SUCR241000040303 Appendix A Detailed System Check Results

Sonim Technologies, Inc. S1003 smartphone WYPS1003 WYPS1003 s1003

A Detailed System Check Results

PDF Viewing Options

Not Your Device? Search For Manuals or Datasheets below:


File Info : application/pdf, 2 Pages, 244.28KB

Document DEVICE REPORTGetApplicationAttachment.html?id=8360283
`
SGS-CSTC Standards Technical Services (Suzhou) Co., Ltd

Report No.: SUCR241000040303

Rev.:

01

Appendix A

Detailed System Check Results
1. System Performance Check System Performance Check 13MHz Head

This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Termsand-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-andConditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company's findings at the time of its intervention only and within the limits of Client's instructions, if any. The Company's sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only. Attention: To check the authenticity of testing / inspection report & certificate, please contact us at telephone:(86-755) 8307 1443, or email: [email protected]
Report Template No./Rev: SUWI-TRF-SAR A001/ v01

Date: 2024/12/11 Test Laboratory: SGS-SAR Lab
System Check_Head_13MHz
DUT: CLA-13; Type: Dipole; Serial: 1032 Communication System: UID 0, CW (0); Frequency: 13 MHz;Duty Cycle: 1:1 Medium: HSL13;Medium parameters used: f = 13 MHz;  = 0.747 S/m; r = 55.946;  = 1000 kg/m3 Phantom section: Flat Section DASY 5 Configuration:
 Probe: EX3DV4 - SN7735; ConvF(13.44, 13.44, 13.44); Calibrated: 2023/12/19  Sensor-Surface: 1.4mm (Mechanical Surface Detection)  Electronics: DAE4 Sn1245; Calibrated: 2024/06/05  Phantom: SAM 3; Type: ELI5; Serial: TP:1143  DASY52 52.10.4(1527); SEMCAD X 14.6.14(7483)
Configuration/Pin=250mW/Area Scan (8x8x1): Measurement grid: dx=15mm, dy=15mm
Maximum value of SAR (measured) = 0.146 W/kg
Configuration/Pin=250mW/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm,
dy=8mm, dz=5mm Reference Value = 14.72 V/m; Power Drift = 0.03 dB Peak SAR (extrapolated) = 0.203 W/kg SAR(1 g) = 0.109 W/kg; SAR(10 g) = 0.069 W/kg Maximum value of SAR (measured) = 0.165 W/kg
0 dB = 0.165 W/kg = -7.83 dBW/kg



Related FCC IDs:

Search Any Device: