MK-29 MURS User Manual 20250124

ht1

User manual

Telonics Inc MK29 Command and Control link for wildlife monitoring JYL-MK29 JYLMK29 mk29

User Manual for TELONICS models including: JYL-MK29, JYLMK29, mk29, MK-29 MURS Command Control Transceiver, MK-29 MURS, Command Control Transceiver, Control Transceiver, Transceiver

PDF Viewing Options

Not Your Device? Search For Manuals or Datasheets below:


File Info : application/pdf, 2 Pages, 222.46KB

Document DEVICE REPORTGetApplicationAttachment.html?id=8363023 
 
!"#$%&'#! () (#* +++ %&'#! () (#*
MK-29 MURS Command/Control Transceiver User Manual
TELONICS INTERNAL USE ONLY ­ Not for sale to the public
Automated testing of MK-29: Prior to integrating into a finished product, all MK-29 Transceivers must undergo automated testing to ensure they function properly and meet the FCC RF requirements.
Power Supply: Required supply voltage: 2.8 ­ 4.3Vdc @ 50mA maximum current.
Antenna: This radio is certified for use with antennas meeting the following criteria:
- Nominal impedance = 50  (151-155MHz) - Antenna Gain < +7dBi typical.
Integration testing: The finished product must undergo RF testing to ensure the MK-29 Transceiver is connected to its antenna and power supply and functioning properly.
FCC Licensing Information: The Telonics MK-29 Transceiver is FCC Part 95J type accepted for use on MURS. It operates on MultiUse Radio Service (MURS) frequencies according to the Federal Communications Commission (FCC) Rules in the United States. MURS radios are licensed by rule. As such, a license is not required to transmit on these frequencies. For more information, visit the FCC's web site at https://www.fcc.gov/.
Labeling: Any product containing the MK-29 should meet the following labeling requirements:
 The FCC ID shall be placed in the user manual of all finished products.
 Space permitting, the following label should be affixed to the final product. Minimum font size is four point. [sample label shown to right]
 When the finished product is so small or for such use that it is impracticable to label with a font size that is four points or larger, the FCC ID shall be placed on a removable label.

APPENDIX MK-29 MURS Command/Control Transceiver
Specifications Rev _ 2024.12.23

Frequency Specifications (TX & RX):  Channels 1,2,3 / 11.25 kHz bandwidth:  Channels 4,5 / 20.00 kHz bandwidth:
Frequency Tolerance:

151.820, 151.880, 151.940 MHz 154.570, 154.600 MHz ±2.0 ppm max [temp & voltage]

Modulation Characteristics: 2-Modes / High Data Rate (HDR) and Low Data Rate (LDR)

 11.25 kHz channel bandwidth (LDR only)

Modulation Type: 4GFSK Peak Deviation: ± 4.0 kHz Symbol Rate: 2.4 ksymbol/sec

 20kHz channel bandwidth (HDR/LDR)

Modulation Type: 4GFSK

Peak Deviation:

± 6.4 kHzHDR

± 4.0kHzLDR

Symbol Rate: 6.4 ksymbol/secHDR

2.4 ksymbol/secLDR

RF Output Power:

+15dBm max typical on all channels

Antenna Gain (anticipated):

-10 dBi min typ (collar application) +7dBi maximum

Power Supply:

2.8 ­ 4.3Vdc (100mW max)

Environmental:

Operating Temp: -30°C to +60°C

Board dimensions:

0.5 x 0.775 x .125" nominal

Electrical Connections (typical):

Power and serial interface: 28ga stranded w/ PTFE insul. Red = +BATTERY (3.6V nom) BLK = -BATTERY Yel = Serial (A/R ­ as req'd)
RF (TX & RX): coaxial cable (1.12mm, A/R)

References

Related FCC IDs:

Search Any Device: