RF Exposure Report
Panasonic Corporation of North America 932AT1906 Display Audio ACJ932AT1906 ACJ932AT1906 932at1906
Not Your Device? Search For Manuals or Datasheets below:
File Info : application/pdf, 6 Pages, 261.61KB
Document DEVICE REPORTGetApplicationAttachment.html?id=4661309RF Exposure Report Report No.: SA191108C22 FCC ID: ACJ932AT1906 Test Model: AT1906 Received Date: Nov. 08, 2019 Date of Evaluation: Feb. 10, 2020 Issued Date: Feb. 12, 2020 Applicant: Panasonic Corporation of North America Address: Two Riverfront Plaza, 9th Floor Newark New Jersey United States 07102-5490 Manufacture: Panasonic Automotive Systems Asia Pacific Co., Ltd. Manufacture's Address: 101 Moo 2 Teparak Rd., T. Bangsaothong,A. Bangsaothong, Samutprakarn 10570 Thailand Factory: Panasonic Automotive Systems Asia Pacific Co., Ltd. Factory's Address: 101 Moo 2 Teparak Rd., T. Bangsaothong,A. Bangsaothong, Samutprakarn 10570 Thailand Issued By: Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch Lin Kou Laboratories Lab Address: No. 47-2, 14th Ling, Chia Pau Vil., Lin Kou Dist., New Taipei City, Taiwan Test Location: No. 19, Hwa Ya 2nd Rd., Wen Hwa Vil., Kwei Shan Dist., Taoyuan City 33383, TAIWAN FCC Registration / 788550 / TW0003 Designation Number: This report is for your exclusive use. Any copying or replication of this report to or for any other person or entity, or use of our name or trademark, is permitted only with our prior written permission. This report sets forth our findings solely with respect to the test samples identified herein. The results set forth in this report are not indicative or representative of the quality or characteristics of the lot from which a test sample was taken or any similar or identical product unless specifically and expressly noted. Our report includes all of the tests requested by you and the results thereof based upon the information that you provided to us. You have 60 days from date of issuance of this report to notify us of any material error or omission caused by our negligence, provided, however, that such notice shall be in writing and shall specifically address the issue you wish to raise. A failure to raise such issue within the prescribed time shall constitute your unqualified acceptance of the completeness of this report, the tests conducted and the correctness of the report contents. Unless specific mention, the uncertainty of measurement has been explicitly taken into account to declare the compliance or non-compliance to the specification. The report must not be used by the client to claim product certification, approval, or endorsement by TAF or any government agencies. Report No.: SA191108C22 Page No. 1 / 6 Report Format Version: 6.1.1 Table of Contents Release Control Record .................................................................................................................................. 3 1 Certificate of Conformity...................................................................................................................... 4 2 RF Exposure .......................................................................................................................................... 5 2.1 Limits for Maximum Permissible Exposure (MPE) .............................................................................. 5 2.2 MPE Calculation Formula ................................................................................................................... 5 2.3 Classification ....................................................................................................................................... 5 2.4 Calculation Result of Maximum Conducted Power ............................................................................. 6 Report No.: SA191108C22 Page No. 2 / 6 Report Format Version: 6.1.1 Issue No. SA191108C22 Release Control Record Description Original Release Date Issued Feb. 12, 2020 Report No.: SA191108C22 Page No. 3 / 6 Report Format Version: 6.1.1 1 Certificate of Conformity Product: Display Audio Brand: Panasonic Test Model: AT1906 Sample Status: Engineering Sample Applicant: Panasonic Corporation of North America Date of Evaluation: Feb. 10, 2020 Standards: FCC Part 2 (Section 2.1091) References Test KDB 447498 D01 General RF Exposure Guidance v06 Guidance : IEEE C95.3 -2002 The above equipment has been tested by Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch, and found compliance with the requirement of the above standards. The test record, data evaluation & Equipment Under Test (EUT) configurations represented herein are true and accurate accounts of the measurements of the sample's RF characteristics under the conditions specified in this report. Prepared by : Gina Liu / Specialist , Date: Feb. 12, 2020 Approved by : , Date: Dylan Chiou / Senior Project Engineer Feb. 12, 2020 Report No.: SA191108C22 Page No. 4 / 6 Report Format Version: 6.1.1 2 RF Exposure 2.1 Limits for Maximum Permissible Exposure (MPE) Frequency Range (MHz) Electric Field Strength (V/m) Magnetic Field Strength (A/m) Power Density (mW/cm2) Limits For General Population / Uncontrolled Exposure 0.3-1.34 1.34-30 614 824/f 1.63 2.19/f (100)* (180/f2)* 30-300 27.5 0.073 0.2 300-1500 ... ... f/1500 1500-100,000 ... ... 1.0 f = Frequency in MHz ; *Plane-wave equivalent power density Average Time (minutes) 30 30 30 30 30 2.2 MPE Calculation Formula Pd = (Pout*G) / (4*pi*r2) where Pd = power density in mW/cm2 Pout = output power to antenna in mW G = gain of antenna in linear scale pi = 3.1416 r = distance between observation point and center of the radiator in cm 2.3 Classification The antenna of this product, under normal use condition, is at least 20cm away from the body of the user. So, this device is classified as Mobile Device. Report No.: SA191108C22 Page No. 5 / 6 Report Format Version: 6.1.1 2.4 Calculation Result of Maximum Conducted Power Band WLAN Frequency Band (MHz) 2412-2462 Max Power (dBm) 16.51 Antenna Gain (dBi) 3.4 Distance (cm) 20 Power Density (mW/cm2) 0.019 Limit (mW/cm2) 1.00 5725-5825 13.30 3.4 20 0.009 1.00 BT 2402-2480 -1.56 3.4 20 0.000 1.00 Note: 1. Determining compliance based on the results of the compliance measurement, not taking into account measurement instrumentation uncertainty. Conclusion: The formula of calculated the MPE is: CPD1 / LPD1 + CPD2 / LPD2 + ......etc. < 1 CPD = Calculation power density LPD = Limit of power density WLAN 2.4GHz + WLAN 5GHz = 0.019/1 + 0.009/1 = 0.028 Therefore the maximum calculations of above situations are less than the "1" limit. --- END --- Report No.: SA191108C22 Page No. 6 / 6 Report Format Version: 6.1.1
Related FCC IDs:
- ACJ932AT1906 - Panasonic Corporation of North America Display Audio [932AT1906] Microsoft Word 2013 Microsoft Word 2013