Elma Instruments
CAPBs - systronik.com
www.systronik.com 7 Article module device Part no. CAPBs interface basic M094 00 39 10 Charging and data cable USB-A on USB-C, length: 1 m 524697 Power supply unit USA / EURO / AU / UK, 5W 523493 Charger inclusive 2x AAA rechargeable batteries 524215
Not Your Device? Search For Manuals or Datasheets below:
File Info : application/pdf, 36 Pages, 5.69MB
Document DEVICE REPORT
✖
BlueLine® CAPBs® Modular system 2 www.systronik.com Contents CAPBs® module 6 CAPBs® device 6 Accessories 7 Sets 7 EuroSoft® live app 8 Pressure CAPBs® sens PS 9 Accessories 13 Sets 14 Pressure transmitter CAPBs® sens PT 15 Accessories 17 Sets 19 Pressure & temperature CAPBs® sens FP 20 Accessories 20 Temperature CAPBs® sens TK 21 Accessories 22 Air temperature & humidity CAPBs® sens RH 26 Accessories 26 Air quality CAPBs® sens AQ 27 Accessories 28 CO detection CAPBs® sens CO 29 Gas sniffer CAPBs® sens GS 29 Water quality CAPBs® sens WQ 30 Accessories 31 Sets 32 Volume flow & temperature FlowTemp® STx 33 www.systronik.com 3 Universal. Accurate. Flexible. Practical modularity with the CAPBs® module and the CAPBs® device The CAPBs® constitute a modular system consisting of the universal handles CAPBs® module or CAPBs® device and an application-specific sensor unit CAPBs® sens for a wide variety of measured variables such as pressure, temperature, air quality or water quality. According to the ,,plug & play" principle, the sensor units are inserted into the handles, thus combining them into a complete ready-to-use measuring instrument. The measured values can be transferred via the free EuroSoft® live app on a tablet or smartphone. In this way, for example, all the tasks of a heating system engineer or a chimney sweeper can be performed with a single measuring instrument. Both the CAPBs® module and the CAPBs® device are equipped with magnets and unlock buttons for exchanging the CAPBs® sens at the rear side. The snap-in mechanism on top respectively on bottom of the CAPBs® device is standardised for all CAPBs® sens. The multicolour LED indicates the status of the CAPBs® measuring units by means of different colours and flashing frequencies. Furthermore the handles contain a beeper which indicates excess concentrations or limit values by means of audible signals with different frequencies. 4 www.systronik.com CAPBs®module CAPBs®device CAPBs® online www.systronik.com 5 CAPBs®module Base handle Description Universal base handle for all CAPBs® sensor units. Ergonomic handle with three magnets and battery compartment at the rear of the housing. Multicolour LED and multi-purpose key on the front. With Bluetooth® Smart to transfer the sensor values and integrated beeper for audible signals. Technical specifications Dimensions HxWxD Interface Power supply Part no. 140 x 45 x 39 mm Bluetooth® Smart 2x AAA alkaline batteries or 2x AAA rechargeable batteries M091 00 00 17 CAPBs®device Display handle Description Modular display unit for all CAPBs® sens. The sensors can either be installed on top or bottom side. The 2.4" screen shows directly the measured values of the installed CAPBs sensor. Via the CAPBs® device QR code generator the values could be transferred to the EuroSoft® live app to create professional measurement reports. The instrument is equipped with three navigation keys, magnets at the rear of the housing and a integrated beeper for audible signals. Technical specifications Dimensions HxWxD Display Interface Power supply Mains operation Part no. 155 x 62 x 42 mm 2.4" TFT QR code Rechargeable lithium-ion battery USB mains unit M093 00 00 10 6 www.systronik.com Accessories CAPBs® module & device Article CAPBs® interface basic Charging and data cable USB-A on USB-C, length: 1 m Power supply unit USA/EURO/AU/UK, 5W Charger inclusive 2x AAA rechargeable batteries 2x AAA rechargeable batteries NiMH 1.2 V/800 mAh Box for CAPBs® device with inlay i-Boxx with inlay module device Part no. M094 00 39 10 524697 523493 524215 524216 524740 500905 CAPBs® device basic set P00052 Application The CAPBs® device is a display unit for all CAPBs® sens. Various CAPBs® sens allows to measure pressure, differential pressure, flow, temperature, humidity, air quality, water quality, indoor air quality as well as detect gas leakage. Scope of delivery CAPBs® device with cover cap CAPBs® interface basic Data cable USB mains unit Box Compatibility For all CAPBs® sens and CAPBs® interface www.systronik.com 7 EuroSoft® live app for iOS and Android Description EuroSoft® live is the free app for communication between the CAPBs® systems and mobile devices (tablet or smartphone) via Bluetooth® Smart or QR code. Measurement results can be conveniently visualised, stored in measurement reports and transmitted via the standard communication capabilities, such as email, WhatsApp, cloud services. Ideal for professional, comprehensive documentation of results for customers. Application CAPBs® device Transfer of measurement values Application CAPBs® module "Remote control" of the sensor units Live indication of the measured values Logging of measurement data Visualization in diagrams CAPBs®device QR Code CAPBs® device Measurement Protocol Service Company Company: Name: Forename: Street: City: Phone: Fax: E-Mail: Web: SYSTRONIK GmbH Mustermann Max Musterstrasse 1 12345 Musterstadt 12345/67890 12345/09876 [email protected] www.homepage.de Customer Customer: Name: Forename: Street: City: Phone: Fax: E-Mail: Web: Customer Name Forename Customerstreet 1 56789 Customercity 09876/54321 09876/12345 [email protected] www.customer.de Location Building: 2a Apartment: 1a Floor: 4 Room: 1 Heat generator: Additional information: Burnermanufactor Gaspipe Testing device information Device: Firmware version: CAPBS DEVICE 3.01.0 Measurements Leakage Measurement S/N: PS20-9BB03 Pressure-Start: 150.2 hPa Settling time: 10:00 mm:ss Measurement time: 10:00 mm:ss Pressure-End: 148.4 hPa Pressure-Difference: 1.80 hPa Forename: Name: Street: City: Ownername Owner Ownerstreet 12345 Ownercity Serial: Firmware date: DV30-00001 MAR 24 2020 3/26/20 1:41 26.03.2020 13:56 1 EuroSoft® live app CAPBs®module 8 www.systronik.com Download app CAPBs®sens PS10 Pressure range 20 mbar Description Sensor unit for measurement of pressure, vacuum and differential pressure of non-corrosive, gaseous, dry media. Manual correction of the zero point allows to double the measuring range. The high quality sensors are extremely accurate, orientation independent and temperature-compensated. Application Measurement of ultra-fine pressure Air flow measurement Technical specifications Dimensions HxWxD Measuring range Accuracy Resolution Hose connection Part no. 74 x 42 x 35 mm -20 / +20 mbar ±0.003 mbar or 0.5 % RDG ±1 digit 0.001 mbar Ø 8 mm M090 05 01 10 0.5 / 50 m/s ±3 m/s 0.1 m/s Pitot CAPBs®sens PS20 Pressure range 180 mbar Description Sensor unit for measurement of pressure, vacuum and differential pressure of non-corrosive, gaseous, dry media. Manual correction of the zero point allows to double the measuring range. The high quality sensors are extremely accurate, orientation independent and temperaturecompensated. Application Check of connection and flow pressure in gas-fired heating systems Air flow measurement (*only with CAPBs® module) Technical specifications Dimensions HxWxD Measuring range Accuracy Resolution Hose connection Part no. 74 x 42 x 35 mm -180 / +180 mbar ±0.003 mbar or 0.5 % RDG ±1 digit 0.01 mbar (< 99.99) 0.1 mbar (> 100.0) Ø 8 mm M090 01 01 10 0.5 / 50 m/s* ± 0.8 m/s* 0.1 m/s* Pitot www.systronik.com 9 CAPBs®sens PS22 Pressure range 180 mbar Description Sensor unit for measurement of pressure and vacuum of non-corrosive, gaseous, dry media. Manual correction of the zero point allows to double the measuring range. The high quality sensors are extremely accurate, orientation independent and temperature-compensated. Application Check of connection and flow pressure in gas fired heating systems Tightness test of gas lines Technical specifications Dimensions HxWxD Measuring range Accuracy Resolution Hose connection Part no. 89 x 42 x 35 mm 0 / +180 mbar ±0.03 mbar or 0.5 % RDG ±1 digit 0.01 mbar (< 99.99) 0.1 mbar (> 100.0) Pressure test valve M090 01 34 10 10 www.systronik.com CAPBs®sens PS33 Pressure range 2 bar Description Sensor unit for measurement of pressure and vacuum of non-corrosive, gaseous, dry media. The high quality sensors are extremely accurate, orientation independent and temperaturecompensated. Application Leak tightness checks of gas pipes according to TRGI 2018 Sensor features barometric pressure determination Tightness and load test of gas lines, water pipes or other systems Extremely accurate and DVGW-compliant measuring results Technical specifications Dimensions HxWxD Measuring range Accuracy Resolution Hose connection Part no. 74 x 42 x 35 mm -1 / +2 bar ±0.3 mbar or 0.5 % RDG ±1 digit 0.1 mbar (< 999.99) 1 mbar (> 1,000) Ø 8 mm M090 19 29 10 www.systronik.com 11 CAPBs®sens PS40/41/42 Pressure range 6 bar Description Sensor unit for measurement of pressure, vacuum of non-corrosive, gaseous, dry media. The high quality sensors are extremely accurate, orientation independent and temperaturecompensated. Application Tightness and load test of gas lines, water pipes or other systems Technical specifications Dimensions HxWxD Measuring range Accuracy Resolution Hose connection Part no. 74 x 42 x 35 mm -1 / +6 bar ±0.3 mbar or 0.5 % RDG ±1 digit 0.1 mbar (< 999.99) 1 mbar (> 1,000) Ø 8 mm Ø 3 mm (Festo) M090 08 29 10 M090 08 30 10 Pressure test valve M090 08 34 10 Application video CAPBs®sens PS60/61/62 Pressure range 20 bar Description Sensor unit for measurement of pressure, vacuum of non-corrosive, gaseous, dry media. The high quality sensors are extremely accurate, orientation independent and temperaturecompensated. Application Tightness and load test of gas lines, water pipes or other systems Technical specifications Dimensions HxWxD Measuring range Accuracy Resolution Hose connection Part no. 74 x 42 x 35 mm -1 / +20 bar ±1 mbar or 0.5 % RDG ±1 digit 0.1 mbar (< 999.99) 1 mbar (> 1,000) Ø 8 mm Ø 3 mm (Festo) M090 10 29 10 M090 10 30 10 Pressure test valve M090 10 34 10 12 www.systronik.com Accessories Pressure Article Connection set for differential pressure measurement High pressure hose set D3 to G1/8", 15 bar, length: 1 m Pressure test valve Pumpball with connection hose, length: 0.5 m Syringe for test volume, 100 ml, scaling 2 ml Connection hose with plug-in nipple DN2.7 and coupling DN5, length: 1 m Pitot-pipe 360 mm and connectors 2x D7, tube length: 1.5 m Pitot-pipe 460 mm and connectors 2x D7, tube length: 1.5 m Conical test plug 1/2" - 3/4" with connector DN5 Conical test plug 3/4" - 11/4" with connector DN5 Cylindrical test plug 1/2" with connector DN5 Cylindrical test plug 3/4" with connector DN5 Cylindrical test plug 1" with connector DN5 Cylindrical test plug 11/4" with connector DN5 Test cap 3/8" with connector DN5 Test cap 1/2" with connector DN5 Test cap 3/4" with connector DN5 Test cap 1" with connector DN5 Stage stop plug 3/8" and 3/4" with connector DN5 Stage stop plug 1/2" and 1" with connector DN5 Stage stop plug 11/4" with connector DN5 PS10 PS20 PS22 PS33 PS35 PS40 PS41 PS42 PS60 PS61 PS62 Part no. 500237 500234 500670 511018 523174 500685 500238 500238.1 500678.1 500678.2 500678.3 500678.4 500678.5 500678.6 511171 511172 511173 511174 500679.1 500679.2 500679.3 www.systronik.com 13 14 www.systronik.com Low pressure set P00025 Application For device connection D8mm up to 1 bar test pressure. For measuring pressure and vacuum, inlet pressure, flow pressure, static pressure and nozzle pressure. Suitable for tightness and load test of gas lines, water pipes or other systems. Scope of delivery Pumpball with connection hose Pressure test valve with quick-action coupling and high-precision adjustment valve for easy adjustment of the filling pressure 2x conical test plugs for pipe diameter ½" to 1¼" with plug-in nipple Connection hose with plug-in nipple DN2.7 and coupling DN5 Compatibility CAPBs® sens PS20 CAPBs® sens PS40 High pressure set D8 P00026 Application For device connection D8mm up to 18 bar test pressure. For measuring pressure and vacuum, inlet pressure, flow pressure, static pressure and nozzle pressure. Suitable for tightness and load test of gas lines, water pipes or other systems. Scope of delivery Pressure test valve with quick-action coupling and high-precision adjustment valve 2x multiple connection plugs for connection thread 3/8" ¾" and ½" 1" with plug-in nipple Filling hose (0.2 m) ADV for compressor connection Connection hose with plug-in nipple DN2.7 and coupling DN5 Compatibility CAPBs® sens PS40 CAPBs® sens PS60 CAPBs®sens PT70 Pressure transmitter Description Pressure transmitter for measurements in liquids and gaseous media. Application Pressure tests of oil pipes Tightness tests/strength tests of drinking water installations Tightness and load test of gas lines, water pipes or other systems Pressure test at pipe systems Stress pressure test at pipe systems Technical specifications Dimensions HxWxD Measuring range Accuracy Resolution Hose connection Part no. 76 x 42 x 35 mm 0 / +25 bar 0.5 % of full scale ±1 digit 0.1 bar Plug connection DN5 M090 14 28 10 www.systronik.com 15 CAPBs®sens PT85 Pressure transmitter Description Sensor unit for measurement of pressure, vacuum and differential pressure of liquids and gaseous media. High quality sensor with wide measurement range and high accuracy. Application Tightness and load test, strength test of gas lines, water pipes or other systems Pressure tests of oil lines Stress pressure tests at pipe systems Hydraulic balancing at thermostatic valve Technical specifications Dimensions HxWxD Measuring range Accuracy Resolution Hose connection Part no. 80 x 42 x 35 mm 7 bar ±10 hPa or 1 % RDG 0.1 hPa (< 999.99) 1 hPa (> 1,000) 2x plug-in nipple DN2.7 M090 22 35 10 CAPBs®sens PT86 Pressure transmitter Description Sensor unit for measurement of pressure, vacuum and differential pressure of liquids and gaseous media. High quality sensor with wide measurement range and high accuracy. Technical specifications Dimensions HxWxD Measuring range Accuracy Resolution Hose connection Part no. 99 x 42 x 35 mm 20 bar ±25 hPa or 1 % RDG 1 hPa 2x coupling DN2.7 M090 27 35 10 Application Tightness and load test, strength test of gas lines, water pipes or other systems Pressure tests of oil lines Stress pressure tests at pipe systems Adjustment of balancing valves 16 www.systronik.com Measuring needle Accessories Pressure transmitter Article T-connector with 2x coupling, 1x plug-in nipple and shut-off valve Adapter for compressor connection, with coupling DN5 and plug-in nipple DN7.2 Test plug 1/2" with connector DN5 Conical test plug 1/2" - 3/4" with connector DN5 Conical test plug 3/4" - 11/4" with connector DN5 Cylindrical test plug 1/2" with connector DN5 Cylindrical test plug 3/4" with connector DN5 Cylindrical test plug 1" with connector DN5 Cylindrical test plug 11/4" with connector DN5 Test cap 3/8" with connector DN5 Test cap 1/2" with connector DN5 Test cap 3/4" with connector DN5 Test cap 1" with connector DN5 Stage stop plug 3/8" and 3/4" with connector DN5 Stage stop plug 1/2" and 1" with connector DN5 Stage stop plug 11/4" with connector DN5 PT70 PT85 PT86 Part no. 511182 500695 500696 500694 500678.1 500678.2 500678.3 500678.4 500678.5 500678.6 511171 511172 511173 511174 500679.1 500679.2 500679.3 www.systronik.com 17 Accessories Pressure transmitter Article Connection hose with 2x coupling DN5, length: 1.2 m Connection hose with plug-in nipple DN5 and coupling DN5, length: 0.3 m Connection hose red with coupling DN2.7 and DN5, length: 1.5 m Connection hose blue with coupling DN2.7 and DN5, length: 1.5 m Connection hose with plug-in nipple DN5 and coupling DN2.7, length: 0.3 m Connection hose with plug-in nipple DN2.7 and coupling DN5, length: 1 m Connection hose with plug-in nipple DN5 and DN2.7, length: 0.3 m Connection hose blue with plug-in nipple DN2.7 and coupling DN5, length: 1.5 m Connection hose red with plug-in nipple DN2.7 and coupling DN5, length: 1.5 m PT70 PT85 PT86 Part no. 500686.2 500687 511176 511177 511156.1 500685 511184.1 500685.1 500685.2 18 www.systronik.com Tightness test set PT70 P00040 Application For measuring pressure and vacuum, inlet pressure, flow pressure, static pressure and nozzle pressure. Suitable for tightness, load test and strength tests of drinking water installations, pressure tests of oil lines and stress pressure tests at pipe systems. Scope of delivery CAPBs® sens PT70 T-connector Adapter for compressor connection Connection hose with coupling DN5 and plug-in nipple DN5 Test cap 3/4" with connector DN5 L-Boxx mini with foam Tightness test set PT85 P00043 Application For measuring pressure and vacuum, inlet pressure, flow pressure, static pressure and nozzle pressure. Suitable for tightness and strength tests of drinking water installations and gas pipes, pressure tests of oil lines and stress pressure tests at pipe systems. Scope of delivery CAPBs® sens PT85 T-connector Adapter for compressor connection Connection hose with plug-in nipple DN5 and coupling DN5 Connection hose with plug-in nipple DN5 and coupling DN2.7 Silicon connection hose Test cap 3/4" with connector DN5 i-Boxx with inlay www.systronik.com 19 CAPBs®sens FP10 Pressure & temperature Description Sensor unit for simultaneous, continuous measurement of temperature and pressure. The CAPBs® sens FP10 allows for convenient flow rate measurement with a stable zero point. Application Air flow measurement (Pitot tube) 4Pa measurement (hose kit) (only with CAPBs® module) Technical specifications Dimensions HxWxD Measuring range Accuracy Resolution Part no. 74 x 42 x 35 mm -20 / +20 mbar ±0.003 mbar or 0.5 % RDG ±1 digit 0.0001 mbar M090 05 32 10 0.2 / 20 m/s ±0.1 m/s or ±5 % RDG 0.01 m/s -50 / +600 °C ±1.5 °C 0.1 °C Pitot pipe 165 mm, D8 with cone Hose kit 4Pa test, length: 4 m Surface temperature sensor micro type K Article Pitot Temperature Part no. 500663 500664 522991 20 www.systronik.com CAPBs®sens TK10 Temperature type K Description Temperature transmitter with standardised temperature socket type K. This allows for the connection of all type K two-pole thermocouples and temperature probes (for example, the complete temperature probe range). Application Temperature measurement Technical specifications Dimensions HxWxD Measuring range Accuracy Resolution Connection Part no. 58 x 42 x 35 mm -50 / +1,150 °C (depends on thermocouple used) ±1.5 °C 0.1 °C Probe: 1x type K M090 00 08 10 CAPBs®sens TK11 Temperature type K Description Temperature transmitter with two standardised temperature sockets type K. This allows for the connection of all type K two-pole thermocouples and temperature probes (for example, the complete temperature probe range). In conjunction with BLUELYZER® ST, it is, for example, possible to measure up to four temperature values. Application Temperature measurement Differential temperature measurement Determination of the temperatures of flow and return Technical specifications Dimensions HxWxD Measuring range Accuracy Resolution Connection Part no. 58 x 42 x 35 mm -50 / +1,150 °C (depends on thermocouple used) ±1.5 °C 0.1 °C Probe: 2x type K M090 00 09 10 www.systronik.com 21 Accessories TK10 & TK11 Article Temperature surface probe to 450 °C, type K Temperature penetration probe to 600 °C, type K Temperature liquid/gas probe to 900 °C, type K Clamp probe for pipes <D36 mm, max. 120 °C, type K Air sensor 20 mm with magnet, type K, length: 2.5 m Air sensor 20 mm with cone, type K, length: 2.5 m Air sensor 80 mm with cone, type K, length: 2.5 m Air sensor 80 mm with magnet and cone, type K, EN50379, length: 2.5 m Air sensor 200 mm with cone, D5, type K Air sensor, type K TK10 TK11 Part no. 523033 523034 523035 511098 500141 500141.4 500141.0 500141.1 500147 521844 22 www.systronik.com CAPBs®sens TK20 Temperature Description Penetration probe for measurement of the temperature in liquids and soft plastic media. Technical specifications Dimensions HxWxD Probe diameter Measuring range Accuracy Resolution Part no. 42 x 186 x 35 mm 3 mm -50 / +400 °C ±1.5 °C or 1 % RDG 0.1 °C M090 00 22 10 Application Temperature measurement CAPBs®sens TK30 Temperature Description Liquid probe for measurement of the temperature in liquids. Application Temperature measurement Technical specifications Dimensions HxWxD Probe diameter Measuring range Accuracy Resolution Part no. 42 x 187 x 35 mm 1.5 mm -50 / +400 °C ±1.5 °C or 1 % RDG 0.1 °C M090 00 23 10 www.systronik.com 23 CAPBs®sens TK35 Temperature Description Liquid probe for measurement of the temperature in liquids. Application Temperature measurement Technical specifications Dimensions HxWxD Probe diameter Measuring range Accuracy Resolution Part no. 190 x 42 x 35 mm 3 mm -50 / +400 °C ±1.5 °C or 1 % RDG 0.1 °C M090 00 24 10 CAPBs®sens TK40 Temperature Description Air probe for measurement of the temperature in air. Technical specifications Dimensions HxWxD Probe diameter Measuring range Accuracy Resolution Part no. 187 x 42 x 35 mm 4.7 mm -50 / +400 °C ±1.5 °C or 1 % RDG 0.1 °C M090 00 25 10 Application Temperature measurement 24 www.systronik.com CAPBs®sens TK50 Temperature Description Surface probe for measurement of the temperature on surfaces. Technical specifications Dimensions HxWxD Probe diameter Measuring range Accuracy Resolution Part no. 187 x 42 x 35 mm 4 mm -50 / +400 °C ±1.5 °C or 1 % RDG 0.1 °C M090 00 26 10 Application Temperature measurement www.systronik.com 25 CAPBs®sens RH80 Air temperature & humitidy Description Sensor unit for measurement of temperature and relative humidity in ambient air. Calculation of absolute humidity and dew point temperature. Application Checks of the climatic conditions in rooms Mould prevention Evaluation of the indoor air quality (IAQ) Technical specifications Dimensions HxWxD Measuring range Accuracy Resolution Part no. 82 x 42 x 35 mm 0 / 100 % r.h. ±2 % r.h. ±1 digit 0.1 % r.h. M090 11 12 10 -40 / +80 °C ±0.5 °C ±1 digit 0.1 °C Temperature Accessories CAPBs® sens RH80 Article Humidity and temperature sensor GK2 Part no. 511106 26 www.systronik.com CAPBs®sens AQ20 Air quality Description Sensor unit for fast and reliable detection of VOCs (volatile organic compounds) and CO2 in ambient air. The gas concentration is displayed by the evaluation unit as CO2 (ppm) and TVOC (ppb); the CAPBs® measurement unit provides an audible signal. Application Monitor of the air quality in rooms Inspection of filters Detection of leaks in conjunction with hazardous substances Redundant measurement in conjunction with PID measurements Technical specifications Dimensions HxWxD Measuring range Resolution Part no. 58 x 42 x 35 mm 450 / 2,000 ppm CO2 equivalent 1 ppm M090 12 00 10 125 / 600 ppb TVOC equivalent CAPBs®sens AQ35 Air quality Description Sensor unit for measurement of carbon dioxide. The highly accurate CO2 infrared sensor has a very low drift; it can be adjusted in fresh air. Thanks to the possibility to conveniently enter the measuring time, it is possible to check and document given CO2 mean values. Technical specifications Dimensions HxWxD Measuring range Accuracy Resolution Part no. 83 x 42 x 35 mm 0 / 10,000 ppm CO2 ±70 ppm or +3 % RDG 1 ppm M090 23 00 10 Application CO2 concentration measurement Assessment of the ambient air quality in rooms For adjustment of ventilation and air conditioning systems as per EN 13779 or TRGS 900 (limit values for workplaces) Evaluation of the CO2 in closed rooms (e.g. in schools, offices, conference rooms, libraries etc.) www.systronik.com 27 CAPBs®sens AQ36 Air quality Description Sensor unit for measurement of carbon dioxide, humidity and temperature. The highly accurate CO2 infrared sensor has a very low drift; it can be adjusted in fresh air. Thanks to the possibility to conveniently enter the measuring time, it is possible to check and document given CO2 mean values. Technical specifications Dimensions HxWxD Measuring range Accuracy Resolution Part no. 115 x 42 x 35 mm 0 / 10,000 ppm CO2 ±70 ppm +3 % RDG 1 ppm M090 26 00 10 Application CO2 concentration, humidity and temperature measurement Indoor air quality (IAQ) measurements Assessment of the ambient air quality in rooms For adjustment of ventilation and air conditioning systems as per EN 13779 or TRGS 900 (limit values for workplaces) Evaluation of the air quality in closed rooms (e.g. in schools, offices, conference rooms, libraries etc.) Relative humidity Temperature 0 / 100 % r.h. ±3 % r.h. (at 25°C) 0.1 % r.h. -40 / +125 °C ±2 °C 0.1 °C Accessories CAPBs® sens AQ36 Article Humidity and temperature sensor GK3 Part no. 511105 28 www.systronik.com CAPBs®sens CO30 CO detection Description Sensor unit with electro-chemical sensor for fast and reliable detection of CO (carbon monoxide) in ambient air. The CO concentration is displayed by the evaluation unit as CO value in ppm; the CAPBs® measurement unit provides an audible signal when the alarm threshold is exceeded. Technical specifications Dimensions HxWxD Measuring range Resolution Part no. 64 x 42 x 35 mm 0 / 2,000 ppm CO 1 ppm M090 16 33 10 Application CO detection and concentration measurement Application in boiler rooms or at flue gas pipes, for example for self-protection during flue gas line tests CAPBs®sens GS10 Gas sniffer Description Sensor unit for fast and reliable gas leak detection. The flexible probe allows for use in spaces difficult to access. The gas concentration is displayed by the evaluation unit in ppm; the CAPBs® measurement unit provides an audible signal. The alarm threshold can be adjusted as required. Due to the base calibration for methane, a wide range of flammable gases is detectable. The anti-poisoning protection function for the sensor ensures a long service life. Application Gas leak detection Detection of gas leaks (flammable gases) in gas pipes as well as connection pieces and fittings, gas meters, gas burners and gas tanks Technical specifications Dimensions HxWxD Measuring range Resolution Part no. 290 x 42 x 35 mm 0 / 2,000 ppm CH4 10 ppm M090 13 14 10 Application video www.systronik.com 29 CAPBs®sens WQ10 Water quality Description CAPBs® sens WQ10 simultaneously determines the pH value, the electrical conductivity (S/cm) and hardness (°dH) with a single measurement. In addition, the TDS value (total dissolved solids in the water), salinity and temperature can be measured. Thanks to automatic measuring range switching, the conductivity can be measured with a high measuring accuracy within a large measuring range. Application Determination and evaluation of water quality Assessment of system water in heating systems (for example, heating system water analysis as per VDI 2035) Measurement of pH value, electrical conductivity, hardness, TDS value, salinity and temperature Technical specifications Dimensions HxWxD Part no. 130 x 43 x 36 mm M090 25 13 10 Electrical conductivity Salinity TDS value pH value Temperature Measuring range Resolution 0 / 50,000 S/cm 1 S/cm 0.1 mS/cm 0 / 25,000 ppm 0 / 50,000 mg/l 0 / 14 pH -5 / +60 °C 0.1 ppm 0.01 ppt T1 mg/l 0.01 pH 0.1 °C; 0.1 °F Accuracy ±2 S/cm (< 199 S/cm) ±5 S/cm (200 > 499 S/cm) ±20 S/cm (500 > 1999 S/cm) ±0.2 mS/cm (2.00 > 19.99 mS/cm) ±0.5 mS/cm (20.00 > 50.00 mS/cm) - 0.01 g/l ±0.01 pH ±0.5 °C 30 www.systronik.com Accessories CAPBs® sens WQ10 Article Case with calibration solutions and titrant Hardness measuring cutlery, single pack Storage solution, electrolyte potassium chloride 3 mol/l, 50 ml Conductivity calibration solution 1,413 mS, 100 ml Conductivity calibration solution 12,88 mS, 100 ml Test solution pH4, 100 ml Test solution pH7, 100 ml Cleaning solution, 100 ml Part no. 511094 524683 524405 524407 524408 524410 524411 524412 www.systronik.com 31 WQ10 set P00032 Application Modular extension kit for easy assessment of corrosion damage in in heating systems and installations Ready to use in combination with all BlueLine® measuring instruments, smartphones or tablets as evaluation devices Multi-sensor for pH value, electrical conductivity, German hardness, salinity and temperature Description Complete on-site kit for quick assessment concerning the necessity of corrosion protection measures or system cleaning in the practical system case M with sensor unit CAPBs® sens WQ10 and all associated calibration solutions and sample containers. Scope of delivery Sensor unit CAPBs® sens WQ10 Calibration solutions for pH value Calibration solutions for electrical conductivity Sample containers Cleaning solution Storage solution Hardness measuring cutlery Modular system case M 32 www.systronik.com Application video FlowTemp® STx Volume flow & temperature Description Instrument for continuous, simultaneous determination of temperature (°C) and volume flow (l/min) and in water applications. The volume rate is measured with a high-precision capacitance flow sensor, the temperature with a PT1000 module. Both sensors are integrated in a robust housing made of high quality plastic with degree of protection IP 67. Thanks to the compact design, measurements at low water fittings are very convenient. Bluetooth® Smart to transfer the sensor values to the EuroSoft® live app. EuroSoft® live app www.systronik.com 33 Application Risk analysis in drinking water installations (EN 806) Function checks of decentralised drinking water heaters Documentation of water sampling for laboratories Determination of the water temperature at water taps (EN 806-2; DIN EN 1988-200) Acceptance tests of newly installed drinking water installations Verification and documentation of thermal disinfection against legionella (DVGW 557) Technical specifications Dimensions HxWxD Measuring range Accuracy Resolution Response delay (t90) Sensor Sampling rate Part no. 158 x 71 x 97 mm 1.5 / 17.5 l/min ±0.3 l/min or ±5 % RDG 0.1 l/min < 10 s Capacitive sensor 1 sec 502002 +5 / +80 °C ±1 °C or ±3 % RDG 0.1 °C < 5 s PT1000 Volume flow Temperature 34 www.systronik.com FlowTemp® online The SYSTRONIK GmbH is specialized in development and production of high-quality measuring instruments for flue gas analysis, testing and maintaining HVAC installations, climate and environmental technology. All SYSTRONIK products satisfy the highest standards for quality, reliability and safety. Our facilities are certified to full operational requirements of the ISO 9001 quality standard. We are constantly striving to improve our quality assurance position with input from periodic audits by independent experts required for continued certification. www.systronik.com 35 Distributor: Elektronik und Systemtechnik GmbH Gewerbestraße 57 88636 Illmensee, Germany Phone +49 7558 9206-0 Fax +49 7558 9206-20 [email protected] www.systronik.com Subject to change - v20001 The Bluetooth® word mark and logos are registered trademarks owned by the Bluetooth SIG, Inc. and any use of such marks by SYSTRONIK is under license. Google Play and the Google Play logo are trademarks of Google LLC. Apple and the Apple logo are trademarks of Apple Inc.Adobe PDF Library 15.0 Adobe InDesign 15.1 (Windows)