Abhijit Potdar
PDF Copyright Information
Copyright Information. Copyright & trademark specifications are subject to change without prior notice. Copyright © 2018 Quantum Networks (SG) Pte. Ltd. All Rights Reserved. Quantum Networks & the...
Copyright Information
Abstract This document describes the LED status of Quantum Networks indoor and outdoor AP. The guide applies to QN-I-200, QN-I-220, QN-H-220, QN-I-270, QN-I-470 and QN-O-230 model
Access Points LED Scheme
Quantum Networks
Not Your Device? Search For Manuals or Datasheets below:
File Info : application/pdf, 6 Pages, 338.35KB
Document DEVICE REPORTAccessPointsLEDSchemeCopyright Information Copyright & trademark specifications are subject to change without prior notice. Copyright © 2018 Quantum Networks (SG) Pte. Ltd. All Rights Reserved. Quantum Networks® & the logo are trademarks of Quantum Networks (SG) Pte. Ltd. Other brands or products mentioned may be trademarks or registered trademarks of their respective owners. Mentioned contents of this document can't be used, translated or transmitted in any form or by any means without taking prior written permission from Quantum Networks (SG) Pte. Ltd. Document Abstract This document describes the LED status of Quantum Networks indoor and outdoor AP. The guide applies to QN-I-200, QN-I-220, QN-H-220, QN-I-270, QN-I-470 and QN-O-230 model only. Details of LED status on Quantum Networks Indoor AP QN-I-200 LED Count LED Status Condition 1 Green - On On: AP is Power on 2 Green - On On: AP is managed through Cloud Green - Off Off: AP is in standalone mode 3 Green - On On: AP is in Gateway mode Green - Off Off: AP is in Bridge mode 4 Green - On On: No traffic on 2.4GHz radio Green - Blinking Blinking: when traffic on 2.4GHz radio is active Green - Off Off : 2.4GHz radio is off 5 Green - On On: No traffic on 5 GHz radio Green - Blinking Blinking: when traffic on 5 GHz radio is active Green - Off Off: 5 GHz radio is off QN-I-220 LED Count LED Status Condition 1 Red , Green, Blue On: when AP is in Boot process or in Quick setup Blue Red - On: AP is in standalone mode Green On: AP is managed through Cloud and connected with Controller Green Blinking: AP is managed through Cloud but disconnected from Controller Red Blinking: Quick setup is completed and AP is updating with cloud configuration (while update is in process, please do not remove power source) QN-H-220 LED Count LED Status Condition 1 Red , Green, Blue On: when AP is in Boot process or in Quick setup Blue Red - On: AP is in standalone mode Green On: AP is managed through Cloud and connected with Controller Green Blinking: AP is managed through Cloud but disconnected from Controller Red Blinking: Quick setup is completed and AP is updating with cloud configuration (while update is in process, please do not remove power source) QN-I-270 LED Count LED Status Condition 1 Green - On On: No traffic on 2.4GHz radio Green - Blinking Blinking: when traffic on 2.4GHz radio is active Green - Off Off : 2.4GHz radio is off 2 Green - On On: No traffic on 5 GHz radio Green - Blinking Blinking: when traffic on 5 GHz radio is active Green - Off Off: 5 GHz radio is off 3 Green - On On: AP is Power on QN-I-470 LED Count LED Status Condition 1 Green - On On: AP is Power on 2 Green - On On: No traffic on 2.4GHz radio Green - Blinking Blinking: when traffic on 2.4GHz radio is active Green - Off Off : 2.4GHz radio is off 3 Green - On On: No traffic on 5 GHz radio Green - Blinking Blinking: when traffic on 5 GHz radio is active Green - Off Off: 5 GHz radio is off 4 Green - On On: WAN cable connected Details of LED status on Quantum Networks Outdoor AP QN-O-230 LED Count LED Status 1 Green - On Green - Off 2 Green - On Green - Off 3 Green - On Green - Off 4 Off 5 Green - On Condition On: No traffic on 5 GHz radio Off: 5 GHz radio is off On: No traffic on 2.4GHz radio Off: 2.4GHz radio is off On: WAN (ETH / SFP) is connected Off: WAN (ETH / SFP) is not connected System On: AP is Power onMicrosoft Office Word 2007 Microsoft Office Word 2007