Nionio Chen/WHQ/Wistron

Labels and Locations

Intel Corporation AX211D2 PD9AX211D2 PD9AX211D2 ax211d2

PDF Viewing Options

Not Your Device? Search For Manuals or Datasheets below:


File Info : application/pdf, 4 Pages, 457.88KB

Document DEVICE REPORTGetApplicationAttachment.html?id=5718992
WLAN label is sticked on the core side of D cover.
Label
AX211D2W Contains FCC ID : PD9AX211D2
IC : 1000M-AX211D2

Label Information

Note: Due to the small device size 12mm x 16mm it is too small to imprint the FCCID and IC ID on the module. The font size required would need to be < size 4 font and is considered to require magnification for legibility. The ID's will be placed in the Information Guide. External host labeling is still required once integrated into host.
FCC ID: PD9AX211D2 IC: 1000M-AX211D2

Wireless Solutions Group Intel Confidential

Doug Noble
From:
Sent: To: Cc: Subject:

Certification Bureau / Bureau homologation (IC) <[email protected]> Wednesday, February 3, 2021 9:12 AM Timothy R. Johnson [email protected] RE: Label Permission Request

Good Day Tim,
Label exemption would be acceptable for this device. Please place the label information in accompanying literature.
Regards,
Engineering, Planning and Standards Branch (14) Innovation, Science and Economic Development Canada / Government of Canada Tel: 613-990-4218 / TTY: 1-866-694-8389
Direction générale du génie, de la planification et des normes (14) Innovation, Sciences et Développement économique Canada / Gouvernement du Canada Tél: 613-990-4218 / ATS: 1-866-694-8389 [email protected]

From: Timothy R. Johnson <[email protected]> Sent: February 1, 2021 10:27 PM To: Certification Bureau / Bureau homologation (IC) <[email protected]> Cc: [email protected] Subject: Label Permission Request
Intel submitted and application to ACB in December. For the labeling exhibit they submitted the label with an explanation that the form factor has been accepted in the past by ISED. ISED asked for us to provide Intels previous correspondence in order to proceed as well as something denoting appropriate sizes and the application has been in pass back since December.
Our contact at Intel is fairly certain ISED has granted them permission in the past on this form factor, but has not had the time to investigate and provide the past proof and is currently "buried" in other priorities. Therefore on their behalf we are submitting the attached and requesting permission for the labeling to be placed into the manual based on the information provided.
They use the basic form factor for many devices and have several upcoming approvals based on the same form factor (known as D2 to Intel) as well. If possible we would like to obtain permission for Intel to place the labeling in the manual for all certifications that they use this particular form factor.
Could ISED please review the attached and provide feedback as appropriate?
Thank You,
1

Timothy R. Johnson, iNARTE Certified EMC Engineer (No. EMC-002205-NE) and Wireless Device Certification Professional (No. WDCP-100101) Examining Engineer American Certification Body, Inc. 6731 Whittier Ave., C110 McLean, VA 22101

email:

[email protected]

alternate email: [email protected]

USA direct number: 404-414-8071

USA corporate phone: 703-847-4700

USA corporate fax: 703-847-6888

This message is intended only for the use of the individual or entity to which it is addressed and may contain information that is confidential and exempt from disclosure under applicable law.

2



Related FCC IDs:

Search Any Device: