INSTALLATION INSTRUCTIONS Louver Kit
This manual must be left with the homeowner for future reference. (P) 508024-01 *P508024-01* WARNING The Magic-Pak ... 3/5/2021 10:51:52 PM ...
This manual must be left with the homeowner for future reference. (P) 508024-01 *P508024-01* WARNING The Magic-Pak unit must be installed with approved wall sleeve and grille accessories for safe operation. Improper installations could result in property damage, personal injury, or death. WARNING Adequate safety precautions should be taken to ...
INSTALLATION INSTRUCTIONS Louver Kit For Use with MGE/MCE/MHP Series Magic-Pak Units Manufactured By Allied Air Enterprises LLC A Lennox International, Inc. Company 215 Metropolitan Drive West Columbia, SC 29170 This manual must be left with the homeowner for future reference. (P) 508024-01 *P508024-01* WARNING
Not Your Device? Search For Manuals or Datasheets below:
File Info : application/pdf, 3 Pages, 291.12KB
Document DEVICE REPORTMAGICPAK MSERIES LOUVERKIT-MGE-MCE-MHP-11EER INSTALLATIONMANUALINSTALLATION INSTRUCTIONS Louver Kit For Use with MGE/MCE/MHP Series Magic-Pak® Units This manual must be left with the homeowner for future reference. WARNING The Magic-Pak® unit must be installed with approved wall sleeve and grille accessories for safe operation. Improper installations could result in property damage, personal injury, or death. WARNING Adequate safety precautions should be taken to protect personnel. Improper installations could result in property damage, personal injury, or death. Installation Magic-Pak louvers are designed for installation on MagicPak Wall Sleeves. In accordance with the 2014 Florida Building Code, it may be required to use specific fastening methods depending on the risk category and wind exposure classification of the project where the equipment is being installed. Please refer to our wind load certification documentation prescribing installation and fastener requirements at www. magic-pak.com/literature. NOTE: Louvers should be tethered during the installation process to reduce the risk of dropping. Shipping and Packing List Qty Description 1 Louver 1 Mounting Hardware Packet 1 Installation Instructions Gasket 1 (Factory-installed for aluminum louvers) (Field-installed for plastic louvers) Manufactured By Allied Air Enterprises LLC A Lennox International, Inc. Company 215 Metropolitan Drive West Columbia, SC 29170 *P508024-01* (P) 508024-01 Gasket Attached to V-Shaped Louver Divider Panel Louver Wall Sleeve Assembly 1. Remove cardboard template (if present) from wall sleeve opening. 2. Apply supplied gasket to the interior flat surface of the V-shaped dividing louver (see figure above). Gasket must align with wall sleeve divider panel (or unit fan panel if using ASLEEVE-3) to form a seal between louver and divider panel. NOTE: Gasket is factory-applied to aluminum louvers. 508024-01 Issue 2109 Page 1 of 3 3. Install fasteners into the louver's two upper and two lower mounting holes. Do not seat fasteners completely (leave approximately 1/8" to 1/4" gap for fitment in step 4). 4. Guide louver through wall sleeve opening and insert fasteners into upper and lower key holes of the wall sleeve. 5. Install two middle fasteners. 6. Tighten all fasteners to secure louver to wall sleeve. NOTE: If additional sealing between wall sleeve and louver is desired, it is important to only caulk the left, right, and top sides. A gap between the bottom of the louver and the wall sleeve is required to allow proper rain water drainage. MGE Magic-Pak Model MHP MCE Polypropylene Louvers **MGE4-11-091*P **MGE4-11-121*P **MGE4-11-181*P **MGE4-11-241*P **MGE4-11-301*P **MGE4-11-361*P *MHP4-11-091*P *MHP4-11-121*P *MHP4-11-181*P *MHP4-11-241*P *MHP4-11-301*P *MHP4-11-361*P *MCE4-11-091*P *MCE4-11-121*P *MCE4-11-181*P *MCE4-11-241*P *MCE4-11-301*P *MCE4-11-361*P Accessory Nomenclature Polypropylene Louver Kit - White (29" Height) ALVRPWHT-1 Polypropylene Louver Kit - White (33" Height) ALVRPWHT-2 Polypropylene Louver Kit - White (45" Height) ALVRPWHT-3 Polypropylene Louver Kit - Sandstone (29" Height) ALVRPSAN-1 Polypropylene Louver Kit - Sandstone (33" Height) ALVRPSAN-2 Polypropylene Louver Kit - Sandstone (45" Height) ALVRPSAN-3 Polypropylene Louver Kit - Beige (29" Height) ALVRPBGE-1 Polypropylene Louver Kit - Beige (33" Height) ALVRPBGE-2 Polypropylene Louver Kit - Beige (45" Height) ALVRPBGE-3 Polypropylene Louver Kit - Taupestone (29" Height) ALVRPTPST-1 Polypropylene Louver Kit - Taupestone (33" Height) ALVRPTPST-2 Polypropylene Louver Kit - Taupestone (45" Height) ALVRPTPST-3 Polypropylene Louver Kit - White (29" Height / MGE) ALVRPWHTMGE-1 Polypropylene Louver Kit - White (33" Height / MGE) ALVRPWHTMGE-2 Polypropylene Louver Kit - White (45" Height / MGE) ALVRPWHTMGE-3 Polypropylene Louver Kit - Sandstone (29" Height / MGE) ALVRPSANMGE-1 Polypropylene Louver Kit - Sandstone (33" Height / MGE) ALVRPSANMGE-2 Polypropylene Louver Kit - Sandstone (45" Height / MGE) ALVRPSANMGE-3 Wall sleeve and louver sizes equal to the required wall opening dimensions for the unit size Optional: Wall sleeves and louvers can be oversized to maintain a uniform appearance Table 1. Available Louver Kits Page 2 of 3 Issue 2109 508024-01 **MGE4-11-091*P **MGE4-11-121*P **MGE4-11-181*P **MGE4-11-241*P **MGE4-11-301*P **MGE4-11-361*P *MHP4-11-091*P *MHP4-11-121*P *MHP4-11-181*P *MHP4-11-241*P *MHP4-11-301*P *MHP4-11-361*P *MCE4-11-091*P *MCE4-11-121*P *MCE4-11-181*P *MCE4-11-241*P *MCE4-11-301*P *MCE4-11-361*P MGE Magic-Pak Model MHP MCE Accessory Nomenclature Polypropylene Louver Kit - Beige (29" Height / MGE) ALVRPBGEMGE-1 Polypropylene Louvers Polypropylene Louver Kit - Beige (33" Height / MGE) ALVRPBGEMGE-2 Polypropylene Louver Kit - Beige (45" Height / MGE) ALVRPBGEMGE-3 Polypropylene Louver Kit - Taupestone (29" Height / MGE) ALVRPTPSTMGE-1 Polypropylene Louver Kit - Taupestone (33" Height / MGE) ALVRPTPSTMGE-2 Polypropylene Louver Kit - Taupestone (45" Height / MGE) ALVRPTPSTMGE-3 Extruded Aluminum Louver Kit (29" Height) ALVRAL-1 Extruded Aluminum Louver Kit Custom Color (29" Height) ALVRAL-1P Extruded Aluminum Louver Kit (33" Height) ALVRAL-2 Aluminum Louvers Extruded Aluminum Louver Kit Custom Color (33" Height) ALVRAL-2P Extruded Aluminum Louver Kit (33" Height) ALVRAL-7 Extruded Aluminum Louver Kit Custom Color (33" Height) ALVRAL-7P Extruded Aluminum Louver Kit (45" Height) ALVRAL-3 Extruded Aluminum Louver Kit Custom Color (45" Height) ALVRAL-3P Extruded Aluminum Louver Kit (45" Height) ALVRAL-4 Extruded Aluminum Louver Kit Custom Color (45" Height) ALVRAL-4P Extruded Aluminum Louver Kit - Impact Rated (29" Height) ALVRALC-1 Extruded Aluminum Louver Kit - Impact Rated / Custom Color (29" Height) ALVRALC-1P Impact Rated Louvers Extruded Aluminum Louver Kit - Impact Rated (33" Height) ALVRALC-2 Extruded Aluminum Louver Kit - Impact Rated / Custom Color (33" Height) ALVRALC-2P Extruded Aluminum Louver Kit - Impact Rated (45" Height) ALVRALC-3 Extruded Aluminum Louver Kit - Impact Rated / Custom Color (45" Height) ALVRALC-3P Extruded Aluminum Louver Kit - Impact Rated (45" Height) ALVRALC-4 Extruded Aluminum Louver Kit - Impact Rated / Custom Color (45" Height) ALVRALC-4P Wall sleeve and louver sizes equal to the required wall opening dimensions for the unit size Optional: Wall sleeves and louvers can be oversized to maintain a uniform appearance Table 1. Available Louver Kits 508024-01 Issue 2109 Page 3 of 3Adobe PDF Library 15.0 Adobe InDesign 16.1 (Windows)