RF EXPOSURE EVALUATION

zhaowen

MPE

Shenzhen Kaadas Intelligent Technology Co., Ltd. KA210A-P Smart Lock 2AQY4-KA210A-P 2AQY4KA210AP ka210a p

Shenzhen Kaadas Intelligent Technology Co., Ltd. ZWLR800 Z-Wave Module 2AQY4ZWLR800 2AQY4ZWLR800 zwlr800

PDF Viewing Options

Not Your Device? Search For Manuals or Datasheets below:


File Info : application/pdf, 2 Pages, 294.85KB

Document DEVICE REPORTGetApplicationAttachment.html?id=7907578 
RF EXPOSURE EVALUATION
KDB 447498 D01 Mobile and Portable Devices RF Exposure Procedures and Equipment Authorization Policies v06.
According to FCC 1.1310: The criteria listed in the following table shall be used to evaluate the environment impact of human exposure to radio frequency(RF) Radiation as specified in §1.1307(b)

EUT Specification

FCC ID EUT Frequency band (Operating)
Device category Exposure classification Antenna diversity
Antenna gain (Max) Evaluation applied

2AQY4ZWLR800
Z-Wave Module BT: 2.402GHz ~ 2.480GHz WLAN: 2.412GHz ~ 2.462GHz RLAN: 5.180GHz ~ 5.240GHz RLAN: 5.260GHz ~ 5.320GHz RLAN: 5.500GHz ~ 5.700GHz RLAN: 5.745GHz ~ 5.825GHz Others:908.4MHz~916MHz, 912MHz~920MHz Portable (<20cm separation) Mobile (>20cm separation) Others ___ Occupational/Controlled exposure (S = 5mW/cm2) General Population/Uncontrolled exposure (S=1mW/cm2) Single antenna Multiple antennas Tx diversity Rx diversity Tx/Rx diversity
-2.13dBi MPE Evaluation SAR Evaluation

Limits for Maximum Permissible Exposure(MPE)

Frequency

Electric Field Magnetic Field

Power

Range(MHz) Strength(V/m) Strength(A/m) Density(mW/cm2)

(A) Limits for Occupational/Control Exposures

300-1500

--

--

F/300

1500-100000

--

--

5

(B) Limits for General Population/Uncontrol Exposures

300-1500

--

--

F/1500

1500-100000

--

--

1

Average Time
6 6
6 30

Friis transmission formula: Pd=(Pout*G)\(4*pi*R2)

Where Pd= Power density in mW/cm2 Pout=output power to antenna in Mw G= gain of antenna in linear scale Pi=3.1416 R= distance between observation point and center of the radiator in cm Pd the limit of MPE, 1mW/cm2. If we know the maximum gain of the antenna and total power input to the antenna, through the calculation, we will know the distance where the MPE limit is reached.
Max Measurement Result

Measur ed
Operating Mode Power (dBm)
912MHz~920MHz 8.565 908.4MHz~916MHz -1.618

Tune up tolerance
(dBm) 8.565 ±1 -1.618 ±1

Max. Tune Antenna up Power Gain

(dBm) 9.565 -0.618

(dBi) -2.13 -2.13

Power

density at

Power

20cm density Limits

(mW/cm2 )

(mW/ cm2 )

0.0011

0.608

0.0001

0.605

Result: No Standalone SAR test is required.

Related FCC IDs:

Search Any Device: