User Guide
HP, Inc.
User Guide - ASRock
18 gen 2023 — Remove the screws on the monitor groove if needed before installing the stand. Place the monitor on a soft, protected surface to avoid scratching the ...
18 janv. 2023 — Remove the screws on the monitor groove if needed before installing the stand. Place the monitor on a soft, protected surface to avoid scratching the ...
ASRock Phantom Gaming PG34WQ15R3A, 34" Manual
User Manual for ASRock models including: PG34WQ15R3A, Curved Gaming Monitor, PG34WQ15R3A Curved Gaming Monitor, Gaming Monitor, Monitor
Not Your Device? Search For Manuals or Datasheets below:
File Info : application/pdf, 43 Pages, 2.46MB
Document DEVICE REPORT1aaf273f9c49928eee6fafd16849ec49d6e5Version 1.1
Table of Contents
Chapter 1 Introduction ............................................................................................................ 3 1.1 Package Contents....................................................................................................... 3 1.2 Installation Instructions ............................................................................................... 4
Chapter 2 Specifications......................................................................................................... 8 2.1 Monitor specifications ............................................................................................... 11 2.2 Preset Display Modes ............................................................................................... 13
Chapter 3 Monitor Overview ................................................................................................. 15 Chapter 4 Adjusting the Viewing Angle .............................................................................. 18 Chapter 5 Connecting the Monitor....................................................................................... 19 Chapter 6 Detaching the Stand (for VESA Wall Mount)..................................................... 20 Chapter 7 POLYCHROME SYNC User Guide ...................................................................... 24
7.1 PG Mini OLED ........................................................................................................... 24 7.2 POLYCHROME RGB ................................................................................................ 27 Chapter 8 OSD Setup ............................................................................................................ 29 8.1 OSD Keys .................................................................................................................. 29 8.2 OSD Menus (The descriptions for function control) .................................................. 30 Chapter 9 Troubleshooting................................................................................................... 36 Chapter 10 Safety Instructions............................................................................................. 37
Chapter 1 Introduction
Thank you for purchasing PG34WQ15R3A, a reliable monitor produced under ASRock's consistently stringent quality control. It delivers excellent performance with robust design conforming to ASRock's commitment to quality and endurance.
1.1 Package Contents
· ASRock PG34WQ15R3A Monitor Head · ASRock PG34WQ15R3A Stand · ASRock PG34WQ15R3A Quick Start Guide · DisplayPort Cable (DisplayPort to DisplayPort) · HDMI Cable · Power Cord · USB 2.0 Type-A to Type-C Cable · Wi-Fi Antenna Cables · Phantom Gaming Cable Sleeve
Important
Contact your place of purchase or local distributor if any of the items is damaged or missing. Package contents may vary by country. The included power cord is exclusively for this monitor and should not be used with other products.
3
1.2 Installation Instructions
Leave the monitor in its protective foam packaging. Align the latches of the stand to the monitor. Tighten the stand with screws. Connect the stand base to the stand and tighten the screw to secure the stand base. Align the latches to place the stand cover. Adjust the angle of the stand, make sure the stand assembly is properly installed before setting the monitor upright.
Important
Remove the screws on the monitor groove if needed before installing the stand. Place the monitor on a soft, protected surface to avoid scratching the display panel. Do not use any sharp objects on the panel. The groove for installing the stand bracket can also be used for wall mount. Please contact your dealer for proper wall mount kit.
4
5
6
7
8
9
10
Chapter 2 Specifications
2.1 Monitor specifications
Monitor Size Curvature Panel Type Resolution Digital Signal Frequency
Aspect Ratio Brightness (nits) Contrast Ratio Refresh Rate Response Time I/O Ports
View Angles Color Space Surface Treatment Display Colors Monitor Power Options Power Consumption
Adjustment (Tilt) Adjustment (Swivel) Adjustment (Height) VESA Mounting Dimension (W x H x D)
Weight
ASRock PG34WQ15R3A 34 inch 1500R VA 3440 x 1440 HDMI: 30kHz~160KHz (H); 48Hz~100Hz (V) DisplayPort: 30kHz~260KHz (H); 48Hz~165Hz (V) 21:9 550(Typ.) 3000:1(Typ.) 165Hz(Max.) 1ms(MPRT), 6ms(GTG) 1*DisplayPortTM 1.4 2*HDMITM 2.0 1*Earphone Jack(3.5 mm) 178°(H) / 178°(V) 91% DCI-P3 / sRGB 115% Anti-Glare 16.7M 100~240Vac, 50/60Hz, 1.5A Power On(Max) 100W; Power Saving: 0.5W; Power Off: 0.3W +23° ~ -5° +20° ~ -20° 0~120 mm · Plate Type: 100 x 100mm · Screw Type: M4 x 10 mm Dimension with Stand: 809.34*581.82*332.22mm Dimension without stand: 809.34*365.84*120.10mm 9.63 Kg (With Stand) 6.53 Kg (Without Stand)
11
Monitor Environment
ASRock PG34WQ15R3A
Operating · Temperature: 0 to 40 · Humidity: 10% to 85%, non-condensing · Altitude: 0 ~ 3658m
Storage · Temperature: -20 to 60 · Humidity: 5% to 80%, non-condensing · Altitude : 0~12192m
12
2.2 Preset Display Modes
Standard
Resolution
IBM MODE DOS VGA
SVGA XGA SXGA WXGA+ WSXGA+ ----
Full HD
QHD
720x400 @70Hz 640x480 @60Hz 640x480 @67Hz 640x480 @72Hz 640x480 @75Hz 800x600 @56Hz 800x600 @60Hz 800x600 @72Hz 800x600 @75Hz 1024x768 @60Hz 1024x768 @70Hz 1024x768 @75Hz 1280x1024 @60Hz 1280x1024 @75Hz 1440x900 @60Hz 1680x1050 @60Hz 1152x864 @75Hz 1280x960 @60Hz 1280x720 @60Hz 1920x1080 @60Hz 1920x1080 @100Hz 1920x1080 @120Hz 1920x1080 @144Hz 1920x1080 @165Hz 1920x1080 @240Hz 2560x1440 @60Hz 2560x1440 @120Hz 2560x1440 @144Hz 2560x1440 @165Hz
PG34WQ15R3A
Remark
HDMI DP HDR
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
DTD
V
V
DTD
13
WQHD
3440x1440 @60Hz
3440x1440 @85Hz 3440x1440 @100Hz 3440x1440 @120Hz 3440x1440 @144Hz
V
V
V
DTD (Default)
V
V
V DTD
V
V
V DTD
V
V DTD
3440x1440 @165Hz 3840x2160 @60Hz
V
V DTD
UHD
3840x2160 @120Hz
3840x2160 @144Hz
640x480P 59.94/60Hz 4:3
720x480P 59.94/60Hz 4:3
720x480P 59.94/60Hz 16:9
V
V
720x576P 50Hz 4:3
V
V
720x576P 50Hz 16:9
V
1280x720P 50Hz 16:9
V
V
Video Timing
1280x720P 59.94/60Hz 16:9
V
V
Resolution
1920x1080P 59.94/60Hz 16:9
V
V
V
1920x1080P 119.88/120Hz 16:9/1:1
V
V
2160P @25Hz
2160P @30Hz
V
2160P @50Hz
V
V
2160P @60Hz
V
V
2160p @120Hz
14
Chapter 3 Monitor Overview
Front view
No. Item 1 Power Indicator
LED Indication · Blue - Power on mode · Orange - Standby mode · LED Off - Off mode
15
Back side
No. Description 2 Power and OSD Keys 3 Antenna Ports (SMA Connectors) 4 USB Type C port 5 Serial Label 6 Cable Management Slot 7 Built-in Speakers (2x2W)
16
Bottom Side
No. Item 5 AC input 6 HDMI input 7 HDMI input 8 DisplayPort input 9 Audio output
17
Chapter 4 Adjusting the Viewing Angle
For optimal viewing, it is recommended to look at the full face of the monitor, and then adjust the monitor's angle to your own preference. Hold the stand so you do not topple the monitor when you adjust the monitor's angle. You are able to adjust the tilted angle from -5° to 23°.
Important
Avoid touching the display panel when adjusting the monitor. You are able to swivel the monitor for the angle.
NOTE: Do not touch the LCD screen when you adjust the angle. It may cause damage or break the LCD screen. Careful attention is required not to catch your fingers or hands when you adjust the angle.
18
Chapter 5 Connecting the Monitor
1. Turn off your computer. 2. Connect the video cable from the monitor to your computer. 3. Connect the power cord to the monitor power jack. 4. Plug the power cord into the electrical outlet. 5. Turn on the monitor. 6. Power on the computer and the monitor will auto detect the signal source. 7. Plug one end of the DisplayPort/HDMI cable to the monitor's DisplayPort/HDMI port.
*Use either the HDMI or DisplayPort connection for display. 8. Connect the other end of the DisplayPort/HDMI cable to your computer's
DisplayPort/HDMI port.
9. Connecting antenna cables between the monitor and the antenna ports on PC.
19
10. Connecting the monitor to your pc via the USB Type A-to-C cable *The USB Type-C port is used for power supply and signal input for the front PG Mini OLED and the rear ARGB Lighting.
20
Chapter 6 Detaching the Stand (for VESA Wall Mount)
Important
Avoid damaging the monitor surface. While detaching the monitor stand, always keep the monitor inside its EPS packaging. 1. Disconnect power and signal cables. Carefully put the monitor face down on its EPS packaging 2. Press the Push-Button.
3. Lift the stand and Detach it from the VESA Adapter.
21
4. Remove the four (4) screws. 5. Remove the VESA Adapter from the Head of Your Monitor.
22
6. You Can Start Installing VESA Wall Mount (100x100mm) Now! 23
Chapter 7 POLYCHROME SYNC User Guide
7.1 PG Mini OLED Step1: Connect the monitor stand to your PC via the USB Type A-to-C cable. Please Note: The USB Type-C port on the stand is used for power supply and signal input for the front PG Mini OLED and the rear ARGB lighting.
Step2: Download and Install the POLYCHROME SYNC software.
Step3: Open the POLYCHROME SYNC Software.
24
Step4: Upload your GIF or image files.
Please note: If you don't upload anything, the default image would be the Phantom Gaming Logo. Besides, if you upload only one picture, it will play alternately with the PG logo to avoid screen burn-in.
25
Step 5: Adjust and apply your settings.
Tips: PG Mini OLED will enable sleep mode after displaying images for a while (depending on the Screen Saver Time). You can click the "Resume" button to awaken your PG Mini OLED.
26
7.2 POLYCHROME RGB Step1: Select the lighting zone you want to adjust.
Step2: Enter the lighting mode setting.
27
Step3: Choose a lighting effect for the monitor rear ARGB lighting. Step4: Customize you ARGB lighting color from the palette.
28
Chapter 8 OSD Setup
This chapter provides you with essential information on OSD Setup.
Important
All information is subject to change without prior notice.
8.1 OSD Keys
No. Item
1
Navi Key
2
Preset Modes
3
Brightness
4
Power
Description A multi-directional control that helps navigate the OnScreen Display (OSD) menu. Activates the Presets Modes function when the OSD is OFF, navigate through adjustment icons when OSD is ON, or adjust a function when function is activated. Adjusts the backlight when the OSD is OFF.
Press the power button to turn on the monitor.
29
8.2 OSD Menus (The descriptions for function control)
Function: Luminance
Main Menu Item Luminance
Sub Menu Item Contrast
Brightness
Preset Modes
DCR MPRT
Sub Menu Description
0-100
0-100 Standard Text Internet Game Movie Sports On Off On
Contrast from Digitalregister. Backlight Adjustment Standard Mode Text Mode Internet Mode Game Mode Movie Mode Sports Mode Dynamic contrast ratio
MPTRT function On/Off
30
Function: Image Setup
Main Menu Item Image Setup
Sub Menu Item Image Ratio
OD
FreeSync Premium HDR
Sub Menu
Full Aspect On Off On Off Auto Off
Description
Select Image Aspect Ratio Overdrive Adjustment
FreeSync Premium On or Off HDR Auto or Off
31
Function: Color Temp.
Main Menu Sub Menu
Item
Item
Color Temp.
Warm
Normal
Cool
User
sRGB
Sub Menu Description
Red Green Blue
Recall Warm Color Temperature from EEPROM. Recall Normal Color Temperature from EEPROM. Recall Cool Color Temperature from EEPROM. Red Gain from Digitalregister. Green Gain from Digital-register. Blue Gain from Digitalregister. Recall sRGB Color Temperature from EEPROM.
32
Low Blue Light
0~10(Level)
Phantom Gaming Monitor with ASRock Low Blue Light Technology reduces the emission of harmful blue lights on a display to prevent eye fatigue.
33
Function: OSD Setup
Main Menu Item OSD Setup
Sub Menu Item
H. Position
V. Position
Timeout
Language
Sub Menu Description
0-100 0-100 5-100
Adjust the horizontal position of OSD Adjust the vertical position of OSD Adjust the OSD Timeout Select the OSD language
34
Function: Extra
Main Menu Item Extra
Sub Menu Item Input Select
DDC/CI Reset Information
Sub Menu Description
Auto
Select input source
HDMI1
HDMI2
DisplayPort
On or Off
Turn ON/OFF DDC/CI Support
Reset the menu to Yes or No
default.
Show the information
of the main image
source.
35
Chapter 9 Troubleshooting
Problem and Question
Possible Solution
Power LED is not on · Check if the Power Switch is in the ON position. · Power Cord should be connected.
No signal
· Check that the signal-cable is properly connected. If the connector is loose, tighten the connector's screws. · Check the signal-cable's connection pins for damage.
Picture is fuzzy
· Adjust the Contrast and Brightness Controls.
Picture bounces or a wave pattern is present in the picture
· Move electrical devices that m·ay cause electrical interference.
The power LED is
ON (Orange) but
there's no video or no picture.
· Computer Power Switch should be in the ON position. · Computer Video Card should be snugly seated in its slot. · Make sure Monitor's video cable is properly connected to the computer. · Inspect Monitor's video cable and make sure none of the pins are bent. · Make sure computer is operational by hitting the CAPS LOCK key on the keyboard while observing the CAPS LOCK LED.The LED should either turn ON or OFF after hitting the CAPS LOCK key.
Missing one of the primary colors (RED, GREEN, or BLUE)
· Inspect the Monitor's video cable and make sure that none of the pins are bent.
Picture has color · Adjust RGB color or select color temperature. defects (white does
not look white)
Poor brightness or contrast
· When the brightness of the screen lowers after being used for a certain period and the function of the display is affected, send it to our authorized service center for repair.
Unable to open OSD · Turn off your monitor, unplug the power cord and plug it back in,
menu.
then power on the monitor.
· Check if the OSD menu is locked? If so, please press and hold the
Navi Key for 5~6 seconds to unlock the OSD menu.
36
Chapter 10 Safety Instructions
· Read the safety instructions carefully and thoroughly. · All cautions and warnings on the device or User Guide should be noted. · Refer servicing to qualified personnel only.
Power
· Make sure that the power voltage is within its safety range and has been adjusted properly to the value of 100~240V before connecting the device to the power outlet. · If the power cord comes with a 3-pin plug, do not disable the protective earth pin from the plug. The device must be connected to an earthed mains socket-outlet. · Please confirm the power distribution system in the installation site shall provide the circuit breaker rated 120/240V, 20A (maximum). · Always disconnect the power cord or switch the wall socket off if the device would be left unused for a certain time to achieve zero energy consumption. · Place the power cord in a way that people are unlikely to step on it. Do not place anything on the power cord. · If this device comes with an adapter, use only the ASRock provided AC adapter approved for use with this device.
European Union:
Batteries, battery packs, and accumulators should not be disposed of as unsorted household waste. Please use the public collection system to return, recycle, or treat them in compliance with the local regulations.
California, USA:
The button cell battery may contain perchlorate material and requires special handling when recycled or disposed of in California. For further information please visit: https://dtsc.ca.gov/perchlorate/
37
Environment
· To reduce the possibility of heat-related injuries or of overheating the device, do not place the device on a soft, unsteady surface or obstruct its air ventilators. · Use this device only on a hard, flat and steady surface. · To prevent the device from tipping over, secure the device to a desk, wall or fixed object with an anti-tip fastener that helps to properly support the device and keep it safe in place. · To prevent fire or shock hazard, keep this device away from humidity and high temperature. · Do not leave the device in an unconditioned environment with a storage temperature above 60 or below -20, which may damage the device. · The maximum operating temperature is around 40. · When cleaning the device, be sure to remove the power plug. Use a piece of soft cloth rather than industrial chemical to clean the device. Never pour any liquid into the opening; that could damage the device or cause electric shock. · Always keep strong magnetic or electrical objects away from the device. · If any of the following situations arises, get the device checked by service personnel: · The power cord or plug is damaged. · Liquid has penetrated into the device. · The device has been exposed to moisture. · The device does not work well or you can not get it working according to the User Guide. · The device has dropped and damaged. · The device has obvious sign of breakage.
Warning!
Overuse of screens is likely to affect eyesight.
Recommendations:
Take a 10-minute break for every 30 minutes of screen time. Children under 2 years of age should have no screen time. For children aged 2 years and over, screen time should be limited to less than one hour per day.
38
CE Conformity
This device complies with the requirements set out in the Council Directive on the Approximation of the Laws of the Member States relating to Electromagnetic Compatibility (2014/30/EU), Low-voltage Directive (2014/35/EU), ErP Directive (2009/125/EC) and RoHS directive (2011/65/EU). This product has been tested and found to comply with the harmonized standards for Information Technology Equipment published under Directives of Official Journal of the European Union.
ASRock Contact Information
ASRock EUROPE B.V. Address : Bijsterhuizen 11-11, 6546 AR Nijmegen,The Netherlands Phone: +31-24-345-44-33
Technical Support
Phone: +31-24-345-44-33 Online Support https://event.asrock.com/tsd.asp
Product information for EU energy label
https://eprel.ec.europa.eu/qr/1115756
39
FCC-B Radio Frequency Interference Statement
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the measures listed below: · Reorient or relocate the receiving antenna. · Increase the separation between the equipment and receiver. · Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. · Consult the dealer or an experienced radio/television technician for help. Notice 1 The changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. Notice 2 Shielded interface cables and AC power cord, if any, must be used in order to comply with the emission limits. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: This device may not cause harmful interference, and This device must accept any interference received, including interference that may cause undesired operation.
ASRock Contact Information
ASRock America, Inc. Address : 13848 Magnolia Ave, Chino, CA91710, U.S.A. Phone: +1-909-590-8308
Technical Support
Phone: +1-909-590-8308 Online Support https://event.asrock.com/tsd.asp
40
WEEE Statement
Under the European Union ("EU") Directive on Waste Electrical and Electronic Equipment, Directive 2012/19/EU, products of "electrical and electronic equipment" cannot be discarded as municipal waste anymore and manufacturers of covered electronic equipment will be obligated to take back such products at the end of their useful life.
Chemical Substances Information
In compliance with chemical substances regulations, such as the EU REACH Regulation (Regulation EC No. 1907/2006 of the European Parliament and the Council), ASRock provides the information of chemical substances in products at:
RoHS Statement
Japan JIS C 0950 Material Declaration
A Japanese regulatory requirement, defined by specification JIS C 0950, mandates that manufacturers provide material declarations for certain categories of electronic products offered for sale after July 1, 2006.
India RoHS
This product complies with the "India E-waste (Management and Handling) Rule 2016" and prohibits use of lead, mercury, hexavalent chromium, polybrominated biphenyls or polybrominated diphenyl ethers in concentrations exceeding 0.1 weight % and 0.01 weight % for cadmium, except for the exemptions set in Schedule 2 of the Rule.
The terms HDMI, HDMI High-Definition Multimedia Interface, HDMI trade dress and the HDMI Logos are trademarks or registered trademarks of HDMI Licensing Administrator, Inc.
41
Copyright and Trademarks Notice
Copyright © ASRock Inc. All rights reserved. The ASRock logo used is a registered trademark of ASRock Inc. All other marks and names mentioned may be trademarks of their respective owners. No warranty as to accuracy or completeness is expressed or implied. ASRock reserves the right to make changes to this document without prior notice.
Technical Support
If a problem arises with your product and no solution can be obtained from the user's manual, please contact your place of purchase or local distributor. Alternatively, please visit https://www.asrock.com for further guidance.
42
Copyright Notice
No part of this documentation may be reproduced, transcribed, transmitted, or translated in any language, in any form or by any means, except duplication of documentation by the purchaser for backup purpose, without written consent of ASRock Inc. Products and corporate names appearing in this documentation may or may not be registered trademarks or copyrights of their respective companies, and are used only for identification or explanation and to the owners' benefit, without intent to infringe. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Disclaimer
Because the monitor specifications and the firmware might be updated, the content of this documentation will be subject to change without notice. In case any modifications of this documentation occur, the updated version will be available on ASRock's website without further notice. If you require technical support related to this motherboard, please visit our website for specific information about the model you are using. You may find the latest monitor support list on ASRock's website as well. ASRock Website: http://www.asrock.com
43
ASRock
dtsc.ca.gov/perchlorate/
ASRock > Support Request Form