Maximum Permissible Exposure

RF Exposure Info

SHENZHEN JUNYE ELECTRONICS CO LTD HP2403 FBECTROHP 2BB3B-HP2403 2BB3BHP2403 hp2403

PDF Viewing Options

Not Your Device? Search For Manuals or Datasheets below:


File Info : application/pdf, 1 Pages, 240.28KB

Document DEVICE REPORTGetApplicationAttachment.html?id=7389525
FCC ID: 2BB3B-HP2403
RF exposure evaluation
According to§15.247(i), §1.1307 (b) and KDB447498, systems operating under the provisions of this section shall be operated in a manner that ensures that the public is not exposed to radio frequency energy level in excess of the commission's guidance.
The SAR-based exemption formula of §1.1307(b)(3)(i)(B), repeated here as Formula (B.2), applies for single fixed, mobile, and portable RF sources with available maximum time-averaged power or effective radiated power (ERP), whichever is greater, of less than or equal to the threshold Pth (mW).
This method shall only be used at separation distances from 0.5 cm to 40 cm and at frequencies from 0.3 GHz to 6 GHz (inclusive). Pth is given by Formula (B.2).

F is in GHz, d is the separation distance (cm), and ERP20cm is per Formula (B.1). When the minimum test separation distance is < 5 mm, a distance of 5 mm is applied to determine SAR test exclusion. We use 5mm as separation distance to calculate

Antenna gain: -0.58 dBi Conducted Transmit Power Max: = 0.46dBm = 1.11mW
EIRP=0.46dBm-0.58dBi=-0.12dBm ERP=-0.12-2.15dB= -2.27dBm The maximun ERP power specified is -2.27dBm =0.59mW The source- based time-averaging conducted output power =0.59 * Duty factor mW (where Duty Factor1) = 0.59mW

The SAR Exclusion Threshold Level:

th(mW) = ERP20cm * (/20cm)  (X=

)

= 2.72 mW Since the source-based time-averaging conducted output power is well below the SAR low threshold level, so the EUT is considered to comply with SAR requirement without testing.



Related FCC IDs:

Search Any Device: