cq

eu.aoc.com/api/frontberg/downloadable/1783e7c5-43a7-4af...

Setup View

bedienungsanleitung stand 24 01 2017

PDF Viewing Options

Not Your Device? Search For Manuals or Datasheets below:


File Info : application/pdf, 60 Pages, 2.45MB

Document DEVICE REPORTc420b419054377be824ca27e7d94aa115408
Safety ........................................................................................................................................................................ 3 National Conventions.........................................................................................................................................3 Power ................................................................................................................................................................4 Installation.......................................................................................................................................................... 5 Cleaning............................................................................................................................................................. 6 Other .................................................................................................................................................................. 7
Setup ........................................................................................................................................................................8 Contents in Box .................................................................................................................................................8 Setup Stand & Base ..........................................................................................................................................8 Adjusting Viewing Angle...................................................................................................................................10 Connecting the Monitor....................................................................................................................................12 Wall Mounting .................................................................................................................................................. 13
Adjusting ................................................................................................................................................................. 14 Setting Optimal Resolution .............................................................................................................................. 14 Windows Vista ..........................................................................................................................................14 Windows XP .............................................................................................................................................16 Windows ME/2000....................................................................................................................................17 Hotkeys ............................................................................................................................................................ 18 OSD Setting.....................................................................................................................................................19 Luminance ................................................................................................................................................ 20 Image Setup ............................................................................................................................................. 22 Color Setup...............................................................................................................................................24 Picture Boost ............................................................................................................................................ 26 OSD Setup ............................................................................................................................................... 28 Extra ......................................................................................................................................................... 30 Exit............................................................................................................................................................ 32 LED Indicator ................................................................................................................................................... 33
Driver ...................................................................................................................................................................... 34 Monitor Driver .................................................................................................................................................. 34 Windows 7 ................................................................................................................................................34 Windows Vista ..........................................................................................................................................38 Windows XP .............................................................................................................................................40 Windows 2000 ..........................................................................................................................................43 Windows ME.............................................................................................................................................43 i-Menu .............................................................................................................................................................. 44 e-Saver ............................................................................................................................................................ 45 Screen+ ........................................................................................................................................................... 46
Troubleshoot ........................................................................................................................................................... 47 Specification............................................................................................................................................................ 48
General Specification.......................................................................................................................................48 Preset Display Modes ...................................................................................................................................... 50 Pin Assignments .............................................................................................................................................. 51 Plug and Play...................................................................................................................................................52 Regulation............................................................................................................................................................... 53 FCC Notice ...................................................................................................................................................... 53 WEEE Declaration ...........................................................................................................................................54 EPEAT Declaration .......................................................................................................................................... 55 Service .................................................................................................................................................................... 56 Warranty Statement for Europe ....................................................................................................................... 56
Warranty Statement for North & South America (excluding Brazil) ........................................................... 58 TCO DOCUMENT ........................................................................................................................................... 60
2

Safety
National Conventions
The following subsections describe notational conventions used in this document. Notes, Cautions, and Warnings Throughout this guide, blocks of text may be accompanied by an icon and printed in bold type or in italic type. These blocks are notes, cautions, and warnings, and they are used as follows: NOTE: A NOTE indicates important information that helps you make better use of your computer system. CAUTION: A CAUTION indicates either potential damage to hardware or loss of data and tells you how to avoid the problem. WARNING: A WARNING indicates the potential for bodily harm and tells you how to avoid the problem. Some warnings may appear in alternate formats and may be unaccompanied by an icon. In such cases, the specific presentation of the warning is mandated by regulatory authority.
3

Power
The monitor should be operated only from the type of power source indicated on the label. If you are not sure of the type of power supplied to your home, consult your dealer or local power company.
The monitor is equipped with a three-pronged grounded plug, a plug with a third (grounding) pin. This plug will fit only into a grounded power outlet as a safety feature. If your outlet does not accommodate the three-wire plug, have an electrician install the correct outlet, or use an adapter to ground the appliance safely. Do not defeat the safety purpose of the grounded plug.
Unplug the unit during a lightning storm or when it will not be used for long periods of time. This will protect the monitor from damage due to power surges.
Do not overload power strips and extension cords. Overloading can result in fire or electric shock. To ensure satisfactory operation, use the monitor only with UL listed computers which have appropriate configured receptacles marked between 100 - 240V ~, Min. 5A The wall socket shall be installed near the equipment and shall be easily accessible. For use only with the attached power adapter (Output 12Vdc) which have UL,CSA listed license (Only for monitors with power adapter).
4

Installation
Do not place the monitor on an unstable cart, stand, tripod, bracket, or table. If the monitor falls, it can injure a person and cause serious damage to this product. Use only a cart, stand, tripod, bracket, or table recommended by the manufacturer or sold with this product. Follow the manufacturers instructions when installing the product and use mounting accessories recommended by the manufacturer. A product and cart combination should be moved with care.
Never push any object into the slot on the monitor cabinet. It could damage circuit parts causing a fire or electric shock. Never spill liquids on the monitor.
Do not place the front of the product on the floor. If you mount the monitor on a wall or shelf, use a mounting kit approved by the manufacturer and follow the kit instructions. Leave some space around the monitor as shown below. Otherwise, air-circulation may be inadequate hence overheating may cause a fire or damage to the monitor. See below the recommended ventilation areas around the monitor when the monitor is installed on the wall or on the stand:
5

Cleaning
Clean the cabinet regularly with cloth. You can use soft-detergent to wipe out the stain, instead of strong-detergent which will cauterize the product cabinet.
When cleaning, make sure no detergent is leaked into the product. The cleaning cloth should not be too rough as it will scratch the screen surface.
Please disconnect the power cord before cleaning the product.
6

Other
If the product is emitting a strange smell, sound or smoke, disconnect the power plug IMMEDIATELY and contact a Service Center.
Make sure that the ventilating openings are not blocked by a table or curtain. Do not engage the LCD monitor in severe vibration or high impact conditions during operation. Do not knock or drop the monitor during operation or transportation.
7

Setup
Contents in Box

Monitor

CD Manual

Monitor Base

Stand

Wire holder

Power Cable

DVI Cable

Analog Cable

Audio Cable

Not all signal cables (Audio, Analog and DVI cables) will be provided for all countries and regions. Please check with the local dealer or AOC branch office for confirmation.

8

Setup Stand & Base
Please setup or remove the base following the steps as below. Setup: Remove:
9

Setup: Remove:
10

Adjusting Viewing Angle
For optimal viewing it is recommended to look at the full face of the monitor, then adjust the monitor's angle to your own preference. Hold the stand so you will not topple the monitor when you change the monitor's angle. 1> You are able to adjust the monitor's angle from -5°to 20 °.
2> You are able to adjust the monitor's angle from -5°to 22 °.
NOTE: Do not touch the LCD screen when you change the angle. It may cause damage or break the LCD screen.
11

Connecting the Monitor
Cable Connections In Back of Monitor and Computer:
1. Power 2. DVI cable 3. D-Sub cable 4. Audio Cable To protect equipment, always turn off the PC and LCD monitor before connecting. 1 Connect the power cable to the AC port on the back of the monitor. 2 Connect one end of the 15-pin DVI /D-Sub cable to the back of the monitor and connect the other end to the
computer's DVI /D-Sub port. 3 Turn on your monitor and computer. If your monitor displays an image, installation is complete. If it does not display an image, please refer Troubleshooting.
12

Wall Mounting
Preparing to Install An Optional Wall Mounting Arm.
This monitor can be attached to a wall mounting arm you purchase separately. Disconnect power before this procedure. Follow these steps: 1 Remove the base. 2 Follow the manufacturer's instructions to assemble the wall mounting arm. 3 Place the wall mounting arm onto the back of the monitor. Line up the holes of the arm with the holes in the
back of the monitor. 4 Insert the 4 screws into the holes and tighten. 5 Reconnect the cables. Refer to the user's manual that came with the optional wall mounting arm for
instructions on attaching it to the wall. Noted : VESA mounting screw holes are not available for all models, please check with the dealer or official department of AOC.
13

Adjusting
Setting Optimal Resolution
Windows Vista
For Windows Vista: 1 Click START. 2 Click CONTROL PANEL.
3 Click Appearance and Personalization.
4 Click Personalization
14

5 Click Display Settings. 6 Set the resolution SLIDE-BAR to 1920 by 1080.
15

Windows XP
For Windows XP: 1 Click START.
2 Click SETTINGS. 3 Click CONTROL PANEL. 4 Click Appearance and Themes.
5 Double click DISPLAY.
16

6 Click SETTINGS. 7 Set the resolution SLIDE-BAR to 1920 by 1080.
Windows ME/2000
For Windows ME/2000: 1 Click START. 2 Click SETTINGS. 3 Click CONTROL PANEL. 4 Double click DISPLAY. 5 Click SETTINGS. 6 Set the resolution SLIDE-BAR to 1920 by 1080.
17

Hotkeys
1 Source / Auto / Exit 2 Eco (DCR ) / < 3 Volume / > 4 Menu / Enter 5 Power
Power Press the Power button to turn on/off the monitor.
Menu/Enter Press to display the OSD or confirm the selection. > Volume When there is no OSD,Press Volume button to active volume adjustment bar,Press < or > to adjust volume(Only for the models with speakers) < Eco (DCR) Press the Eco key continuously to select the Eco mode of brightness and DCR on when there is no OSD. ( Eco mode hot key may not be available in all models).
Source/Auto/Exit When the OSD is closed, press Source/Auto/Exit button will be auto configure hot key function. When the OSD is closed, press Source/Auto/Exit button continuously about 3 second to do auto configure (Only for the models with dual or more inputs).
18

OSD Setting
Basic and simple instruction on the control keys.

1) Press the

MENU-button to activate the OSD window.

2) Press < or > to navigate through the functions. Once the desired function is highlighted, press the

MENU-button to activate it . press < or > to navigate through the sub-menu functions. Once the desired

function is highlighted, press

MENU-button to activate it.

3) Press < or > to change the settings of the selected function. Press

AUTO to exit. If you want to adjust

any other function, repeat steps 2-3.

4) OSD Lock Function: To lock the OSD, press and hold the

MENU button while the monitor is off and then

press

power button to turn the monitor on. To un-lock the OSD - press and hold the

MENU button

while the monitor is off and then press

power button to turn the monitor on.

Notes: 1) If the product has only one signal input, the item of "Input Select" is disable to adjust. 2) If the product screen size is 4:3 or input signal resolution is wide format, the item of "Image Ratio" is disable to
adjust. 3) One of DCR, Color Boost, and Picture Boost functions is active, the other two function is turned off
accordingly.

19

Luminance

1. Press

(Menu) to display menu.

2. Press < or > to select

(Luminance), and press

to enter.

3. Press < or > to select submenu, and press

to enter.

20

4. Press < or > to adjust.

5. Press

to exit.

Brightness Contrast
Eco mode
Gamma DCR

0-100 0-100 Standard
Text
Internet
Game
Movie
Sports Gamma1 Gamma2 Gamma3 Off On

Backlight Adjustment Contrast from Digital-register. Standard Mode
Text Mode
Internet Mode
Game Mode
Movie Mode
Sports Mode Adjust to Gamma1 Adjust to Gamma 2 Adjust to Gamma 3 Disable dynamic contrast ratio Enable dynamic contrast ratio

21

Image Setup

1. Press

(Menu) to display menu.

2. Press < or > to select

(Image Setup), and press

to enter.

3. Press < or > to select submenu, and press

to enter.

22

4. Press < or > to adjust.

5. Press

to exit.

Clock Phase Sharpness H.Position V.Position

0-100 0-100 0-100 0-100 0-100

Adjust picture Clock to reduce Vertical-Line noise. Adjust Picture Phase to reduce Horizontal-Line noise Adjust picture sharpness Adjust the horizontal position of the picture. Adjust the vertical position of the picture.

23

Color Setup

1. Press

(Menu) to display menu.

2. Press < or > to select

(Color Setup), and press

to enter.

3. Press < or > to select submenu, and press

to enter.

24

4. Press < or > to adjust.

5. Press

to exit.

Color setup.
DCB Mode DCB Demo

Warm Normal Cool sRGB
User
Full Enhance Nature Skin Green Field Sky-blue AutoDetect

Red Green Blue on or off on or off on or off on or off on or off On or off

Recall Warm Color Temperature from EEPROM. Recall Normal Color Temperature from EEPROM. Recall Cool Color Temperature from EEPROM. Recall SRGB Color Temperature from EEPROM. Red Gain from Digital-register Green Gain Digital-register. Blue Gain from Digital-register Disable or Enable Full Enhance Mode Disable or Enable Nature Skin Mode Disable or Enable Green Field Mode Disable or Enable Sky-blue Mode Disable or Enable AutoDetect Mode Disable or Enable Demo

25

Picture Boost

1. Press

(Menu) to display menu.

2. Press < or > to select

(Picture Boost), and press

to enter.

3. Press < or > to select submenu, and press

to enter.

26

4. Press < or > to adjust.

5. Press

to exit.

Frame Size Brightness Contrast H. position V.position Bright Frame

14-100 0-100 0-100 0-100 0-100 on or off

Adjust Frame Size Adjust Frame Brightness Adjust Frame Contrast Adjust Frame horizontal Position Adjust Frame vertical Position Disable or Enable Bright Frame

27

OSD Setup

1. Press

(Menu) to display menu.

2. Press < or > to select

(OSD Setup), and press

to enter.

3. Press < or > to select submenu, and press

to enter.

28

4. Press < or > to adjust.

5. Press

to exit.

H.Position V.Position Timeout Transparence Language

0-100 0-100 5-120 0-100

Adjust the horizontal position of OSD Adjust the vertical position of OSD Adjust the OSD Timeout Adjust the transparence of OSD Select the OSD language

29

Extra

1. Press

(Menu) to display menu.

2. Press < or > to select

(Extra), and press

to enter.

3. Press < or > to select submenu, and press

to enter.

30

4. Press < or > to adjust.

5. Press

to exit.

Input Select Auto Config Off timer Image Ratio DDC-CI Reset Information

Analog / DVI Select Input Signal Source

yes or no

Auto adjust the picture to default

0-24hrs

Select DC off time

wide or 4:3 Select wide or 4:3 format for display

yes or no

Turn ON/OFF DDC-CI Support

Yes or no

Reset the menu to default

Show the information of the main image and sub-image source

31

Exit

1. Press

(Menu) to display menu.

2. Press < or > to select

(Exit), and press

to enter.

3. Press

to exit.

Exit

Exit the main OSD

32

LED Indicator
Status Full Power Mode Active-off Mode

LED Color Green or Blue Orange or red

33

Driver
Monitor Driver
Windows 7
1.Start Windows® 7 2.Click on the 'Start' button and then click on 'Control Panel'.
3. Click on the 'Display' icon.
34

4.Ckick on the "Change display settings" button. Click the "Advanced Settings" button. Click the "Monitor" tab and then click the "Properties" button.
35

7.Click the "Driver" tab.
8. Open the "Update Driver Software-Generic PnP Monitor" window by clicking on "Update Driver... "and then click the "Browse my computer for driver software" button. 9. Select "Let me pick from a list of device drivers on my computer".
36

10. Click the "Have Disk" button. Click on the "Browse" button and navigate to the following directory: X:\Driver\module name (where X is the drive letter designator for the CD-ROM drive).
11. Select the "xxx.inf" file and click the "Open" button. Click the "OK" button. 12. Select your monitor model and click the "Next" button. The files will be copied from the CD to your hard disk drive.
3. Close all open windows and remove the CD. 14. Restart the system. The system will automatically select the maximum refresh rate and corresponding Color Matching Profiles.
37

Windows Vista
1. Click "Start " and "Control Panel". Then, double-click on "Appearance and Personalization". 2. Click "Personalization" and then "Display Settings". 3. Click "Advanced Settings...".
38

4. Click "Properties" in the "Monitor" tab. If the "Properties" button is deactivated, it means the configuration for your monitor is completed. The monitor can be used as is. If the message "Windows needs..." is displayed, as shown in the figure below, click "Continue".
5. Click "Update Driver..." in the "Driver" tab.
6. Check the "Browse my computer for driver software" checkbox and click "Let me pick from a list of device drivers on my computer".
7. Click on the 'Have disk...' button, then click on the 'Browse...' button and then select the appropriate drive F:\Driver (CD-ROM Drive). 8. Select your monitor model and click on the 'Next' button. 9. Click "Close"  "Close"  "OK"  "OK" on the following screens displayed in sequence.
39

Windows XP
1. Start Windows® XP 2. Click on the 'Start' button and then click on 'Control Panel'.
3. Select and click on the category ,,Appearance and Themes
4. Click on the 'Display' Item.
40

5. Select the 'Settings' tab then click on the 'Advanced' button.
6. Select 'Monitor' tab - If the 'Properties' button is inactive, it means your monitor is properly configured. Please stop installation. - If the 'Properties' button is active, click on 'Properties' button. Please follow the steps below.
7. Click on the 'Driver' tab and then click on 'Update Driver...' button.
41

8. Select the 'Install from a list or specific location [advanced]' radio button and then click on the 'Next' button.
9. Select the 'Don't Search. I will choose the driver to install' radio button. Then click on the 'Next' button.
10. Click on the 'Have disk...' button, then click on the 'Browse...' button and then select the appropriate drive F: (CD-ROM Drive).
11. Click on the 'Open' button, then click the 'OK' button. 12. Select your monitor model and click on the 'Next' button. - If you can see the 'has not passed Windows® Logo testing to verify its compatibility with Windows® XP' message, please click on the 'Continue Anyway' button. 13. Click on the 'Finish' button then the 'Close' button. 14. Click on the 'OK' button and then the 'OK' button again to close the Display Properties dialog box.
42

Windows 2000
1. Start Windows® 2000 2. Click on the 'Start' button, point to 'Settings', and then click on 'Control Panel'. 3. Double click on the 'Display' Icon. 4. Select the 'Settings' tab then click on 'Advanced...'. 5. Select 'Monitor' - If the 'Properties' button is inactive, it means your monitor is properly configured. Please stop installation. - If the 'Properties' button is active. Click on 'Properties' button. Please follow the steps given below. 6. Click on 'Driver' and then click on 'Update Driver...' then click on the 'Next' button. 7. Select 'Display a list of the known drivers for this device so that I can choose a specific driver', then click on
'Next' and then click on 'Have disk...'. 8. Click on the 'Browse...' button then select the appropriate drive F: ( CD-ROM Drive). 9. Click on the 'Open' button, then click on the 'OK' button. 10. Select your monitor model and click on the 'Next' button. 11. Click on the 'Finish' button then the 'Close' button. If you can see the 'Digital Signature Not Found' window, click on the 'Yes' button.
Windows ME
1. Start Windows® Me 2. Click on the 'Start' button, point to 'Settings', and then click on 'Control Panel'. 3. Double click on the 'Display' Icon. 4. Select the 'Settings' tab then click on 'Advanced...'. 5. Select the 'Monitor' button, then click on 'Change...' button. 6. Select 'Specify the location of the driver(Advanced)' and click on the 'Next' button. 7. Select 'Display a list of all the drivers in a specific location, so you can choose the driver you want', then click
on 'Next' and then click on 'Have Disk...'. 8. Click on the 'Browse...' button, select the appropriate drive F: ( CD-ROM Drive) then click on the 'OK' button. 9. Click on the 'OK' button, select your monitor model and click on the 'Next' button. 10. Click on 'Finish' button then the 'Close' button.
43

i-Menu
Welcome to "i-Menu" software by AOC. i-Menu makes it easy to adjust your monitor display setting by using on screen menus instead of the OSD button on the monitor. To complete installation, please follow the installation guide.
44

e-Saver
Welcome to use AOC e-Saver monitor power management software! The AOC e-Saver features Smart Shutdown functions for your monitors, allows your monitor to timely shutdown when PC unit is at any status (On, Off, Sleep or Screen Saver); the actual shutdown time depends on your preferences (see example below). Please click on "driver/e-Saver/setup.exe" to start installing the e-Saver software, follow the install wizard to complete software installation. Under each of the four PC status, you may choose from the pull-down menu the desired time (in minutes) for your monitor to automatically shutdown. The example above illustrated: 1) The monitor will never shutdown when the PC is powered on. 2) The monitor will automatically shutdown 5 minutes after the PC is powered off. 3) The monitor will automatically shutdown 10 minutes after the PC is in sleep/stand-by mode. 4) The monitor will automatically shutdown 20 minutes after the screen saver appears.
You can click "RESET" to set the e-Saver to its default settings like below.
45

Screen+
Welcome to "Screen+" software by AOC, Screen+ software is a desktop screen splitting tool, it splits the desktop into different panes, each pane displays a different window. You only need to drag the window to a corresponding pane, when you want to access it. It supports multiple monitor display to make your task easier. Please follow the installation software to install it.
46

Troubleshoot

Problem & Question

Possible Solutions

Power LED Is Not ON

Make sure the power button is ON and the Power Cord is properly connected to a grounded power outlet and to the monitor.

No images on the screen
Picture Is Fuzzy & Has Ghosting Shadowing Problem Picture Bounces, Flickers Or Wave Pattern Appears In The Picture
Monitor Is Stuck In Active Off-Mode"
Missing one of the primary colors (RED, GREEN, or BLUE)

Is the power cord connected properly? Check the power cord connection and power supply.
Is the cable connected correctly? (Connected using the D-sub cable) Check the DB-15 cable connection. (Connected using the DVI cable) Check the DVI cable connection. * DVI input is not available on every model.
If the power is on, reboot the computer to see the initial screen (the login screen), which can be seen. If the initial screen (the login screen) appears, boot the computer in the applicable mode (the safe mode for Windows ME/XP/2000) and then change the frequency of the video card. (Refer to the Setting the Optimal Resolution) If the initial screen (the login screen) does not appear, contact the Service Center or your dealer.
Can you see "Input Not Supported" on the screen? You can see this message when the signal from the video card exceeds the maximum resolution and frequency that the monitor can handle properly. Adjust the maximum resolution and frequency that the monitor can handle properly.
Make sure the AOC Monitor Drivers are installed.
Adjust the Contrast and Brightness Controls. Press to auto adjust. Make sure you are not using an extension cable or switch box. We recommend plugging the monitor directly to the video card output connector on the back .
Move electrical devices that may cause electrical interference as far away from the monitor as possible. Use the maximum refresh rate your monitor is capable of at the resolution your are using.
The Computer Power Switch should be in the ON position. The Computer Video Card should be snugly fitted in its slot. Make sure the monitor's video cable is properly connected to the computer. Inspect the monitor's video cable and make sure no pin is bent. Make sure your computer is operational by hitting the CAPS LOCK key on the keyboard while observing the CAPS LOCK LED. The LED should either turn ON or OFF after hitting the CAPS LOCK key.
Inspect the monitor's video cable and make sure that no pin is damaged. Make sure the monitor's video cable is properly connected to the computer.

Screen image is not centered or sized properly

Adjust H-Position and V-Position or press hot-key (AUTO).

Picture has color defects (white does not look white)

Adjust RGB color or select desired color temperature.

Horizontal or vertical disturbances on the screen

Use Windows 95/98/2000/ME/XP shut-down mode Adjust CLOCK and FOCUS. Press to auto-adjust.

47

Specification

General Specification

Panel Resolution

Model name Driving system Viewable Image Size Pixel pitch Video Separate Sync. Display Color Dot Clock Horizontal scan range Horizontal scan Size(Maximum) Vertical scan range Vertical scan Size(Maximum) Optimal preset resolution Plug & Play Input Connector
Input Video Signal
Power Source

Power Consumption

Off timer Speakers Connector Type Signal Cable Type
Physical Characteristics
Dimensions & Weight

Temperature Environmental Humidity
Altitude

E2460SDA

TFT Color LCD

61.0 cm diagonal

0. 27675 mm(H) x 0. 27675 mm(V)

R, G, B Analog lnterface

H/V TTL

16.7M Colors

165 MHz

30 kHz - 83 kHz

531.36 mm

50 Hz - 76 Hz

298.89 mm

1920 x 1080 (60 Hz)

VESA DDC2B/CI

D-Sub 15pin DVI 24pin

Analog: 0.7Vp-p(standard), 75 OHM, Positive & DVI-D Digital Interface

100-240V~, 50/60Hz

Active 28 W

Standby < 0.5 W

0~24 hrs

2W x 2

15-pin Mini D-Sub , DVI-D

Detachable

Height (with base)

411.6 mm

Width

565.4 mm

Depth

219.3 mm

Weight (monitor only) 4.48 kg

Operating

0°to 40°

Non-Operating

-25°to 55°

Operating

10% to 85% (non-condensing)

Non-Operating

5% to 93% (non-condensing)

Operating

0~ 3658m (0~ 12000 ft )

Non-Operating 48

0~ 12192m (0~ 40000 ft )

Panel Resolution

Model name Driving system Viewable Image Size Pixel pitch Video Separate Sync. Display Color Dot Clock Horizontal scan range Horizontal scan Size(Maximum) Vertical scan range Vertical scan Size(Maximum) Optimal preset resolution Plug & Play Input Connector
Input Video Signal
Power Source

Power Consumption

Off timer Speakers Connector Type Signal Cable Type
Physical Characteristics
Dimensions & Weight

Temperature Environmental Humidity
Altitude

E2460PDA

TFT Color LCD

61.0 cm diagonal

0. 27675 mm(H) x 0. 27675 mm(V)

R, G, B Analog lnterface

H/V TTL

16.7M Colors

165 MHz

30 kHz - 83 kHz

531.36 mm

50 Hz - 76 Hz

298.89 mm

1920 x 1080 (60 Hz)

VESA DDC2B/CI

D-Sub 15pin DVI 24pin

Analog: 0.7Vp-p(standard), 75 OHM, Positive & DVI-D Digital Interface

100-240V~, 50/60Hz

Active 28 W

Standby < 0.5 W

0~24 hrs

2W x 2

15-pin Mini D-Sub , DVI-D

Detachable

Height (with base)

393.6 mm~523.6mm

Width

565.4 mm

Depth

243.5 mm

Weight (monitor only) 6.38 kg

Operating

0°to 40°

Non-Operating

-25°to 55°

Operating

10% to 85% (non-condensing)

Non-Operating

5% to 93% (non-condensing)

Operating

0~ 3658m (0~ 12000 ft )

Non-Operating

0~ 12192m (0~ 40000 ft )

49

Preset Display Modes

STAND VGA
SVGA
XGA
SXGA WXGA+ WSXGA HD *** *** IBM-MODE DOS MAC-MODEVGA

RESOLUTION 640×480 @60Hz 640×480 @72Hz 640×480 @75Hz 800×600 @56Hz 800×600 @60Hz 800×600 @72Hz 800×600 @75Hz 1024×768 @60Hz 1024×768 @70Hz 1024×768 @75Hz 1280×1024@60Hz 1280×1024@75Hz 1440×900 @60Hz 1440×900 @60Hz 1680×1050 @60Hz 1920×1080 @60Hz 1280×720@60Hz 1280×960@60Hz 720×400@70Hz 640×480@67Hz 832×624@75Hz

HORIZONTAL FREQUENCY(kHZ) 31.469 37.861 37.5 35.156 37.879 48.077 46.875 48.363 56.476 60.023 63.981 79.976 55.935 55.469 65.29 67.5 45 60 31.469 35 49.725

VERTICAL FREQUENCY(Hz) 59.94 72.809 75 56.25 60.317 72.188 75 60.004 70.069 75.029 60.02 75.025 59.887 59.901 59.954 60 60 60 70.087 66.667 74.5

50

Pin Assignments

Pin Number 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15

15-Pin Side of the Signal Cable Video-Red Video-Green Video-Blue Ground Detect Cable GND-R GND-G GND-B +5V Ground Ground DDC-Serial data H-sync V-sync DDC-Serial clock

Pin No. Signal Name

1.

TMDS Data 2-

2.

TMDS Data 2+

3.

TMDS Data 2/4 Shield

4.

TMDS Data 4- / N.C.

5.

TMDS Data 4+ / N.C.

6.

DDC Clock

7.

DDC Data

8.

N.C.

Pin No. Signal Name

9.

TMDS Data 1-

10. TMDS Data 1+

11.

TMDS Data 1/3 Shield

12. TMDS Data 3- / N.C.

13. TMDS Data 3+ / N.C.

14. +5V Power

15. DVI Cable Detect

16. Hot Plug Detect

Pin No. Signal Name 17. TMDS Data 018. TMDS Data 0+ 19. TMDS Data 0/5 Shield 20. TMDS Data 5- / N.C. 21. TMDS Data 5+ / N.C. 22. TMDS Clock Shield 23. TMDS Clock + 24. TMDS Clock -

51

Plug and Play
Plug & Play DDC2B Feature This monitor is equipped with VESA DDC2B capabilities according to the VESA DDC STANDARD. It allows the monitor to inform the host system of its identity and, depending on the level of DDC used, communicate additional information about its display capabilities. The DDC2B is a bi-directional data channel based on the I2C protocol. The host can request EDID information over the DDC2B channel.
52

Regulation
FCC Notice
FCC Class B Radio Frequency Interference Statement WARNING: (FOR FCC CERTIFIED MODELS) NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy, and if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help.
NOTICE : The changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. Shielded interface cables and AC power cord, if any, must be used in order to comply with the emission limits. The manufacturer is not responsible for any radio or TV interference caused by unauthorized modification to this equipment. It is the responsibilities of the user to correct such interference. It is the responsibility of the user to correct such interference.
53

WEEE Declaration
Disposal of Waste Equipment by Users in Private Household in the European Union. This symbol on the product or on its packaging indicates that this product must not be disposed of with your other household waste.Instead, it is your responsibility to dispose of your waste equipment by handing it over to a designated collection point for the recycling of waste electrical and electronic equipment.The separate collection and recycling of your waste equipment at the time of disposal will help to conserve natural resources and ensure that it is recycled in a manner that protects human health and the environment. For more information about where you can drop off your waste equipment for recycling, please contact your local city office, your household waste disposal service or the shop where you purchased the product .
54

EPEAT Declaration
EPEAT is a system to help purchasers in the public and private sectors evaluate, compare and select desktop computers, notebooks and monitors based on their environmental attributes. EPEAT also provides a clear and consistent set of performance criteria for the design of products, and provides an opportunity for manufacturers to secure market recognition for efforts to reduce the environmental impact of its products. AOC believes in protecting the environment. With a key concern for the conservation of natural resources, as well as landfill protection, AOC announces the launch of AOC monitors packaging recycling program. This program is designed to help you discard of your monitor carton and filler materials properly. If a local recycling center is not available, AOC will recycle the packaging material for you, including foam filler and carton. AOC Display solution will only recycle AOC monitor packaging. Please refer to the following website address: Only for North and South American, excluding Brazil: http://us.aoc.com/about/environmental_impact For Germany: http://www.aoc-europe.com/en/service/tco.php For Brazil: http://www.aoc.com.br/2007/php/index.php?req=pagina&pgn_id=134
55

Service
Warranty Statement for Europe
LIMITED THREE-YEAR WARRANTY* AOC Color Monitors sold within Europe AOC International (Europe) BV warrants this product to be free from defects in material and workmanship for a period of Three (3) years after the original date of consumer purchase. During this period, AOC International (Europe) BV will, at its option, either repair the defective product with new or rebuilt parts, or replace it with a new or rebuilt product at no charge except as *stated below. The defective products that are replaced become the property of AOC International (Europe) BV.
If the product appears to be defective, please contact your local dealer or refer to the warranty card when attached to the product.
Deliver the product freight pre-paid, along with the dated proof of purchase, to the AOC Authorized Service Center. If you cannot deliver the product in person:
Pack it in its original shipping container (or equivalent) Put the RMA number on the address label Put the RMA number on the shipping carton Insure it (or assume the risk of loss/damage during shipment) Pay all shipping charges
AOC International (Europe) BV is responsible neither for any damage or loss during inbound transport damage nor to inbound product that was not properly packaged.
AOC International (Europe) BV will pay the return shipping charges within one of the countries specified within this warranty statement. AOC International (Europe) BV is not responsible for any costs associated with the transportation of product across international borders. This includes the international border within the European Union.
* This limited warranty does not cover any losses or damages that occur as a result of Shipping or improper installation or maintenance Misuse Neglect Any cause other than ordinary commercial or industrial application Adjustment by non-authorized source Repair, modification, or installation of options or parts by anyone other than an AOC Authorized Service Center Improper environment Excessive or inadequate heating or air conditioning or electrical powers failures, surges, or other irregularities
This limited warranty does not cover any of the product firmware or hardware that you or any third party have modified or altered; you bear the sole responsibility and liability for any such modification or alteration.
56

ALL EXPRESS AND IMPLIED WARRANTIES FOR THIS PRODUCT (INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE) ARE LIMITED IN DURATION TO A PERIOD OF THREE (3) YEARS FOR PARTS AND LABOR FROM THE ORIGINAL DATE OF CONSUMER PURCHASE. NO WARRANTIES (EITHER EXPRESSED OR IMPLIED) APPLY AFTER THIS PERIOD. AOC INTERNATIONAL (EUROPE) BV OBLIGATIONS AND YOUR REMEDIES HEREUNDER ARE SOLELY AND EXCLUSIVELY AS STATED HERE. AOC INTERNATIONAL (EUROPE) BV LIABILITY, WHETHER BASED ON CONTRACT, TORT, WARRANTY, STRICT LIABILITY, OR OTHER THEORY, SHALL NOT EXCEED THE PRICE OF THE INDIVIDUAL UNIT WHOSE DEFECT OR DAMAGE IS THE BASIS OF THE CLAIM. IN NO EVENT SHALL AOC INTERNATIONAL (EUROPE) BV BE LIABLE FOR ANY LOSS OF PROFITS, LOSS OF USE OR FACILITIES OR EQUIPMENT, OR OTHER INDIRECT, INCIDENTAL, OR CONSEQUENTIAL DAMAGE. SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE ABOVE LIMITATION MAY NOT APPLY TO YOU. ALTHOUGH THIS LIMITED WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS, YOU MAY HAVE OTHER RIGHTS, WHICH MAY VARY FROM COUNTRY TO COUNTRY. THIS LIMITED WARRANTY IS ONLY VALID FOR PRODUCTS PURCHASED IN THE MEMBER COUNTRIES OF THE EUROPEAN UNION. Information in this document is subject to change without notice. For more details, please visit: http://www.aoc-europe.com/en/service/index.php
57

Warranty Statement for North & South America (excluding Brazil)
WARRANTY STATEMENT for AOC Color Monitors Including those Sold within North America as Specified
Envision Peripherals, Inc. warrants this product to be free from defects in material and workmanship for a period of three (3) years for parts & labor and one (1) year for CRT Tube or LCD Panel after the original date of consumer purchase. During this period, EPI ( EPI is the abbreviation of Envision Peripherals, Inc. ) will, at its option, either repair the defective product with new or rebuilt parts, or replace it with a new or rebuilt product at no charge except as *stated below. The parts or product that are replaced become the property of EPI.
In the USA to obtain service under this limited warranty, call EPI for the name of the Authorized Service Center closest to your area. Deliver the product freight pre-paid, along with the dated proof of purchase, to the EPI Authorized Service Center. If you cannot deliver the product in person:
Pack it in its original shipping container (or equivalent) Put the RMA number on the address label Put the RMA number on the shipping carton Insure it (or assume the risk of loss/damage during shipment) Pay all shipping charges
EPI is not responsible for damage to inbound product that was not properly packaged. EPI will pay the return shipment charges within one of the countries specified within this warranty statement. EPI is not responsible for any costs associated with the transportation of product across international borders. This includes the international borders of the countries within this warranty statements.
In the United States and Canada contact your Dealer or EPI Customer Service, RMA Department at the toll free number (888) 662-9888. Or you can request an RMA Number online at www.aoc.com/na-warranty.
* This limited warranty does not cover any losses or damages that occur as a result of:
Shipping or improper installation or maintenance Misuse Neglect Any cause other than ordinary commercial or industrial application Adjustment by non-authorized source Repair, modification, or installation of options or parts by anyone other than an EPI Authorized Service Center Improper environment Excessive or inadequate heating or air conditioning or electrical power failures, surges, or other irregularities
This three-year limited warranty does not cover any of the product's firmware or hardware that you or any third party have modified or altered; you bear the sole responsibility and liability for any such modification or alteration.
58

ALL EXPRESS AND IMPLIED WARRANTIES FOR THIS PRODUCT (INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE) ARE LIMITED IN DURATION TO A PERIOD OF THREE (3) YEARS FOR PARTS AND LABOR AND ONE (1) YEAR FOR CRT TUBE OR LCD PANEL FROM THE ORIGINAL DATE OF CONSUMER PURCHASE. NO WARRANTIES (EITHER EXPRESSED OR IMPLIED) APPLY AFTER THIS PERIOD. IN THE UNITED STATES OF AMERICA, SOME STATES DO NOT ALLOW LIMITATIONS ON HOW LONG AN IMPLIED WARRANTY LASTS, SO THE ABOVE LIMITATIONS MAY NOT APPLY TO YOU.
EPI OBLIGATIONS AND YOUR REMEDIES HEREUNDER ARE SOLELY AND EXCLUSIVELY AS STATED HERE. EPI LIABILITY, WHETHER BASED ON CONTRACT, TORT. WARRANTY, STRICT LIABILITY, OR OTHER THEORY, SHALL NOT EXCEED THE PRICE OF THE INDIVIDUAL UNIT WHOSE DEFECT OR DAMAGE IS THE BASIS OF THE CLAIM. IN NO EVENT SHALL ENVISION PERIPHERALS, INC. BE LIABLE FOR ANY LOSS OF PROFITS, LOSS OF USE OR FACILITIES OR EQUIPMENT OR OTHER INDIRECT, INCIDENTAL, OR CONSEQUENTIAL DAMAGE. IN THE UNITED STATES OF AMERICA, SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES. SO THE ABOVE LIMITATION MAY NOT APPLY TO YOU. ALTHOUGH THIS LIMITED WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS. YOU MAY HAVE OTHER RIGHTS WHICH MAY VARY FROM STATE TO STATE.
In the United States of America, this limited warranty is only valid for Products purchased in the Continental United States, Alaska, and Hawaii. Outside the United States of America, this limited warranty is only valid for Products purchased in Canada.
Information in this document is subject to change without notice. For more details, please visit:
USA: http://us.aoc.com/support/warranty ARGENTINA: http://ar.aoc.com/support/warranty BOLIVIA: http://bo.aoc.com/support/warranty CHILE: http://cl.aoc.com/support/warranty COLOMBIA: http://co.aoc.com/warranty COSTA RICA: http://cr.aoc.com/support/warranty DOMINICAN REPUBLIC: http://do.aoc.com/support/warranty ECUADOR: http://ec.aoc.com/support/warranty EL SALVADOR: http://sv.aoc.com/support/warranty GUATEMALA: http://gt.aoc.com/support/warranty HONDURAS: http://hn.aoc.com/support/warranty NICARAGUA: http://ni.aoc.com/support/warranty PANAMA: http://pa.aoc.com/support/warranty PARAGUAY: http://py.aoc.com/support/warranty PERU: http://pe.aoc.com/support/warranty URUGUAY: http://pe.aoc.com/warranty VENEZUELA: http://ve.aoc.com/support/warranty IF COUNTRY NOT LISTED: http://latin.aoc.com/warranty
59

TCO DOCUMENT
60


Microsoft Office Word 2007 Microsoft Office Word 2007

Search Any Device: