未标题-1

Users manual

INNOVATIVE TECHNOLOGY ELECTRONICS LLC UOTUNE6 Hexagon Speaker 2AFHW-UOTUNE6 2AFHWUOTUNE6 uotune6

PDF Viewing Options

Not Your Device? Search For Manuals or Datasheets below:


File Info : application/pdf, 13 Pages, 2.99MB

Document DEVICE REPORTGetApplicationAttachment.html?id=3703676
006_ D
PLEASE READ CAREFULLY BEFORE OPERATING THIS EQUIPMENT KEEP IT IN A SAFE PLACE FOR FUTURE REFERENCE
BC

CAUTION
RISK OF ELECTRIC SHOCK DO NOT OPEN
CAUTION: TO REDUCE THE ELECTRIC SHOCK, DO NOT REMOVE THE COVER (OR BACK). NO USER SERVICEABLE PART INSIDE, REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
DANGEROUS VOLTAGE:The lighting flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.
ATTENTION:The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.
IC statement: This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause
undesired operation of the device.
WARNING:TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE.
WARNING: USE UNDER SUPERVISION OF AN ADULT DUE TO LONG CORD This unit has a long cord that can be easily tripped on or pulled on, causing injury. Please make sure it is arranged so that it will not drape over a tabletop, etc. Where it can be pulled on by children or tripped over accidentally.
FCC STATEMENT: This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1)This device may not cause harmful interference, and (2)This device must accept any interference received, including interference
that may cause undesired operation.
2

FCC NOTICE:
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which
the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. CAUTION: Changes or modifications not expressly approved by the party
responsible forcompliance could void the user's authority to operate the equipment.
FCC WARNING: To assure continued operation, follow the attached installation instructions and use only shield cables when connecting to other devices. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
Before using the unit, be sure to read all operating instruction carefully, please note that these are general precautions and may not pertain to your unit. For example, this unit may not have the capability to be connected to an outdoor antenna. 1. Read these instructions All the safety and operating instructions should be read before the appliance is operated. 2. Keep these instructions The safety and operating instructions should be kept for future reference. 3. Heed all warnings All warnings on the appliance and in the operating instructions should be adhered to. 4. Follow all instructions All operation and use instructions should be followed. 5. Do not use this apparatus near water The appliance should not be used near water; for example, near a bath tub,
3

washbowl, kitchen sink, laundry tub, in a wet basement, or near a swimming

pool.

6. Clean only with dry cloth

The appliance should be cleaned only as recommended by the manufacturer.

7. Do not block any ventilation openings. Install in accordance with the

manufacturer's instructions.

Slots and openings in the cabinet and in the back or bottom are provided for

ventilation, to ensure reliable operation of the product and to protect it from

overheating. These openings must not be blocked or covered. The openings

should never be blocked by placing the product on a bed, sofa, rug, or similar

surface. This product should never be placed near or over a radiator or heat

source. This product should not be placed in a built-in installation, such as a

bookcase or rack unless proper ventilation is provided or the manufacturer's

instructions have been adhered to.

8. Do not install near any heat sources such as radiators, heat registers,

stoves, or other apparatus (including amplifiers) that produce heat.

9. Do not defeat the safety purpose of the polarized or grounding-type

plug. A polarized plug has two blades with one wider than the other. A

grounding type plug has two blades and a third grounding prong. The

wide or the third prong are provided for your safety. If the provided plug

does not fit into your outlet, consult an electrician for replacement of the

obsolete outlet.

10. Protect the power cord from being walked on or pinched particularly

at plugs, convenience receptacles, and the point where they exit from the

apparatus.

11. Only use attachments / accessories specified by the manufacturer.

12. Use only with a cart, stand, tripod, bracket, or table

specified by the manufacturer, or sold with the apparatus.

When a cart is used, use caution when moving the

cart/apparatus combination to avoid injury

Portable Cart Warning

from tip-over.

An appliance and cart combination should be moved with care. Quick stop,

excessive fore and uneven surfaces may cause the appliance and cart

combination to overturn.

13. Unplug this apparatus during lightning storms or when unused for

long periods of time.

To protect your product from a lightning storm, or when it is left unattended and

unused for long periods of time, unplug it from the wall outlet and disconnect

the antenna or cable system. This will prevent damage to the product due to

lightning and power-line surges.

14. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects
have fallen into the apparatus, the apparatus has been exposed to rain or

4

moisture, does not operate normally, or has been dropped. 15. Power source This product should be operated only from the type of power source indicated on the marking label. If you are not sure of the type of power supply to your home, consult your appliance dealer or local power company. For products intended to operate from battery power, or other source, refer to the operation instructions. 16. Power lines An outside antenna system should not be located in the vicinity of overhead power lines or other electric light or power circuits, or where it can fall into such power lines or circuits. When installing an outside antenna system, extreme care should be taken to keep from touching such power lines or circuits as contact with them might be fatal. 17. Overloading Do not overload wall outlets and extension cords as this can result in a risk of fire or electric shock. 18. Object and liquid entry Never push objects of any kind into the product through openings as they may touch dangerous voltage points or short out parts that could result in fire or electric shock. Never spill or spray any type of liquid on the product. 19. Outdoor antenna grounding If an outside antenna is connected to the product, be sure the antenna system is grounded so as to provide some protection against voltage surges and built up static charges. Section 810 of the National Electric Code ANSI/ NFPA 70 provides information with respect to proper grounding of the mast and supporting structure, grounding of the lead- in wire to an antenna discharge product, size of grounding conductors, location of antenna- discharge product, connection to grounding electrodes and requirements for the grounding electrodes.
5

20. Service Do not attempt to service this product yourself as opening or removing covers may expose you to dangerous voltage or other hazards. Refer all servicing to qualified service personnel.
21. Replacement parts When replacement parts are required, be sure the service technician uses replacement parts specified by the manufacturer or those that have the same characteristics as the original parts. Unauthorized substitutions may result in fire or electric shock or other hazards. 22. Safety check Upon completion of any service or repairs to this product, ask the service technician to perform safety checks to determine that the product is in proper operating condition. 23. Wall or ceiling mounting The product should be mounted to a wall or ceiling only as recommended by the manufacturer. 24. Damage requiring service Unplug this product from the wall outlet and refer service to qualified service personnel under the following conditions. a)When the power- supply cord or plug is damaged.
b)If liquid has been spilled or objects have fallen into the product. c)If the product has been exposed to rain or water. d)If the product does not operate normally by following the operating instructions. Adjust only those controls that are covered by the operating instructions, as an adjustment of other controls may result in damage and will require extensive work by a qualified technician to restore the product to its normal operation. e)If the product has been dropped or the cabinet has been damaged. f)When the product exhibits a distinct change in performance- this indicates a need for service.
25. Note to CATV system installer This reminder is provided to call the CATV system installer' s attention to Article 820- 40 of the NEC that provides guidelines for proper grounding and, in particular, specifies that the cable ground shall be connected to the grounding system of the building, as close to the point of cable entry as practical. NOTE: Refer all servicing to qualified service personnel. Servicing is required when the unit has been damaged in any way such as the following: the power-supply cord or plug has been damaged, liquid has been spilled into unit, the unit has been exposed to rain or moisture, the unit has been dropped or the unit does not operate normally.
6

PRODUCT OVERVIEW

TOP&FRONT VIEW 1

SIDE VIEW

2

3

4 56

BOTTOM VIEW

7

1. Speaker 2. LED Light Ring 3. Power Button 4. Aux In Jack

5. LED Light On/Off Switch 6. Micro USB Charging Port 7. Strap Hole
7

POWER SOURCE
1. Uncover the rubber cover at the rear of the unit and slide the LED switch to left to turn on the LED Ring.
2. Connect the Micro USB Plug from the supplied USB Connection Cable to the Micro USB Port at the rear of the unit.
3. Connect the full sized USB Plug from the supplied USB Connection Cable to the USB Port on the Computer or USB Charger. (Computer and USB Charger NOT supplied).
4. During charging in power on mode, the LED Ring will be white and blink, after fully charged, it will be solid white. (NOTE: Charging in power off mode, the LED Ring will be solid white, after fully charged, it will turn off.) NOTE: There is a built-in battery in this unit. The LED Light will blink quickly and an alarm will sound, indicating the battery is in low level and needs to be recharged.

To Micro USB Port

Main unit

USB Connection Cable
PC
To USB Port on PC or USB Charger
NOTES: Your battery will last longer if you're following these simple guidelines for caring and storing: A. Before first time use, charge it approximately 2-3 hours until the unit is fully charged. B. Recharge and store the unit within the temperature range of 5°C~35°C (40°F~95°F). C. Do not charge longer than 24 hours. Excessive charging or running the unit until battery fully drains
will damage battery. Battery life will be extended if you keep the battery fully charged. D. Battery life naturally shortens slowly over time.
CAUTIONS: The built-in rechargeable battery is not replaceable. Do not remove or replace it, do not throw in the trash or in a fire. Do not dispose device in standard garbage disposal sites. Dispose of device at available Battery Recycling Sites after fully discharging battery. Not doing so may violate local disposal laws and regulations. Please refer to local regulations for proper battery disposal.
8

BLUETOOTH OPERATION
1. Uncover the rubber cover at the rear of the unit and slide the LED switch to left to turn on the LED Ring.
2. Press and hold the Power button on the unit until the LED Ring lighting up and blinking to power on the unit.
3. Activate the bluetooth function on your external device, and try searching, the pairing name
"UO_TUNE_IN_006 " will appear on the pairing name list.
4. Select it and register in your player. 5. After successful connection, the LED Ring will be solid white and it will send an indication
sound. 6. Adjust the volume level by the connected external player and play music as usual.
Note: The unit can be automatically connected with the last paired device after first time pairing when both of them are powered on and the Bluetooth is activated and in range. Do not plug in the AUX IN cable, or it will switch to AUX IN mode.
AUX IN OPERATION
1. Uncover the rubber cover at the rear of the unit and slide the LED switch to left to turn on the LED Ring.
2. Press and hold the Power button on the unit until the LED Ring lighting up and blinking to power on the unit.
3. Connect one end of the AUX IN Cable to the AUX IN jack, the unit will send an indication sound and the LED Ring will be solid white.
4. Connect another end of the AUX IN Cable to the AUX OUT, Line Out or Headphone jack on the external player like Mobilephone, MP3 Player etc..
5. Adjust the volume level by the connected external player and play music as usual.
9

TROUBLESHOOTING

Check the following before requesting service:

SYMPTOM
Can't power on

POSSIBLE CAUSE
Built in battery drained

POSSIBLE SOLUTION
Recharge the battery

No sound or sound weak Sound distortion BT not functioning
LED Ring is off

Volume level of paired/connected device Rise the volume level of the

is in low level

paired/connected device

Volume level of the connected/paired device too high

Reduce the volume level of the connected/paired device

The external BT device had NOT paired Pair the external BT device to the

to the unit

unit

The external BT device too far from the unit
Built in battery drained

Place the external BT device close to the unit
Recharge the battery and switch on the LED

SPECIFICATIONS

Audio power: BT Version: BT Operation Distance: Built-in battery: Charger:

1 x 3W (RMS) 4.1 32 Feet in open area 3.7V, 1000mAh
5V,1A

Same charging time for 1A or 2A charger 1. Under no battery condition, the charging time is around 2 hours and 45 minutes; 2. Under 50% battery condition, the charging time is around 2 hours.

ACCESSORIES:
1 x User's Manual 1 x Micro USB Charging Cable with transparent clip 1 x Audio Connection Cable with transparent clip

Design and specification are subject to change without notice. Bluetooth is a registered trademark of Bluetooth SIG, Inc.
Other trademarks and trade names are those of their respective owners. Made in China.
10

WARRANTY
Innovative Technology Electronics LLC. Limited Warranty: 90 Days Labor, One Year Parts
Innovative Technology Electronics LLC. (IT) warrants the product to be free from "Defects" in materials under normal use for a period of "One Year" from the date of the original purchase. The Warranty is "Not" transferable. IT agrees, within the initial "90 Day" period, to repair or replace the product if it is determined to be defective at "No Charge". It is further agreed that IT will cover the cost to repair or replace damaged "Parts" only for a total period of "One Year" from the date of the original purchase. The warranty does not cover cosmetic damage, antennas, AC cords, cabinets, headbands, ear-pads, or damage due to line power surges, connection to improper voltage supply or settings, misuse, mishandling, accident, acts of God or attempted repair by an unauthorized service agent.
To obtain service, the purchaser MUST present an original sales receipt / proof of purchase. Please contact us at www.ithomeproducts.com to request an RMA (Return Material Authorization) number to return products for service or replacement. Returns without an RMA number on the package will be refused and returned to sender. Upon receipt of the returning item and our full inspection (IT) may issue a replacement to customer for the same item or of one that has equivalent value and features. To return an item, supply full name, return address, phone number, item purchased, receipt of purchase and reason for return to obtain RMA number.
All returns must be in the original packaging or reasonable substitute to prevent damage. Customer "Must" include full name, shipping address and telephone number inside of package. No return will be shipped back to a PO Box or APO address. Please include your check or money order in the amount of
· USD $5.00 for items $10.00 to $39.99 (Price Paid Per Unit) · USD $10.00 for items $40.00 to $99.99 (Price Paid Per Unit) · USD $16.00 for items $100.00 and up (Price Paid Per Unit) · Shipping fees are non-refundable
to be payable to Innovative Technology Electronics LLC. (for handling and return shipping charges) (IT) will not be responsible for delays or unprocessed claims resulting from a purchaser's failure to provide any / all of the necessary information.

WARRANTY
Send all inquiries or RMA request via our website www.ithomeproducts.com/support.
Innovative Technology Electronics LLC. 1 Channel Drive Port Washington, NY 11050 Toll free: 1-877-483-2497 Website for support: www.ithomeproducts.com/support
There are no express warranties except as listed above. REPAIR OR REPLACEMENT AS PROVIDED UNDER THIS WARRANTY IS THE EXCLUSIVE REMEDY OF THE CUSTOMER, (IT) SHALL NOT BE LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES FOR BREACH OF ANY EXPRESS OR IMPLIED WARRANTY ON THIS PRODUCT EXCEPT TO THE EXTENT PROHIBITED BY APPLICABLE LAW. ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ON THIS PRODUCT IS LIMITED IN DURATION TO THE DURATION OF THIS WARRANTY. Some states do not allow the exclusion or limitation of incidental or consequential damages, or limitations on how long an implied warranty lasts, so the above exclusions or limitations may not apply to you. This warranty gives you specific legal rights and you may also have other rights, which vary from state to state.

006_D

HEXAGON SPEAKER
Model / Modèle N.006_D Made in China / Fabriqué en Chine

Urban Outfitters 24 Market Place, 3rd Floor London W1W8AN UK www.urbanoutfitters.com



Related FCC IDs:

Search Any Device: