Product Brochure

Miltex Curette Excavators 40-58/0, 40-58/1, 40-58/2, 40-58/3, 40-58/1-2, 40-58/1-3 from 4MD Medical

PDF Viewing Options

Not Your Device? Search For Manuals or Datasheets below:


File Info : application/pdf, 55 Pages, 4.84MB

Document DEVICE REPORT1002207 1
p o d i at ry i n s t r u m e n t s

589 Davies Drive York, PA 17402 toll-free phone 866-854-8300 toll-free fax 866-854-8400 phone 717-840-9335 fax 717-840-9347 email [email protected] integralife.com/integra-miltex

IntegraTM Miltex® Podiatry Instruments
The IntegraTM Miltex® name is synonymous with unparalleled quality and service to our customers and surgical instrumentation produced with the utmost attention to consistent detail. The surgical "feel" of IntegraTM Miltex® instruments, the superb cutting ability, the smoothly beveled box locks and jaw edges are just a few features that differentiate and make IntegraTM Miltex® products outperform and stand-out from the competition. These quality Podiatric Instruments include a comprehensive offering of Nail Nippers & Splitters, Cuticle Nippers, Curettes, Specialty Hand Instruments & Scissors, Sterile Disposable Blades and Biopsy Instruments, Care & Cleaning Products and other related surgical offerings. The IntegraTM Miltex® instrument selections recognize and meet the variety of clinical needs for all specialties including General Surgery, Plastic Surgery, Dermatology, Orthopedics, Foot and Ankle.
Special thanks to Dr. Michael B. Younes, DPM of Martin Foot & Ankle, York, PA, and Dr. Bradley Bakotic, DPM, DO, of Dermpath Diagnostics, a division of AmeriPath,
for their contributions to our new Podiatry Catalog.
General Information: Surgical instruments shown in this catalog are made of high quality surgical grade stainless steel, unless otherwise noted.
Illustrations and content provide general description only and may be subject to change. Some products in this catalog may not be available for sale in the European Union.
Miltex and Miltex Redefining Excellence are registered trademarks of Integra York PA, Inc., a subsidiary of Integra LifeSciences Corporation.
Integra and the Integra logo are trademarks of Integra LifeSciences Corporation ©2011 Integra LifeSciences Corporation

table of contents

table of contents
Bone & Cartilage Clamps and Bone Elevators .......................................................................................28 Bone Files.............................................................................................................................................22 Care and Cleaning Process................................................................................................................34-37 Chrome Instruments..........................................................................................................................13-14
Nippers, Splitters, Cuticle Tissue Nippers, Nail & Cuticle Scissors
Clamps and Tendon Forceps..................................................................................................................27
Phalangeal and Sesamoidectomy Clamps & Tendon Pulling Forceps
Crown and Collar Scissors....................................................................................................................19 Curet tes................................................................................................................................................ 15 Cutting Forceps...................................................................................................................................... 9
Liston-Blau and Ruskin Bone Cutting & Splitting Forceps
Diagnos tics........................................................................................................................................... 29
Percussion Hammer, Neurological Hammer, Neurological Pin Wheel, Pin & Wire Gauge for K-Wires, TapeMeasure, Ruler, & Tuning Forks
Disposable Sterile Products..............................................................................................................30-33
Biopsy Punches, BiopBladeTM, Dermal Curettes, Safety Scalpels, Disposable Scalpels, Blades & Handles
Elevators...........................................................................................................................................24-25 Specialty Instruments.......................................................................................................................16-18
Chisels, Knives, Corn Spoons, Nail Splitters, Ingrown Nail Shavers & Cutters, Probes,Packers, Excavators, Spatulas, & Elevators
Instrument Maintenance....................................................................................................................34-41
Care & Cleaning Products include: Cleaners, Lubricants, Enzyme Cleaners, Pre-cleaning Prep Enzyme Foam, Stain Remover, Cleaning Brushes, & Instrument Care Training DVD, Silitone Color Bands, & Tip-ItTM Instrument Guards
Metatarsal Elevators.............................................................................................................................26 Miltex Instrument Warranty...................................................................................................................48 Miltex Service and Repair Return Instructions......................................................................................50 Miltex Terms and Conditions..................................................................................................................49 Nail Nippers.........................................................................................................................................5-7 Nail Splitters and Nail Pulling Forceps................................................................................................... 8 Podiatric Specialty Scissors.................................................................................................................20
Ingrown Nail, Moleskin & Felt, & Heavy Serrated Utility Scissors
Rasps.................................................................................................................................................... 23 Shannon Burs.......................................................................................................................................21 Stainless Steelware & Instrument Stringers......................................................................................42-45 Sterilization Products...........................................................................................................................41
CSR Wrap, Indicator Tapes & Steam Indicator Strips
Surgical Cassettes and Latex-Free Silicone Mats..................................................................................40 Tissue and Cuticle Nippers....................................................................................................................10

www.miltex.com

3

features & benefits
ANATOMY OF a MILTEX® NAIL instrument
JAW DESIGN Exact blade alignment and precision sharpening facilitates effortless cutting and extends the performance life of the instrument.
BOX LOCK DESIGN Fully tempered box lock maintains precise instrument alignment.
ELECTRO-CHEMICAL ETCHING Instruments are etched with the Miltex logo and catalog number for easy re-ordering. This etching technique will not damage the instruments.
SPRINGS Springs enable controlled jaw movement and reduce hand fatigue associated with some procedures.
PASSIVATION PROCESS Passivation protects the instrument against corrosion due to repeated sterilization.
ERGONOMIC DESIGN Outstanding instrument design combines shape, length, weight, balance and feel for optimal comfort and performance.
MIRROR FINISH This finish simplifies the care and cleaning process by resisting the build up of debris thereby reducing corrosion.
STRENGTH & HARDNESS Manufactured to ensure optimal Rockwell hardness for instrument durability and longer-lasting blade edge sharpness.

4

www.miltex.com

Concave/curved nippers help reduce excessive motion by the provider to reach nail borders.

40-210-SS

40-212-SS

nail nippers

40-210-SS 40-212-SS

40-215-SS

40-217

REF 40-210-SS 40-212-SS 40-215-SS 40-217

Description Nail Nipper, 5-1/2" (14 cm), concave jaws, double spring, stainless Nail Nipper, 5-1/2" (14 cm), straight jaws, double spring, stainless Nail Nipper, 5-1/2" (14 cm), angled concave jaws, double spring, stainless Nail Nipper, 5" (12.7 cm), concave jaws, double spring, stainless

IMPORTANT: For optimal performance and to reduce spring breakage, it is crucial that instrument cutting edges be sharpened by the manufacturer every 6-8 months. This may vary depending on usage rate and number of times instruments are cycled. See page 48 for Service Repair and Return Instructions.

Items in bold represent the most popular patterns.

www.miltex.com

5

nail nippers

40-224

40-225-SS

40-225A

40-226-SS

40-226A

40-226-SS

40-227-SS

40-228

40204 40208

REF 40-224 40-225-SS 40-225A 40-226-SS 40-226A 40-227-SS 40-228 40204 40208

Description Nail Nipper, 4" (10.2 cm), straight jaws, double spring, stainless Nail Nipper, 4-1/2" (11.4 cm), straight jaws, double spring, stainless Nail Nipper, 4-1/2" (11.4 cm), delicate straight jaws, double spring, stainless Nail Nipper, 5" (12.7 cm), straight jaws, double spring, stainless Nail Nipper, 5" (12.7 cm), straight jaws, extra narrow, double spring, stainless Nail Nipper, 6" (15.2 cm), straight jaws, double spring, stainless Nail Nipper, 6" (15.2 cm), straight jaws, extra narrow, double spring, stainless Wing-GripTM Nail Nipper, 4-1/2" (11.4 cm), curved jaws NEW! Wing-GripTM Nail Nipper, 5" (12.7 cm), curved jaws NEW!

IMPORTANT: Prior to every sterilization and to maintain longevity, instruments with box-lock design should be cleaned using the Miltex® Instrument Nylon Brush (REF# 3-1000) and lubricated with Miltex® Spray Lube (REF# 3-700)

Items in bold represent the most popular patterns.

6

www.miltex.com

Ideal for Mycotic nails. Concave/curved nippers minimize soft tissue infiltration and destruction.

double action nail nippers

40-218

40-218PT

40-219

40-219PT

REF 40-218 40-218PT 40-219 40-219PT

Description Double Action Nail Nipper, 6" (15.2 cm), straight jaws, stainless (ideal for mycotic nails) Double Action Nail Nipper, Petite, 4-1/2" (11.4 cm), straight jaws, stainless Double Action Nail Nipper, 6" (15.2 cm), concave jaws, stainless Double Action Nail Nipper, Petite, 4-1/2" (11.4 cm), concave jaws, stainless

Items in bold represent the most popular patterns.

www.miltex.com

7

nail splitter & Forceps
English Anvil Nail Splitter eliminates plate lysis from nail bed and minimizes secondary mycotic infections. Ideal for Dystrophic Onychocryptotic nail.

40-234 40-235

40-230

40-234 40-235

REF 40-230 40-234 40-235

Description Nail Splitter, 5" (12.7 cm), English Anvil pattern, double spring, stainless Platypus Nail Pulling Forceps, 5-1/2" (14 cm), standard width jaws, stainless Platypus Nail Pulling Forceps, 5-1/2" (14 cm), narrow jaws, stainless

Items in bold represent the most popular patterns.

8

www.miltex.com

Ideal for Mycotic Nails. Versatile for both bone nipping and nail cutting. Thicker gauge prevents tips from splitting. Double Action Forceps are ideal for small hands and to combat fatigue. Useful in Hypertrophic bone/soft tissue proliferation.

Cutting forceps

21-627 25-384 25-385

40-1308

21-626

21-628

REF 40-1308 21-626 21-627 25-384 25-385 21-628

Description LISTON-BLAU Bone Cutting Forceps, 5-1/2" (14 cm), straight narrow blades RUSKIN (Kleinert-Kutz) Bone Splitting Forceps, 5-3/4" (14.6 cm), straight RUSKIN (Kleinert-Kutz) Bone Splitting Forceps, 5-3/4" (14.6 cm), curved RUSKIN Bone Cutting Forceps, 7-1/2" (19.1 cm), straight standard blades RUSKIN Bone Cutting Forceps, 7-1/2" (19.1 cm), slightly angled standard blades RUSKIN (ROWLAND) Nasal Hump Forceps, 7" (17.8 cm), double action, narrow jaws

www.miltex.com

9

tissue & cuticle nippers Useful on ulcers with peripheral hyperkeratosis.

40-245-SS

40-250-SS 40-251-SS

40-252

REF 40-245-SS 40-250-SS 40-251-SS 40-252

Description Tissue and Cuticle Nipper, 4" (10.2 cm), convex jaws, stainless Tissue and Cuticle Nipper, 4-1/2" (11.4 cm), convex jaws, stainless Tissue and Cuticle Nipper, 5" (12.7 cm), convex jaws, stainless Tissue and Cuticle Nipper, 5" (12.7 cm), convex jaws, heavy pattern, stainless

IMPORTANT: Removing scalpel blades or cutting wire using nippers and/or splitters will nick and dull the blade edges and void all warranties.

Items in bold represent the most popular patterns.

10

www.miltex.com

Expertly crafted from surgical grade stainless steel German forgings and of the very highest Operating Room quality standards and specifications. This new instrument line is advantageously priced while offering greater quality and value compared to instruments from any other source.

Nail nippers & splitters

MH40-210-SS

MH40-212-SS

MH40-224
REF MH40-210-SS MH40-212-SS MH40-224 MH40-225-SS MH40-226A

MH40-225-SS

MH40-226A

Description Nail Nipper, 5-3/4" (14.6 cm), concave, stainless steel Nail Nipper, 5-3/4" (14.6 cm), straight, stainless steel Nail Nipper, 4" (10.2 cm), straight, stainless steel Nail Nipper, 4-1/2" (11.4 cm), straight, stainless steel Nail Nipper, 5" (12.7 cm), delicate, straight, stainless steel

www.miltex.com

11

Nail nippers & splitters

MH40-226-SS

MH40-227-SS

MH40-230

MH40-245-SS

MH40-250-SS

REF MH40-226-SS MH40-227-SS MH40-230 MH40-245-SS MH40-250-SS

Description Nail Nipper, 5" (12.7 cm), straight, stainless steel Nail Nipper, 6" (15.2 cm), heavy, straight, stainless steel Nail Splitter, 5" (12.7 cm), english anvil, stainless steel Tissue & Cuticle Nipper, 4" (10.2 cm), convex, stainless steel Tissue & Cuticle Nipper, 4-1/2" (11.4 cm), stainless steel

12

www.miltex.com

chrome nail instruments

The Miltex® brand is recognized as a Premium Grade and expertly manufactured German instrument.
IMPORTANT: Corrosion and/or discoloration may occur if stainless steel and other dissimilar metals (e.g., chrome-plated) are sterilized together. Separate instruments prior to autoclaving.

40-210-CH

40-212-CH

40-210-CH 40-212-CH

40-225-CH

40-226-CH 40-227-CH

40-215-CH

40-226-CH

40-245-CH

40-250-CH 40-251-CH

REF 40-210-CH 40-212-CH 40-215-CH 40-225-CH 40-226-CH 40-227-CH 40-245-CH 40-250-CH 40-251-CH

Description Nail Nipper, 5-1/2" (14 cm), concave jaws, double spring, chrome Nail Nipper, 5-1/2" (14 cm), straight jaws, double spring, chrome Nail Nipper, 5-1/2" (14 cm), angled concave jaws, double spring, chrome Nail Nipper, 4-1/2" (11.4 cm), straight jaws, single spring, chrome Nail Nipper, 5" (12.7 cm), straight jaws, single spring, chrome Nail Nipper, 6" (15.2 cm), straight jaws, single spring, chrome Tissue and Cuticle Nipper, 4" (10.2 cm), convex jaws, double spring, chrome Tissue and Cuticle Nipper, 4-1/2" (11.4 cm), convex jaws, double spring, chrome Tissue and Cuticle Nipper, 5" (12.7 cm), convex jaws, double spring, chrome

www.miltex.com

13

chrome nail instruments

Chrome Instruments are ideal for home care patient maintenance.

IMPORTANT: Corrosion and/or discoloration can occur if stainless steel and other dissimilar metals (e.g., chrome-plated) are sterilized together. Separate instruments prior to autoclaving.

40-200

40-205 40-207

40-220

40-425

40-435

40-445

REF 40-200 40-205 40-207 40-220 40-425 40-435 40-445

Description Nail Nipper, 4-1/2" (11.4 cm), concave jaws, single spring, chrome Nail Nipper, 4-1/2" (11.4 cm), concave jaws, barrel spring, chrome Nail Nipper, 5-1/2" (14 cm), concave jaws, barrel spring, chrome Tissue and Cuticle Nipper, 4" (10.2 cm), straight jaws, ring handles, chrome Nail Scissors, 3-1/2" (8.9 cm), curved blades, chrome Cuticle Scissors, 3-1/2" (8.9 cm), curved blades, standard pattern, chrome Cuticle Scissors, 3-1/2" (8.9 cm), curved blades, extra delicate, chrome

14

www.miltex.com

Removal of hyperkeratotic debris from nail groove. May be useful to probe abscess sinus tracts.

curettes

40-54

40-57/0

40-57/1

40-57/2

40-57/3

40-58/0 40-58/1 40-58/2

40-58/3 40-58/1-2 40-58/1-3

REF 40-54 40-57/0 40-57/1 40-57/2 40-57/3 40-58/0 40-58/1 40-58/2 40-58/3 40-58/1-2 40-58/1-3

Description MILTEX® Verruca Curette, 5" (12.7 cm), 4 mm cup Curette without Hole, 5-1/2" (14 cm), extra small, 1 mm diameter Curette without Hole, 5-1/2" (14 cm), small, 1.5 mm diameter Curette without Hole, 5-1/2" (14 cm), medium, 2 mm diameter Curette without Hole, 5-1/2" (14 cm), large, 2.5 mm diameter Curette with Hole, 5-1/2" (14 cm), extra small, 1 mm diameter Curette with Hole, 5-1/2" (14 cm), small, 1.5 mm diameter Curette with Hole, 5-1/2" (14 cm), medium, 2 mm diameter Curette with Hole, 5-1/2" (14 cm), large, 2.5 mm diameter Curette Excavator, 5-1/2" (14 cm), double end, with holes, 1.5 mm and 2 mm Curette Excavator, 5-1/2" (14 cm), double end, with holes, 1.5 mm and 2.5 mm

Items in bold represent the most popular patterns.

www.miltex.com

15

chisels & knives

40-07

40-09

40-11

40-15

40-19

40-31

40-43

40-45

40-47

REF 40-07 40-09 40-11 40-15 40-19 40-31 40-43 40-45 40-47

Description MILTEX Chisel, 5" (12.7 cm) solid octagon handle, curved, 13 mm edge MILTEX Chisel, 5" (12.7 cm) solid octagon handle, curved, 18 mm edge MILTEX Chisel, 5" (12.7 cm) solid octagon handle, curved, 8 mm edge MILTEX Chisel, 5" (12.7 cm) solid octagon handle, curved, 15 mm edge MILTEX Knife, 5" (12.7 cm) solid octagon handle, straight back, 25 mm curved edge MILTEX Corn Knife, 5" (12.7 cm) solid octagon handle, heavy, 35 mm blade MILTEX Golf Stick Knife, 5" (12.7 cm) solid octagon handle, forward cutting edge MILTEX Soft Corn Spoon Knife, 5" (12.7 cm) solid octagon handle, straight blade MILTEX Soft Corn Spoon Knife, 5" (12.7 cm) solid octagon handle, curved blade

Items in bold represent the most popular patterns.

16

www.miltex.com

specialty INSTRUMENTS

40-60

40-62

40-73

40-75

40-59

40-61

40-67

40-69

40-71

40-79

40-81

40-83

21-430

REF 40-59 40-60 40-61 40-62 40-67 40-69 40-71 40-73 40-75 40-79 40-81 40-83 21-430

Description Nail Splitter, 5" (12.7 cm), straight, 2 mm wide Nail Splitter, 5" (12.7 cm), angled, 2 mm wide Nail Splitter, 5" (12.7 cm), straight, 3.5 mm wide Nail Splitter, 5" (12.7 cm), angled, 3.5 mm wide Hand Chisel, 5" (12.7 cm), curved edge, 6 mm wide Elevator, 5" (12.7 cm), curved blade, semi sharp Nucleus Knife, 5" (12.7 cm), 2 mm Nucleus Knife, 5" (12.7 cm), 3 mm Nucleus Knife, 5" (12.7 cm), 4 mm Gouge, 5" (12.7 cm), round tip, 2.5 mm wide Ingrown Nail Shaver, 5" (12.7 cm), fenestrated blade with inside cutting edge Ingrown Nail Cutter, 5" (12.7 cm), sharp hook edge MILTEX Tissue Twist Hook, 5-1/2" (14 cm)

Items in bold represent the most popular patterns.

www.miltex.com

17

specialty INSTRUMENTS

40-89

40-90

40-91

40-92

40-93

40-94

REF 40-89 40-90 40-91 40-92 40-93 40-94 40-96

Description Probe and Excavator, 6" (15.2 cm), blunt probe and blunt hook end Packer and Excavator, 5-1/2" (14 cm), 2 X 25 mm packer and blunt hook end Spatula and Packer, 6" (15.2 cm), oval spatula 7 mm wide and 2 X 25 mm packer Probe and Packer, 6" (15.2 cm), blunt probe and 2 X 25 mm packer Nail or Bone Rasp, 6-3/4" (17.1 cm), double end, backwards cutting LOCKE Elevator, 4-1/2" (11.4 cm), small blade, 3 X 15 mm LOCKE Elevator, 5" (12.7 cm), large blade, 5 X 20 mm

Items in bold represent the most popular patterns.

18

www.miltex.com

40-96

Ideal for sesamoidectomy and releasing plantar capsular adhesions.
9D-123

crown & collar scissors

9-122

9-120

9D-134

9D-135

9D-121

9D-132

9D-133

REF 9-120 9-122 9D-121 9D-123 9D-132 9D-134 9D-133 9D-135

Description MILTEX® Crown and Collar (wire cutting) Scissors, 4-3/4" (12.1 cm), straight, one serrated blade MILTEX® Crown and Collar (wire cutting) Scissors, 4-3/4" (12.1 cm), curved, one serrated blade MILTEX® Crown and Collar (wire cutting) Scissors, 4-3/4" (12.1 cm), straight MILTEX® Crown and Collar (wire cutting) Scissors, 4-3/4" (12.1 cm), curved MILTEX® Crown and Collar (wire cutting) Scissors, 4-1/4" (10.8 cm), straight, one serrated blade MILTEX® Crown and Collar (wire cutting) Scissors, 4-1/4" (10.8 cm), curved, one serrated blade MILTEX® Crown and Collar (wire cutting) Scissors, 4-1/4" (10.8 cm), straight MILTEX® Crown and Collar (wire cutting) Scissors, 4-1/4" (10.8 cm), curved

www.miltex.com

19

podiatric specialty scissors

40-465

1704

1706

40-260

40-460

1700

1702

REF 40-260 40-460 40-465 1700 1704 1702 1706

Description Ingrown Nail Splitting Scissors, 6" (15.2 cm), stainless Moleskin and Felt Scissors, 7-1/2" (19.1 cm), sharp/blunt points, straight Moleskin and Felt Scissors, 7-1/2" (19.1 cm), sharp/blunt points, curved Utility Scissors, 6-1/2" (16.5 cm), straight, sharp/blunt, one serrated blade, extra heavy Utility Scissors, 6-1/2" (16.5 cm), curved, sharp/blunt, one serrated blade, extra heavy Utility Scissors, 6-1/2" (16.5 cm), straight, blunt/blunt, one serrated blade, extra heavy Utility Scissors, 6-1/2" (16.5 cm), curved, blunt/blunt, one serrated blade, extra heavy

Items in bold represent the most popular patterns.

20

www.miltex.com

Ideal for minimal incision digital exostectomy.

shannon bone burs

40-1350

40-1351

40-1352

REF 40-1350 40-1351 40-1352

Description SHANNON Handpiece Bone Burs, stainless, standard pattern, no. 43, for regular Handpiece SHANNON Handpiece Bone Burs, stainless, standard pattern, no. 44, for regular Handpiece SHANNON Handpiece Bone Burs, stainless, pattern no. 44, gold titanium nitride coated, for regular Handpiece

Items in bold represent the most popular patterns.

www.miltex.com

21

bone files

40-1370 40-1381

40-1382

40-1385

40-1371 40-1380

40-1375

40-2800

40-2801 40-2802

REF 40-1370 40-1381 40-1382 40-1385 40-1371 40-1380 40-1375 40-2800 40-2801 40-2802

Description Bone File, double end no. 10 pattern, 7" (17.8 cm), plain serrations Bone File, double end no. 12 Howard pattern, 7" (17.8 cm), plain serrations Bone File, double end no. 12A Howard pattern, 7" (17.8 cm), one end plain, other end cross serrated Bone File, double end no. 12CA Howard BELL pattern, 7" (17.8 cm), cross serrations Bone File, double end no. 33 pattern, 7" (17.8 cm), plain serrations Bone File, double end no. 45 Miller pattern, 7" (17.8 cm), plain serrations Bone File, double end no. 64 Miller pattern, 7" (17.8 cm), plain serrations POLOKOFF Bone File, 7-1/4" (18.4 cm), double end, narrow pattern (POL-1) POLOKOFF Bone File, 6" (15.2 cm), short head, fine serrations (POL-2) POLOKOFF Bone FIle, 6-1/2" (16.5 cm), long head, medium serrations

Items in bold represent the most popular patterns.

22

www.miltex.com

rasps

21-354

21-369

21-370

21-330

21-338

21-342

21-343

21-346 21-348

21-352

21-360

21-368

REF 21-330 21-338 21-342 21-343 21-346 21-348 21-352 21-354 21-360 21-368 21-369 21-370

Description JOSEPH Rasp, 6-1/4" (15.9 cm), fine cross serrations COTTLE Rasp, 8" (20.3 cm), backward cutting MALTZ Nasal Rasp, 7" (17.8 cm), backward cutting MALTZ Rasp, 8-1/4" (21 cm), improved double end pattern, forward and backward cutting AUFRICHT Glabella Rasp, 7-1/8" (18.1 cm), forward cutting AUFRICHT Glabella Rasp, 7-1/8" (18.1 cm), backward cutting LEWIS Nasal Rasp, 7-1/2" (19.1 cm), fine teeth, backward cutting LEWIS Nasal Rasp, 7-1/2" (19.1 cm), coarse teeth, backward cutting GALLAHER Rasp, 6-1/2" (16.5 cm), coarse teeth, straight FOMON Rasp, 8-1/4" (21 cm), double ended, 4-sided, fine and coarse teeth, both in flat and convex FOMON Rasp, 8-1/4" (21 cm), double ended, coarse FOMON Rasp, 8-1/4" (21 cm), double ended, fine

Items in bold represent the most popular patterns.

www.miltex.com

23

elevators

21-62

21-63

21-64

21-68

21-72

26-1403

26-1410

26-1412

REF 21-62 21-63 21-64 21-68 21-72 26-1403 26-1410 26-1412

Description MCKENTY Elevator, 6" (15.2 cm), curved tip, 4 mm wide MCKENTY Elevator, 6" (15.2 cm), curved tip, 5 mm wide JOSEPH Periosteal Elevator, 7" (17.8 cm), strong curve, 6.5 mm FOMON Periosteal Elevator, 6-1/4" (15.9 cm), slightly curved blade, 4.5 mm wide, standard pattern COTTLE Skin Elevator, 7-1/2" (19.1 cm), slightly curved blade 9 mm wide CUSHING "Little Joker" Periosteal Elevator, 6" (15.2 cm) LANGENBECK Periosteal Elevator, 7-1/2" (19.1 cm), narrow model, 7 mm wide blunt blade LANGENBECK Periosteal Elevator, 7-1/2" (19.1 cm), wide model, 17 mm wide sharp blade

Items in bold represent the most popular patterns.

24

www.miltex.com

elevators

27-744 27-746

27-752

27-753

27-754

18-1968

DELOHL

DELS23

73-62

REF 27-744 27-746 27-752 27-753 27-754 18-1968 DELOHL DELS23 73-62

Description SAYRE Periosteal Elevator, 6-3/4" (17.1 cm), one straight blunt and one curved sharp end SAYRE Periosteal Elevator, 6-3/4" (17.1 cm), one straight blunt and one curved blunt end CREGO Periosteal Elevator, 8" (20.3 cm), slightly curved blade 7 mm CREGO Periosteal Elevator, 8" (20.3 cm), fully curved blade 7 mm CREGO Periosteal Elevator, 8" (20.3 cm), fully curved blade 14 mm FREER Elevator, 7" (17.8 cm), double end sharp and blunt blades 5 mm wide OHL Periosteal Elevator, 7" (17.8 cm), double end, 6 mm wide sharp rounded and pointed blades 23 SELDIN Periosteal Elevator, 7-3/4" (19.7 cm), double end, slightly curved blades 10 mm and 13 mm wide MILTEX® Periosteal Elevator, 6" (15.2 cm), double end, slightly curved blade 6 mm wide and straight spear point rounded blade 3 mm wide

Items in bold represent the most popular patterns.

www.miltex.com

25

metatarsal elevators
Releasing plantar plate adhesions. Assists in freeing the phalanx base during implant surgery. Deglove metatarsal head.

40-2850

40-2851

40-2852

40-2853

40-2854

REF 40-2850 40-2851 40-2852 40-2853 40-2854 40-2855

Description MILTEX® Metatarsal Elevator, 6-3/8" (16.2 cm), blade 9 mm wide MILTEX® Metatarsal Elevator, 6-3/8" (16.2 cm), blade 11 mm wide MILTEX® Metatarsal Elevator, 6-3/8" (16.2 cm), blade 13 mm wide MILTEX® Metatarsal Elevator, 6-3/8" (16.2 cm), blade 15 mm wide MILTEX® Metatarsal Elevator, 6-3/8" (16.2 cm), blade 17 mm wide MILTEX® Metatarsal Elevator Kit, contains 1 of each size

Items in bold represent the most popular patterns.

26

www.miltex.com

clamps &tendon forceps

40-1800

40-1802

27-1016

REF 40-1800 40-1802 27-1016

Description LOCKE Phalangeal Clamp, 6" (15.2 cm) ROSENBLOOM Sesamoidectomy Clamp, 7" (17.8 cm) MILTEX® Tendon Pulling Forceps, 5" (12.7 cm), curved shaft, alligator type

www.miltex.com

27

bone clamps & elevators
Mini-Hohmann Retractors are ideal for ORIF ofmetatarsal and fibular fractures.

27-214

27-216 27-217

27-213

27-215

27-218

27-47

27-990 27-992

REF 27-213 27-214 27-215 27-216 27-217 27-218 27-47 27-990 27-992

Description Mini-HOHMANN Retractor, 6-1/4" (15.9 cm), blade 6 mm wide Mini-HOHMANN Retractor, 6-1/4" (15.9 cm), blade 8 mm wide HOHMANN Retractor, 9-1/4" (23.5 cm), blade 10 mm wide HOHMANN Retractor, 9-1/4" (23.5 cm), blade 18 mm wide HOHMANN Retractor, 9-1/4" (23.5 cm), blade 25 mm wide HOHMANN Retractor, 9-1/4" (23.5 cm), blade 43 mm wide LAMBERT-LOWMAN Bone Clamp, 8" (20.3 cm), 2 X 2 prong jaws 1-3/8" (3.5 cm) wide jaws MARTIN Cartilage Clamp, 7" (17.8 cm) MARTIN Cartilage Clamp, 8" (20.3 cm)

Items in bold represent the most popular patterns.

28

www.miltex.com

diagnostic instruments

1-200

1-202

1-220

1-3200

18-660

27-201

1-226

19-100 19-102 19-104

19-106 19-108

19-120

REF 1-200 1-202 1-220 1-3200
18-660 27-201 1-226 19-100 19-102 19-104 19-106 19-108 19-120

Description TAYLOR Percussion Hammer, 7" (17.8 cm), pediatric size, solid handle TAYLOR Percussion Hammer, 7-1/2" (19.1 cm), standard size, solid handle, chrome BUCK Neurological Hammer, 7-3/4" (19.7 cm), with brush and needle (screw into handle), chrome MILTEX® Fiberglass Tape Measure, 1/4" (6.4 mm) wide, graduated to 60" (152.4 cm) on one side, to 150 cm on other side. Plastic case with pushbutton tape return Flexible Ruler, stainless, 6" (15.2 cm) X 1/2" (1.3 cm), graduated in 1/32" (0.8 mm) fractions and mm MILTEX® Pin and Wire Gauge WARTENBERG Neurological Pin Wheel, 7" (17.8 cm) MILTEX® Tuning Forks, Aluminum Alloy, C-64 Vibrations MILTEX® Tuning Forks, Aluminum Alloy, C-128 Vibrations MILTEX® Tuning Forks, Aluminum Alloy, C-256 Vibrations MILTEX® Tuning Forks, Aluminum Alloy, C-512 Vibrations MILTEX® Tuning Forks, Aluminum Alloy, C-1024 Vibrations MILTEX® Tuning Forks, Aluminum Alloy, Set of 5 Tuning Forks, C-128, C-256, C-512, C-1024 and C-2048 in fitted molded vinyl zippered case

Items in bold represent the most popular patterns.

www.miltex.com

29

disposable products

Biopsy Punch, Sterile
Now you can have the convenience of disposable punches along with the quality you expect from Miltex. Miltex offers an extensive product line of sterile disposable biopsy punches that are manufactured from the finest grade surgical steel to ensure superior cutting every time.
· Seamless, stainless steel, razor-sharp cutting edges eliminate torn or pulled biopsies · Ribbed handle provides comfort and control · Convenience of disposables, single-use · Sterile, 5-year shelf life · Sizes clearly marked on each punch · Individual color-coded blister packs

Biopsy Punch with Plunger System
· Effortless ejection of lodged specimens · Available in boxes of 25 · Color-coded by size - 5 sizes available

Biopsy Punch, Standard
· Each dispenser box contains 50 punches
· Ten sizes for a wide range of applications
· Assortment box contains 10 each of the following sizes: 2mm, 3mm, 4mm, 5mm, and 6mm

33-31AA-P/25

33-31A-P/25

33-31-P/25 33-32-P/25

REFSize

33-31AA-P/25 1.0 mm w/plunger

33-31A-P/25 1.5 mm w/plunger

33-31-P/25

2.0 mm w/plunger

33-32-P/25 3.0 mm w/plunger

33-34-P/25 4.0 mm w/plunger

33-34-P/25

30

www.miltex.com

33-31A 33-31 33-31B 33-32 33-33 33-34 33-35 33-36
33-37

33-31AA

REFSize

33-31AA 1.0 mm

33-31A

1.5 mm

33-31

2.0 mm

33-31B

2.5 mm

33-32

3.0 mm

33-33

3.5 mm

33-34

4.0 mm

33-35

5.0 mm

33-36

6.0 mm

33-37

8.0 mm

33-38

Assorted sizes*

Each box contains 50 sterile color-coded blister packs.

*10 each of 2mm, 3mm, 4mm, 5mm, and 6mm.

Miltex BiopBladeTM, Sterile
· Ideal for skin/tissue saucerization and shave biopsy
· Used in dermatology, podiatry, family practice and plastic surgery
· Incorporates a super sharp blade with rear finger guard
· Flexible design allows the blade to be positioned at any angle for the intended procedure
· Disposable, one-time use only
· Sterile, 5-year shelf life

REF 33-100

Miltex BiopBladeTM, 50 per box

disposable products

Dermal Curettes, Sterile
· Seamless, stainless steel, semi-sharp cutting edge featuring a unique symmetrically ground beveled edge
· Textured handle provides better comfort and control · Sterile, 5-year shelf life · Individually packaged in peel-apart pouches · Convenience of disposables, single-use · Sizes clearly marked on each curette · Each dispenser box contains 50 curettes · Five sizes available for a wide range
of applications

REF 33-52 33-53 33-54 33-55 33-57

Size 2.0 mm 3.0 mm 4.0 mm 5.0 mm 7.0 mm

33-57

33-52 33-53 33-54 33-55 33-57

www.miltex.com

31

disposable products

Safety Scalpels, Sterile

· Complies with OSHA directive for the Needlestick Safety & Prevention Act

· Stainless steel, razor-sharp cutting edge for superior cutting and clean incisions

4-510

· Pre-assembled, fully retractable scalpel blade is user activated

· Sterile, 5-year shelf life

4-510

4-515

· Individually packaged in sealed peel-apart pouches

· Convenience of disposables, single-use
· Metric ruler on each scalpel to assist in determining incision length

4-511

4-515C

· Sizes clearly marked on each scalpel blade

· Each dispenser box contains 10 safety scalpels

· Six sizes available

4-512

4-522

Directions For Use

REFSize 4-510 10 4-511 11 4-512 12 4-515 15 4-515C 15C Angled Blade 4-522 22

Gently push slider to right and completely forward in one simple motion. Blade locks into place with audible confirmation. To retract, push slider to right and back to return blade to original protected position.

Scalpels, Standard, Sterile
· Stainless steel, razor-sharp cutting edge for superior cutting and clean incisions
· Safety sleeve for blade protects you and the blade
· Sterile, 5-year shelf life
· Individually packaged in sealed peel-apart pouches
· Convenience of disposables, single-use
· Sizes clearly marked on each scalpel blade
· Each dispenser box contains 10 scalpels
· Eight sizes available
REFSize 4-410 10 4-411 11 4-412 12 4-415 15 4-420 20 4-421 21 4-422 22 4-423 23

4-410 4-410 4-411 4-412 4-415

4-420 4-421 4-422 4-423

32

www.miltex.com

disposable products & instruments

Surgical Blades, Sterile

Carbon or Stainless Steel · Razor-sharp cutting edges for superior
cutting and clean incisions · Sterile, 5-year shelf life · Individually packaged in foil peel packs · Convenience of disposables, single-use · Sizes clearly marked on each blade · Available in carbon and stainless steel ·Each dispenser box contains 100 blades ·Eleven sizes available

10

11

12

12B 15 15C

CS*

SS**

REF

REF

Size

4-110

4-310

10

4-111

4-311

11

4-112

4-312

12

4-112B

4-312B

12B

4-115

4-315

15

4-115C

4-315C

15C

*Carbon Steel ** Stainless Steel B is a double edged blade C is an angled blade

20

21

22

23

25

CS* REF. 4-120 4-121 4-122 4-123 4-125

SS**

REF

Size

4-320

20

4-321

21

4-322

22

4-323

23

4-325

25

*Carbon Steel ** Stainless Steel

Scalpel Handles
For your convenience, Miltex, Inc. offers a wide array of scalpel blade handles and the Miltex® Blade Safe Remover to aid in the safe removal of blades and to help protect against accidental cuts and punctures.

Fits Blades Fits Blades

REF

Description

10-15C

20-25

4-7

No. 3, stainless steel 5"

x

-

graduated in mm and cm

4-7R

No. 3, Nickel 5"graduated

x

-

in mm and cm

4-8

No. 4, stainless steel 5.375"

-

x

graduated in mm and cm

4-8R

No. 4, Nickel 5.375" graduated

-

x

in mm and cm

4-9

No. 7, stainless steel 6.5"

x

-

4-10*

No. 3L, stainless steel 8.5"

x

-

4-11*

No. 4L, stainless steel 8.5"

-

x

4-12*

No. 3LA, stainless steel, angled 8.5"

x

-

4-16

No. 9, stainless steel 4.5"

x

-

4-17

Siegel, stainless steel, round

x

-

handle 5.75"

4-18

No. 5, plastic handle 5", green

x

-

4-20

No. 6, plastic handle 5.25", red

-

x

4-30** No. 3, fitting blades 5.5", grey

x

-

4-31** No. 4, fitting blades 5.5", blue

-

x

4-400*** Miniature Blade Handle w/chuck

3-3/4", round knurled (3K type)

4-401*** Miniature Blade Handle w/self-

locking chuck, 3-3/4", round knurled (3K type)

4-405*** Self-locking chisel blade handle, stainless steel 5.31"

4-100

4-100

Blade Safe surgical blade remover for any style handle

* For deep surgery ** EZ-OFF reusable plastic knife handles, autoclavable, permitting quick and safe removal of blade, 10/box *** Fits Mini Blade (blades not available from Miltex, Inc.)

4-7 4-7R 4-8 4-8R 4-9
4-10
4-11
4-12
4-16 4-17 4-18
4-20
4-30 4-31 4-400 4-401 4-405

www.miltex.com

33

INSTRUMENT MAINTENANCE

Miltex® Instrument Care & Cleaning Products

The Miltex® care and cleaning product portfolio is designed to provide optimum cleaning performance and will help to prolong the service life of valuable surgical instrumentation.

Miltex® Instrument Prep Enzyme Foam

Ready-to-use foaming spray for pre-cleaning of soiled instruments and scopes (rigid or flexible). Ideal for applications where instrument cleaning is not immediately available. Simply spray on instruments until ready for decontamination and cleaning.

REF 3-760

Description 24 oz. (0.71 liter) spray bottles (case of 12)*

Miltex® EZ-Zyme®All Purpose Enzyme Cleaner

Ideal for cleaning hard to remove proteinaceous (mucus & tissue) and lipid (fatty) materials from the surfaces of surgical and dental instruments, linen, water submersible equipment, or where mechanical scrubbing is impractical.
·Easy to Use · Neutral pH · Multi-use as an instrument presoak, ultrasonic cleaner, laundry
presoak and evacuation system cleaner · Space-saving or bulk packaging options

REF 3-750
3-755

Description
3/4 oz. (22 ml) packets (dispenser box of 32) Contents of 1-box makes 32 gallons of solution 1-gallon bottle (3.79 liter) Contents of 1-gallon container makes 170 gallons of solution

Miltex® Surgical Instrument Cleaner

Super concentrate formula for manual and ultrasonic cleaning or soaking of surgical instruments, accessories and glassware.
· Neutral pH · Biodegradable · Rinses free, leaves no residue · Phosphate-free · Concentrated

REF 3-720
3-725
3-726

Description
8 fl. oz. (0.24 liter) bottles (case of 12)* Contents of one 8 oz. bottle makes 32 gallons of solution 1-gallon bottle (3.79 liter) Contents of 1-gallon container makes 512 gallons of solution 1/4 fl. oz. (7.4 ml) packets (dispenser box of 80) Contents of 1-box makes 80 gallons of solution

*(Contact Distributor for availability of individual units)

34

www.miltex.com

3-760
3-755 3-750
3-725 3-720 3-726

INSTRUMENT MAINTENANCE

Miltex® Surgical Instrument Cleaner & Lubricant

A dual-purpose instrument cleaner and lubricant. Chemically engineered for use as a presoak or for manual cleaning, washer/decontaminators, ultrasonic cleaners and cart washers.
· Cleaner & Brighter Instruments · Removes Stains, Blood and Mineral Deposits · Biodegradable · Concentrate, Lower Cost Per Use

REF 3-710

Description 1 Gallon (128 fl. oz.) 3.79L (see label for concentration rates)

3-710

Miltex® Instrument Lubricant

A water emulsible soaking agent works to extend the life of surgical instruments. Concentrated non-silicone lubricant and rust inhibitor. Use daily to keep moving parts operating smoothly.
· Formulated to extend the working life of surgical instruments · Helps Prevent Corrosion · Formulated with gentle, non-aggressive ingredients · Frees Up Box Locks - Lubricates moving parts of surgical instruments

REF 3-705

Description 1 Gallon (128 fl. oz.) 3.79L (see label for concentration rates)

3-705

Miltex® Spray Lube (Surgical Instrument Lubricant)

Pre-mixed, non-silicone and anti-corrosive formula in a ready to use 8 oz. spray pump bottle. Steam permeable and water soluble. Helps prevent spotting, staining and rusting. Lubricates instrument box locks, screw locks, scissors blades and any other metal on metal moving parts.

REF 3-700

Description 8 fl. oz. (0.24 liter) bottles (case of 12)*

*(Contact Distributor for availability of individual units)

3-700

www.miltex.com

35

INSTRUMENT MAINTENANCE

Miltex® Surgical Instrument Stain Remover
Powder formula removes stains, tarnish and restores luster to surgical instruments, autoclaves, ultrasonic cleaners, stainless steel countertops, etc. Ideal for use on stainless steel, chrome, nickel, brass, copper and silver.
·Effective on instruments, autoclaves, ultrasonic cleaners or any stainless steel, tile or plated surface
·Will not harm instrument surfaces ·Easy, fast, convenient to use ·Economical - a little goes a long way

REF 3-740

Description 3 oz. (85 grams), (case of 12)*

3-740

Miltex® Nylon & Stainless Steel Brushes
· Nylon bristles for effective cleaning of instrument box locks · Stainless steel bristles for cleaning serrations · Autoclavable
3-1000

21-379

3-1001

REF 3-1000 3-1001 21-379

Description MILTEX® Instrument Cleaning Brushes 7-1/4" (18.4 cm), Nylon Bristles (Set of 3) MILTEX® Instrument Cleaning Brushes 7-1/4" (18.4 cm), Stainless Steel Bristles (Set of 3) Stainless Wire Brush, 6-1/4" (15.9 cm)

*(Contact Distributor for availability of individual units)

36

www.miltex.com

INSTRUMENT MAINTENANCE

Miltex® Instrument Care Kit System
A great way to try various Miltex products!

REF 3-800

Description Spray Lube (3-700), Surgical Instrument Cleaner (3-720), Surgical Instrument Stain Remover (3-740), Instrument Care DVD (3-810), Nylon & Stainless Steel Brushes

Miltex® Instrument Care Training

25-minute Instructional DVD assists practitioners and staff to properly care for instruments and to keep them in top working condition. DVD offers step-by-step guidance on handling, cleaning, rinsing, inspecting, lubricating and sterilizing surgical instruments.
Step-by-step poster provides easy instructions to clean and prepare instruments for sterilization.
Try a variety of our popular cleaning products with a H.I.P. sample box.

REF 3-810 SURGHIPPOST SURGHIPBOX

Description Miltex® Instrument Care DVD Miltex® H.I.P. Poster Miltex® H.I.P. Sample Box

Get h.i.P. with the Miltex healthy instrument Program

1. PRe-tReat
Instruments must remain moist to avoid blood, mucus or other bio burden, which may cause damage if allowed to dry on the instrument.
· Enzymatic solutions with neutral pH are preferred to pre-soak/hold instruments
· Never soak instruments overnight/weekend
· Never use disinfectant as a `'holding solution''
2. Rinse
Rinse instruments for 30 seconds under warm distilled or demineralized water. Tap water may leave spots on instruments.
3. cLeaning
An instrument may not be successfully sterilized if it is not completely clean. It is important that individuals cleaning instruments wear appropriate personal protective equipment (such as goggles or face shield, mask, gloves and apron).
Follow the steps below to ensure proper cleaning:
· Separate dissimilar metals · Inspect for functionality · Apply stain remover
(as needed)
accePted cLeaning Methods:
Ultrasonic (most effective) Manual Automatic Washers

4. Rinse and dRy
Rinse and dry instruments using surgical towels not treated with bleach or harmful chemicals.
5. LubRicate
Lubricant should be non-silicone based and water soluble. Never use industrial lubes.
Lubrication: · Maintains longevity · Helps prevent spotting,
staining, corrosion and sticking/tightness
Lube all metal to metal contact: · Hinges, box locks,
screws and blades · Lubricate weekly or more
often if possible
Types of Lubricant: Milk = 30 second dip ­ no rinse Spray = No rinsing
6. Package ­ WRaP
Before wrapping, check all instruments for functionality.
· Separate dissimilar metals · Instruments must be in the
open/unlocked position
Hinges/box locks can fracture during heat expansion if closed.
Wrap instruments in specialized bags, cassettes, surgical towels or containers with an indicator inside.
7. steRiLization
· Autoclave ­ Recommended · Chemical/Cold Sterilization ­ Not Recommended · Dry Heat ­ Not Recommended

For a complete list of other Miltex® Products, visit us online at www. miltex.com, contact customer service at 1.866.854.8300 or e-mail us at [email protected]

Miltex, Miltex Redefining Excellence and EZ-Zyme are registered trademarks of Miltex, Inc., a subsidiary of Integra LifeSciences Corporation. Tip-It is a trademark of Miltex, Inc. The Integra wave logo is a trademark of Integra LifeSciences Corporation. Copyright © 2009 Integra LifeSciences Corporation

MPM0409

SURG-HIP-POST

PRe-tReAt PRoduct Instrument Prep enzyme Spray Foam #3-760* 24 oz. (0.71 liter) spray bottle
NOTE: Products below can also be used during the Pre-Treat Step. Follow Manufacturer's recommendations.
cLeANINg PRoductS eZ-Zyme® All Purpose cleaner #3-750 32 single dose packets ­ ¾ oz. (22ml). Makes 32 gallons #3-755 1 gallon (3.79 liter, 128 oz.) with dispenser pump.
Makes 160 gallons
Instrument cleaner & Lubricant #3-710 1 gallon (3.79 liter, 128 oz.) with dispenser pump.
Makes 128 gallons Note: oNLY uP to 1-houR SoAk tIme.
Surgical Instrument cleaner #3-720* 8 oz. (0.24 liter). Makes 32 gallons #3-725 1 gallon (3.79 liter, 128 oz.) with dispenser pump.
Makes 512 gallons #3-726 80 single dose packets - ¼ oz. (7.4ml). Makes 80 gallons

StAIN RemovINg PRoduct Surgical Instrument Stain Remover 3-740* Powder formula (85grams)
LubRIcAtINg PRoductS Instrument Lubricant #3-705 1 gallon (3.79L, 128 oz.) milk. Makes 170 gallons #3-700* 8 oz. (0.24 liter) spray lube.
bRuSheS/PAckAgINg/WRAPPINg PRoductS Miltex offers a variety of additional products for use prior to autoclaving. Contact your distributor for more details on the following items:
Nylon & Stainless Steel brushes Miltex® tip-ItTM Instrument guards cSR Wrap Autoclave tape Steam Indicator Strips Miltex® cassettes Sterilization containers
* Part numbers are in case quantity. Contact your distributor for smaller unit packaging availability.

SURGHIPPOST

3-800 3-810

SURGHIPBOX

www.miltex.com

37

INSTRUMENT MAINTENANCE
SilitoneTM Color Bands
SilitoneTM color bands are made from medical-grade silicone and can withstand temperatures up to 450º F. SilitoneTM bands are expandable from 4 mm to 12 mm and are available in a variety of colors. 50 pieces per pack except kits.

Will work with ring-handled instruments!

REF VSTSA VSTSB VSTSD VSTSG VSTSK VSTSL VSTSN VSTSP VSTSR VSTSU VSTSW VSTSY VST VSTA

Description Grey - Pack of 50 pieces Blue - Pack of 50 pieces Gold - Pack of 50 pieces Green - Pack of 50 pieces Black - Pack of 50 pieces Light Blue - Pack of 50 pieces Brown - Pack of 50 pieces Pink - Pack of 50 pieces Red - Pack of 50 pieces Purple - Pack of 50 pieces White - Pack of 50 pieces Yellow - Pack of 50 pieces Kit of 12 colors - 480 pieces Kit of 12 colors - 120 pieces (10 of each color)

(Exercise caution when applying color bands to instruments with sharp points.)

38

www.miltex.com

Tape N' TellTM Adhesive Strips
TheTape N'TellTM adhesive strips are ideal for color coding instruments and procedural kits.

REF 017-48220 017-48221 017-48222 017-48223 017-48224 017-48225 017-48226 017-48227 017-48230

Description TAPE N' TELLTM WHITE TAPE N' TELLTM YELLOW TAPE N' TELLTM RED TAPE N' TELLTM BLUE TAPE N' TELLTM GREEN TAPE N' TELLTM BLACK TAPE N' TELLTM ORANGE TAPE N' TELLTM BROWN TAPE N' TELLTM 8 ASSorTed

INSTRUMENT MAINTENANCE

Tip-ItTM Instrument Protectors
Tip-ItTM Instrument Protectors protect instrument tips and edges from damage during handling and sterilization. · PVC medical grade plastic · Latex-free material · Large holes (vented styles) to reduce vacuum and moisture build up for easy removal from instrument · Steam and gas sterilizable · 50 per pack

Clear, Vented

Solid, Vented

Tinted, Vented

Size 1 2 3 4 5

6

7

8

9

Solid, Non-Vented

Size 1 2 3 4 5

6

7

8

9

REF REFREFREF

ClearTintedSolidSolidSize

Vented

Vented

VentedNon-VentedDimension

Code

3-2501C

3-2501T

3-2501V

3-2501

1/16" x 3/4" (1.6 mm x 19 mm)

1

3-2502C

3-2502T

3-2502V

3-2502

5/64" x 3/4" (2 mm x 19 mm)

2

3-2503C

3-2503T

3-2503V

3-2503

7/64" x 3/4" (2.8 mm x 19 mm)

3

3-2504C

3-2504T

3-2504V

3-2504

1/8" x 1" (3.2 mm x 25.4 mm)

4

3-2505C

3-2505T

3-2505V

3-2505

3/16" x 1" (4.8 mm x 25.4 mm)

5

3-2506C

3-2506T

3-2506V

3-2506

13/32" x 3/4" (10.3 mm x 19 mm)

6

3-2507C

3-2507T

3-2507V

3-2507

1/16" x 3/8" x 1" (1.6 mm x 9.5 mm x 25.4 mm) 7

3-2508C

3-2508T

3-2508V

3-2508

5/64" x 5/8" x 1" (2 mm x 16 mm x 25.4 mm)

8

3-2509C

3-2509T

3-2509V

3-2509

1/8" x 1" x 1" (3.2 mm x 25.4 mm x 25.4 mm)

9

3-2510C

3-2510T

3-2510V

3-2510

Assorted, equal number of sizes plus 5

-

* Color does not apply to clear vented pattern

Color White* Blue* Green* Red* Yellow* Maroon* Orange* Brown* Black* -

www.miltex.com

39

surgical cassettes & mats

Miltex® Instrument Storage System featuring The "Tuck-AwayTM" Lid

Latex-Free Silicone Mats

1.Unique flow-through design.
2. Medical grade silicone strip provides instrument retention when lid is closed.
3. Full length hinge provides stable and secure attachment to cassette.
4. Quick and easy push button release provides a positive lock when closed.
5. Pre-stamped tabs allow for custom coding of cassettes.
6. Double-hinged lid folds under cassette for easy storage during use.
7. Self-lubricating plastic hinge pin will not corrode and provides smooth mechanical movement.
8. Passivated stainless steel provides corrosion protection and an aesthetic finish.

UNIVERSAL CASSETTE WITHOUT MAT

Item# 4-6835 4-083000 4-084000 4-085000 4-089100 4-008122 4-008115 4-009126 4-6815

Size 6-1/2 x 6-1/4 x 1-3/16 8 x 3-13/16 x 1-3/16 8 x 4-7/8 x 1-3/16 8 x 6 x 1-3/16 8 x 9 x 1-3/16 8 x 11 x 1-3/16 8 x 11 x 2 9-1/8 x 13 x 1-3/16 15 x 8-1/4 x 1-3/16

Slimline Series WITHOUT MAT

3-072007

7 x 2-5/8 x 11/16*

3-082008

8 x 2-5/8 x 11/16*

STDSL27

7 x 2-5/8 x 1*

3-072014

7 x 4-5/8 x 11/16*

*Single-hinge design

40

www.miltex.com

1. The raised mat (or feet) assures adhesion of the mat to the tray surface.
2. Holes positioned on mat for proper drainage. 3. Soft cushion fingers protect your instrument investment. 4. Customized to fit perfectly into Miltex® Cassettes.

MAT ONLY
Item# 4-6835MAT* 4-083000MAT 4-084000MAT 4-085000MAT 4-089100MAT* 4-008122MAT*
4-009126MAT* 4-6815MAT

Size 6-1/2 x 6-1/4 8 x 3-13/16 8 x 4-7/8 8 x 6 8 x 9 8 x 11
9-1/8 x 13 15 x 8-1/4

Description for Cassette 4-6835 for Cassette 4-083000 for Cassette 4-084000 for Cassette 4-085000 for Cassette 4-089100 for Cassette 4-008122 & 4-008115 for Cassette 4-009126 for Cassette 4-6815

sterilization products

Sterilization Products

Miltex® offers a wide range of sterilization products which can be used in conjunction with the Universal cassettes.

CSR Wrap

A suitable CSR wrap for steam, ETO gas, and radiation sterilization processes. CSR wraps are electronically inspected for defects such as pin holes and monitored for thickness consistency. CSR wraps are one of the lowest linting products available on the market.

Features include: · Resists memory · Allows faster steam penetration than muslin · Repels water and OR fluids · Low linting · Meets established standards for tensile strength and tear resistance · Excellent barrier to airborne bacteria · Accepts sterilization tape and labels · Biodegradable
Available in three sizes - 15", 20", and 24" square

2 1

Item# STD1515 STD2020 STD2424

Dimensions 15" x 15" 20" x 20" 24" x 24"

Case quantity 1000/case 500/case 500/case

1. CSR Wrap 2. Indicator Tapes

Indicator Tapes
Used to visually identify processed from unprocessed packs. Miltex IndicatorTapes are manufactured from a specially treated crêpe paper and are coated with a high performance, pressure-sensitive adhesive that will not come undone when subjected to wet or dry heat.
Features include: · Adheres to any kind of material · Distinctive color-change · Accommodates pack expansion during sterilization · Accepts labels and writing
Supplied in 60 yard rolls, Miltex® IndicatorTapes are available in steam, vapor, and dry heat styles.

Item# STDSTEAM STDDRY

Description 3/4" Steam, 60 yd. 1" Dry Heat, 60 yd.

Steam Indicator Strips
Per CDC guidelines, a chemical indicator should be used with each load in conjunction with routine spore testing.The Miltex® Steam Indicator Strip turns brown when sterilization conditions have been met and is certified for use with all steam sterilization processes. Packaged 250 strips per box, the Steam Indicator strips may be maintained as a permanent record of sterilization
Item# Description STDIND Steam Indicator Strips, 250/bx

www.miltex.com

41

stainless steelware

Sponge Bowls

REF 3-900 3-901 3-902 3-903 3-904 3-905 3-906

Size 4-5/16'' x 2-13/64'' (12 oz) 4-1/4" x 2" (16 oz) 5-5/8" x 2-9/32" (22 oz) 6-27/64" x 2-1/4"( 30 oz) 6-27/64" x 2-3/4" ( 36 oz) 7-9/16" x 3-3/16" ( 47 oz) 8-3/16" x 3-5/16" (64 oz)

Iodine & Medicine Cups

REF 3-912 3-913 3-914

Description Iodine Cup Iodine Cup Medicine Cup, Graduated

Size 3-5/16" x 2" ( 6 oz) 5-1/32" x 2-23/64" (14 oz) 2-5/32" x 2-5/32" (2 oz)

Tumbler

REF 3-907

Size 2-7/8 x 3-1/8 (7 oz)

Items in bold represent the most popular patterns.

42

www.miltex.com

Solution Basins

REF 3-908 3-909 3-910

Size 12-33/64" x 3-35/64" ( 4-1/2 qt) 13-25/32" x 4-17/32" (6 qt) 13-25/32" x 4-59/64" (7 qt)

stainless steelware

Forceps Jars

REF 3-915 3-916 3-917

Size 1-19/64" x 3-5/32" 2-3/16" x 4-21/64" 2-3/16" x 7-5/64"

Dressing Jars with Covers Cover included with jar

REF 3-953 3-954 3-955

Size 4" x 2-5/8" (1/2 qt) 5" x 6-3/8" (2 qt) 5-7/8" x 7-5/64" (3 qt)

Emesis Basins

REF 3-918 3-919 3-920

Size 7-7/8" x 3-3/4" x 1-19/64" (10 oz) 8-5/32" x 3-55/64" x 1-17/32" (12 oz) 9-23/32" x 4-51/64" x 1-11/16" (20 oz)

Instrument Trays

REF 3-934 3-935 3-936

Size 10" x 6-1/2" x 23/32", rolled edge 14" x 10" x 5/8", rolled edge 21-11/32" x 16-7/16" x 7/8", rolled edge

Perforated Mayo Trays

REF 3-921 3-922 3-924 3-925

Size 10" x 6-1/2" x 23/32" 14" x 10" x 5/8" 17" x 11-5/8" x 3/4" 19-11/64" x 12-23/32" x 33/64"

Items in bold represent the most popular patterns.

Non-Perforated Mayo Trays

REF 3-926 3-927 3-929 3-930

Size 10" x 6-1/2" x 23/32" 14" x 10" x 5/8" 17" x 11-5/8" x 3/4" 19-11/64" x 12-23/32" x 33/64"

www.miltex.com

43

stainless steelware

Instrument Trays & Covers cover sold separately

REF 3-945 3-946 3-947 3-948 3-949

Description Instrument Tray, 12, 2-1/2, Solid Instrument Tray, 12, 3-3/4, Solid Flat Cover, 12, For REF 3-945 & 3-946 Instrument Tray, 10, 1, Solid Flat Cover, 10, For REF 3-948

Size 12-23/32" x 10-27/64" x 2-1/2" 12-23/32" x 10-27/64" x 3-3/4" 12-29/32" x 10-35/64" x 7/16" 10-25/64" x 6-49/64" x 1-27/32" 10-15/32" x 6-61/64" x 7/16"

Cath Trays & Covers cover sold separately

REF 3-937 3-938 3-939 3-940 3-941 3-942 3-943 3-944

Description Cath Tray, 8 x 5 x 1 Cath Tray, 8-7/8 x 5 x 3 Flat Cath Cover, 8, For REF 3-937 & 3-938 Dome Cath Cover, 8, For REF 3-937 & 3-938 Cath Tray, 8 x 3 x 1-1/2, Narrow Dome Cath Cover, 8, Narrow, For REF 3-941 Cath Tray, 15-3/4 x 2-3/4 x 2, Long Dome Cath Cover, 15, Long, For REF 3-943

Items in bold represent the most popular patterns.

44

www.miltex.com

Size 8-25/32" x 4-61/64" x 1-49/64" 8-7/8" x 5" x 3" 8" x 5" x 7/16" 8" x 5" x 7/16" 8-35/64" x 3-5/64" x 1-1/2" 8-21/32" x 3-5/16" x 19/32" 15-3/4'' x 2-3/4'' x 2'' 15-13/16" x 3-1/32" x 29/32"

instrument stringers instrument stringers

3-70 to 3-74 3-81 to 3-85

3-75 to 3-80 3-86 to 3-89

REF 3-70 3-71 3-72 3-74 3-75 3-76 3-77 3-78 3-79 3-80 3-81 3-82 3-83 3-84 3-85 3-86 3-87 3-88 3-89 3-90 3-91 3-92 3-93 3-94 3-95 3-96 3-97 3-98 3-99

Description Stringer - Side Lock, Wide Stringer - Side Lock, Wide Stringer - Side Lock, Wide Stringer - Side Lock, Wide Stringer - Side Lock Stringer - Side Lock Stringer - Side Lock Stringer - Side Lock Stringer - Side Lock Stringer - Side Lock Stringer - Side Lock Stringer - Side Lock Stringer - Side Lock Stringer - Side Lock Stringer - Side Lock Stringer - Open U Stringer - Open U Stringer - Open U Stringer - Open U Stringer - Center Lock Stringer - Center Lock Stringer - Center Lock Stringer - Center Lock Stringer - Center Lock Stringer - Center Lock Stringer - Closed U Stringer - Closed U Stringer - Closed U Stringer - Closed U

Size 2-1/2" x 8" 2-1/2" x 10" 2-1/2" x12" 2-1/2" x16" 2-1/2" x 6" 2-1/2" x 8" 2-1/2" x 10" 2-1/2" x12" 2-1/2" x 16" 2-1/2" x 18" 5" x 8" 5" x 10" 5" x 12" 5" x 16" 5" x 18" 2-1/2" x 6" 2-1/2" x 8" 2-1/2" x 10" 2-1/2" x12" 2-1/2" x 6" 2-1/2" x 8" 2-1/2" x 10" 2-1/2" x12" 2-1/2" x 16" 2-1/2" x 18" 2-1/2" x 6" 2-1/2" x 8" 2-1/2" x 10" 2-1/2" x12"

3-90 to 3-95

3-96 to 3-99

Items in bold represent the most popular patterns.

www.miltex.com

45

Care & Cleaning process

Recommended Steps in Cleaning, Sterilization, & Maintenance of Surgical Instruments

1. HOLDING/PRESOAK Never hold instruments in a dry container. Doing so allows blood and debris to dry onto instrument surfaces and makes cleaning more difficult. If rinsing and decontamination processes are not immediately available, pre-treat instruments or hold them in a neutral pH holding/presoak enzymatic solution after patient use but before actual cleaning. Miltex® Instrument Prep Enzyme Foam (3-760) is a ready to use foaming spray for pre-cleaning soiled instruments and scopes. Simply spray the foam on instruments until they are ready for processing. Also, Miltex® EZZyme® (3-750 and 3-755) neutral pH all purpose multi-enzyme concentrate is ideal for instrument presoaking and pre-cleaning. As soon as possible, rinse and clean as follows:
2. RINSING (Always wear safety protection gear.) Immediately after surgery, remove organic materials by rinsing instruments under warm (not hot) running water. Rinse should remove most blood, fluids and tissue. Do not process dissimilar metals (stainless, copper, chrome plated, etc.) together.
Note: Disinfection can be included to protect medical personnel from contamination during cleaning; however, protection also can be accomplished by following standard precautions by wearing appropriate PPE as promulgated by OSHA & AORN.
3. CLEANING All blood, dried body fluids and tissue should be completely removed from instruments prior to sterilization. Several methods for removing these materials are available.
A. Soak: An enzymatic cleaner bath (soak) such as Miltex® EZ-Zyme® (3-750 and 3-755) or a solution of water and neutral pH (7) detergent such as Miltex® Surgical Instrument Cleaner (3-720, 3-725 and 3-726) is effective in removing organic material from instruments. Use distilled (demineralized) water, if possible. Instruments should be fully submerged for at least 10 minutes. Do not let "sharps" (scissors, knives, osteotomes, etc.) touch each other. Ensure that dissimilar metal instruments are separated. Rinse instruments under running water to remove solutions and change solutions frequently.
B. Ultrasonic Cleaning: Most instrument manufacturers recommend ultrasonic cleaning as the most effective way to clean surgical instruments, particularly instruments with hinges, box locks and
other moving parts.
· All instruments must be fully submerged in an open position using distilled (demineralized) water, if possible. To prevent possible surface scratching make sure that "sharps" do not touch other instruments. Also, separate instruments of dissimilar metals.
· Process instruments for the full recommended ultrasonic cleaning cycle. Change solution frequently or as often as the manufacturer recommends.
· Rinse instruments with water to remove the cleaning solution. Miltex® EZ-Zyme® (3-750 and 3-755) or Miltex® Surgical Instrument Cleaner (3-720, 3-725 and 3-726) can be safely used with all ultrasonic units.

C. Automatic Washer Sterilizers: Following manufacturers' recommendations, ensure that instruments are lubricated before the sterilization cycle and after the last rinse cycle.
CAUTION: Needle holders and forceps may crack if sterilized with ratchet in closed position.
D. Manual Cleaning: If ultrasonic cleaning is not available, observe the following steps:
·Use stiff nylon cleaning brushes (3-1000). Do not use steel wool or wire brushes except stainless steel wire brushes (3-1001) specially recommended for instrument serrated areas, bone files, burs or on stained areas of knurled handles.
·Use only neutral pH (7) detergents such as Miltex® Surgical Instrument Cleaner (3-720, 3-725 and 3-726). If not rinsed off properly, low pH (acidic - less than 6 pH) detergents break down the stainless protective surface resulting in pitting and/or black staining on instruments. High pH detergents (alkaline - more than 8 pH) can cause brown stains (phosphate surface deposit) which can also interfere with the smooth operation of instruments. Most brown stains are not rust and are easily removed with Miltex® Surgical Instrument Stain Remover (3-740).
· Brush delicate instruments carefully, and if possible, separate them from general instruments.
· Make sure instrument surfaces are visibly clean and are free from stains and tissue. Miltex® Surgical Instrument Stain Remover (3-740) can help remove residue stains.This is also a good time to inspect each instrument for proper function and condition.
· Check scissors' blades to ensure proper function. Blades should open and close smoothly. Test cutting performance at 3/4 length of the blade with the materials recommended below. Scissors should cut all the way to the tips. Recommended cutting test materials:
­ Fine/Delicate scissors: Surgical glove ­ Medium scissors: Single layer of stocking/cast netting ­Large/Utility scissors: Double layer of stocking/cast
netting
· Check forceps (pickups) for proper jaw alignment.Teeth must meet properly without catching.
· Check hemostats and needle holders to ensure jaw tips close in first ratchet position and that the entire jaw closes in third ratchet position. Check instruments for loose hinges and verify that they lock and unlock easily.
Also check instruments for wear on jaw surfaces.
· Suction tubes should be clean inside.
· Test Biopsy Punches by punching a clean hole in 3-6 mil thick poly-bag material. If poly-bag material is not available, use tissue paper.
· Retractors should function properly.

46

www.miltex.com

Care & Cleaning process

Recommended Steps in Cleaning, Sterilization, & Maintenance of Surgical Instruments, continued

· Cutting edge instruments and knives should be sharp and free of damage.
· After scrubbing, rinse instruments thoroughly under running water. While rinsing, open and close scissors, hemostats, needle holders and other hinged instruments to ensure that hinged areas are rinsed out and that no debris remains.
4. After Cleaning Separate dissimilar metals prior to sterilizing/autoclaving. If instruments will be stored, allow them to air-dry and store them in a clean and dry environment.
5. AUTOCLAVING
A. Lubricate all hinged instruments which have any "metal to metal" action at the screw or box lock. A non-silicone, water-soluble surgical lubricant such as Miltex® Lube (3-700 or 3-705) is recommended. Do not use industrial oils or lubricants.
B. Sterilize instruments either individually or in sets.
· Individual Instruments: Disposable paper or plastic pouches are ideal. Make sure to use a wide enough pouch for instruments with ratchet locks so instruments can be sterilized in an open (unlocked) position. Instruments locked during autoclaving can develop cracked hinges (box locks) or other problems because of heat expansion. If wrapping instruments, make sure the towel does not contain detergent residue which can stain instruments.
· Instrument Sets: Unlock all instruments and sterilize in an open position. Place heavy instruments on the bottom of set (when two layers are required). Do not overload the chamber because an air pocket that hinders steam penetration may form.
CAUTION: With most portable tabletop autoclaves, unlock the door and open it no more than a crack, about 1/4" (6.4 mm). (at the end of the autoclave cycle and before the drying cycle) Then run the dry cycle for the period recommended by the autoclave manufacturer. If the autoclave door is fully opened before the drying cycle, cold air will rush into the chamber and will cause condensation on the instruments, potentially resulting in water stains or causing wet packs. Make sure autoclave filters and chambers are cleaned as recommended by the manufacturer. Miltex® Surgical Instrument Stain Remover (3-740) is effective in removing stains and in cleaning the autoclave chamber. If you have any unusual staining on your instruments after sterilization, obtain our Instrument Care System DVD (3-810) or contact your local Miltex® representative.

6. chemical/COLD STERILIZATION Most chemical/cold sterilization solutions render instruments sterile only after 10-hour immersion. This prolonged chemical action can be more detrimental to instruments than the usual 20-minute autoclave cycle. If the instruments need to be "disinfected" only, a chemical/cold sterilization soak is acceptable, as disinfection will take approximately 10 minutes or more. Check manufacturers' specifications. Also see our warning in using bleach (paragraph 3).
Keep in mind the difference between:
· Sterile - an absolute term (no living organism survives); and
· Disinfected - basically clean. Some organisms may survive. Always use the proper sterilization/cleaning technique to render the instrument in the required condition for use.
CAUTION: For instruments with tungsten carbide insert jaws, the use of chemical/cold sterilization solutions is not recommended as it may deteriorate the instrument's jaw.
We recommend these Miltex products to properly safeguard and care for your quality instruments.

REF 3-760 3-750
3-755 3-700 3-705

Description
Instrument Prep Enzyme Foam 24 oz. spray EZ-Zyme®, All Purpose Enzyme Cleaner Box 32 - 3/4 oz. packets
EZ-Zyme®, All Purpose Enzyme Cleaner 1-gallon pump bottle
Spray Lube 8 oz. spray bottle
Surgical Instrument Lubricant 1-gallon pump bottle

3-710

Surgical Instrument Cleaner & Lubricant 1-gallon pump bottle

3-720 3-725 3-726 3-740 3-1000 3-1001 3-800

Surgical Instrument Cleaner 8 oz. spray bottle
Surgical Instrument Cleaner 1-gallon pump bottle
Surgical Instrument Cleaner Box 80-1/4oz. packets
Surgical Instrument Stain Remover 3 oz. jar
Nylon Instrument Cleaning Brushes 3-pack
Stainless Steel Instrument Cleaning Brushes 3-pack
Instrument Care System

3-810 Instrument Care DVD

Use During · Holding & presoak · Holding & presoak · Soak cleaning · Ultrasonic cleaning · Manual cleaning · Laundry presoak
· Before autoclaving
· Manual cleaning · Washer/decontaminator · Ultrasonic cleaning
· Soak cleaning · Ultrasonic cleaning · Manual cleaning
· Stain removal
· Manual cleaning of instruments
· Complete instrument care · Training personnel in the care of instruments

www.miltex.com

47

warranty

INSTRUMENT WARRANTY

Miltex® and Padgett® Instruments are guaranteed to be free from material defects. Our Guarantee also includes a commitment to the very highest standards of quality craftsmanship which will be employed in the manufacture of each and every Instrument. If either of these high standards are not met by Miltex, our customer may return the Instrument to be repaired or replaced at our discretion and at no charge to the customer.

PRODUCT WARRANTY Miltex also offers to our customers an array of complementary surgical and dental products. These are held to the same high standards of material and workmanship as our instruments. However, all of these quality products are also provided with a limited one-year warranty.

· Chiropractic and Auto-Surgical Mallets · Laparoscopic Instruments and Scopes · Instrument Containers and Cassettes · Chrome Instruments

· Electrosurgical Instrumentation · Electrical Devices · Podiatry Nipper/Splitter Springs · Fiber Optic Instruments / Accessories

REPAIR WARRANTY If for any reason a customer is dissatisfied with a Miltex® repair, we guarantee to replace or again repair the product at no charge if the instrument is returned within 30 days. We request that our customers assist us in protecting our employees by returning cleaned and sterilized instruments for repair.

WARRANTY STIPULATIONS OurWarranty is effective from the date-of-purchase only from either Miltex or an Authorized Miltex Distributor. The warranty remains in effect if the Instrument or Product is used for its intended surgical or dental purpose as well as continuous and proper care of the Instrument or Product is maintained.

OTHER WARRANTY INFORMATION FOR OUR CUSTOMERS ·We ask our customers to use only the Miltex® Repair Services for our products so the warranty remains in effect. ·We love to meet your unique or special needs with custom produced products. However, these are not returnable. · Miltex offers excellent Care and Cleaning products for our instruments. Please use these products or other appropriate cleaning
products to properly maintain your instrument as a valuable asset. Proper care and cleaning of your instruments is also a requirement to maintain the instrument warranty.
·We strongly recommend that you use the appropriate instrument for the identified clinical need. Misuse of instruments can cause damage to the instrument or product and will void the warranty.
· Hurricanes, fires or other disasters will void the warranty of your instruments.

A FINAL & REQUISITE STATEMENT As set forth in theseTerms, Conditions, Policy and Warranty, Miltex makes no other representations, either expressed or implied, which supersede the above descriptions. In no event will Miltex be liable for any incidental, special or exemplary damages or loss of profits in connection with the use of a Miltex® Instrument or Product.

48

www.miltex.com

terms & conditions
TERMS & CONDITIONS
ORDERS AND QUOTATIONS Contact Miltex, Inc., 589 Davies Drive,York, PA 17402 or call toll free 1-866-854-8300 to place orders and for formal quotations. Orders may also be placed via toll-free fax 1-866-854-8400, on our web site at www.miltex.com (registered authorized distributors only) or through Electronic Data Interchange (EDI).
TERMS All invoices are payable net 30 days from date of invoice.
FREIGHT Prices quoted are FOB factory. Prices are subject to change without notice. Orders will be shipped via the carrier of Miltex's choice unless the distributor requests a particular service. If a special request is made, an additional handling charge will be included on the invoice to cover the resulting processing and carrier charges.
ACCEPTANCE All orders are subject to approval by Miltex. Miltex herewith reserves the right to alter the design or form of any product or to discontinue any product prior to the date of delivery without incurring any obligation to make such changes in any items previously purchased, whether or not delivered.
CREDIT Miltex reserves the right to refuse orders, suspend credit and cancel unfulfilled orders when credit conditions of a customer warrant such action.
SHIPMENTS, DAMAGES, & SHORTAGES IN TRANSIT Shipment schedules are approximate and are as accurate as conditions permit on the date the schedules are provided. Miltex assumes no responsibility or liability for unforeseen delays in making delivery. When signing for receipt of goods, all visible damage and/or shortages to cartons must be indicated on the carrier delivery receipt so that a claim may be filed with the carrier. The customer shall inspect all items upon arrival and give written notice to Miltex of any claim for a shortage or non-conformance within 7 days after receipt of shipment. Miltex may make partial shipments, which the distributor shall accept and pay for at the prices specified on maturity of the invoice involved.
RETURN MATERIALS POLICY A Returned Materials Authorization number (RMA) must be obtained prior to returning product to Miltex. Product returned without an RMA number will be returned directly to the distributor, at our cost, with a letter of explanation. Returns can only be granted and authorized by obtaining an RMA number from Miltex customer service at toll free 1-866-854-8300. Issue of an RMA number should not be interpreted as a final credit to your customer account. Miltex reserves the right to evaluate incoming returns prior to issuing any customer credit. There will be a 15% restocking charge for product returned after 60 days but before 120 days after receipt of shipment. Product must be returned unused in its original packaging. No returns will be accepted after 120 days after receipt of shipment. Non-returnable products received by Miltex will be returned directly to the distributor, at our cost, with a letter of explanation. Sterile products which have been opened, returned out of the original package or returned after the sterile expiration date are not returnable. Discontinued products, medicament products, private labeled, custom made, custom etched or neutralized products are not returnable. Broken instruments noted as `Sharps' have special handling and return requirements. Call customer service toll free 1-866-854-8300 for information regarding special shipping and handling requirements.

www.miltex.com

49

service & repair / return instructions
instrument service, repair and Return instructions
Miltex, Inc., offers you the expertise and convenience of operating its own in-house Service and Repair Department. Please follow our simple return instructions to ensure all returns and repairs are processed correctly and in a timely manner. Your instruments are as important to us as they are to you.
Please contact our Customer Service Department at 1.866.854.8300 or [email protected] to obtain a Return Material Authorization (RMA) number. The RMA number is required before instruments are returned for repair.
Be prepared to provide the following information: · Customer account number · Customer purchase order number
IMPORTANT: Any instrument sent to Miltex, Inc., without an RMA number will be returned to sender without being evaluated or repaired.
Once you have received your RMA number, repairs should be sent to:
Miltex, Inc. Repair Department 589 Davies Drive York, PA 17402 USA RMA #: _______ (needed on outside of shipping box)
How to Package and Ship Instruments: · Miltex, Inc., cannot accept instruments that have not been properly cleaned and sterilized. · Include the RMA number, customer account number, customer purchase order number and reason for repair. · Include all contact information (name, address, phone number, email address). · Wrap instruments to protect them during transit. · Use a common carrier (FedEx, UPS). · Insure the package, and keep a record of the tracking number.
NOTE: We cannot accept instruments for repair at conventions or trade shows. Miltex, Inc., representatives cannot accept instruments for repair. Please follow the instructions above.
If you have questions or comments, contact Customer Service at 1.866.854.8300 or [email protected].

50

www.miltex.com

notes

www.miltex.com

51

notes

52

www.miltex.com

integralife.com/integra-miltex toll-free phone 866-854-8300 toll-free fax 866-854-8400 phone 717-840-9335 fax 717-840-9347
Please call Customer Service today for additional information, an in-office demonstration, to place an order or to receive other Miltex catalogs.
Illustrations and content provide general description only and may be subject to change.

Miltex, Miltex Redefining Excellence, MeisterHand and EZ-Zyme are registered trademarks of Integra York PA, Inc., a subsidiary of Integra LifeSciences Corporation. Silitone,Tape N'Tell,Tip-It,Tuck-Away, BiopBlade and Wing-Grip are trademarks of Integra York PA, Inc., a subsidiary of Integra LifeSciences Corporation. Integra and the Integra logo are trademarks of Integra LifeSciences Corporation. Copyright © 2011 Integra LifeSciences Corporation

0111/1,250/C/4

CAT-POD

MPM0528


Adobe InDesign CS4 (6.0.5) Adobe PDF Library 9.0

Search Any Device: