PocketGuide CABERG EN CANADA
User Manual CABERG PRO SPEAK EVO
Midland Europe srl SPEAK Bluetooth Handset K6M-SPEAK K6MSPEAK speak
download (pdf)
SPEAK Bluetooth Handset by Midland Europe srl
PocketGuide CABERG EN CANADA
20 hours ago — To download the complete user manual please visit www.caberg.it/en. POCKET ... residential installation. This equipment generates uses and can radiate radio.
User Guide for CABERG models including: Pro Speak EVO Intercom, Speak EVO Intercom, EVO Intercom, Intercom
Not Your Device? Search For Manuals or Datasheets below:
File Info : application/pdf, 2 Pages, 1.39MB
Document DEVICE REPORTSPEAK-Users-Manual-Midland-Europe-srl-k6m-speak-ex-1-14POCKET GUIDE DESCRIPTION - LEGENDA Speakers Wired microphone Button - Button + Micro USB recharge plug Boom mike Button-/Button+ OPERATION X" Press X sec. xX Press X times AUDIO FEEDBACK Sound alert VISUAL FEEDBACK Blue led blinking Red led blinking Red/blue led blinking Purple led Steady blue led Steady red led POWER ON Press 3 sec. 3" Led Blinking "Power on" Battery status PAIRING TO PHONE/GPS Status: power off 4" CABERG Press 4 sec. Led blinks alternately Searching Bluetooth device on your phone. If needed, enter PIN code (0000). Four led blinkings "Pairing successful" "Device connected" POWER OFF Pres 3 sec. 3" Led Blinking "Power off" PAIRING ANOTHER CABERG PRO SPEAK EVO Status: Both units powered on Press 5 sec. 5" on both devices "Pairing" Led blinks alternately on both devices Three led blinkings on both devices "Pairing successful" PAIRING TO A DIFFERENT MODEL/BRAND UNIT Status: Both units powered on 5" Press 5 sec. Led blinks alternately Follow the "phone" pairing procedure RESET ALL PAIRINGS Status: power off Press 7 sec. 7" Steady led for 3 sec. "Beep" "Pairing" Both units stop flashing "Pairing successful" OPEN/CLOSE INTERCOM Status: units on and paired Press once x1 "Beep" Led blinks: audio active VOICE CALL Status: unit on and connected to a phone Press twice x2 Voice assistant (Google assistant, Siri) Press twice x2 to end the call Note: Double click on + control -> Redial. ANSWER A CALL Status: phone rings Press once x1 to answer a call Press once x1 to end a call Press 3 sec. 3" to reject a call Note: if the automatic reply is activated, after 8 seconds the call automatically starts. VOLUME ADJUSTMENT Status: while listening to an audio source (intercom, music, phone call...) Keep pressed to increase the volume Keep pressed to decrease the volume Frequency Max power 2.4GHz 2.5mW MUSIC Status: unit on and connected to the phone Select a music APP from the phone x1 x2 x2 Press once Play/Pause Blinking Press twice Song forward Press twice Song backward CHANGE LANGUAGE Status: unit on Keep pressed for more +7" than 7 seconds "Battery status" in the various languages. Release + button to select the desired one. To download the complete user manual please visit www.caberg.it/en Distributed by: CABERG S.P.A. Via Emilia, 11 - 24052 Azzano S.Paolo Bergamo (Italy) www.caberg.it Read the instructions carefully before installation and use. Produced or imported by: MIDLAND EUROPE srl Via R. Sevardi 7 - 42124 Reggio Emilia - Italy Distributed in Canada by: .................................................................. .................................................................. .................................................................. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: - Reorient or relocate the receiving antenna. - Increase the separation between the equipment and receiver. -Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -Consult the dealer or an experienced radio/TV technician for help Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada's licence-exempt RSS(s). Operation is subject to the following two conditions: (1) This device may not cause interference. (2) This device must accept any interference, including interference that may cause undesired operation of the device. L'émetteur/récepteur exempt de licence contenu dans le présent appareil est conforme aux CNR d'Innovation, Sciences et Développement économique Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes : (1) L' appareil ne doit pas produire de brouillage; (2) L' appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d' en compromettre le fonctionnement.
References
Related FCC IDs:
- K6M-SPEAK - Midland Europe srl Bluetooth Handset [-SPEAK] Adobe PDF Library 17.0 Adobe InDesign 18.2 (Macintosh)