Ortech Industries
Instruction Manual
PUK M3G
Not Your Device? Search For Manuals or Datasheets below:
File Info : application/pdf, 1 Pages, 1.15MB
Document DEVICE REPORT
✖
LED Puk Lights MODEL PUK M3G Instruction Manual WARNING WARNING -- THE INSTALLATION MUST BE CARRIED OUT BY A QUALIFIED ELECTRICIAN. 1. LED Puk Lights are suitable for using in damp locations 2. Please keep the LED Puk Lights away from any corrosive substance, and please use dry cloth when you clean it 3. LED Puk Lights can only be installed by a qualified electrician 4. Before installation or maintenance, please disconnect the power to prevent electric shock Application Notice 1. Before installation, cut off the power supply at the electrical panel CAUTION PLEASE READ INSTRUCTION BEFORE COMMENCING INSTALLATION AND RETAIN FOR FUTURE REFERENCES. Electrical products can cause death or injury, or damage to property. If in any doubt about the installation or use of this product, consult a competent electrician. INSTALLATION GUIDE 1. Cut a 2.1" (55 mm) hole in the suitable position 2. Connect the wires on the light to the power supply, RED wire to positive (+) wire, BLACK wire to the negative (-) wire 3. Insert the LED Puk Light into the cut hole. Once assembly is complete, turn the power ON to ensure the fixture is operating properly To AC DC Power Supply [email protected] www.ortechindustries.ca ORTECH reserves the right to modify at any time, without notice, any or all of our product's features, designs, components and specifications to meet market changes. 13376 Comber Way Surrey BC V3W 5V9 205 Summerlea Rd Brampton, ON L6T 4E5 1-888-543-6473 1-888-541-6474Adobe InDesign CC 2015 (Macintosh) Adobe PDF Library 15.0