Test Report LTE band 14

Leax Arkivator Telecom USA Inc. FT205L 2AVFN-FT205L 2AVFNFT205L ft205l

PDF Viewing Options

Not Your Device? Search For Manuals or Datasheets below:


File Info : application/pdf, 13 Pages, 836.94KB

Document DEVICE REPORTGetApplicationAttachment.html?id=7314618 
Shenzhen CTA Testing Technology Co., Ltd.
Room 106, Building 1, Yibaolai Industrial Park, Qiaotou Community, Fuhai Street, Bao'an District, Shenzhen, China
TEST REPORT
FCC Part 90R
Report Reference No......................: CTA24042900107 FCC ID..............................................: 2AVFN-FT205L Compiled by ( position+printed name+signature) .: File administrators Jinghua Xiao Supervised by ( position+printed name+signature) .:
Project Engineer Lushan Kong
Approved by
( position+printed name+signature) .: RF Manager Eric Wang
Date of issue.....................................: May. 07, 2024
Testing Laboratory Name ..............: Shenzhen CTA Testing Technology Co., Ltd.
Room 106, Building 1, Yibaolai Industrial Park, Qiaotou Community, Address ............................................:
Fuhai Street, Bao`an District, Shenzhen, China Applicant's name ............................: Leax Arkivator Telecom USA Inc
Address ............................................: 833 E Arapaho Rd.Suite 203 Richardson, TX 75081
Test specification ...........................:
FCC CFR Title 47 Part 2, Part 90R Standard ...........................................: ANSI/TIA-603-E-2016
KDB 971168 D01 Shenzhen CTA Testing Technology Co., Ltd. All rights reserved. This publication may be reproduced in whole or in part for non-commercial purposes as long as the Shenzhen CTA Testing Technology Co., Ltd. is acknowledged as copyright owner and source of the material. Shenzhen CTA Testing Technology Co., Ltd. takes no responsibility for and will not assume liability for damages resulting from the reader's interpretation of the reproduced material due to its placement and context. Test item description......................: Industrial 4G Router
Trade Mark .......................................: N/A Manufacturer ....................................: Leax Arkivator Telecom USA Inc Model/Type reference.......................: FT205L Listed Models ..................................: N/A Ratings .............................................: DC 12.0V From battery Modulation .......................................: QPSK, 16QAM
Hardware version .............................: V1.0 Software version ..............................: V1.0 Frequency.......................................... E-UTRA Band 14
Result................................................: PASS

Report No.: CTA24042900107
TEST REPORT

Page 2 of 13

Equipment under Test

: Industrial 4G Router

Model /Type

: FT205L

Listed Models : N/A

Applicant

: Leax Arkivator Telecom USA Inc

Address

: 833 E Arapaho Rd.Suite 203 Richardson, TX 75081

Manufacturer : Leax Arkivator Telecom USA Inc

Address

: 833 E Arapaho Rd.Suite 203 Richardson, TX 75081

Test result

Pass *

* In the configuration tested, the EUT complied with the standards specified page 4.
The test report merely corresponds to the test sample. It is not permitted to copy extracts of these test result without the written permission of the test laboratory.

Report No.: CTA24042900107

Page 3 of 13

Contents
1 SUMMARY ............................................................................................................................................................4
1.1 TEST STANDARDS .................................................................................................................................................4 1.2 TEST DESCRIPTION ....................................................................................................................................................4 1.3 ADDRESS OF THE TEST LABORATORY ..............................................................................................................................4 1.4 TEST FACILITY...........................................................................................................................................................4 1.5 STATEMENT OF THE MEASUREMENT UNCERTAINTY ...........................................................................................................5
2 GENERAL INFORMATION.......................................................................................................................................6
2.1 ENVIRONMENTAL CONDITIONS.....................................................................................................................................6 2.2 GENERAL DESCRIPTION OF EUT...................................................................................................................................6 2.3 DESCRIPTION OF TEST MODES AND TEST FREQUENCY ......................................................................................................6 2.4 EQUIPMENTS USED DURING THE TEST...........................................................................................................................6 2.5 RELATED SUBMITTAL(S) / GRANT (S).............................................................................................................................7 2.6 MODIFICATIONS .......................................................................................................................................................7
3 TEST CONDITIONS AND RESULTS ...........................................................................................................................8
3.1 OUTPUT POWER.......................................................................................................................................................8 3.2 SPURIOUS EMISSION ...............................................................................................................................................10
4 TEST SETUP PHOTOS OF THE EUT ........................................................................................................................ 13
5 PHOTOS OF THE EUT ........................................................................................................................................... 13

Report No.: CTA24042900107

Page 4 of 13

1 SUMMARY
1.1 TEST STANDARDS
The tests were performed according to following standards: FCC Part 2: FREQUENCY ALLOCA-TIONS AND RADIO TREATY MAT-TERS; GENERAL RULES AND REG-ULATIONS FCC Part 90 : PRIVATE LAND MOBILE RADIO SERVICES ANSI/TIA-603-E-2016: Land Mobile FM or PM Communications Equipment Measurement and Performance Standards. ANSI C63.26-2015: IEEE/ANSI Standard for Compliance Testing of Transmitters Used in Licensed Radio Services FCCKDB971168D01 Power Meas License Digital Systems
1.2 Test Description

Test Item

Section in CFR 47

Result

RF Output Power(Conducted Measurement) RF Output Power(Radiated Measurement) Peak-to-Average Ratio
99% & -26 dB Occupied Bandwidth
Spurious Emissions at Antenna Terminal

Part 2.1046 Part 90R.542(a)(6)
Part 2.1046 Part 90R.542(a)(6)
Part 24.232 (d)
Part 2.1049
Part 2.1051 Part 90R.543(e)

Referring to the FCC ID No: XMR202008EC25AFXD issued by the Testing Lab
(TA technology(shanghai) co., Ltd.)
Pass
Referring to the FCC ID No: XMR202008EC25AFXD issued by the Testing Lab
(TA technology(shanghai) co., Ltd.)
Referring to the FCC ID No: XMR202008EC25AFXD issued by the Testing Lab
(TA technology(shanghai) co., Ltd.)
Referring to the FCC ID No: XMR202008EC25AFXD issued by the Testing Lab
(TA technology(shanghai) co., Ltd.)

Field Strength of Spurious Radiation

Part 2.1053 Part 90R.543(e)

Pass

Referring to the FCC ID No:

Emission Mask

Part 2.1051 Part 90R.543(e)

XMR202008EC25AFXD issued by the Testing Lab (TA technology(shanghai) co.,

Ltd.)

Referring to the FCC ID No:

Frequency stability

Part 2.1055 Part 90.213

XMR202008EC25AFXD issued by the Testing Lab (TA technology(shanghai) co.,

Ltd.)

Note1: the LTE module in this product has already finished the certification

(FCC ID: XMR202008EC25AFXD), Reference the results in the original test report.

1.3 Address of the test laboratory

Shenzhen CTA Testing Technology Co., Ltd. Room 106, Building 1, Yibaolai Industrial Park, Qiaotou Community,Fuhai Street, Bao'an District, Shenzhen, China The 3m-Semi anechoic test site fulfils CISPR 16-1-4 according to ANSI C63.4:2014 and CISPR 16-1-4:2010 SVSWR requirement for radiated emission above 1GHz.

1.4 Test Facility
The test facility is recognized, certified, or accredited by the following organizations:

Report No.: CTA24042900107

Page 5 of 13

FCC-Registration No.: 517856 Designation Number: CN1318 Shenzhen CTA Testing Technology Co., Ltd. has been listed on the US Federal Communications Commission list of test facilities recognized to perform electromagnetic emissions measurements.

Industry Canada Registration Number. Is: 27890 CAB identifier: CN0127 The Laboratory has been registered by Certification and Engineering Bureau of Industry Canada for radio equipment testing.

A2LA-Lab Cert. No.: 6534.01 Shenzhen CTA Testing Technology Co., Ltd. has been listed by American Association for Laboratory Accreditation to perform electromagnetic emission measurement.
The 3m-Semi anechoic test site fulfils CISPR 16-1-4 according to ANSI C63.10 and CISPR 16-14:2010.

1.5 Statement of the measurement uncertainty

The data and results referenced in this document are true and accurate. The reader is cautioned that there

may be errors within the calibration limits of the equipment and facilities. The measurement uncertainty was

calculated for all measurements listed in this test report acc. to TR-100028-01" Electromagnetic compatibility

and Radio spectrum Matters (ERM);Uncertainties in the measurement of mobile radio equipment

characteristics; Part 1" and TR-100028-02 "Electromagnetic compatibility and Radio spectrum Matters

(ERM);Uncertainties in the measurement of mobile radio equipment characteristics; Part 2 " and is

documented in the Shenzhen CTA Testing Technology Co., Ltd. quality system acc. to DIN EN ISO/IEC

17025. Furthermore, component and process variability of devices similar to that tested may result in

additional deviation. The manufacturer has the sole responsibility of continued compliance of the device.

Hereafter the best measurement capability for Shenzhen CTA Testing Technology Co., Ltd. :

Measuremen

Test

Range

t

Notes

Uncertainty

Radiated Emission

9KHz~30MHz

3.02 dB

(1)

Radiated Emission

30~1000MHz

4.06 dB

(1)

Radiated Emission

1~18GHz

5.14 dB

(1)

Radiated Emission

18-40GHz

5.38 dB

(1)

Conducted Disturbance

0.15~30MHz

2.14 dB

(1)

Output Peak power

30MHz~18GHz

0.55 dB

(1)

Power spectral density

/

0.57 dB

(1)

Spectrum bandwidth

/

1.1%

(1)

Radiated spurious emission (30MHz-1GHz)

30~1000MHz

4.10 dB

(1)

Radiated spurious emission (1GHz-18GHz)

1~18GHz

4.32 dB

(1)

Radiated spurious emission (18GHz-40GHz)

18-40GHz

5.54 dB

(1)

(1) This uncertainty represents an expanded uncertainty expressed at approximately the 95%

confidence level using a coverage factor of k=2.

Report No.: CTA24042900107

Page 6 of 13

2 GENERAL INFORMATION
2.1 Environmental conditions Date of receipt of test sample : Apr. 11, 2024

Testing commenced on

: Apr. 11, 2024

Testing concluded on

: May. 07, 2024

During the measurement the environmental conditions were within the listed ranges:

Normal Temperature:

25°C

Relative Humidity:

55 %

Air Pressure:

101 kPa

2.2 General Description of EUT

Product Description: Model/Type reference: Power supply:
Adapter information:
Testing sample ID LTE Operation Band:

Industrial 4G Router FT205L DC 12.0V From external circuit Model: GQ12-120100-CU Input: AC 100-240V 50/60Hz 0.4A Output: 12.0V 1.0A CTA240429001-1# (Engineer sample), CTA240429001-2# (Normal sample)
E-UTRA Band 14

Support Bandwidth:

Band 14: 5MHz, 10MHz

TX/RXFrequency Range:

E-UTRA Band 14(788MHz-798 MHz)

Modulation Type:

QPSK, 16QAM

Release Version:

Release 9

Category:

Cat 4

Antenna Type:

External antenna

Antenna Gain:

Band 14: 9.255dBi

Note: For more details, refer to the user's manual of the EUT.

2.3 Description of Test Modes and Test Frequency

The EUT has been tested under typical operating condition. The CMW500 used to control the EUT staying in continuous transmitting and receiving mode for testing. Regards to the frequency band operation: the lowestmiddle and highest frequency of channel were selected to perform the test, then shown on this report.

2.4 Equipments Used during the Test

Test Equipment Manufacturer

Model No.

LISN

R&S

ENV216

LISN

R&S

ENV216

Equipment No.
CTA-308
CTA-314

Calibration Date
2023/08/02

Calibration Due Date
2024/08/01

2023/08/02 2024/08/01

Report No.: CTA24042900107

EMI Test Receiver

R&S

ESPI

EMI Test Receiver

R&S

ESCI

Spectrum Analyzer

Agilent

N9020A

Spectrum Analyzer

R&S

Vector Signal generator
Analog Signal Generator
Universal Radio Communication Temperature and humidity meter Ultra-Broadband
Antenna Horn Antenna
Loop Antenna
Horn Antenna

Agilent
R&S
CMW500
Chigo
Schwarzbeck Schwarzbeck
Zhinan Beijing Hangwei
Dayang

Amplifier

Schwarzbeck

FSP N5182A
SML03 R&S
ZG-7020 VULB9163 BBHA 9120D ZN30900C OBH100400 BBV 9745

Amplifier

Taiwan chengyi EMC051845B

Directional coupler

NARDA

4226-10

High-Pass Filter

XingBo

XBLBQ-GTA18

High-Pass Filter
Automated filter bank
Power Sensor

XingBo Tonscend
Agilent

XBLBQ-GTA27 JS0806-F U2021XA

Amplifier

Schwarzbeck

BBV9719

CTA-307 CTA-306 CTA-301 CTA-337 CTA-305
CTA-304 CTA-302 CTA-326 CTA-310 CTA-309 CTA-311 CTA-336 CTA-312 CTA-313 CTA-303 CTA-402 CTA-403 CTA-404 CTA-405 CTA-406

Page 7 of 13
2023/08/02 2024/08/01 2023/08/02 2024/08/01 2023/08/02 2024/08/01 2023/08/02 2024/08/01 2023/08/02 2024/08/01
2023/08/02 2024/08/01 2023/08/02 2024/08/01 2023/08/02 2024/08/01 2023/10/17 2024/10/16 2023/10/13 2024/10/12 2023/10/17 2024/10/16 2021/08/07 2024/08/06 2023/08/02 2024/08/01 2023/08/02 2024/08/01 2023/08/02 2024/08/01 2023/08/02 2024/08/01 2023/08/02 2024/08/01 2023/08/02 2024/08/01 2023/08/02 2024/08/01 2023/08/02 2024/08/01

Test Equipment Manufacturer

EMI Test Software EMI Test Software

Tonscend Tonscend

RF Test Software RF Test Software

Tonscend Tonscend

Model No. TS®JS32-RE TS®JS32-CE TS®JS1120-3 TS®JS1120

Version number 5.0.0.2
5.0.0.1
3.1.65
3.1.46

Calibration Date
N/A

Calibration Due Date
N/A

N/A

N/A

N/A

N/A

N/A

N/A

2.5 Related Submittal(s) / Grant (s) This submittal(s) (test report) is intended for filing to comply with of the FCC Part 27 Rules. 2.6 Modifications No modifications were implemented to meet testing criteria.

Report No.: CTA24042900107

Page 8 of 13

3 TEST CONDITIONS AND RESULTS
3.1 Output Power LIMIT

According to §90.542(6) specifies "Control stations and mobile stations transmitting in the 758-768 MHz band and the 788-798 MHz band are limited to 30 watts ERP."

TEST CONFIGURATION

Conducted Power Measurement

Radiated Power Measurement:
TEST PROCEDURE
Radiated Power Measurement: a) The EUT shall be placed at the specified height on a support, and in the position closest to
normal use as declared by provider. b) The test antenna shall be oriented initially for vertical polarization and shall be chosen to
correspond to the frequency of the transmitter c) The output of the test antenna shall be connected to the measuring receiver. d) The transmitter shall be switched on and the measuring receiver shall be tuned to the frequency
of the transmitter under test. e) The test antenna shall be raised and lowered through the specified range of height until a
maximum signal level is detected by the measuring receiver. f) The transmitter shall then be rotated through 360°in the horizontal plane, until the maximum
signal level is detected by the measuring receiver. g) The test antenna shall be raised and lowered again through the specified range of height until a
maximum signal level is detected by the measuring receiver. h) The maximum signal level detected by the measuring receiver shall be noted. i) The transmitter shall be replaced by a substitution antenna. j) The substitution antenna shall be orientated for vertical polarization and the length of the
substitution antenna shall be adjusted to correspond to the frequency of the transmitter.

Report No.: CTA24042900107

Page 9 of 13

k) The substitution antenna shall be connected to a calibrated signal generator. l) If necessary, the input attenuator setting of the measuring receiver shall be adjusted in order to
increase the sensitivity of the measuring receiver. m) The test antenna shall be raised and lowered through the specified range of height to ensure
that the maximum signal is received. n) The input signal to the substitution antenna shall be adjusted to the level that produces a level
detected by the measuring receiver, that is equal to the level noted while the transmitter radiated power was measured, corrected for the change of input attenuator setting of the measuring receiver. o) The measurement shall be repeated with the test antenna and the substitution antenna orientated for horizontal polarization. p) The measure of the effective radiated power is the larger of the two levels recorded at the input to the substitution antenna, corrected for gain of the substitution antenna if necessary. q) Test site anechoic chamber refer to ANSI C63.4.

TEST RESULTS

Radiated Measurement: Remark: 1. We were tested all RB Configuration refer 3GPP TS136 521 for each Channel Bandwidth of LTE
FDD Band 14; recorded worst case for each Channel Bandwidth of LTE FDD Band 14. 2. EIRP=PMea(dBm)-Pcl(dB)+PAg(dB)+Ga(dBi) 3. ERP = EIRP ­ 2.15dBi as EIRP by subtracting the gain of the dipole.

LTE FDD Band 14_Channel Bandwidth 5MHz_QPSK

Frequency (MHz)

PMea (dBm)

Pcl (dB)

Ga Antenna Gain(dB)

Correction (dB)

PAg (dB)

790.5 -17.93 2.41 8.25

2.15 36.73

793.0 -19.65 2.45 8.31

2.15 36.73

795.5 -17.07 2.46 8.34

2.15 36.73

ERP (dBm)
22.49 20.79 23.39

Limit (dBm)
44.77 44.77 44.77

Margin (dB)
-22.28 -23.98 -21.38

Polarization
V V V

LTE FDD Band 14_Channel Bandwidth 10MHz_QPSK

Frequency (MHz)

PMea (dBm)

Pcl (dB)

Ga Antenna Gain(dB)

Correction (dB)

PAg (dB)

793.0 -18.52 2.41 8.25

2.15 36.73

ERP (dBm)
21.90

Limit (dBm)
44.77

Margin (dB)
-22.87

Polarization V

LTE FDD Band 14_Channel Bandwidth 5MHz_16QAM

Frequency (MHz)

PMea (dBm)

Pcl (dB)

Ga Antenna Gain(dB)

Correction (dB)

PAg (dB)

790.5 -19.49 2.41 8.25

2.15 36.73

793.0 -19.79 2.45 8.31

2.15 36.73

795.5 -18.05 2.46 8.34

2.15 36.73

ERP (dBm)
20.93 20.65 22.41

Limit (dBm)
44.77 44.77 44.77

Margin (dB)
-23.84 -24.12 -22.36

Polarization
V V V

LTE FDD Band 14_Channel Bandwidth 10MHz_16QAM

Frequency (MHz)

PMea (dBm)

Pcl (dB)

Ga Antenna Gain(dB)

Correction (dB)

PAg (dB)

793.0 -19.31 2.41 8.25

2.15 36.73

ERP (dBm)
21.11

Limit (dBm)
44.77

Margin (dB)
-23.66

Polarization V

Report No.: CTA24042900107

Page 10 of 13

3.2 Spurious Emission
LIMIT
For operations in the 758-768 MHz and the 788-798 MHz bands, the power of any emission outside the licensee's frequency band(s) of operation shall be attenuated below the transmitter power (P) within the licensed band(s) of operation, measured in watts, in accordance with the following: (1) On all frequencies between 769-775 MHz and 799-805 MHz, by a factor not less than 76 + 10 log (P) dB in a 6.25 kHz band segment, for base and fixed stations. (2) On all frequencies between 769-775 MHz and 799-805 MHz, by a factor not less than 65 + 10 log (P) dB in a 6.25 kHz band segment, for mobile and portable stations. (3) On any frequency between 775-788 MHz, above 805 MHz, and below 758 MHz, by at least 43 + 10 log (P) dB. (4) Compliance with the provisions of paragraphs (e)(1) and (2) of this section is based on the use of measurement instrumentation such that the reading taken with any resolution bandwidth setting should be adjusted to indicate spectral energy in a 6.25 kHz segment.

TEST CONFIGURATION

Conducted Spurious Measurement:

Radiated Spurious Measurement:

Report No.: CTA24042900107

Page 11 of 13

TEST PROCEDURE
Radiated Spurious Measurement:
a. The EUT shall be placed at the specified height on a support, and in the position closest to normal use as declared by provider.
b. The test antenna shall be oriented initially for vertical polarization and shall be chosen to correspond to the frequency of the transmitter
c. The output of the test antenna shall be connected to the measuring receiver. d. The transmitter shall be switched on and the measuring receiver shall be tuned to the frequency
of the transmitter under test. e. The test antenna shall be raised and lowered through the specified range of height until a
maximum signal level is detected by the measuring receiver. f. The transmitter shall then be rotated through 360°in the horizontal plane, until the maximum
signal level is detected by the measuring receiver. g. The test antenna shall be raised and lowered again through the specified range of height until a
maximum signal level is detected by the measuring receiver. h. The maximum signal level detected by the measuring receiver shall be noted. i. The transmitter shall be replaced by a substitution antenna. j. The substitution antenna shall be orientated for vertical polarization and the length of the
substitution antenna shall be adjusted to correspond to the frequency of the transmitter. k. The substitution antenna shall be connected to a calibrated signal generator. l. If necessary, the input attenuator setting of the measuring receiver shall be adjusted in order to
increase the sensitivity of the measuring receiver. m. The test antenna shall be raised and lowered through the specified range of height to ensure
that the maximum signal is received. n. The input signal to the substitution antenna shall be adjusted to the level that produces a level
detected by the measuring receiver, that is equal to the level noted while the transmitter radiated power was measured, corrected for the change of input attenuator setting of the measuring receiver. o. The measurement shall be repeated with the test antenna and the substitution antenna orientated for horizontal polarization. p. The measure of the effective radiated power is the larger of the two levels recorded at the input to the substitution antenna, corrected for gain of the substitution antenna if necessary. q. The resolution bandwidth of the spectrum analyzer was set at 100 kHz for Part 22 and 1MHz for Part 24. The frequency range was checked up to 10th harmonic. r. Test site anechoic chamber refer to ANSI C63.
TEST RESULTS

Report No.: CTA24042900107

Page 12 of 13

Radiated Measurement:

Remark: 1. We were tested all RB Configuration refer 3GPP TS136 521 for each Channel Bandwidth of LTE FDD Band 14; recorded worst case for each Channel Bandwidth of LTE FDD Band 71 @ QPSK 2. EIRP=PMea(dBm)-Pcl(dB) +Ga(dBi) 3. We were not recorded other points as values lower than limits. 4. Margin = Limit - EIRP

LTE FDD Band 14_Channel Bandwidth 5MHz_QPSK_ Low Channel

Frequency PMea (MHz) (dBm)

Pcl (dB)

Ga Diatance Antenna
Gain(dB)

Peak EIRP (dBm)

Limit (dBm)

1581.00 -39.54 2.89

3.00

8.64 -33.79 -13.00

2371.50 -53.97 2.97

3.00

9.87 -47.07 -13.00

1581.00 -44.36 2.89

3.00

8.64 -38.61 -13.00

2371.50 -53.52 2.97

3.00

9.87 -46.62 -13.00

LTE FDD Band 14_Channel Bandwidth 5MHz_QPSK_ Middle Channel

Frequency PMea (MHz) (dBm)

Pcl (dB)

Ga Diatance Antenna
Gain(dB)

EIRP (dBm)

Limit (dBm)

1586.00 -42.25 2.89

3.00

8.64 -36.50 -13.00

2379.00 -52.51 2.97

3.00

9.87 -45.61 -13.00

1586.00 -45.83 2.89

3.00

8.64 -40.08 -13.00

2379.00 -53.07 2.97

3.00

9.87 -46.17 -13.00

LTE FDD Band 14_Channel Bandwidth 5MHz_QPSK_ High Channel

Frequency PMea (MHz) (dBm)

Pcl (dB)

Ga Diatance Antenna
Gain(dB)

EIRP (dBm)

Limit (dBm)

1591.00 -44.13 2.89

3.00

8.64 -38.38 -13.00

2386.50 -53.56 2.97

3.00

9.87 -46.66 -13.00

1591.00 -43.08 2.89

3.00

8.64 -37.33 -13.00

2386.50 -51.61 2.97

3.00

9.87 -44.71 -13.00

LTE FDD Band 14_Channel Bandwidth 10MHz_QPSK_ Middle Channel

Frequency PMea (MHz) (dBm)

Pcl (dB)

Ga Diatance Antenna
Gain(dB)

EIRP (dBm)

Limit (dBm)

1586.00 -39.72 2.89

3.00

8.64 -33.97 -13.00

2379.00 -50.37 2.97

3.00

9.87 -43.47 -13.00

1586.00 -42.15 2.89

3.00

8.64 -36.40 -13.00

2379.00 -52.47 2.97

3.00

9.87 -45.57 -13.00

Notes: 1.All channel bandwidth were tested,the report recorded the worst data. 2. EIRP=PMea(dBm)-Pcl(dB)+PAg(dB)+Ga(dBi) 3. ERP = EIRP ­ 2.15dBi as EIRP by subtracting the gain of the dipole. 4. Margin = EIRP ­ Limit 5. We measured all modes and only recorded the worst case.

Margin (dB)
-20.79 -34.07 -25.61 -33.62

Polarization
H H V V

Margin (dB)
-23.50 -32.61 -27.08 -33.17

Polarization
H H V V

Margin (dB)
-25.38 -33.66 -24.33 -31.71

Polarization
H H V V

Margin (dB)
-20.97 -30.47 -23.40 -32.57

Polarization
H H V V

Report No.: CTA24042900107
4 Test Setup Photos of the EUT

Page 13 of 13

5 Photos of the EUT
Reference to the test report No. CTA24042900101 ********************** End of Report **********************

Related FCC IDs:

Search Any Device: