( - HKA15019577-6A-P23-150199400R-\216d\227l\217\221)
客户承认书
2010-9-21 ---. Page 3. Page 3. 深圳市航嘉驰源电气股份有限公司. SHENZHEN HUNTKEY ELECTRIC CO., LTD. Contents/目录. 1. SCOPE/概述.
Not Your Device? Search For Manuals or Datasheets below:
File Info : application/pdf, 9 Pages, 446.30KB
Document DEVICE REPORT0000000156SHENZHEN HUNTKEY ELECTRIC CO., LTD SPECIFICATION FOR APPROVAL CUSTOMER/ CUSTOMER P.N./ MODEL NO./ APPROVAL NO./ PREPARED DATE/ HKA15019577-6A WI-F-20100464 2010-9-21 CUSTOMER AUTHORIZED SIGNATURE/ Please return to us one copy of "SPECIFICATION FOR APPROVAL"with you approved signature./ /. ADD: Huntkey Park,Banxue Road,Bantian,Shenzhen, Guangdong, P. R. China TEL: 0755-89606666 P.C.: 518129 FAX: 0755-89606333 http://www.huntkey.com Page 1 SHENZHEN HUNTKEY ELECTRIC CO., LTD E. C. LIST/ Rev. Description of Change/ Before/ After/ 1 Original Release --- Changed Date/ ECN No. 2010-9-21 --- Page 2 SHENZHEN HUNTKEY ELECTRIC CO., LTD Contents/ 1. SCOPE/.....................................................................................................................................4 2. Input Characteristics/ ........................................................................................................ 4 3. Output Characteristics/ ..................................................................................................... 5 4. Protection Requirements/ ................................................................................................. 6 5. Environment Requirements/ ............................................................................................. 6 6. Reliability Requirements/ ............................................................................................. 7 7. EMI/EMS Standards/EMI/EMS ..............................................................................................7 8. Safety Standards/ .............................................................................................................. 7 9. Mach. Outline Drawing/ ....................................................................................................... 9 10. Label Drawing/ ................................................................................................................... 10 11. Package Drawing/ ....................................................................................................... 11 Page 3 1. SCOPE/ SHENZHEN HUNTKEY ELECTRIC CO., LTD The document details the electrical, mechanical and environmental specifications of a SMPS, the power supply provides 150 W continuous output power. 150 W(),. The power supply shall meet the RoHS requirements. RoHS . Description/ SMPS Adaptor(Wall mount)/ SMPS Adaptor(Desk-top)/ Open Frame/ SMPS Unit (With Case)/ Others/ 2. Input Characteristics/ 2.1. Input Voltage / The range of input voltage is from 90Vac to 265Vac with a single phase. 90Vac 265Vac, . Minimum/ Rating/ Maximum/ Input Voltage/ 90Vac 100Vac~240Vac 265Vac Input Frequency/ 47Hz 60Hz/50Hz 63Hz 2.2. Input AC Current/ 2Amax. @ 90Vac input & Full load/ 90Vac 2A 2.3. AC Receptacle/ The inlet receptacle shall comply with IEC 320 standard sheet C6(3 pin inlet) be certified, Recognized or approved by CSA, UL, VDE. IEC 320 C6 (3 pin ), CSAULVDE . 2.4. Inrush Current (cold start)/() Power supply inrush current shall be less than the ratings of its critical components (including rectifiers, fuses, and other surge limiting device) under all conditions of line voltage of Section 2.1. 2.1 ( 2.5. Average Efficiency / While input 115Vac and 230Vac,the average efficiency is more than 89%.The test point is at 25%,50%,75% and 100% of max load respectively. 115Vac 230Vac 89% 25%,50%,75% 100% 2.6. No-Load Input Power Dissipation/ The internal power loss at no load operation shall be less than below values : Page 4 Vin (Vac) 231Vac to 265Vac 230Vac 90Vac to 120Vac SHENZHEN HUNTKEY ELECTRIC CO., LTD Input Power with No load condition (W) 0.50 W 0.50 W 0.45 W 3. Output Characteristics/ 3.1. Static Output Characteristics <Vo & R+N>/<&+> Output Rated Load/ Peak Output Range R+N Remark Rating Min. Load Max. Load Load +19.5V 0 A 7.7A / 18.5V ~ 20 V 250mVp-p Ripple & Noise: Tested by a oscilloscope using 20MHz bandwidth and the output is paralleled a 0.01uF ceramic capacitor and a 10uF electrolysis capacitor. (Under the input Voltage 100~240Vac) : 20MHz , 0.01uF 10uF ( 100~240Vac) 3.2. Line/ Load Regulation// Output Load Condition/ Line Regulation Load Regulation Remark Rating Min. Load Max. Load +19.5V 0 A 7.7A 3.3. Turn - on Delay Time/ ± 1% ± 5% 2S max. @ 90Vac input & Full load/ 90Vac 2S 3.4. Hold-up Time/ 10mS min. @ Full load &100Vac/60Hz input turn off at worst case 100Vac , 10mS 3.5. Rise Time/ 30mS max. @ Full load/ 30mS 3.6. Fall Time/ 20mS max. @ Full load/ 20mS 3.7. Overshoot / Any overshoot at turn on or turn off of AC input shall be within spec value. 18.5V ~ 20 V 3.8. Output Load Transient Response/ Output voltage is within 18.5-20 V while the load step is from 20% to 80% of max load, R/S: 1A/uS, frequency: 1000Hz, and 500uS duration at 80% of max load. 18.5-20V ,: 20% 80%,: 1A/uS,: 1000Hz, 80% Page 5 SHENZHEN HUNTKEY ELECTRIC CO., LTD 500uS. 3.9. Capacitance Load/ While input 90Vac and capacitance load is 4000uF,the adapter can turn on normally and the output is in the rated range. 90Vac4000uF 4. Protection Requirements/ 4.1. Over Current Protection/ OCP Point Limited: < 12A of Max. Load/: 12A The adapter will latch off that means no output when the over current applied to the output. ,,, 4.2. Short Circuit Protection/ The adapter will latch off that means no output while the output is short to GND, the power supply shall not damage. ,,, 4.3. Over Voltage Protection/ The adapter will latch off that means no output while over voltage happened at output terminal that caused by internal fault, the output trip voltage will be excess than 25V. 25V , 4.4. Brown-out Protection / The adaptor move into a protection mode when input voltage is less than 68V±10% with full load , and it will auto-recovery when the the fault is removed 68V±10%,,,. 5. Environment Requirements/ 5.1. Operating Temperature and Relative Humidity/ 0 to +40 8%RH to 80%RH 5.2. Storage Temperature and Relative Humidity/ -31 to +60 8%RH to80%RH non-condensing @ Sea level shall below 10,000 feet 10,000 -31 +60 , 8%RH to 80%RH 5.3. Temperature Rise of Adapter's Case Surface / the temperature rise must be less than 50 deg C with any input voltages and loadings at any points, and must be less than 45 deg C 220Vac 50 , 220V 45 5.4. Operational Life/ The Operational Life shall be at least 30,000 Hours at 35 degC closed ambient at sea level, 220Vac Page 6 SHENZHEN HUNTKEY ELECTRIC CO., LTD : 30,000 ,35 ,, 220v 5.5. Vibration/ 10 to 300Hz sweep at a constant acceleration of 1.0G(Breadth: 3.5mm) for 1Hour for each of the perpendicular axes X, Y, Z : 10 to 300Hz, : 1.0G(: 3.5mm), X, Y, Z 1 5.6. Weight / excluding the AC power cord, shall not exceed 650 +/- 10 grams. AC 650+/-10g 6. Reliability Requirements/ 6.1. Burn-in/ The failure rate must be defined at 35 degrees centigrade ambient temperature, sea level, 220 Vac, and 100 percent of output load The failure rate must be less than 0.50% per 1000 hours. 220V ,35 1000 . 0.5% 7. EMI/EMS Standards/EMI/EMS 7.1. EMI Standards/EMI EN 55022:1998, +A1:2000 +A2:2003, Class B CISPR 22:2003, Class B AS/NZS CISPR 22: 2004, Class B The products are 3dB below the limit using the non-central T distribution for EMI and the noise measurement is defined as Q-peak hold mode 7.2. EMS Standards/EMS EN 61000-3-2 Harmonic current emissions EN 61000-3-3 Voltage fluctuations & flicker EN 61000-4-2 Electrostatic Discharge(ESD): 8kV air discharge,4kV contact discharge EN 61000-4-3 Radio-Frequency Electromagnetic Field Susceptibility Test-RS EN 61000-4-4 Electrical Fast Transient/Burst-EFT Surge Immunity Test: AC Power Line: line to line 1.2kV,line to earth EN 61000-4-5 2.3kV EN 61000-4-6 Conducted Radio Frequency Disturbances Test-CS EN 61000-4-8 Power Frequency Magnetic Field Test EN 61000-4-11 Voltage Dips 8. Safety Standards/ 8.1. Dielectric Strength(Hi-pot)/() Primary to Secondary:2500Vdc / 300uA / 60 seconds(3 seconds for production) : 2500Vdc / 300uA / 60 (: 3 ) Page 7 SHENZHEN HUNTKEY ELECTRIC CO., LTD 8.2. Leakage Current/ 200uAmax. at 240Vac / 50Hz input/ 240Vac/50Hz 200uA 200uAmax. at 127Vac / 60Hz input/ 127Vac/60Hz 200uA 8.3. Regulatory Standards/ Type UL/CUL TUV CCC CE Country USA Europe China Europe Standard UL60950-1 EN60950-1 GB4943 EN60950-1 Type PSB PSE NOM GOST Country Standard Singapore IEC60950-1 Japan J60950 Mexico NOM-001 Russia MEK60950 Page 8 SHENZHEN HUNTKEY ELECTRIC CO., LTD 9. Mach. Outline Drawing/ Page 9PrimoPDF PrimoPDF http://www.primopdf.com/