蓝牙耳机说明书新款dongle

Users Manual

Xiamen Ubeida Electronic Technology Co.,Ltd. UB-0601 dongle 2BC7P-UB-0601 2BC7PUB0601 ub 0601

User Guide for inbertec models including: CB110, CB110 Bluetooth Headset, Bluetooth Headset, Headset

PDF Viewing Options

Not Your Device? Search For Manuals or Datasheets below:


File Info : application/pdf, 2 Pages, 2.34MB

Document DEVICE REPORTGetApplicationAttachment.html?id=7389986
Bluetooth Headset
User Manual

1 Packing List

USB2.0
(USB-A to USB-C) Bag

Headset

Bluetooth adapter (Optional)

2 USB Charging

6TFS.BOVBM
User Manual

Note: It is recommended to use 5V charger, and fully charge the headset for the first time, other specification charger may cause compatibility issues that prevent them from working properly.

LED Indicator Status Charging
Full
1.5hrs charge to full

Charging (Red light flashing)
Fully charged (Blue light on)

3 On/Off/Battery/Connection Status

LED Indicator

On Off

Hold 2 SEC
Hold 4 SEC

Press 3X

blue red

Multifunction key
"Power On" "Power Off"

Check battery level & connection status

4 Pairing and Device Connection

 Built-in Bluetooth Step 1: Enter pairing mode

Connect to new device

Red and blue lights flashing

Hold 4 SEC

Multifunction key

Press 1X
c Hold

Multifunction key


 + -

4 SEC

Connect to Paired Device

"Power On Pairing"
"Paring Cancelled (under paring mode)"
"Paring List Cleared"
Hold 2 SEC
Power On

Automatic Connection

"Connected"

Failed to pair after 10s

"Pairing"

Note: A paired device will be automatically connected to headset when power on the headset.

Step 2: Select the headset from the Bluetooth device list

ON BT Headset

"Connected"

Note: If your PC doesn't have built-in Bluetooth, you need to pair the headset with a Bluetooth dongle.
 Pairing and Connecting Device No Built-in Bluetooth Device

Power On State

Already pre-paired when leaving the factory,automatically connected

Note: To pair a second device, disconnect (unplug) the USB bluetooth adapter first. Then follow the instruction to pair the second device. After the second device is paired, reconnect the USB bluetooth adapter to enjoy 2 connections together.

5 Call Control and LED Indicator

Answer Call

Press 1X

End Call

Press 1X

Reject call

Press 2X

Hold call

Press 2X

Resume call

Answer 3rd party call

End 3rd party call
Answer 3rd party call and hold current call
Reject 3rd party call and continue current call

Multifunction key

Press 2X Press 1X Press 1X Press 2X Hold 1 SEC

Press 1X
Press 1X

6 Music Control

Press 1X
Press 1X



Press 1X

Hold 1 SEC
Hold 1 SEC

7 Wear the Headset

1-1/5'' 30mm



Notes

1To give you a more efficient charging experience, please use the provided cable.

2. The red light is flashing on during charging, and bluelight will be on when the battery is fully charged. 3. When the battery level is lowthe headset will have a voice prompt "recharge headset".

4. During use, click the "Multifunction key" three times to check the current battery level and connection status.

 battery high

60%-100%

 battery medium  battery low

20%-60% 20%

5. Follow below operations to check battery level and connection status.

Operations

Connection Status

LED Indicator

Voice Prompt

Three click multifunction key Connected(Standby or Music on) Blue light on for 2s "Battery high /medium/ low" "Connected"

Three click multifunction key Disconnected

Red light on for 2s "Battery high /medium/ low" "Disconnected"

6. Bluetooth: 2402-2480MHz Bluetooth Headset: 7.11dBm Dongle: 4dBm Bluetooth: GFSK, /4-DQPSK, 8DPSK

Safety Instructions
1. Do not disassemble this product or put it into fire or water to avoid short circuit, electric leakage, or damage to the product.
2. Don't use this product in high temperature, humid, or corrosive environments to avoid failures. 3. Don't contact this product with corrosive liquids, as it may cause serious damage. 4. Don't disassemble or modify this product for any reason to avoid secondary failures and burns. 5. Don't place the product at temperatures below - 10°C or above 55°C. 6. Don't place the product at temperatures below 0°C or above 45°C while charging. 7. Don't strike, throw, or strongly shock this product, as rough methods can damage the internal circuit board
structure.

FCC Caution
Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: --Reorient or relocate the receiving antenna. --Increase the separation between the equipment and receiver. --Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. --Consult the dealer or an experienced radio/TV technician for help. This device complies with FCC radiation exposure requirement set forth for an uncontrolled environment.



Related FCC IDs:

Search Any Device: