Test Report WCDMA

Leax Arkivator Telecom USA Inc. FT205L 2AVFN-FT205L 2AVFNFT205L ft205l

PDF Viewing Options

Not Your Device? Search For Manuals or Datasheets below:


File Info : application/pdf, 22 Pages, 1.97MB

Document DEVICE REPORTGetApplicationAttachment.html?id=7314612
Shenzhen CTA Testing Technology Co., Ltd.
Room 106, Building 1, Yibaolai Industrial Park, Qiaotou Community, Fuhai Street, Bao'an District, Shenzhen, China
TEST REPORT
FCC Part 22 Subpart H / Part 24 Subpart E/ Part 27
Report Reference No......................: CTA24042900101 FCC ID..............................................: 2AVFN-FT205L Compiled by ( position+printed name+signature) .: File administrators Jinghua Xiao Supervised by ( position+printed name+signature) .:
Project Engineer Lushan Kong
Approved by ( position+printed name+signature) .: RF Manager Eric Wang
Date of issue.....................................: May. 07, 2024
Testing Laboratory Name ..............: Shenzhen CTA Testing Technology Co., Ltd.
Room 106, Building 1, Yibaolai Industrial Park, Qiaotou Community, Address ............................................:
Fuhai Street, Bao`an District, Shenzhen, China Applicant's name ............................: Leax Arkivator Telecom USA Inc
Address ............................................: 833 E Arapaho Rd.Suite 203 Richardson, TX 75081
Test specification ...........................:
FCC CFR Title 47 Part 2, Part 22H, Part 24E and Part 27 Standard ...........................................: ANSI/TIA-603-E-2016
KDB 971168 D01 Shenzhen CTA Testing Technology Co., Ltd. All rights reserved. This publication may be reproduced in whole or in part for non-commercial purposes as long as the Shenzhen CTA Testing Technology Co., Ltd. is acknowledged as copyright owner and source of the material. Shenzhen CTA Testing Technology Co., Ltd. takes no responsibility for and will not assume liability for damages resulting from the reader's interpretation of the reproduced material due to its placement and context. Test item description......................: Industrial 4G Router
Trade Mark .......................................: N/A Manufacturer ....................................: Leax Arkivator Telecom USA Inc Model/Type reference.......................: FT205L Listed Models ..................................: N/A Ratings .............................................: DC 12.0V From external circuit Modulation .......................................: QPSK Hardware version .............................: V1.0 Software version ..............................: V1.0 Frequency.......................................... UMTS Band II, UMTS Band IV, UMTS Band V Result................................................: PASS

Report No.: CTA24042900101

TEST REPORT

Equipment under Test : Industrial 4G Router

Model /Type

: FT205L

Listed Models

: N/A

Page 2 of 22

Applicant Address Manufacturer Address

: Leax Arkivator Telecom USA Inc : 833 E Arapaho Rd.Suite 203 Richardson, TX 75081 : Leax Arkivator Telecom USA Inc : 833 E Arapaho Rd.Suite 203 Richardson, TX 75081

Test result

Pass *

* In the configuration tested, the EUT complied with the standards specified page 4.
The test report merely corresponds to the test sample. It is not permitted to copy extracts of these test result without the written permission of the test laboratory.

Report No.: CTA24042900101

Page 3 of 22

Contents
1 SUMMARY ............................................................................................................................................................4
1.1 TEST STANDARDS .................................................................................................................................................4 1.2 TEST DESCRIPTION ....................................................................................................................................................4 1.3 ADDRESS OF THE TEST LABORATORY ..............................................................................................................................4 1.4 TEST FACILITY...........................................................................................................................................................5 1.5 STATEMENT OF THE MEASUREMENT UNCERTAINTY ...........................................................................................................5
2 GENERAL INFORMATION.......................................................................................................................................6
2.1 ENVIRONMENTAL CONDITIONS.....................................................................................................................................6 2.2 GENERAL DESCRIPTION OF EUT...................................................................................................................................6 2.3 DESCRIPTION OF TEST MODES AND TEST FREQUENCY ......................................................................................................6 2.4 EQUIPMENTS USED DURING THE TEST...........................................................................................................................8 2.5 RELATED SUBMITTAL(S) / GRANT (S).............................................................................................................................9 2.6 MODIFICATIONS .......................................................................................................................................................9
3 TEST CONDITIONS AND RESULTS ......................................................................................................................... 10
3.1 OUTPUT POWER.....................................................................................................................................................10 3.2 SPURIOUS EMISSION ...............................................................................................................................................12
4 TEST SETUP PHOTOS OF THE EUT ........................................................................................................................ 16
5 EXTERNAL AND INTERNAL PHOTOS OF THE EUT..................................................................................................17

Report No.: CTA24042900101

Page 4 of 22

1 SUMMARY
1.1 TEST STANDARDS
The tests were performed according to following standards:
FCC Part 2: FREQUENCY ALLOCA-TIONS AND RADIO TREATY MAT-TERS; GENERAL RULES AND REG-ULATIONS FCC Part 22 Subpart H: PRIVATE LAND MOBILE RADIO SERVICES. FCC Part 24 Subpart E: PUBLIC MOBILE SERVICES FCC Part 27: MISCELLANEOUS WIRELESS COMMUNICATIONS SERVICES ANSI/TIA-603-E-2016: Land Mobile FM or PM Communications Equipment Measurement and Performance Standards. ANSI C63.10-2013 Methods of Measurement of Radio-Noise Emissions from Low-Voltage Electrical and Electronic Equipment in the Range of 9 kHz to 40 GHz FCCKDB971168D01 Power Meas License Digital Systems

1.2 Test Description

Test Item

Section in CFR 47

Result

RF Output Power(Conducted Measurement)

Part 2.1046 Part 22.913 (a)(2)
Part 24.232 (c) Part 27.50(d)

Referring to the FCC ID No: XMR202008EC25AFXD issued by the Testing Lab
(TA technology(shanghai) co., Ltd.)

Part 2.1046

RF Output Power(Radiated Measurement)

Part 22.913 (a)(2) Part 24.232 (c)

Pass

Part 27.50(d)

Peak-to-Average Ratio

Part 24.232 (d) Part 27.50(d)

Referring to the FCC ID No: XMR202008EC25AFXD issued by the Testing Lab
(TA technology(shanghai) co., Ltd.)

99% & -26 dB Occupied Bandwidth

Part 2.1049 Part 22.917 Part 24.238

Referring to the FCC ID No: XMR202008EC25AFXD issued by the Testing Lab
(TA technology(shanghai) co., Ltd.)

Spurious Emissions at Antenna Terminal

Part 2.1051 Part 22.917 (a) Part 24.238 (a) Part 27.53(h)

Referring to the FCC ID No: XMR202008EC25AFXD issued by the Testing Lab
(TA technology(shanghai) co., Ltd.)

Part 2.1053

Field Strength of Spurious Radiation

Part 22.917 (a) Part 24.238 (a)

Pass

Part 27.53(h)

Out of band emission, Band Edge

Part 22.917 (a) Part 24.238 (a) Part 27.53(h)

Referring to the FCC ID No: XMR202008EC25AFXD issued by the Testing Lab
(TA technology(shanghai) co., Ltd.)

Frequency stability

Part 2.1055 Part 22.355 Part 24.235 Part 27.54

Referring to the FCC ID No: XMR202008EC25AFXD issued by the Testing Lab
(TA technology(shanghai) co., Ltd.)

Note1: the LTE module in this product has already finished the certification

(FCC ID: XMR202008EC25AFXD), Reference the results in the original test report.

1.3 Address of the test laboratory

Shenzhen CTA Testing Technology Co., Ltd. Room 106, Building 1, Yibaolai Industrial Park, Qiaotou Community,Fuhai Street, Bao'an District, Shenzhen,

Report No.: CTA24042900101

Page 5 of 22

China

The 3m-Semi anechoic test site fulfils CISPR 16-1-4 according to ANSI C63.4:2014 and CISPR 16-1-4:2010 SVSWR requirement for radiated emission above 1GHz.

1.4 Test Facility
The test facility is recognized, certified, or accredited by the following organizations:
FCC-Registration No.: 517856 Designation Number: CN1318 Shenzhen CTA Testing Technology Co., Ltd. has been listed on the US Federal Communications Commission list of test facilities recognized to perform electromagnetic emissions measurements.
Industry Canada Registration Number. Is: 27890 CAB identifier: CN0127 The Laboratory has been registered by Certification and Engineering Bureau of Industry Canada for radio equipment testing.
A2LA-Lab Cert. No.: 6534.01 Shenzhen CTA Testing Technology Co., Ltd. has been listed by American Association for Laboratory Accreditation to perform electromagnetic emission measurement.
The 3m-Semi anechoic test site fulfils CISPR 16-1-4 according to ANSI C63.10 and CISPR 16-14:2010.

1.5 Statement of the measurement uncertainty

The data and results referenced in this document are true and accurate. The reader is cautioned that there

may be errors within the calibration limits of the equipment and facilities. The measurement uncertainty was

calculated for all measurements listed in this test report acc. to TR-100028-01" Electromagnetic compatibility

and Radio spectrum Matters (ERM);Uncertainties in the measurement of mobile radio equipment

characteristics; Part 1" and TR-100028-02 "Electromagnetic compatibility and Radio spectrum Matters

(ERM);Uncertainties in the measurement of mobile radio equipment characteristics; Part 2 " and is

documented in the Shenzhen CTA Testing Technology Co., Ltd. quality system acc. to DIN EN ISO/IEC

17025. Furthermore, component and process variability of devices similar to that tested may result in

additional deviation. The manufacturer has the sole responsibility of continued compliance of the device.

Hereafter the best measurement capability for Shenzhen CTA Testing Technology Co., Ltd. :

Measuremen

Test

Range

t

Notes

Uncertainty

Radiated Emission

9KHz~30MHz

3.02 dB

(1)

Radiated Emission

30~1000MHz

4.06 dB

(1)

Radiated Emission

1~18GHz

5.14 dB

(1)

Radiated Emission

18-40GHz

5.38 dB

(1)

Conducted Disturbance

0.15~30MHz

2.14 dB

(1)

Output Peak power

30MHz~18GHz

0.55 dB

(1)

Power spectral density

/

0.57 dB

(1)

Spectrum bandwidth

/

1.1%

(1)

Radiated spurious emission (30MHz-1GHz)

30~1000MHz

4.10 dB

(1)

Radiated spurious emission (1GHz-18GHz)

1~18GHz

4.32 dB

(1)

Radiated spurious emission (18GHz-40GHz)

18-40GHz

5.54 dB

(1)

(1) This uncertainty represents an expanded uncertainty expressed at approximately the

95% confidence level using a coverage factor of k=2.

Report No.: CTA24042900101

Page 6 of 22

2 GENERAL INFORMATION
2.1 Environmental conditions Date of receipt of test sample : Apr. 11, 2024

Testing commenced on

: Apr. 11, 2024

Testing concluded on

: May. 07, 2024

During the measurement the environmental conditions were within the listed ranges:

Normal Temperature:

25°C

Relative Humidity:

55 %

Air Pressure:

101 kPa

2.2 General Description of EUT

Product Name: Model/Type reference: Power supply:
Adapter information:
Testing sample ID WCDMA

Industrial 4G Router
FT205L
DC 12.0V From external circuit Model: GQ12-120100-CU Input: AC 100-240V 50/60Hz 0.4A Output: 12.0V 1.0A CTA240429001-1# (Engineer sample), CTA240429001-2# (Normal sample)

Operation Band:

FDD Band II & Band IV & Band V

Power Class:

Power Class 3

Modilation Type:

QPSK for WCDMA/HSUPA/HSDPA,16QAM for HSPA+

Release Version:

R8

Antenna type:

External antenna

FDD Band II: 8.000dBi

Antenna gain:

FDD Band IV: 5.000dBi

FDD Band V: 9.416dBi

Note: For more details, refer to the user's manual of the EUT.

2.3 Description of Test Modes and Test Frequency

The EUT has been tested under typical operating condition. The CUM200 used to control the EUT staying in continuous transmitting and receiving mode for testing. Regards to the frequency band operation : the lowestmiddle and highest frequency of channel were selected to perform the test, then shown on this report.

Test Frequency: FDD Band II

FDD Band IV

FDD Band V

Channel

Frequency (MHz)

Channel

Frequency (MHz)

Channel

Frequency (MHz)

9262

1852.4

1312

1712.4

4132

826.40

9400

1880.0

1413

1732.6

4182

836.60

9538

1907.6

1513

1752.6

4233

846.60

Report No.: CTA24042900101

Page 7 of 22

Test Modes:

The test mode(s) are selected according to relevant radio technology specifications.

Test Mode

Test Modes Description

Mode 1

WCDMA system, QPSK modulation

Mode 2

HSDPA system, QPSK modulation

Mode 3

HSUPA system, QPSK modulation

Note:

1. As HSDPA and HSUPA with the same emission designator, test result recorded in this report at

the worst case Mode 4 with RCM 12.2Kbps only after exploratory scan.

Report No.: CTA24042900101

Page 8 of 22

2.4 Equipments Used during the Test

Test Equipment Manufacturer

Model No.

LISN

R&S

ENV216

LISN EMI Test Receiver

R&S R&S

ENV216 ESPI

EMI Test Receiver Spectrum Analyzer

R&S Agilent

ESCI N9020A

Spectrum Analyzer

R&S

Vector Signal generator
Analog Signal Generator
Universal Radio Communication Temperature and humidity meter Ultra-Broadband
Antenna Horn Antenna
Loop Antenna
Horn Antenna

Agilent
R&S
CMW500
Chigo
Schwarzbeck Schwarzbeck
Zhinan Beijing Hangwei
Dayang

Amplifier

Schwarzbeck

FSP N5182A
SML03 R&S
ZG-7020 VULB9163 BBHA 9120D ZN30900C OBH100400 BBV 9745

Amplifier

Taiwan chengyi EMC051845B

Directional coupler

NARDA

4226-10

High-Pass Filter

XingBo

XBLBQ-GTA18

High-Pass Filter
Automated filter bank
Power Sensor

XingBo Tonscend
Agilent

XBLBQ-GTA27 JS0806-F U2021XA

Amplifier

Schwarzbeck

BBV9719

Equipment No.
CTA-308 CTA-314 CTA-307 CTA-306 CTA-301 CTA-337 CTA-305
CTA-304 CTA-302 CTA-326 CTA-310 CTA-309 CTA-311 CTA-336 CTA-312 CTA-313 CTA-303 CTA-402 CTA-403 CTA-404 CTA-405 CTA-406

Calibration Date
2023/08/02

Calibration Due Date
2024/08/01

2023/08/02 2024/08/01

2023/08/02 2024/08/01 2023/08/02 2024/08/01

2023/08/02 2024/08/01

2023/08/02 2024/08/01

2023/08/02 2024/08/01

2023/08/02 2024/08/01 2023/08/02 2024/08/01

2023/08/02 2024/08/01 2023/10/17 2024/10/16 2023/10/13 2024/10/12 2023/10/17 2024/10/16 2021/08/07 2024/08/06 2023/08/02 2024/08/01 2023/08/02 2024/08/01 2023/08/02 2024/08/01 2023/08/02 2024/08/01 2023/08/02 2024/08/01 2023/08/02 2024/08/01 2023/08/02 2024/08/01 2023/08/02 2024/08/01

Report No.: CTA24042900101

Page 9 of 22

Test Equipment EMI Test Software EMI Test Software RF Test Software RF Test Software

Manufacturer Tonscend Tonscend Tonscend Tonscend

Model No. TS®JS32-RE TS®JS32-CE TS®JS1120-3 TS®JS1120

Version number 5.0.0.2
5.0.0.1
3.1.65
3.1.46

Calibration Date
N/A

Calibration Due Date
N/A

N/A

N/A

N/A

N/A

N/A

N/A

2.5 Related Submittal(s) / Grant (s) This submittal(s) (test report) is intended for filing to comply with of the FCC Part 22 and Part 24 and Part 27 Rules. 2.6 Modifications No modifications were implemented to meet testing criteria.

Report No.: CTA24042900101
3 TEST CONDITIONS AND RESULTS
3.1 Output Power LIMIT WCDMA Band V: 7W WCDMA Band II: 2W WCDMA Band IV: 1W The Peak-to-Average Ratio (PAR) of the transmission may not exceed 13 Db.
TEST CONFIGURATION
Conducted Power Measurement

Page 10 of 22

Radiated Power Measurement:

TEST PROCEDURE
Radiated Power Measurement: a) The EUT shall be placed at the specified height on a support, and in the position closest to
normal use as declared by provider. b) The test antenna shall be oriented initially for vertical polarization and shall be chosen to
correspond to the frequency of the transmitter c) The output of the test antenna shall be connected to the measuring receiver. d) The transmitter shall be switched on and the measuring receiver shall be tuned to the frequency
of the transmitter under test. e) The test antenna shall be raised and lowered through the specified range of height until a
maximum signal level is detected by the measuring receiver.
f) The transmitter shall then be rotated through 360° in the horizontal plane, until the maximum signal level is detected by the measuring receiver.
g) The test antenna shall be raised and lowered again through the specified range of height until a maximum signal level is detected by the measuring receiver.

Report No.: CTA24042900101

Page 11 of 22

h) The maximum signal level detected by the measuring receiver shall be noted.
i) The transmitter shall be replaced by a substitution antenna.
j) The substitution antenna shall be orientated for vertical polarization and the length of the substitution antenna shall be adjusted to correspond to the frequency of the transmitter.
k) The substitution antenna shall be connected to a calibrated signal generator.
l) If necessary, the input attenuator setting of the measuring receiver shall be adjusted in order to increase the sensitivity of the measuring receiver.
m) The test antenna shall be raised and lowered through the specified range of height to ensure that the maximum signal is received.
n) The input signal to the substitution antenna shall be adjusted to the level that produces a level detected by the measuring receiver, that is equal to the level noted while the transmitter radiated power was measured, corrected for the change of input attenuator setting of the measuring receiver.
o) The measurement shall be repeated with the test antenna and the substitution antenna orientated for horizontal polarization.
p) The measure of the effective radiated power is the larger of the two levels recorded at the input to the substitution antenna, corrected for gain of the substitution antenna if necessary.
TEST RESULTS

Radiated Measurement:
Note: 1. The field strength of radiation emission was measured in the following position: EUT standup position (Zaxis), lie-down position (X, Y axis). The data show in this report only with the worst case setup. After exploratory measurement the worst case of Z axis was reported. Note: 2. We test the H direction and V direction and V direction is worse.

Channel
9262 9400 9538

PMea (dBm)
-18.37 -17.31 -18.12

Pcl (dB)
3.41 3.49 3.55

WCDMA BAND II

Ga Antenna Gain(dB)

PAg (dB)

EIRP (dBm)

10.24

33.6

22.06

10.24

33.6

23.04

10.23

33.6

22.16

Limit (dBm)
33.01 33.01 33.01

Margin (dB)
-10.95 -9.97 -10.85

Polarization
V V V

Channel
1312 1413 1513

PMea (dBm)
-17.23 -18.07 -17.10

Pcl (dB)
3.15 3.17 3.26

WCDMA BAND IV

Ga Antenna Gain(dB)

PAg (dB)

EIRP (dBm)

9.58

33.6

22.80

9.62

33.6

21.98

9.71

33.6

22.95

Limit (dBm)
30.00 30.00 30.00

Margin (dB)
-7.20 -8.02 -7.05

Polarization
V V V

WCDMA BAND V

Channel

PMea (dBm)

Pcl (dB)

Ga Antenna Gain(dB)

Correction (dB)

PAg (dB)

ERP Limit (dBm) (dBm)

4132 -18.15 2.42 8.45

36.82

2.15 22.55 38.45

4183 -18.17 2.46 8.45

36.82

2.15 22.49 38.45

4233 -17.37 2.53 8.36

36.82

2.15 23.13 38.45

Remark:

1. EIRP=PMea(dBm)-Pcl(dB)+PAg(dB)+Ga(dBi)

2. ERP = EIRP ­ 2.15dBi as EIRP by subtracting the gain of the dipole.

Margin (dB)
-15.90 -15.96 -15.32

Polarization
V V V

Report No.: CTA24042900101

Page 12 of 22

3.2 Spurious Emission
LIMIT The power of any emission outside of the authorized operating frequency ranges must be attenuated below the transmitting power (P) by a factor of at least 43 + 10log (P) dB.

TEST CONFIGURATION

Conducted Spurious Measurement:

Radiated Spurious Measurement:

TEST PROCEDURE
Radiated Spurious Measurement:
a) The EUT shall be placed at the specified height on a support, and in the position closest to normal use as declared by provider.
b) The test antenna shall be oriented initially for vertical polarization and shall be chosen to correspond to the frequency of the transmitter
c) The output of the test antenna shall be connected to the measuring receiver. d) The transmitter shall be switched on and the measuring receiver shall be tuned to the frequency
of the transmitter under test. e) The test antenna shall be raised and lowered through the specified range of height until a
maximum signal level is detected by the measuring receiver.
f) The transmitter shall then be rotated through 360°in the horizontal plane, until the maximum
signal level is detected by the measuring receiver. g) The test antenna shall be raised and lowered again through the specified range of height until a
maximum signal level is detected by the measuring receiver. h) The maximum signal level detected by the measuring receiver shall be noted.

Report No.: CTA24042900101

Page 13 of 22

i) The transmitter shall be replaced by a substitution antenna. j) The substitution antenna shall be orientated for vertical polarization and the length of the
substitution antenna shall be adjusted to correspond to the frequency of the transmitter. k) The substitution antenna shall be connected to a calibrated signal generator. l) If necessary, the input attenuator setting of the measuring receiver shall be adjusted in order to
increase the sensitivity of the measuring receiver. m) The test antenna shall be raised and lowered through the specified range of height to ensure
that the maximum signal is received. n) The input signal to the substitution antenna shall be adjusted to the level that produces a level
detected by the measuring receiver, that is equal to the level noted while the transmitter radiated power was measured, corrected for the change of input attenuator setting of the measuring receiver. o) The measurement shall be repeated with the test antenna and the substitution antenna orientated for horizontal polarization. p) The measure of the effective radiated power is the larger of the two levels recorded at the input to the substitution antenna, corrected for gain of the substitution antenna if necessary. q) The resolution bandwidth of the spectrum analyzer was set at 100 kHz for Part 22 and 1MHz for Part 24. The frequency range was checked up to 10th harmonic.

Report No.: CTA24042900101

Page 14 of 22

TEST RESULTS Radiated Measurement:

Channel Frequency PMea (MHz) (dBm)

9262 9400 9538

3704.80 5557.20 3704.80 5557.20 3760.00 5640.00 3760.00 5640.00 3815.20 5722.80 3815.20 5722.80

-40.22 -46.10 -40.78 -53.82 -40.83 -54.57 -40.07 -51.50 -40.79 -51.07 -45.36 -53.45

Pcl (dB)
4.27 4.99 4.27 4.99 4.38 5.01 4.38 5.01 4.47 5.23 4.47 5.23

WCDMA Band II Ga
Diatance Antenna Gain(dB)

3.00

12.34

3.00

13.52

3.00

12.34

3.00

13.52

3.00

12.34

3.00

13.58

3.00

12.34

3.00

13.58

3.00

12.45

3.00

13.66

3.00

12.45

3.00

13.66

Peak EIRP (dBm) -32.15 -37.57 -32.71 -45.29 -32.87 -46.00 -32.11 -42.93 -32.81 -42.64 -37.38 -45.02

Limit (dBm)
-13.00 -13.00 -13.00 -13.00 -13.00 -13.00 -13.00 -13.00 -13.00 -13.00 -13.00 -13.00

Margin (dB)
-19.15 -24.57 -19.71 -32.29 -19.87 -33.00 -19.11 -29.93 -19.81 -29.64 -24.38 -32.02

Polarization
H H V V H H V V H H V V

Channel 1312 1413 1513

Frequency (MHz)
3424.80 5137.20 3424.80 5137.20 3465.20 5197.80 3465.20 5197.80 3505.20 5275.80 3505.20 5275.80

PMea (dBm)
-44.98 -46.37 -40.63 -52.05 -40.52 -51.82 -44.75 -48.32 -42.17 -51.83 -43.85 -48.38

Pcl (dB)
3.98 4.11 3.98 4.11 4.01 4.15 4.01 4.15 4.07 4.21 4.07 4.21

WCDMA Band IV Ga
Distance Antenna Gain(dB)

3.00

10.98

3.00

11.47

3.00

10.98

3.00

11.47

3.00

11.25

3.00

11.58

3.00

11.25

3.00

11.58

3.00

11.33

3.00

11.67

3.00

11.33

3.00

11.67

Peak EIRP (dBm) -37.98 -39.01 -33.63 -44.69 -33.28 -44.39 -37.51 -40.89 -34.91 -44.37 -36.59 -40.92

Limit (dBm)
-13.00 -13.00 -13.00 -13.00 -13.00 -13.00 -13.00 -13.00 -13.00 -13.00 -13.00 -13.00

Margin (dB)
-24.98 -26.01 -20.63 -31.69 -20.28 -31.39 -24.51 -27.89 -21.91 -31.37 -23.59 -27.92

Polarization
H H V V H H V V H H V V

Report No.: CTA24042900101

Page 15 of 22

WCDMA Band V

Channel

Frequency (MHz)

PMea (dBm)

Pcl (dB)

Diatance

Ga Antenna Gain(dB)

Peak EIRP (dBm)

1652.80 -44.18 3.02 3.00

9.58 -37.62

9262

2479.20 -46.71 3.51 1652.80 -42.22 3.02

3.00 3.00

10.72 9.68

-39.50 -35.56

2479.20 -49.27 3.51 3.00

10.72 -42.06

1673.20 -43.89 3.14 3.00

9.61 -37.42

9400

2509.80 -49.19 3.59 1673.20 -43.94 3.14

3.00 3.00

10.77 9.61

-42.01 -37.47

2509.80 -48.50 3.59 3.00

10.77 -41.32

1693.20 -44.71 3.24 3.00

9.77 -38.18

9538

2539.80 -55.41 3.65 1693.20 -40.50 3.24

3.00 3.00

10.89 9.77

-48.17 -33.97

2539.80 -47.95 3.65 3.00

10.89 -40.71

Remark:

1. EIRP=PMea(dBm)-Pcl(dB) +Ga(dBi) 2. We were not recorded other points as values lower than limits. 3. Margin = EIRP­ Limit

Limit (dBm)
-13.00 -13.00 -13.00 -13.00 -13.00 -13.00 -13.00 -13.00 -13.00 -13.00 -13.00 -13.00

Margin (dB)
-24.62 -26.50 -22.56 -29.06 -24.42 -29.01 -24.47 -28.32 -25.18 -35.17 -20.97 -27.71

Polarization
H H V V H H V V H H V V

Report No.: CTA24042900101
4 Test Setup Photos of the EUT

Page 16 of 22

Report No.: CTA24042900101
5 External and Internal Photos of the EUT

Page 17 of 22

Report No.: CTA24042900101

Page 18 of 22

Report No.: CTA24042900101

Page 19 of 22

Report No.: CTA24042900101

Page 20 of 22

Report No.: CTA24042900101

Page 21 of 22

Report No.: CTA24042900101

Page 22 of 22

********************** End of Report **********************



Related FCC IDs:

Search Any Device: