雨林木风

Antenna specification

Shenzhen Speediance Living Technology co., Ltd. SHA2A1 Smart Handles 2A4WP-SHA2A1 2A4WPSHA2A1 sha2a1

PDF Viewing Options

Not Your Device? Search For Manuals or Datasheets below:


File Info : application/pdf, 10 Pages, 2.41MB

Document DEVICE REPORTGetApplicationAttachment.html?id=7390389 
BW2.4FNX42-12X
 FPC\PCB\\\\ RF 


Product specifications acknowledgment


(Recognized manufacturers)

Manufacturer

Description

 2.4G 


Product Type 
BW2.4FNX42-12AL120 BW2.4FNX42-12B1L120 BW2.4FNX42-12B2L120

  120mm IPEX1  120mm IPEX4   120mm

   














www.batwireless.com

 1   10 

BW2.4FNX42-12X
 FPC\PCB\\\\ RF 

1.1 Specifications
 Antennas Type  Frequenc Range(MHz)  Input Impendence ()  V.S.W.R  Gain (dBi)  Polarization Type  Power Capacity (w)  Lingtning Protection  DC VoltageV  Dimensionmm /Connector Type:  Cable typemm  Cable length(mm)  Radiator  Color  Weight(g)
 Operating Temperature
 Storage Temperature

BW2.4FNX42-12B1 2400-2500 50 <1.5 2-3dBi  Vertical 50 None None 42x12 IPEX-1 1.13 120 None  Black None
-40~80
-20~85

*

www.batwireless.com

 2   10 

1.2 Antenna Picture

BW2.4FNX42-12X
 FPC\PCB\\\\ RF 

BW2.4FNX42-12B1   * 

www.batwireless.com

 3   10 

BW2.4FNX42-12X
 FPC\PCB\\\\ RF 
2. Electrical Specification
2.1 Test Equipment
A. VSWR and input impedance: Agilent 8753/E5071 Network Analyzer B. Antenna gain and efficiency: ETS three-dimensional anechoic chamber
2.2 Test Setup 2.2.1 Frequency Range
2.2.2 VSWR
Step 1: The antenna is arranged on the customer provided test fixture. Step 2: The VSWR of the antenna is measured via Agilent 8720/8753 Network Analyzer (see figure. 1).
Figure.1

www.batwireless.com

 4   10 

BW2.4FNX42-12X
 FPC\PCB\\\\ RF 
2.2.3 Radiation pattern and Gain
A. The 3D chamber provides less than -40dB reflectivity from 800MHz to 6GHz and a 40cm diameter spherical quiet zone. The measurement results are calibrated using both dipoles and standard gain horns (see figure. 2).
B. The antenna under tested is arranged in the turned table and a decoupling sleeve is used to reduce feed line radiation (see figure. 3).
C. The measured results of the radiation patterns and antenna gain are obtained from the control system and showed on the monitor (see figure. 4 and 5).

Figure.2

Figure.3

Figure.4 www.batwireless.com

Figure.5  5   10 

BW2.4FNX42-12X
 FPC\PCB\\\\ RF 
3. Performance Data
3.1 Passive data
VSWR/Return Loss/Smith Chart

www.batwireless.com

 6   10 

BW2.4FNX42-12X
 FPC\PCB\\\\ RF 
*

www.batwireless.com

 7   10 

4.Mechanical Specification
4.1 Assembly Drawing

BW2.4FNX42-12X
 FPC\PCB\\\\ RF 

BW2.4FNX42-12AL120 www.batwireless.com

 8   10 

5. RF113

BW2.4FNX42-12X
 FPC\PCB\\\\ RF 

www.batwireless.com

 9   10 

BW2.4FNX42-12X
 FPC\PCB\\\\ RF 
6.
""
  
In order to provide our users with better service, Shenzhen Bat Wireless Technology Co.,Ltd (hereinafter referred to as Bat Wireless) will try to present as detailed and accurate product information as possible in this manual. However, due to the timeliness of the manual content, Bat Wireless shall not absolutely guarantee the unlimited timeliness and applicability of the file. Bat Wireless has the right to update the manual content without further notice. To get the latest edition information, pls visit the official website of Bat Wireless or contact our customer service staff. Thanks for your trust and support!

www.batwireless.com

 10   10

Related FCC IDs:

Search Any Device: