Kenmore 110 Series Washing Machine Lid Switch Replacement

Kenmore 110 Series Washing Machine Lid Switch Replacement

PDF Viewing Options

Not Your Device? Search For Manuals or Datasheets below:


File Info : application/pdf, 5 Pages, 517.14KB

Document DEVICE REPORTguide 11026 en
Kenmore 110 Series Washing Machine Li...

Guide ID: 11026 - Draft: 2020-04-14

Kenmore 110 Series Washing Machine Lid Switch Replacement
Replace a faulty lid switch on your Kenmore 110 series washing machine.
Written By: Robert Trout

This document was generated on 2020-11-21 05:04:37 AM (MST).

© iFixit -- CC BY-NC-SA

www.iFixit.com

Page 1 of 5

Kenmore 110 Series Washing Machine Li...
INTRODUCTION

Guide ID: 11026 - Draft: 2020-04-14

Use this guide to replace a faulty lid switch on your Kenmore 110 series washing machine.

TOOLS:
Adjustable Wrench (1) Phillips #1 Screwdriver (1) Socket Wrench (1) 5/16" Socket (1)

PARTS:
Replacement Lid Switch & Harness For 394923 Kenmore (1)

This document was generated on 2020-11-21 05:04:37 AM (MST).

© iFixit -- CC BY-NC-SA

www.iFixit.com

Page 2 of 5

Kenmore 110 Series Washing Machine Li...
Step 1 -- Lid Switch

Guide ID: 11026 - Draft: 2020-04-14
 To avoid risk of electric shock,
unplug the washing machine.
 Using a 5/16" socket wrench or an adjustable wrench, remove the three screws from the top rear of the washer.
 Lifting from the rear, remove the top panel.
 Set the top panel on its rear face, with its underside facing you.
 The top panel will still be
connected to the washer by wires and hoses. It will help if you have a flat raised surface to set the top panel on.

This document was generated on 2020-11-21 05:04:37 AM (MST).

© iFixit -- CC BY-NC-SA

www.iFixit.com

Page 3 of 5

Kenmore 110 Series Washing Machine Li...
Step 2

Guide ID: 11026 - Draft: 2020-04-14

 Using a 5/16" socket wrench or hand wrench, remove the two screws from the component cover.  Gripping from the bottom, pull the component cover out of the washer.
Step 3

 Carefully unplug the two wires connected to the lid switch.  Remove the two Phillips screws securing the bracket.  Remove the green ground wire.  With a screwdriver, remove the single screw connecting the lid switch to the bracket.

This document was generated on 2020-11-21 05:04:37 AM (MST).

© iFixit -- CC BY-NC-SA

www.iFixit.com

Page 4 of 5

Kenmore 110 Series Washing Machine Li...

Guide ID: 11026 - Draft: 2020-04-14

To reassemble your device, follow these instructions in reverse order.

This document was generated on 2020-11-21 05:04:37 AM (MST).

© iFixit -- CC BY-NC-SA

www.iFixit.com

Page 5 of 5


wkhtmltopdf 0.12.5 Qt 4.8.7

Search Any Device: