hjj
TABLE OF CONTENTS/目录清单
PDF Shenzhen Huntkey Electric Co., Ltd
深圳市航嘉驰源电气股份有限公司 shenzhen huntkey electric co., ltd page 2 文件编号：q01-731-00-12-p2版本：1 e. c. list/变更履历表 rev.
Not Your Device? Search For Manuals or Datasheets below:
File Info : application/pdf, 39 Pages, 4.12MB
Document DEVICE REPORTHKA120 规格书SHENZHEN HUNTKEY ELECTRIC CO., LTD Specification For 120 Watts/ Switching Mode Power Supply Product No./: P11-12019AY01R Model No./: HKA12019063-6B Customer/: File No./:EQS-731-5772 Revision/: V01 Date/:2020-05-07 TABLE OF CONTENTS/ 0.1. Approval Sheet Cover/ .............. 0.2. E.C. List/ ...................................... 1. Electrical Specification/ ..................... 2. Environment Requirements/ ............... 3. Reliability Requirements/ ................. 4. EMI/EMS Standards/ ................. 5. Safety Standards/ .............................. 6. Mach. Outline Drawing/ .......................... 7. Label Drawing/ ......................................... 8. Package Drawing/ ............. 9. Circuit Schematic Drawing/ ....... 10. PCB Drawing/PCB ........................... 11. Bill Of Material (BOM)/...... 12. Product Picture/ .................... 13. .................................................. Prepared By : Checked By : Approved By : Page 0 Q01-731-00-12-P2 1 SHENZHEN HUNTKEY ELECTRIC CO., LTD SPECIFICATION FOR APPROVAL CUSTOMER/ CUSTOMER P.N./ MODEL NO./ HKA12019063-6B APPROVAL NO./ PREPARED DATE/ 2020-05-07 CUSTOMER AUTHORIZED SIGNATURE/ Please return to us one copy of "SPECIFICATION FOR APPROVAL"with you approved signature. / / ADD: Huntkey Park,Banxue Road,Bantian,Shenzhen,Guangdong, P. R. China TEL/: 0755-89606666 P.C./ : 518129 FAX/: 0755-89606333 http://www.huntkey.com Prepared By : Checked By : Approved By : Page 1 Q01-731-00-12-P2 1 SHENZHEN HUNTKEY ELECTRIC CO., LTD E. C. LIST/ Rev. Description of Change/ Before/ After/ 1 Original Release --- Changed Date/ ECN No. 2020-05-07 --- Page 2 Q01-731-00-12-P2 1 SHENZHEN HUNTKEY ELECTRIC CO., LTD Contents/ 1. ELECTRICAL SPECIFICATION/.................................................................................................................................4 1.1. SCOPE/........................................................................................................................................................................ 4 1.2. INPUT CHARACTERISTICS/.....................................................................................................................................4 1.3. OUTPUT CHARACTERISTICS/................................................................................................................................. 5 1.4. PROTECTION REQUIREMENTS/...............................................................................................................................6 2. ENVIRONMENT REQUIREMENTS/...........................................................................................................................6 2.1. 2.2. OPERATING TEMPERATURE AND RELATIVE HUMIDITY/.................................................................... 6 STORAGE TEMPERATURE AND RELATIVE HUMIDITY/........................................................................6 3. RELIABILITY REQUIREMENTS/.............................................................................................................................7 3.1. VIBRATION/................................................................................................................................................................... 7 3.2. DROP IN/.......................................................................................................................................................................7 3.3. MTBF QUALIFICATION/................................................................................................................ 7 3.4. THE LIFETIME ELECTROLYTE CAPACITOR/..................................................................................................... 7 3.5. LOW TEMPERATURE STORAGE TEST/....................................................................................................................7 3.6. HIGH TEMPERATURE DAMP STORAGE TEST/........................................................................................................7 3.7. HIGH / LOW TEMPERATURE THERMAL SHOCK TEST/......................................................................................7 4. EMI/EMS STANDARDS/EMI/EMS ...................................................................................................................................8 4.1. EMI STANDARDS/EMI ................................................................................................................................................. 8 4.2. EMS STANDARDS/EMS ............................................................................................................................................... 8 5. SAFETY STANDARDS/...............................................................................................................................................8 5.1. DIELECTRIC STRENGTH(HI-POT)/()...................................................................................................... 8 5.2. LEAKAGE CURRENT/..................................................................................................................................................8 5.3. INSULATION RESISTANCE/..................................................................................................................................... 8 5.4. REGULATORY STANDARDS/...................................................................................................................................9 6. MACH. OUTLINE DRAWING/....................................................................................................................................... 9 7. LABEL DRAWING/........................................................................................................................................................ 10 8. PACKAGE DRAWING/..........................................................................................................................................11 9. CIRCUIT SCHEMATIC DRAWING/............................................................................................................ 12 10. PCB DRAWING/PCB ............................................................................................................................................ 12 11. BILL OF MATERIAL (BOM)/............................................................................................................ 12 12. PRODUCT PICTURE/ ................................................................................................................................. 12 13. BILL OF MATERIAL (BOM)/()................................................................................................................. 12 Page 3 Q01-731-00-12-P2 1 SHENZHEN HUNTKEY ELECTRIC CO., LTD 1. Electrical Specification/ 1.1. SCOPE/ The document details the electrical, mechanical and environmental specifications of a SMPS, the power supply provides 120 W continuous output power. 120W(),. The power supply shall meet the RoHS requirements. RoHS . Description/ SMPS Adaptor(Wall mount)/ SMPS Adaptor(Desk-top)/ Open Frame/ SMPS Unit (With Case)/ Others/ 1.2. Input Characteristics/ 1.2.1.Input Voltage & Frequency/ The range of input voltage is from 90Vac to 264Vac with a single phase. 90Vac 264Vac, . Minimum/ Rating/ Maximum/ Input Voltage/ 90Vac 100Vac~240Vac 264Vac Input Frequency/ 47Hz 60Hz/50Hz 63Hz 1.2.2.Input AC Current/ 2.0Amax. @ 90Vac input & Full load/ 90Vac 2.0A 1.2.3.Inrush Current (cold start)/() Power supply inrush current shall be less than the ratings of its critical components (including bulk rectifiers, fuses, and surge limiting device) under all conditions of line voltage of Section1.2.1. 1.2.1 ( 1.2.4.Average Efficiency / While input 115Vac and 230Vac, the average efficiency is more than 88%.The test point is at 25%,50%,75% and 100% of max load respectively.(warm up after 30 minutes) 115Vac 230Vac 88% 25%,50%,75% 100% () Page 4 Q01-731-00-12-P2 1 SHENZHEN HUNTKEY ELECTRIC CO., LTD 1.2.5.No-Load Input Power Dissipation/ While input 115Vac or 230Vac and the output is no load, the input power loss must be less than 0.21W. 115Vac/230Vac 0.21W. 1.3. Output Characteristics/ 1.3.1.Static Output Characteristics <Vo & R+N>/<&+> Output Rating Rated Load/ Peak Load Min. Load Max. Load Output Range R+N Remark +19.0V 0.0A 6.32A / 18.05V ~ 19.95V 300mVp-p Ripple & Noise: Tested by a oscilloscope using 20MHz bandwidth and the output is paralleled a 0.1uF ceramic capacitor and a 10uF electrolysis capacitor (Under the input Voltage 100~240Vac) : 20MHz , 0.1uF 10uF ( 100~240Vac) 1.3.2.Line/ Load Regulation// Output Rating Load Condition/ Line Regulation Load Regulation Min. Load Max. Load +19.0V 0.0A 6.32A ± 2% 5% 1.3.3.Turn - on Delay Time/ Remark 3S max. @90Vac input & Full load/ 90Vac 3S 1.3.4.Hold-up Time/ 10mS min. @ Full load &115Vac/60Hz input turn off at worst case 115Vac/60Hz , 10mS 1.3.5.Rise Time/ 100mS max. @ Full load/ 100mS 1.3.6.Fall Time/ 20mS max. @ Full load/ 20mS 1.3.7.Output Overshoot / Undershoot// 10% max. When the power on or off/ 10% 1.3.8.Output Load Transient Response/ Output voltage is within 18.05V~19.95V while the load step is from 25% to 50% to 25% of max load or 50% to 75% to 50% of max load, R/S: 0.2A/uS, periods: 4mS, the maximum of comeback time is 200uS.Output Overshoot is less then ±5%. 18.05V~19.95V ,: 25% 50% 25% 50% 75% 50%,: 0.2A/uS,:4mS, 200uS±5% Page 5 Q01-731-00-12-P2 1 SHENZHEN HUNTKEY ELECTRIC CO., LTD 1.3.9.Capacitance Load/ While input 115Vac/230Vac & full load, and the output is paralleled a 1000uF electrolysis capacitor, the output voltage shall be single assurgent 115Vac/230Vac 1000uF 1.4. Protection Requirements/ 1.4.1.Over Current Protection/ OCP Point Limited: 6.95A~10.0A /: 6.95A~10.0A The output shall hiccup when the over current applied to the output, and shall be Self-recovery when the fault condition is removed ,,, 1.4.2.Short Circuit Protection/ The input power shall decrease when the output is short to GND; the power supply shall not damage, and shall be self-recovery when the fault condition is removed ,,, 1.4.3.Over Voltage Protection/ OVP Point limited: 29V of Max. / 29V The power supply shall be protected when the output is over voltage, and the power supply shall not be damaged , 2. Environment Requirements/ 2.1. Operating Temperature and Relative Humidity/ 0 to +40 10%RH to 90%RH @ Sea level shall below 5,000 meter 2.2. Storage Temperature and Relative Humidity/ -20 to +80 5%RH to 95%RH non-condensing @ Sea level shall below 5,000 meter 5,000 -20 +80, 5%RH to 95%RH Page 6 Q01-731-00-12-P2 1 SHENZHEN HUNTKEY ELECTRIC CO., LTD 3. Reliability Requirements/ 3.1. Vibration/ 5 to 500Hz sweep at a shift gears for 20 minute for each of the perpendicular axes X,Y,Z thereinto :acceleration frequency for 10 m2/s3 at 5~10HZ; acceleration frequency for 3 m2/s3 at 10~200HZ; acceleration frequency for 1 m2/s3 at 200~500HZ : 5 to 500Hz , X, Y, Z 20 ,: 5~10HZ 10 m2/s3 10~200HZ 3 m2/s3200~500HZ 1 m2/s3 3.2. Drop in/ 6 Surfaces each once, Height: 75cm, on the cement plane 6 , : 75 , 3.3. MTBF Qualification/ The MTBF shall be at least 100,000hours at 25, Full load and normal input condition : 100,000 ,25 3.4. The lifetime electrolyte capacitor/ The lifetime of electrolyte capacitor shall be at least 26280hours at 30of full load and 115Vac/230Vac input condition 26280 ,30 115Vac/230Vac 3.5. Low Temperature Storage Test/ At -20, test of non-operated for 48 hours, the speed of temperature change is 1/min, (The distance at least 1~3cm between the products). No abnormality in electric and mechanical characteristic after 1.5 hours recovery at the room temperature. -20 48 1/min 1~3cm 1.5 3.6. High Temperature Damp Storage Test/ At 80 and 95%RH, test of non-operated for 48 hours, the speed of temperature change is 1/min, (The distance at least 1~3cm between the products). No abnormality in electric and mechanical characteristic after 1.5 hours recovery at the room temperature. 80 95% 48 1/min 1~3cm 1.5 3.7. High / Low Temperature Thermal Shock Test/ The products test of non-operated with no-packing, storage the products 1 hour at +80, then storage the products 1 hour at -20. The temperature change time must less than 5 minutes. Total 12 cycles shall be applied. (The distance at least 1~3cm between the Page 7 Q01-731-00-12-P2 1 SHENZHEN HUNTKEY ELECTRIC CO., LTD products).No abnormality in electric and mechanical characteristic after 1.5 hours recovery at the room temperature. +80 1 -20 1 5 12 1~3cm 1.5 4. EMI/EMS Standards/EMI/EMS 4.1. EMI Standards/EMI EN 55032: 2015 Performance Satisfied Class B EN 61000-3-2:2014 EN 61000-3-3:2013 4.2. EMS Standards/EMS EN 61000-4-2:2009 Electrostatic Discharge(ESD): 8kV air discharge, 6kV contact discharge EN61000-4-3 : 2006+ Radio-Frequency Electromagnetic Field Susceptibility Test-RS A1 : 2008 + A2: 2010 EN61000-4-4: 2012 EN 61000-4-5:2014 Electrical Fast Transient/Burst-EFT ±2kV Surge Immunity: Differential mode ±1kV, Common mode ±2kV EN61000-4-6: 2014 Conducted Radio Frequency Disturbances Test-CS EN61000-4-8: 2010 Power Frequency Magnetic Field Test EN61000-4-11:2004 Voltage Dips 5. Safety Standards/ 5.1. Dielectric Strength(Hi-pot)/() Primary to Secondary: 3000Vac / 3.5mA / 60 seconds or 4242Vdc / 3.5mA / 60 seconds : 3000Vac / 3.5mA / 60 4242Vdc / 3.5mA / 60 Primary to FG: 1500Vac / 3.5mA / 60 seconds or 2121Vdc / 3.5mA / 60 seconds 1500Vac / 3.5mA / 60 2121Vdc / 3.5mA / 60 5.2. Leakage Current/ 0.25mAmax. at 264Vac / 50Hz input 264Vac/50Hz 0.25mA 5.3. Insulation Resistance/ 100M min. @ primary to secondary add a 500Vdc test voltage 500Vdc , 100M Page 8 Q01-731-00-12-P2 1 SHENZHEN HUNTKEY ELECTRIC CO., LTD 5.4. Regulatory Standards/ Type UL/CUL TUV CCC CE Country USA Europe China Europe Standard UL62368-1 EN60950-1 GB4943 EN62368-1 6. Mach. Outline Drawing/ Type PSB PSE NOM GOST Country Standard Singapore IEC60950-1 Japan J62368-1 Mexico NOM-001 Russia MEK60950 Page 9 Q01-731-00-12-P2 1 SHENZHEN HUNTKEY ELECTRIC CO., LTD 7. Label Drawing/ Page 10 Q01-731-00-12-P2 1 SHENZHEN HUNTKEY ELECTRIC CO., LTD 8. Package Drawing/ (Unitary Weight/About 380g Page 11 Q01-731-00-12-P2 1 SHENZHEN HUNTKEY ELECTRIC CO., LTD 9. Circuit Schematic Drawing/ 10.PCB Drawing/PCB 11.Bill Of Material (BOM)/ 12.Product Picture/ 13.Bill Of Material (BOM)/() Page 12 Q01-731-00-12-P2 1 SHENZHEN HUNTKEY ELECTRIC CO., LTD SPECIFICATION FOR APPROVAL CUSTOMER/ CUSTOMER P.N./ MODEL NO./ HKA12024038-7B APPROVAL NO./ PREPARED DATE/ 2020-08-27 CUSTOMER AUTHORIZED SIGNATURE/ Please return to us one copy of "SPECIFICATION FOR APPROVAL"with you approved signature. / / ADD: Huntkey Park,Banxue Road,Bantian,Shenzhen,Guangdong, P. R. China TEL/: 0755-89606666 P.C./ : 518129 FAX/: 0755-89606333 http://www.huntkey.com Prepared By : Checked By : Approved By : P11-12024AY03R/ HKA12024038-7B Page 0 Q01-731-00-12-P2 2 SHENZHEN HUNTKEY ELECTRIC CO., LTD E. C. LIST/ Rev. Description of Change/ Before/ After/ V01 Original Release --- Changed Date/ ECN No. 2020-08-27 --- P11-12024AY03R/ HKA12024038-7B Page 1 Q01-731-00-12-P2 2 SHENZHEN HUNTKEY ELECTRIC CO., LTD Contents/ 1. ELECTRICAL SPECIFICATION/.............................................................................................................................3 1.1. SCOPE/ ...................................................................................................................................................................... 3 1.2. INPUT CHARACTERISTICS/........................................................................................................................................ 3 1.3. OUTPUT CHARACTERISTICS/..................................................................................................................................... 4 1.4. PROTECTION REQUIREMENTS/ ................................................................................................................................. 5 2. ENVIRONMENT REQUIREMENTS/ ............................................................................................................................. 5 2.1. OPERATING TEMPERATURE AND RELATIVE HUMIDITY/ .............................................................................. 5 2.2. STORAGE TEMPERATURE AND RELATIVE HUMIDITY/ ................................................................................. 5 3. RELIABILITY REQUIREMENTS/ ............................................................................................................................... 5 3.1. VIBRATION/.................................................................................................................................................................. 5 3.2. DROP IN/ ..................................................................................................................................................................... 6 3.3. MTBF QUALIFICATION/.................................................................................................................. 6 3.4. THE LIFETIME ELECTROLYTE CAPACITOR/ ............................................................................................................. 6 3.5. LOW TEMPERATURE STORAGE TEST/ ......................................................................................................................... 6 3.6. HIGH TEMPERATURE DAMP STORAGE TEST/ ............................................................................................................... 6 3.7. HIGH / LOW TEMPERATURE THERMAL SHOCK TEST/ ................................................................................................ 6 4. EMI/EMS STANDARDS/EMI/EMS ..................................................................................................................................... 7 5. SAFETY STANDARDS/................................................................................................................................................. 7 5.1. DIELECTRIC STRENGTH(HI-POT)/() ............................................................................................................ 7 5.2. LEAKAGE CURRENT/ ................................................................................................................................................... 8 5.3. INSULATION RESISTANCE/........................................................................................................................................ 8 5.4. REGULATORY STANDARDS/...................................................................................................................................... 8 6. MACH. OUTLINE DRAWING/ ......................................................................................................................................... 8 7. LABEL DRAWING/ ........................................................................................................................................................ 10 8. PACKAGE DRAWING/ .......................................................................................................................................... 11 P11-12024AY03R/ HKA12024038-7B Page 2 Q01-731-00-12-P2 2 SHENZHEN HUNTKEY ELECTRIC CO., LTD 1. Electrical Specification/ 1.1. SCOPE/ The document details the electrical, mechanical and environmental specifications of a SMPS, the power supply provides 90 W continuous output power. 90W(),. The power supply shall meet the RoHS requirements. RoHS . Description/ SMPS Adaptor(Wall mount)/ SMPS Adaptor(Desk-top)/ Open Frame/ SMPS Unit (With Case)/ Others/ 1.2. Input Characteristics/ 1.2.1.Input Voltage & Frequency/ The range of input voltage is from 90Vac to 264Vac with a single phase. 90Vac 264Vac, . Minimum/ Rating/ Maximum/ Input Voltage/ 90Vac 100Vac~240Vac 264Vac Input Frequency/ 47Hz 60Hz/50Hz 63Hz 1.2.2.Input AC Current/ 1.5Amax. @ 90Vac input & Full load/ 90Vac 1.5A 1.2.3.Inrush Current (cold start)/() Power supply inrush current shall be less than the ratings of its critical components (including bulk rectifiers, fuses, and surge limiting device) under all conditions of line voltage of Section1.2.1. 1.2.1 ( 1.2.4.Average Efficiency / While input 115Vac and 230Vac, the average efficiency is more than 88%.The test point is at 25%,50%,75% and 100% of max load respectively.(warm up after 30 minutes) 115Vac 230Vac 88% 25%,50%,75% 100%() 1.2.5.No-Load Input Power Dissipation/ While input 115Vac or 230Vac and the output is no load, the input power loss must be less than 0.21W. 115Vac/230Vac 0.21W. P11-12024AY03R/ HKA12024038-7B Page 3 Q01-731-00-12-P2 2 SHENZHEN HUNTKEY ELECTRIC CO., LTD 1.3. Output Characteristics/ 1.3.1.Static Output Characteristics <Vo & R+N>/<&+> Output Rating Rated Load/ Peak Load Min. Load Max. Load Output Range R+N Remark +24.0V 0.0A 3.75A / 22.8V ~ 25.2V 300mVp-p Ripple & Noise: Tested by a oscilloscope using 20MHz bandwidth and the output is paralleled a 0.1uF ceramic capacitor and a 10uF electrolysis capacitor (Under the input Voltage 100~240Vac) : 20MHz , 0.1uF 10uF ( 100~240Vac) 1.3.2.Line/ Load Regulation// Output Rating +24.0V Load Condition/ Line Regulation Load Regulation Min. Load Max. Load 0.0A 3.75A 2% 5% 1.3.3.Turn - on Delay Time/ Remark 3S max. @90Vac input & Full load/ 90Vac 3S 1.3.4.Hold-up Time/ 10mS min. @ Full load &115Vac/60Hz input turn off at worst case 115Vac/60Hz , 10mS 1.3.5.Rise Time/ 100mS max. @ Full load/ 100mS 1.3.6.Fall Time/ 20mS max. @ Full load/ 20mS 1.3.7.Output Overshoot / Undershoot// 10% max. When the power on or off/ 10% 1.3.8.Output Load Transient Response/ Output voltage is within 22.8V~25.2V while the load step is from 25% to 50% to 25% of max load or 50% to 75% to 50% of max load, R/S: 0.2A/uS, periods: 4mS, the maximum of comeback time is 200uS.Output Overshoot is less then ±5%. 22.8V~25.2V ,: 25% 50% 25% 50% 75% 50%,: 0.2A/uS,:4mS, 200uS±5% 1.3.9.Capacitance Load/ While input 115Vac/230Vac & full load, and the output is paralleled a 1000uF electrolysis P11-12024AY03R/ HKA12024038-7B Page 4 Q01-731-00-12-P2 2 SHENZHEN HUNTKEY ELECTRIC CO., LTD capacitor, the output voltage shall be single assurgent 115Vac/230Vac 1000uF 1.4. Protection Requirements/ 1.4.1.Over Current Protection/ OCP Point Limited: 4.2A~6.5A /: 4.2A~6.5A The output shall hiccup when the over current applied to the output, and shall be Self-recovery when the fault condition is removed ,,, 1.4.2.Short Circuit Protection/ The input power shall decrease when the output is short to GND; the power supply shall not damage, and shall be self-recovery when the fault condition is removed ,,, 1.4.3.Over Voltage Protection/ OVP Point limited: 36V of Max. / 36V The power supply shall be protected when the output is over voltage, and the power supply shall not be damaged , 2. Environment Requirements/ 2.1. Operating Temperature and Relative Humidity/ 0 to +40 10%RH to 90%RH @ Sea level shall below 5,000 meter 2.2. Storage Temperature and Relative Humidity/ -20 to +70 5%RH to 95%RH non-condensing @ Sea level shall below 5,000 meter 5,000 -20 +70, 5%RH to 95%RH 3. Reliability Requirements/ 3.1. Vibration/ 5 to 9Hz & 9-200Hz sweep at a constant acceleration of 1.0G (Breadth: 3.5mm Max) for 5 times for each of the perpendicular axes X, Y, Z : 5 to 9Hz & 9-200Hz : 1.0G(: 3.5mm), X, Y, Z 5 P11-12024AY03R/ HKA12024038-7B Page 5 Q01-731-00-12-P2 2 SHENZHEN HUNTKEY ELECTRIC CO., LTD 3.2. Drop in/ 6 Surfaces each once, Height: 75cm, on the cement plane 6 , : 75 , 3.3. MTBF Qualification/ The MTBF shall be at least 100,000hours at 25, Full load and normal input condition : 100,000 ,25 3.4. The lifetime electrolyte capacitor/ The lifetime of electrolyte capacitor shall be at least 26280hours at 30of full load and 115Vac/230Vac input condition 26280 ,30 115Vac/230Vac 3.5. Low Temperature Storage Test/ At -20, test of non-operated for 48 hours, the speed of temperature change is 1/min, (The distance at least 1~3cm between the products). No abnormality in electric and mechanical characteristic after 1.5 hours recovery at the room temperature. -20 48 1/min 1~3cm 1.5 3.6. High Temperature Damp Storage Test/ At +70 and 95%RH, test of non-operated for 48 hours, the speed of temperature change is 1/min, (The distance at least 1~3cm between the products). No abnormality in electric and mechanical characteristic after 1.5 hours recovery at the room temperature. +70 95% 48 1/min 1~3cm 1.5 3.7. High / Low Temperature Thermal Shock Test/ The products test of non-operated with no-packing, storage the products 1 hour at +70, then storage the products 1 hour at -20. The temperature change time must less than 5 minutes. Total 12 cycles shall be applied. (The distance at least 1~3cm between the products). No abnormality in electric and mechanical characteristic after 1.5 hours recovery at the room temperature. +70 1 -20 1 5 12 1~3cm 1.5 P11-12024AY03R/ HKA12024038-7B Page 6 Q01-731-00-12-P2 2 SHENZHEN HUNTKEY ELECTRIC CO., LTD 4. EMI/EMS Standards/EMI/EMS /Item /Rating / Standards 1 Conducted CLASS B interference 2 Radiated CLASS B interference EN55032FCC part15 GB 9254 EN55032FCC part15 GB 9254 3 Harmonic Current Class A EN61000-3-2 4 Voltage dmax 4% fluctuations and Pst 1 flicker EN61000-3-3 5 SURGE Surge Immunity: Differential mode ±1kV, Common mode EN61000-4-5 ±2kVRating: B EN55035 6 EFT ±2kVRating: B2min 0U 10msB 70U 500msC 7 DIP 0U 5000msC Drop to 0Ulasts 10msB rating Drop to 70Ulasts 500msC rating Drop to 0Ulasts 5000msC rating 8 ESD Contact: ±8KV /Air±15KV Rating: B 9 CS Test Voltage4VRatingA 10 RS Test Voltage4V/mRatingA EN61000-4-4 EN55035 EN61000-4-11 EN55035 EN61000-4-2 EN55035 EN61000-4-6 EN55035 EN61000-4-3 EN55035 Performance Criteria Description: A--- normal performance within limits specified by the manufacturer, requestor or purchaser. B---temporary loss of function or degradation of performance which ceases after the disturbance Ceases, and from which the equipment under test recovers its normal performance, without operator Intervention. C---temporary loss of function or degradation of performance, the correction of which requires Operator intervention. D---loss of function or degradation of performance which is not recoverable, owing to damage to Hardware or software, or loss of data. A: B: C: D: 5. Safety Standards/ 5.1. Dielectric Strength(Hi-pot)/() Primary to Secondary: 3000Vac / 3.5mA / 60 seconds or 4242Vdc / 3.5mA / 60 seconds P11-12024AY03R/ HKA12024038-7B Page 7 Q01-731-00-12-P2 2 SHENZHEN HUNTKEY ELECTRIC CO., LTD : 3000Vac / 3.5mA / 60 4242Vdc / 3.5mA / 60 Primary to FG: 1500Vac / 3.5mA / 60 seconds or 2121Vdc / 3.5mA / 60 seconds 1500Vac / 3.5mA / 60 2121Vdc / 3.5mA / 60 5.2. Leakage Current/ 0.25mAmax. at 264Vac / 50Hz input 264Vac/50Hz 0.25mA 5.3. Insulation Resistance/ 100M min. @ primary to secondary add a 500Vdc test voltage 500Vdc , 100M 5.4. Regulatory Standards/ IEC/UL/EN 62368GB4943IEC/UL/EN60950IEC/UL/EN 60065 IEC/EN 60335GB4706UL1026,UL1083,UL982 IEC/EN/UL 60601GB9706 IEC/EN61347GB15910UL8750 IEC/EN 61558 Country Mark China IEC Europe South Korea Australia/ New Zealand Canada Argentina CCC CB CE/ERP/EMC KC+KCC+MEPS RCM+GEMS+SAA+C-Tick CSA+ICES+NRCAN IRAM-S Mark 6. Mach. Outline Drawing/ Country USA Japan Taiwan India Germany Mark UL/FCC/DOE/CEC PSE BSMI BIS TUV Singapore Russia PSB EAC DC DC DC LED 146*65*30.5 11353 #18 1.5m 5.5*2.5 L=11mm About 380g P11-12024AY03R/ HKA12024038-7B Page 8 Q01-731-00-12-P2 2 SHENZHEN HUNTKEY ELECTRIC CO., LTD P11-12024AY03R/ HKA12024038-7B Page 9 Q01-731-00-12-P2 2 7. Label Drawing/ SHENZHEN HUNTKEY ELECTRIC CO., LTD P11-12024AY03R/ HKA12024038-7B Page 10 Q01-731-00-12-P2 2 SHENZHEN HUNTKEY ELECTRIC CO., LTD 8. Package Drawing/ P11-12024AY03R/ HKA12024038-7B Page 11 Q01-731-00-12-P2 2 SHENZHEN HUNTKEY ELECTRIC CO., LTD Specification For 120 Watts/ Switching Mode Power Supply Product No./: P11-12024AY02R Model No./: HKA12024050-7B Customer/: File No./:EQS-731-5897 Revision/: V01 Date/:2020-07-20 TABLE OF CONTENTS/ Approval Sheet Cover/ .................... E.C. List/ ............................................. Contents .................................................... 1. Electrical Specification/ .......................... 2. Environment Requirements/ .................... 3. Reliability Requirements/ ...................... 4. EMI/EMS Standards/ ...................... 5. Safety Standards/ .................................. 6. Mach. Outline Drawing/ ............................... 7. Label Drawing/ ........................................... 8. Package Drawing/ ................................ 9. Circuit Schematic Drawing/ ............ 10.PCB Drawing/PCB ............................... 11.Bill Of Material (BOM)/............ 12.Product Picture/ ........................... 13........................................................ Prepared By : Checked By : Approved By : P11-12024AY02R/ HKA12024050-7B Page 0 Q01-731-00-12-P2 2 SHENZHEN HUNTKEY ELECTRIC CO., LTD SPECIFICATION FOR APPROVAL CUSTOMER/ CUSTOMER P.N./ MODEL NO./ HKA12024050-7B APPROVAL NO./ PREPARED DATE/ 2020-07-20 CUSTOMER AUTHORIZED SIGNATURE/ Please return to us one copy of "SPECIFICATION FOR APPROVAL"with you approved signature. / / ADD: Huntkey Park,Banxue Road,Bantian,Shenzhen,Guangdong, P. R. China TEL/: 0755-89606666 P.C./ : 518129 FAX/: 0755-89606333 http://www.huntkey.com Prepared By : Checked By : Approved By : P11-12024AY02R/ HKA12024050-7B Page 1 Q01-731-00-12-P2 2 SHENZHEN HUNTKEY ELECTRIC CO., LTD E. C. LIST/ Rev. Description of Change/ Before/ After/ V01 Original Release --- Changed Date/ ECN No. 2020-07-20 --- P11-12024AY02R/ HKA12024050-7B Page 2 Q01-731-00-12-P2 2 SHENZHEN HUNTKEY ELECTRIC CO., LTD Contents/ 1. ELECTRICAL SPECIFICATION/.................................................................................................................................4 1.1. SCOPE/........................................................................................................................................................................ 4 1.2. INPUT CHARACTERISTICS/.....................................................................................................................................4 1.3. OUTPUT CHARACTERISTICS/................................................................................................................................. 5 1.4. PROTECTION REQUIREMENTS/...............................................................................................................................6 2. ENVIRONMENT REQUIREMENTS/...........................................................................................................................6 2.1. 2.2. OPERATING TEMPERATURE AND RELATIVE HUMIDITY/.................................................................... 6 STORAGE TEMPERATURE AND RELATIVE HUMIDITY/........................................................................6 3. RELIABILITY REQUIREMENTS/.............................................................................................................................6 3.1. VIBRATION/................................................................................................................................................................... 6 3.2. DROP IN/.......................................................................................................................................................................7 3.3. MTBF QUALIFICATION/................................................................................................................ 7 3.4. THE LIFETIME ELECTROLYTE CAPACITOR/..................................................................................................... 7 3.5. LOW TEMPERATURE STORAGE TEST/....................................................................................................................7 3.6. HIGH TEMPERATURE DAMP STORAGE TEST/........................................................................................................7 3.7. HIGH / LOW TEMPERATURE THERMAL SHOCK TEST/......................................................................................7 4. EMI/EMS STANDARDS/EMI/EMS ...................................................................................................................................8 5. SAFETY STANDARDS/...............................................................................................................................................9 5.1. DIELECTRIC STRENGTH(HI-POT)/()...................................................................................................... 9 5.2. LEAKAGE CURRENT/..................................................................................................................................................9 5.3. INSULATION RESISTANCE/..................................................................................................................................... 9 5.4. REGULATORY STANDARDS/...................................................................................................................................9 6. MACH. OUTLINE DRAWING/....................................................................................................................................... 9 7. LABEL DRAWING/........................................................................................................................................................ 11 8. PACKAGE DRAWING/..........................................................................................................................................12 9. CIRCUIT SCHEMATIC DRAWING/............................................................................................................ 13 10. PCB DRAWING/PCB ............................................................................................................................................ 13 11. BILL OF MATERIAL (BOM)/............................................................................................................ 13 12. PRODUCT PICTURE/ ................................................................................................................................. 13 13. ..............................................................................................................................................................................13 P11-12024AY02R/ HKA12024050-7B Page 3 Q01-731-00-12-P2 2 SHENZHEN HUNTKEY ELECTRIC CO., LTD 1. Electrical Specification/ 1.1. SCOPE/ The document details the electrical, mechanical and environmental specifications of a SMPS, the power supply provides 120 W continuous output power. 120W(),. The power supply shall meet the RoHS requirements. RoHS . Description/ SMPS Adaptor(Wall mount)/ SMPS Adaptor(Desk-top)/ Open Frame/ SMPS Unit (With Case)/ Others/ 1.2. Input Characteristics/ 1.2.1.Input Voltage & Frequency/ The range of input voltage is from 90Vac to 264Vac with a single phase. 90Vac 264Vac, . Minimum/ Rating/ Maximum/ Input Voltage/ 90Vac 100Vac~240Vac 264Vac Input Frequency/ 47Hz 60Hz/50Hz 63Hz 1.2.2.Input AC Current/ 2.0Amax. @ 90Vac input & Full load/ 90Vac 2.0A 1.2.3.Inrush Current (cold start)/() Power supply inrush current shall be less than the ratings of its critical components (including bulk rectifiers, fuses, and surge limiting device) under all conditions of line voltage of Section1.2.1. 1.2.1 ( 1.2.4.Average Efficiency / While input 115Vac and 230Vac, the average efficiency is more than 88%.The test point is at 25%,50%,75% and 100% of max load respectively.(warm up after 30 minutes) 115Vac 230Vac 88% 25%,50%,75% 100%() 1.2.5.No-Load Input Power Dissipation/ While input 115Vac or 230Vac and the output is no load, the input power loss must be less than 0.21W. P11-12024AY02R/ HKA12024050-7B Page 4 Q01-731-00-12-P2 2 SHENZHEN HUNTKEY ELECTRIC CO., LTD 115Vac/230Vac 0.21W. 1.3. Output Characteristics/ 1.3.1.Static Output Characteristics <Vo & R+N>/<&+> Output Rating Rated Load/ Peak Load Min. Load Max. Load Output Range R+N Remark +24.0V 0.0A 5.0A / 22.8V ~ 25.2V 300mVp-p Ripple & Noise: Tested by a oscilloscope using 20MHz bandwidth and the output is paralleled a 0.1uF ceramic capacitor and a 10uF electrolysis capacitor (Under the input Voltage 100~240Vac) : 20MHz , 0.1uF 10uF ( 100~240Vac) 1.3.2.Line/ Load Regulation// Output Rating Load Condition/ Line Regulation Load Regulation Min. Load Max. Load +24.0V 0.0A 5.0A ± 2% 5% 1.3.3.Turn - on Delay Time/ Remark 3S max. @90Vac input & Full load/ 90Vac 3S 1.3.4.Hold-up Time/ 10mS min. @ Full load &115Vac/60Hz input turn off at worst case 115Vac/60Hz , 10mS 1.3.5.Rise Time/ 100mS max. @ Full load/ 100mS 1.3.6.Fall Time/ 20mS max. @ Full load/ 20mS 1.3.7.Output Overshoot / Undershoot// 10% max. When the power on or off/ 10% 1.3.8.Output Load Transient Response/ Output voltage is within 22.8V~25.2V while the load step is from 25% to 50% to 25% of max load or 50% to 75% to 50% of max load, R/S: 0.2A/uS, periods: 4mS, the maximum of comeback time is 200uS.Output Overshoot is less then ±5%. 22.8V~25.2V ,: 25% 50% 25% 50% 75% 50%,: 0.2A/uS,:4mS, 200uS±5% P11-12024AY02R/ HKA12024050-7B Page 5 Q01-731-00-12-P2 2 SHENZHEN HUNTKEY ELECTRIC CO., LTD 1.3.9.Capacitance Load/ While input 115Vac/230Vac & full load, and the output is paralleled a 1000uF electrolysis capacitor, the output voltage shall be single assurgent 115Vac/230Vac 1000uF 1.4. Protection Requirements/ 1.4.1.Over Current Protection/ OCP Point Limited: 5.5A~8.0A /: 5.5A~8.0A The output shall hiccup when the over current applied to the output, and shall be Self-recovery when the fault condition is removed ,,, 1.4.2.Short Circuit Protection/ The input power shall decrease when the output is short to GND; the power supply shall not damage, and shall be self-recovery when the fault condition is removed ,,, 1.4.3.Over Voltage Protection/ OVP Point limited: 36V of Max. / 36V The power supply shall be protected when the output is over voltage, and the power supply shall not be damaged , 2. Environment Requirements/ 2.1. Operating Temperature and Relative Humidity/ 0 to +40 10%RH to 90%RH @ Sea level shall below 5,000 meter 2.2. Storage Temperature and Relative Humidity/ -20 to +70 5%RH to 95%RH non-condensing @ Sea level shall below 5,000 meter 5,000 -20 +70, 5%RH to 95%RH 3. Reliability Requirements/ 3.1. Vibration/ 5 to 9Hz & 9-200Hz sweep at a constant acceleration of 1.0G (Breadth: 3.5mm Max) for 5 P11-12024AY02R/ HKA12024050-7B Page 6 Q01-731-00-12-P2 2 SHENZHEN HUNTKEY ELECTRIC CO., LTD times for each of the perpendicular axes X, Y, Z : 5 to 9Hz & 9-200Hz : 1.0G(: 3.5mm), X, Y, Z 5 3.2. Drop in/ 6 Surfaces each once, Height: 100cm, Drop on the hard wood 6 , : 100 , 3.3. MTBF Qualification/ The MTBF shall be at least 100,000hours at 25, Full load and normal input condition : 100,000 ,25 3.4. The lifetime electrolyte capacitor/ The lifetime of electrolyte capacitor shall be at least 26280hours at 30of full load and 115Vac/230Vac input condition 26280 ,30 115Vac/230Vac 3.5. Low Temperature Storage Test/ At -20, test of non-operated for 48 hours, the speed of temperature change is 1/min, (The distance at least 1~3cm between the products). No abnormality in electric and mechanical characteristic after 1.5 hours recovery at the room temperature. -20 48 1/min 1~3cm 1.5 3.6. High Temperature Damp Storage Test/ At +70 and 95%RH, test of non-operated for 48 hours, the speed of temperature change is 1/min, (The distance at least 1~3cm between the products). No abnormality in electric and mechanical characteristic after 1.5 hours recovery at the room temperature. +70 95% 48 1/min 1~3cm 1.5 3.7. High / Low Temperature Thermal Shock Test/ The products test of non-operated with no-packing, storage the products 1 hour at +70, then storage the products 1 hour at -20. The temperature change time must less than 5 minutes. Total 12 cycles shall be applied. (The distance at least 1~3cm between the products).No abnormality in electric and mechanical characteristic after 1.5 hours recovery at the room temperature. +70 1 -20 1 5 12 1~3cm 1.5 P11-12024AY02R/ HKA12024050-7B Page 7 Q01-731-00-12-P2 2 SHENZHEN HUNTKEY ELECTRIC CO., LTD 4. EMI/EMS Standards/EMI/EMS /Item /Rating / Standards 1 Conducted CLASS B interference 2 Radiated CLASS B interference EN55032FCC part15 GB 9254 EN55032FCC part15 GB 9254 3 Harmonic Current Class A EN61000-3-2 4 Voltage dmax 4% fluctuations and Pst 1 flicker EN61000-3-3 5 SURGE Surge Immunity: Differential mode ±1kV, Common mode EN61000-4-5 ±2kVRating: B EN55035 6 EFT ±2kVRating: B2min 0U 10msB 70U 500msC 7 DIP 0U 5000msC Drop to 0Ulasts 10msB rating Drop to 70Ulasts 500msC rating Drop to 0Ulasts 5000msC rating 8 ESD Contact: ±8KV /Air±15KV Rating: B 9 CS Test Voltage4VRatingA 10 RS Test Voltage4V/mRatingA EN61000-4-4 EN55035 EN61000-4-11 EN55035 EN61000-4-2 EN55035 EN61000-4-6 EN55035 EN61000-4-3 EN55035 Performance Criteria Description: A--- normal performance within limits specified by the manufacturer, requestor or purchaser. B---temporary loss of function or degradation of performance which ceases after the disturbance Ceases, and from which the equipment under test recovers its normal performance, without operator Intervention. C---temporary loss of function or degradation of performance, the correction of which requires Operator intervention. D---loss of function or degradation of performance which is not recoverable, owing to damage to Hardware or software, or loss of data. A: B: C: D: P11-12024AY02R/ HKA12024050-7B Page 8 Q01-731-00-12-P2 2 SHENZHEN HUNTKEY ELECTRIC CO., LTD 5. Safety Standards/ 5.1. Dielectric Strength(Hi-pot)/() Primary to Secondary: 3000Vac / 3.5mA / 60 seconds or 4242Vdc / 3.5mA / 60 seconds : 3000Vac / 3.5mA / 60 4242Vdc / 3.5mA / 60 Primary to FG: 1500Vac / 3.5mA / 60 seconds or 2121Vdc / 3.5mA / 60 seconds 1500Vac / 3.5mA / 60 2121Vdc / 3.5mA / 60 5.2. Leakage Current/ 0.25mAmax. at 264Vac / 50Hz input 264Vac/50Hz 0.25mA 5.3. Insulation Resistance/ 100M min. @ primary to secondary add a 500Vdc test voltage 500Vdc , 100M 5.4. Regulatory Standards/ IEC/UL/EN 62368GB4943IEC/UL/EN60950IEC/UL/EN 60065 IEC/EN 60335GB4706UL1026,UL1083,UL982 IEC/EN/UL 60601GB9706 IEC/EN61347GB15910UL8750 IEC/EN 61558 Country Mark China IEC Europe South Korea Australia/ New Zealand Canada Argentina CCC CB CE/ERP/EMC KC+KCC+MEPS RCM+GEMS+SAA+C-Tick CSA+ICES+NRCAN IRAM-S Mark 6. Mach. Outline Drawing/ Country USA Japan Taiwan India Germany Mark UL/FCC/DOE/CEC PSE BSMI BIS TUV Singapore Russia PSB EAC DC 146*65*30.5 UL11352 #18 P11-12024AY02R/ HKA12024050-7B Page 9 Q01-731-00-12-P2 2 DC DC LED SHENZHEN HUNTKEY ELECTRIC CO., LTD 1.2m 5.5*2.5 L=12mm About 400g P11-12024AY02R/ HKA12024050-7B Page 10 Q01-731-00-12-P2 2 SHENZHEN HUNTKEY ELECTRIC CO., LTD 7. Label Drawing/ P11-12024AY02R/ HKA12024050-7B Page 11 Q01-731-00-12-P2 2 SHENZHEN HUNTKEY ELECTRIC CO., LTD 8. Package Drawing/ P11-12024AY02R/ HKA12024050-7B Page 12 Q01-731-00-12-P2 2 SHENZHEN HUNTKEY ELECTRIC CO., LTD 9. Circuit Schematic Drawing/ 10.PCB Drawing/PCB 11.Bill Of Material (BOM)/ 12.Product Picture/ 13. P11-12024AY02R/ HKA12024050-7B Page 13 Q01-731-00-12-P2 2Adobe Acrobat Pro 11.0.0