft ID to use Windows 10, but it makes life easier because you can sync data across different machines you sign in to using a Microsoft ID.
How do I get one?
If you've already installed Windows 10 and didn't sign in with a Microsoft account or you don't have a Microsoft account and want to get one, press the Windows key or select the Windows Start button > Settings > Accounts > Sign in with a Microsoft account instead, and follow the onscreen instructions.
How do I check for Windows updates?
Press the Windows key or select the Windows Start button > Settings > Update & Security > Windows Update. Select Advanced options to configure the settings.
Where can I get more information?
For more information please visit the following pages: · Windows 10 information: www.microsoft.com · Support FAQs: support.acer.com

Frequently asked questions

Frequently asked questions - 69

Troubleshooting
This chapter shows you how to deal with common system problems. Read it before calling a technician if a problem occurs. Solutions to more serious problems require opening up the computer. Do not attempt to open the computer yourself; contact your dealer or authorized service center for assistance.

Troubleshooting tips

This computer incorporates an advanced design that delivers onscreen error message reports to help you solve problems.
If the system reports an error message or an error symptom occurs, see "Error messages" below. If the problem cannot be resolved, contact your dealer.

Error messages

If you receive an error message, note the message and take the corrective action. The following table lists the error messages in alphabetical order together with the recommended course of action.

Error messages CMOS battery bad CMOS checksum error Disk boot failure
Equipment configuration error
Hard disk 0 error Hard disk 0 extended type error

Corrective action
Contact your dealer or an authorized service center.
Contact your dealer or an authorized service center.
Insert a system (bootable) disk, then press Enter to reboot.
Press F2 (during POST) to enter the BIOS utility, then press Exit in the BIOS utility to reboot.
Contact your dealer or an authorized service center.
Contact your dealer or an authorized service center.

70 - Frequently asked questions

Error messages Corrective action

I/O parity error

Contact your dealer or an authorized service center.

Keyboard error or no Contact your dealer or an authorized service keyboard connected center.

Keyboard interface Contact your dealer or an authorized service

error

center.

Memory size mismatch

Press F2 (during POST) to enter the BIOS utility, then press Exit in the BIOS utility to reboot.

If you still encounter problems after going through the corrective measures, please contact your dealer or an authorized service center for assistance.

Internet and online security - 71
INTERNET AND ONLINE SECURITY
First steps on the net
Protecting your computer
It is vital to protect your computer from viruses and attacks over the internet (see Internet security software on page 75). A comprehensive internet security program is offered when you first start your computer. You should activate this protection as soon as possible, certainly before you connect to the internet.
Choose an Internet Service Provider
Using the internet has become a natural part of daily computing. Just a few simple steps can connect you to a vast collection of knowledge and communication tools. To accomplish these steps you should first select an Internet Service Provider (ISP), which supplies the connection between your computer and the internet. You should research the ISPs available in your region, not forgetting to talk to friends and family about their experiences or to check reviews and consumer reports. The ISP you select will provide instructions on how to connect to the internet (you may need additional software or a special `box' that connects to your phone line).
Connection types
Depending on your computer model, your location and your communication needs, you have several ways to connect to the internet.
Dial-up
Some computers include a telephone dial-up (`modem') connector. This allows you to connect to the internet using your telephone line. With a dial-up connection, you cannot use the modem and the telephone simultaneously on a single phone line. This type of connection is recommended only if you have limited use of the

72 - Internet and online security
internet as the connection speed is low and connection time is typically charged per hour.
DSL (e.g. ADSL)
DSL (Digital Subscriber Line) is an `always-on' connection that runs over the phone line. As DSL and phone do not use the same frequencies, you can use your telephone at the same time you are connected to the internet (this requires a `micro-filter' on each telephone socket to avoid interference). To be eligible for DSL, you must be located near an DSL-equipped phone exchange (service is sometimes unavailable in rural areas). Connection speeds vary depending on your location, but DSL generally provides very fast and reliable internet connection. As the connection is always-on, it is generally charged at fixed monthly rates.
Note
A DSL connection requires an appropriate modem. A modem is usually provided by the ISP when you register. Many of these modems include an `router' that provides network and Wi-Fi access.
Cable
A cable connection provides fast and always-on internet service via a cable television line. This service is generally available in large cities. You can use your telephone and watch cable TV at the same time you are connected to the internet.
Cellular
A cellular connection allows you to use cellular networks (such as those used by a mobile phone) to connect to the internet while away from home. The socket for a SIM card may be built in to your computer, or may require an external device, such as a USB modem or even an appropriately equipped mobile phone.
Note
If your computer includes a SIM card slot, you require a compatible SIM card and a contract with a cellular provider. Before using the cellular features, check with your service provider to see if any additional charges will be incurred, especially roaming charges.

Internet and online security - 73
Network connections
A LAN (Local Area Network) is a group of computers (for example, within an office building or home) that share a common communications line and resources. When you set up a network, you can share files, peripheral devices (such as a printer) and an internet connection. You can set up a LAN using wired technologies (such as Ethernet) or wireless technologies (such as Wi-Fi or Bluetooth).
Wireless networks
A wireless LAN or WLAN is a wireless local area network, which may link two or more computers without using wires. Setting up a wireless network is easy and allows you to share files, peripheral devices and an internet connection.
What are benefits of a wireless network?
Mobility
Wireless LAN systems allow you and other users of your home network to share access to files and devices connected to the network, for example a printer or scanner. Also you can share an internet connection with other computers in your home.
Installation speed and simplicity
Installing a wireless LAN system can be fast and easy and eliminates the need to pull cables through walls and ceilings.
Components of a wireless LAN
To set up your Wireless network at home you need to have the following:
Access point (router)
Access points (routers) are two-way transceivers that broadcast data into the surrounding environment. Access points act as a mediator between wired and wireless network. Most routers have a built-in DSL modem that will allow you access to a high speed DSL internet connection. The ISP (Internet Service Provider) you have chosen normally supplies a modem/router with the subscription to their services. Read carefully the documentation supplied with your Access

74 - Internet and online security
point/router for detailed setup instructions.
Network cable (RJ45)
A network cable (also called RJ45 cable) is used to connect the host computer to the access point (see illustration below); this type of cable may also be used to connect peripheral devices to the access point.
Wireless adapter
Most computers feature a wireless module and Wi-Fi button that turns the network connection on or off. You may also turn your wireless network on or off, or control what is shared over the network with the network management options.
Warning
Using wireless devices while flying in aircraft may be prohibited. Switch off all devices before boarding an aircraft; they may be dangerous to the operation of the aircraft, disrupt communications, and even be illegal. After take off, ask the cabin crew if you may enable Wi-Fi.
Surf the Net!
To surf the internet, you need a program called an internet browser. Microsoft Edge provides an easy and secure web browsing experience. As soon as you have your internet access installed and you are connected, from the Start Menu, click the Microsoft Edge tile or the icon located in the taskbar and take your internet experience to a new level!
Acer website
To get you started why not visit our website, www.acer.com. Acer is dedicated to provide you with on-going personalized support. Check out our Support section to get help tailored to your needs. www.acer.com is your portal to a world of online activities and services: visit us regularly for the latest information and downloads!

Internet and online security - 75
Internet security software
To help you stay ahead of cybercriminals, Acer has partnered with Norton to offer you security for all your devices.
Select Acer computers include protection by Norton Security
Norton Security is pre-installed on select Acer computers, protecting your identity and financial data from viruses, spyware, malware and other online threats. Learn more about how to stay safe online and how to stay protected after your introductory subscription ends.
Note
Specifications vary depending on model or Operating System.
Staying ahead of cybercriminals
Stay ahead of hackers and cybercriminals by understanding the tactics they use to access your private data.
Ensure your software is up to date
Cybercriminals rely heavily upon software or platform vulnerabilities, as they are the easiest way to sneak malware into a user's device unnoticed, sometimes with little action on the user's part. Immediately after a software manufacturer announces an update, hackers are ready with malware that can breach holes in the software that would have been patched if the update was installed. How to stay safe: Perform any and all software updates as soon as they are available.
Keep a lookout for fake or phishing emails
Beware of emails that appear to be from a friend or business colleague that you know but seem a little odd. Maybe they didn't capitalize your name or there are misspellings. The email might be from cybercriminals who are trying to fool you into sending them your credit card number, social security number, or logging into a fake bank website that looks like yours but really isn't. How to stay safe: Use a strong antispam filter. If an email looks strange, don't click on anything and delete it immediately. Instead

76 - Internet and online security
manually launch a browser and type in your bank's website address and log-in yourself.
Don't be fooled if someone calls your phone
A tech support scam is a form of online fraud where people call you on the phone saying they're Technical Support from a trusted company like Norton or Microsoft and that you have a virus. The main motive behind these scams is to extort money from the victim. Cybercriminals can also install malware such as keylogging software or backdoor Trojans in order to gain access to personal information.
How to stay safe: Don't fall for phone calls that tell you your software or computer isn't working. Never give your personal information like social security or credit card numbers to someone that you don't know over the phone.
Common threats cybercriminals use
Now you know a few very common ways cybercriminals try to sneak onto your device or trick you into providing private information to them directly. Here are a few of the types of malware they like to deploy once they've got into a device and what to do if you're ever infected.
Ransomware
A form of malware that will encrypt personal data files on your computer and attached devices. Encryption converts files into another format, that can only be opened with a specific decryption key. Once the ransomware installs itself, it will display a warning message that the computer is now locked. The user is given a specific amount of money to pay as a "fine" and a timeframe in which to pay. Even if paid, the criminal might choose to not unencrypt the files anyway!
What to do if you're infected: Avoid getting infected in the first place by staying protected with internet security software like Norton Security. Also, perform regular backups of all your data either online or to a separate external hard drive that is only attached to your computer while performing the backup. Ransomware has been known to lock access to external hard drives attached to the computer.
If you are infected with ransomware, think twice before you pay the ransom. There is no guarantee the cybercriminal will unlock your files and you'll be funding them to prey upon another innocent victim.

Internet and online security - 77
Botnets
A botnet is a string of infected, connected computers coordinated together to perform a task. Botnets gain access to your machine through some piece of malicious coding. Once the software is downloaded, the botnet will now contact its master computer and let it know that everything is ready to go. Now your computer, phone, tablet, or IoT device is entirely under the control of the person who created the botnet. Most people who are infected with botnets aren't even aware that their computer's security has become compromised!
What to do if you're infected: If you're infected you probably don't realize it as bots are notoriously quiet. Your Internet Service Provider might send you a notification alerting you that they found a threat on your network and that you need to remove the bot. If you have a bot, use internet security software like Norton Security to scan all of your devices.
Viruses/Malware
"Virus" is the commonplace word for all malicious software programs for years now; however, a virus is just one type of malicious threat. A virus is classified as a self-replicating piece of malicious code that travels by inserting itself into files or programs.
What to do if you're infected: Take steps to avoid infection by staying protected with internet security software like Norton Security. If you subscribed to Norton Security and think you may have a virus, contact Norton's on-call technicians to help eliminate the virus.
Take special precautions when using public Wi-Fi
Public Wi-Fi is available just about everywhere, from the local coffee shop to the hotels and airports you visit while traveling. While public Wi-Fi has made our lives a little easier, it also poses security risks to the personal information available on our laptops and smartphones. A virtual private network (VPN) gives you online privacy and anonymity by creating a private network from a public internet connection. VPNs mask your internet protocol (IP) address so your online actions are virtually untraceable as well as secure. One of the biggest security risks on public Wi-Fi are man-in-the-middle attacks (MITM). These attacks are akin to eavesdropping. Data is sent from point A (computer) to point B (server/website), and an attacker can get in-

78 - Internet and online security
between these transmissions. They then set up tools programmed to "listen in" on transmissions, intercept data that is specifically targeted as valuable, and capture the data, such as your login credentials and passwords. Use a virtual private network (VPN) to ensure your privacy and anonymity are protected when you use public Wi-Fi. VPN services can encrypt all the data that you send and receive while using a public Wi-Fi hotspot, securing your information from hackers and other users of the same connection.
For more tips on how to stay safe
Good security habits can reduce your exposure to online crime. By adopting a few basic behaviors, you can make big strides in reducing cybercrime risk: · Protect your accounts with strong, unique passwords that use a
combination of at least 10 uppercase and lowercase letters, symbols and numbers. · Don't click on random links or open unsolicited messages and attachments-particularly from people you don't know. · Don't access any personal information or social media accounts over unprotected Wi-Fi networks. · Use security software on your devices to help protect yourself from the latest threats.
Protect your computer with Windows security tools
Windows provides a variety of protection applications.
Windows Updates
If you have an active internet connection, Windows can check for important updates for your computer and install them automatically. These updates include security patches and program updates that can improve your computing experience and help protect your computer against new viruses and attacks.
How do I know when my computer is at risk?
If the Action Center reports an alert, or if your computer behaves erratically, crashes unexpectedly or if some of your programs do not work correctly, your computer may be infected by malicious software.

Internet and online security - 79
However, do not blame every computer problem on a virus! If you suspect your computer is infected, the first thing to do is update, if you have not already done so, and run your antivirus and anti-spyware software.

References

Acrobat Distiller 11.0 (Windows)