FI2419LB 黑色图说明书

wangwenwei

user manual

Guangdong Welland Technology Co., Ltd. FI2419LB Smart Body Fat Scale 2AP3Q-FI2419LB 2AP3QFI2419LB fi2419lb

Instruction Manual for Guangdong models including: 2AP3Q-FI2419LB, 2AP3QFI2419LB, FI2419LB Professional 8 Electrodes Smart Body Fat Scale, FI2419LB, Professional 8 Electrodes Smart Body Fat Scale, 8 Electrodes Smart Body Fat Scale, Electrodes Smart Body Fat Scale, Smart Body Fat Scale, Body Fat Scale, Fat Scale, Scale

PDF Viewing Options

Not Your Device? Search For Manuals or Datasheets below:


File Info : application/pdf, 15 Pages, 1.91MB

Document DEVICE REPORTGetApplicationAttachment.html?id=8364616 
Professional 8 Electrodes Smart Body Fat Scale
Modal: FI2419LB

Power supply: 4 x AAA batteries Do not mix different kinds of batteries. Make sure the polarity is correct when inserting batteries into the compartment. Take out the batteries if the scale is not to be used for a long time.


Touch button Display screen
ITO Sensors

Electrodes for thumb Touch button Battery compartment
ITO Sensors
Measuring handle Anti-Slip feet



Pregnant Mode Athlete Mode

Bluetooth Battery

Stone Pound Kilogram

Weight changes
Body fat Visceral Fat

Weight Body Type Muscle Mass BMI
Weight Trends









5. Offline User Function
5.1 User setup
1. Short Press SET to active the scale,keeping scale on Hi. 2. Short Press SET to enter user setup.
3. Touch < or > to select user code from P0-U1-U2-U3-U4 when they blink. P0 is the guest mode. Data is not saved in P0. 4.First setup users: Short press SET until age blink, and touch < or > to adjust number. Repeat above can adjust gender and height. Last click SET to confirm the user information. Pls note you need to set up each information within 5 seconds, otherwise the user will automaticlly set up as 165cm, 18 ye ars old, female. 5. Modify existing user information: First follow the 1- 3 steps to enter to the user mode, choose your user you want to change and then Long Press SET until age blink and touch < or > to adjust nu mber. Short press SET can adjust gender and height. Last click SET to confirm the user information
5.2 Unit Switch
1. Short Press SET to active the scale,keeping scale in on Hi. 2. Short Press < to select UNIT (kg, st, st:lb), default unit is kg.


5.3 Volumn Adjustment
1. Short Press SET to activate the scale,keeping scale on Hi.. 2. Short Press > to select VOL, small, medium, large and unmute models for you to choose.


5.4 Offline Data Review
1. Short Press SET to activate the scale,keeping scale on Hi. 2. Choose the User as you want to check(Pls check 5.1 User setup) 3. Long Press < for 5 seconds to enter data review mode. 4. Press < or > to check from data 1 to 8. Maximum data storage per offline user is 8. 5. Long Press SET for 3 seconds to exit data review mode. (Online data can only be reviewed by App.)
5.5 Delete all users
1. Short Press SET to activate the scale,keeping scale on Hi. 2. Long Press SET for 3 seconds to enter User delete mode. 3. Short Press SET again and Press < or > to select YES or NO, Press SET to confirm you r choose. YES to delete all, NO to cancel.


6. Start Measuring
6.1 Correct stance & Correct grip


6.2 Measuring steps
3. The body fat is being measured when the colorful dotmatrix are "dancing" . Please hold the handle with the correct gesture until the measurement is completed.
4. If the scale is not mute, the voice broadcast will play automatically during measurement. Please follow instructions to complete the progress.


7. Battery and Fault Reminders
8. Parameters
Professional 8 Electrodes Smart Body Fat Scale FI2419LB kg/lb/st
4*AAA Batteries


9. FCC Statement
Operation is subject to the following two conditions:
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of thefollowing measures: · Reorient or relocate the receiving antenna. · Increase the separation between the equipment and receiver. · Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. · Consult the dealer or an experienced radio/TV technician for help. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
FCC RF Exposure Warning Statement: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment can be used in portable exposure conditions.

Related FCC IDs:

Search Any Device: