PocketGuide SHARKTOOTH CANADA

User Manual SHARKTOOTH PRIME EVO

Midland Europe srl SPEAK Bluetooth Handset K6M-SPEAK K6MSPEAK speak

download (pdf)

SPEAK Bluetooth Handset by Midland Europe srl

User Guide for SHARK models including: Sharktooth Prime EVO Universal Plug and Play Intercom System, Sharktooth Prime EVO, Universal Plug and Play Intercom System, Plug and Play Intercom System, Play Intercom System, Intercom System

PDF Viewing Options

Not Your Device? Search For Manuals or Datasheets below:


File Info : application/pdf, 2 Pages, 1.23MB

Document DEVICE REPORTSPEAK-Users-Manual-Midland-Europe-srl-k6m-speak-ex-1-16
UNIVERSAL PLUG&PLAY INTERCOM SYSTEM
EVO

Speakers

DESCRIPTION - LEGENDA

POCKET GUIDE

- Button + Button

USB-C recharge plug

Boom microphone

Button-/Button+ OPERATION X" Press X sec. xX Press X times

AUDIO FEEDBACK
Sound alert VISUAL FEEDBACK
Blue led blinking
Red led blinking

Red/blue led blinking Purple led
Steady blue led Steady red led

POWER ON
Press 3 sec. 3"
Led Blinking "Power on"
Battery status

PAIRING TO PHONE/GPS Status: power off

4"
CABERG

Press 4 sec.
Led blinks alternately Searching Bluetooth device on your phone.
If needed, enter PIN code (0000). Four led blinkings
"Pairing successful"
"Device connected"

POWER OFF
Press 3 sec. 3"
Led Blinking
"Power off"

PAIRING ANOTHER SHARKTOOTH PRIME
Status: Both units powered on

Press 5 sec.

5"

on both devices

"Pairing"
Led blinks alternately on both devices
Three led blinkings on both devices
"Pairing successful"

PAIRING TO A DIFFERENT MODEL/BRAND UNIT
Status: Both units powered on

5" Press 5 sec.

Led blinks alternately

Follow the "phone" pairing procedure

RESET ALL PAIRINGS Status: power off
Press 7 sec. 7"
Steady led for 3 sec.
"Beep"

"Pairing" Both units stop flashing

VOICE CALL
Status: unit on and connected to a phone

"Pairing successful"
OPEN/CLOSE INTERCOM Status: units on and paired
Press once x1
"Beep" Led blinks: audio active

Press twice x2
Voice assistant (Google assistant, Siri)

Press twice

x2

to end the call

Note: Double click on + Button -> Redial.

ANSWER A CALL Status: phone rings

Press once

x1

to answer a call

Press once

x1

to end a call

Press 3 sec.

3"

to reject a call

Note: if the automatic reply is activated, after 8 seconds the call automatically starts.

VOLUME ADJUSTMENT
Status: while listening to an audio source
(intercom, music, phone call...)

Keep pressed to increase the volume

Keep pressed to decrease the volume

Frequency Max power

MUSIC Status: unit on and connected to
the phone
Select a music APP from the phone

x1
x2 x2

Press once Play/Pause
Blinking
Press twice Song forward
Press twice Song backward

CHANGE LANGUAGE Status: unit on

Keep pressed for more

+7"

than 7 seconds

"Battery status" in the various languages. Release + button to
select the desired one.

2.4GHz 2.5mW

SHARK S.A. Z.A.C. de la Valentine 110, route de La Valentine 13396 MARSEILLE Cedex 11 - FRANCE Tél. : +33 (0)4 91 18 23 23 Fax : +33 (0)4 91 35 29 23 e-mail : [email protected] Read the instructions carefully before installation and use.

Produced or imported by: MIDLAND EUROPE srl Via R. Sevardi 7 - 42124 Reggio Emilia - Ital
Distributed in Canada by: GAMMA POWERSPORT 100 HUNTER VALLEY RD L3V0Y7 ORILLIA (ON)

To download the complete user manual please visit www.shark-helmets.com

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which
the receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help
Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions:
(1) this device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause
undesired operation. This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada's licence-exempt RSS(s). Operation is subject to the following two conditions: (1) This device may not cause interference. (2) This device must accept any interference, including interference that may cause undesired operation of the device.
L'émetteur/récepteur exempt de licence contenu dans le présent appareil est conforme aux CNR d'Innovation, Sciences et Développement économique Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes : (1) L' appareil ne doit pas produire de brouillage; (2) L' appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d' en compromettre le fonctionnement.



References

Related FCC IDs:

Search Any Device: