Contents/目录
Not Your Device? Search For Manuals or Datasheets below:
File Info : application/pdf, 8 Pages, 241.31KB
Document DEVICE REPORT0000000103SHENZHEN HUNTKEY ELECTRIC CO., LTD Contents/ 1. SCOPE/ ........................................................................................................................................ 3 2. Input Characteristics/............................................................................................................ 3 3. Output Characteristics/ ......................................................................................................... 3 4. Protection Requirements/ ..................................................................................................... 5 5. Environment Requirements/................................................................................................. 5 6. Reliability Requirements/................................................................................................. 6 7. EMI/EMS .................................................................................................................................... 7 8. Safety Standards/.................................................................................................................. 7 9. Net Weight/ .............................................................................................................................. 8 10. Mach. Outline Drawing/......................................................................................................... 9 11. Label Drawing/..................................................................................................................... 10 12. DC CABEL/DC ....................................................................................................................... 11 13. Package Drawing/......................................................................................................... 12 1. Page 2 SHENZHEN HUNTKEY ELECTRIC CO., LTD SCOPE/ 1.1. The document details the electrical, mechanical and environmental specifications of a SMPS, the power supply provides 11W continuous output power. 11 W(),. The power supply shall meet the RoHS requirements. RoHS . Description/ SMPS Adapter(Wall mount)/ SMPS Adapter(Desk-top)/ Open Frame/ SMPS Unit (With Case)/ Others/ 2. Input Characteristics/ 2.1. Input Voltage & Frequency/ The range of input voltage is from 90Vac to 264Vac with a single phase. 90Vac 264Vac, . Minimum/ Rating/ Maximum/ Input Voltage/ 90Vac 100Vac~240Vac 264Vac Input Frequency/ 47Hz 2.2. Input AC Current/ 60Hz/50Hz 63Hz 0.5Amax. @ 100Vac input & Full load./ 100Vac 0.5A 2.3. Inrush Current (cold start)/() 50Amax. @ 264Vac input./ 264Vac 50A 2.4. Average Efficiency / While input 115Vac and 230Vac, the average efficiency is more than 80.00%.The test point is at 25%,50%,75% and 100% of max load respectively. The efficiency is more than 70.1% at 10% of max load. (Working 30 minutes before test, test at USB port). 115Vac 230Vac 80.00% 25%,50%,75% 100% 10% 70.1% 30 USB 2.5. No-Load Input Power Dissipation/ While input 115Vac ~ 264Vac and the output (5V)is no load, the input power loss must be less than 0.075W. 115Vac~264Vac5V 0.075W 2.6. Flow Backward Electric Current Tests/ When cut down AC power, input 0--5V DC power into charger, the current should less than 5mA. 0--5VDC , 5mA 3. Output Characteristics/ 3.1. Static Output Characteristics <Vo & R+N>/<&+> Output Rated Load/ Peak Output Range R+N Remark Page 3 SHENZHEN HUNTKEY ELECTRIC CO., LTD Rating Min. Load Max. Load Load +5.0V 0A 2.0A / 5.0V ~ 5.5V 200mVp-p USB 1. Load range CVUnder the input Voltage 100 Vac~240Vac. CV 100Vac~240Vac 2. Under the input Voltage 100 Vac~240Vac. 100Vac~240Vac 3. Ripple & Noise:Tested by an oscilloscope using 20MHz bandwidth and the output is paralleled a 0.1uF ceramic capacitor and a 10uF electrolysis capacitor. (Under the input Voltage 100~240Vac). : 20MHz , 0.1uF 10uF .( 100~240Vac) 3.2. Charger Output Voltage/Current Characteristics// V-I 5V CV 2.7~3.5V 4.9 0 5 0 4.9 2.0 5 2.1 3.5 2.0 3 2.1 3.5 0 0 0 0 0 0 0 0 0 5V 5.5 0 5.5 2.4 2.7 2.4 0 2.4 0 2.4 0 0 3.3. Turn - on Delay Time/ 3S max. @ 90Vac input & Full load./ 90Vac 3S 3.4. Hold-up Time/ 5mS min. @ Full load &115Vac/60Hz ,230Vac/50Hz input turn off at worst case. 115Vac/60Hz230Vac/50Hz , 5mS Page 4 SHENZHEN HUNTKEY ELECTRIC CO., LTD 3.5. Rise Time/ 50mS max. @ Full loadThere must be a smooth and continuous ramp of DC voltage. 50mS 3.6. Fall Time/ 20mS max. @ Full load./ 20mS 3.7. Output Overshoot / Undershoot// 10% max. When the power on or off.// 10% 3.8. Output Load Transient Response/ Output voltage is within 4.5-5.8V while the load step is from 10% to 90% ,0%to 50%of max load, R/S: 0.25A/uS,Periods 1mS. 4.5-5.8V : 10% 90%,0% 50%: 0.25A/uS, 1mS 3.9. Capacitance Load/ While input 115Vac and Capacitance load is 1000uF, the power supply can turn on normally and the output is in the rated range. 115Vac1000uF 4. Protection Requirements/ 4.1. Over Current Protection/ OCP Point Limited: 2.1A~2.5A/: 2.1A~2.5A The power supply must shut-down in an over current condition and automatically return to normal operating condition once the fault condition has been removed. ,,, 4.2. Short Circuit Protection/ The power supply must shut-down in the event of a short circuit and automatically return to normal operating condition once the fault condition has been removed. ,,, 4.3. Over Voltage Protection/ OVP point limit:<150% <150%. When the output voltage is over, the output voltage is less than 150% of the rated output voltage. , 1.5 5. Environment Requirements/ 5.1. Operating Temperature and Relative Humidity/ -10 to +45 5%RH to 95%RHSea level shall below 5,000 meter/ 5000 5.2. Storage Temperature and Relative Humidity/ -40 to +70 5%RH to 95%RH non-condensing @ Sea level shall below 9,000 meter. Page 5 SHENZHEN HUNTKEY ELECTRIC CO., LTD 9,000 -40+70, 5%RH to 95%RH 6. Reliability Requirements/ 6.1. Life time/ The lifetime shall be at least 21900 hours at 25, 80% full load and 115Vac/230Vac input condition. 21900 25115Vac/230Vac 80% 6.2. MTBF Qualification/ The MTBF shall be at least 100,000 hours at 25, Full load and normal input condition. 100,000 25 6.3. Environmental reliability/ 6.3.1. High and low temperature storage / The power supply with non-operated stored in -40/70 for 24 hours, , no abnormality in electric and mechanical characteristic after 2 hours recovery at the room temperature. -40--70 24 2 6.3.2. High and low temperature operating / Ambient temperature: -10--45, input voltage: 90Vac/264Vac & full load, in two input voltage for each work 12hours; No abnormality in electric and mechanical characteristic after 2 hours recovery at the room temperature. -10--45 90Vac 264Vac 12 2 6.4. Mechanical reliability/ 6.4.1. Working vibration test/ 5 to 500Hz sweep at a shift gears for 20 minute for each of the perpendicular axes X, Y, Z there into :acceleration frequency for 10 m2/s3 at 5~10HZ; acceleration frequency for 3m2/s3 at 10~200HZ; acceleration frequency for 1 m2/s3 at 200~500HZ. : 5 to 500Hz , X, Y, Z 20 ,: 5~10HZ 10 m2/s3 10~200HZ 3 m2/s3200~500HZ 1 m2/s3 6.4.2. Working impact test/ 3 Edges thrice, half sine wave, acceleration 30G, pulse breadth for 11 mS. 30G 11mSXYZ 3 6.4.3. Charger room temperature controlled drop test/ 6 Surfaces each once, Height: 100cm, on the cement floor. 6 , : 100 , 6.4.4. Label/Nameplate durability test// Dips in water cotton cloth to wipe 15S, then dip gasoline cotton cloth to wipe 15S. 15S 15S Page 6 SHENZHEN HUNTKEY ELECTRIC CO., LTD 7. EMI/EMS 7.1. EMI Standards/EMI EN 55022 EN 61000-3-2 EN 61000-3-3 CISPR 22 AS/NZS CISPR 22 7.2.EMS Standards/EMS IEC 61000-3-2 Harmonic current emissions IEC 61000-3-3 Voltage fluctuations & flicker IEC61340-5-1 Electrostatic Discharge(ESD): 15kV air discharge,8kV contact discharge IEC 61000-4-3 Radio-Frequency Electromagnetic Field Susceptibility Test-RS IEC 61000-4-4 Electrical Fast Transient/Burst-EFT±1kV IEC 61000-4-5 Surge Immunity Test: Differential mode 1kV, Common mode 2kV IEC 61000-4-6 Conducted Radio Frequency Disturbances Test-CS IEC 61000-4-8 Power Frequency Magnetic Field Test IEC 61000-4-11 Voltage Dips 8. Safety Standards/ 8.1. Dielectric Strength(Hi-pot)/() Primary to Secondary: 3000Vac / 3.5mA / 60second Or 4242Vdc / 3.5mA / 60second. : 3000Vac / 3.5mA / 60 4242Vdc / 3.5mA / 60 8.2. Leakage Current/ 20uA max. at 264Vac / 50Hz input./ 264Vac/50Hz 20uA 8.3. Insulation Resistance/ 100M min. @ primary to secondary add a 500Vdc test voltage. 500Vdc , 100M 10M min. @ primary to case add a 500Vdc test voltage. 500Vdc , 10M 8.4. Regulatory Standards/ Type UL/CUL TUV CCC CE BSMI IRAM Country Standard USA UL60950-1 Europe EN60950-1 China GB4943 Europe EN60950-1 Taiwan .China CNS 14336-1 Argentina IEC60950-1 Type PSB PSE NOM GOST C-Tick KC Country Standard Singapore IEC60950-1 Japan J60950-1 Mexico NOM-001 Russia IEC 60950-1 Australia AS/NZS 3548 Korea K60950-1 Page 7 FCC SIRIM America Malaysia RCM Australia 9. Net Weight/ 40g/1PCS SHENZHEN HUNTKEY ELECTRIC CO., LTD FCC Part15 IEC60950-1 AS/NZS IEC60950-1 SAA DOC CQC Australia Ukraine China AS/NZS 60950 IEC61000 GB4943 Page 8 SHENZHEN HUNTKEY ELECTRIC CO., LTD 10. Mach. Outline Drawing/ Page 9