Chug FM01 Item Locator Instruction Manual

Chug FM01 Item Locator

Chug-FM01-Item-Locator-PRODUCT

Product Specifications

Model: PYS-BT24001
Dimensions: 3.5in x 5in x 14in
Power Source: CR2032 Coin Battery
Origin: Made in Vietnam

Product Usage Instructions

Description Chug-FM01-Item-Locator-fig- (1) Package Contents: The item locator package includes the key chain device with an LED indicator and a power button. Compatibility: The item locator is compatible with devices linked to your Apple ID. Item Locator Setup Instructions

Link the item locator to your Apple ID.
Tap 'Finish' to complete the setup process.

Enabling Lost Mode: To enable Lost Mode on the device, follow the instructions provided in the manual.

Open the Find My app > Items > your item > Lost Mode > Enable.
Read the instructions, tap ‘Continue’ and enter a phone number or email address.
Confirm the information, customize the lost message, and tap ‘Activate’ to complete.

Play Sound Open the Find My app › Items › select your item › Play Sound. Removing the Device: To remove the device, follow the guidelines outlined in the manual. Open the Find My app › Items › select your item › Remove Item › Remove. Note: After removing the device in the app, the device will beep and the light will flash 6 times to re-enter pairing mode. To turn off the device, quickly press the button 5 times. If there is no re-pairing within 10 minutes, the device will leave pairing mode and you will need to re-enter pairing mode by pressing the button once. It will ring and flash once. Troubleshooting: If you encounter any issues with the item locator, refer to the troubleshooting section in the manual for assistance.

IMPORTANT: When paring a device with the Find My app, the phone will link to the Apple Server. Pairing may fail because of network problems. The following actions are recommended:
Change the phone's network, such as switching between Wi-Fi and mobile network.
Factory reset for the device: When the device is powered on, double-click the device button. The device will beep, then immediately long press the device button for eight seconds until the device beeps and the light flashes three times. Release the button to complete the factory reset.

Replacing the Battery:

If the item locator stops working, replace the CR2032 coin battery. Use a screwdriver to remove the screw and open the battery back cover and remove the old battery.
Use a screwdriver to open the battery back cover and replace the old battery with a new one. Insert the new battery in the proper direction as indicated by the positive (+) and negative (-) symbols and replace the battery back cover and tighten the screw.

Safety Instructions: When cleaning the device, use a soft dry cloth to avoid damaging any components. When using this product, basic precautions should always be followed, including the following:

Read all of the instructions before using the product
To reduce the risk of injury, close supervision is necessary when the product is used near children
Do not modify or repair this device
Do not use in high temperatures or extreme weather
Do not use chemical detergents to clean your device, use a soft dry cloth

WARNING: Contains coin battery

INGESTION HAZARD: This product contains a button cell or coin battery.
DEATH or serious injury can occur if ingested.
A swallowed button cell or coin battery can cause Internal Chemical Burns in as little as 2 hours.
KEEP new and used batteries OUT OF REACH OF CHILDREN
Seek immediate medical attention if a battery is suspected to be swallowed or inserted inside any part of the body.

WARNING

Remove and immediately recycle or dispose of used batteries according to local regulations and keep them away from children. Do NOT dispose of batteries in household trash or incinerate them.
Even used batteries may cause severe injury or death.
Call a local poison control centre for treatment information.
The alarm clock contains a CR2032 coin/button cell battery.
The battery voltage is 3V.
The non-rechargeable battery is not to be recharged.
Do not force discharge, recharge, disassemble, heat above (manufacturer's specified temperature rating) or incinerate. Doing so may result in injury due to venting, leakage or explosion resulting in chemical burns.

Battery Warning:

Ensure the batteries are installed correctly according to polarity (+ and -).
Do not mix old and new batteries, different brands or types of batteries, such as alkaline, carbon-zinc, or rechargeable batteries.
Remove and immediately recycle or dispose of batteries from equipment not used for an extended period of time according to local regulations.
Always completely secure the battery compartment. If the battery compartment does not close securely, stop using the product, remove the batteries, and keep them away from children.

FCC ID: 2AO23-FM01 Model: PYS-BT24001 Made in Vietnam This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions:

this device may not cause harmful interference, and
this device must accept any interference received, including interference that may cause undesired operation.

Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used by the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.

The device has been evaluated to meet general RF exposure requirements. The device can be used in portable exposure conditions without restriction. For qualified repair specialists requesting repair information and parts please contact the original manufacturer at [email protected] Just what you need, priced just right.™ 100% Satisfaction Guaranteed or your Money Back We welcome any questions you may have at Target.com/comments or 1-800-910-6874. Package Contents Item Locator - 1 Compatibility iOS or iPadOS 14.5 or newer Item Locator Setup Instructions

Hold the power button for 5 seconds to power on/off, be sure to remove the protective film on the battery, the device will beep and the light will flash three times. Note: You can check if your device is on by clicking the button 2 times. If it beeps and the indicator light flash three times, then the device is on.
To pair the device to your phone, open the Find My app.
Make sure the device is close to your phone. Then click Items > Add Other Item.
Once detected, click the tip ‘Connect’ and enter a name ‘Locator’.
Click on the tip ‘Agree’ to acknowledge that this item will be linked to your Apple ID and then the tap ‘Finish’.

Frequently Asked Questions

Q: What should I do if the item locator is not working? A: If the item locator is not functioning properly, try replacing the CR2032 coin battery following the instructions provided in the manual. Q: How can I contact customer support for repair information? A: For repair information and parts, please contact the original manufacturer at [email protected]

Documents / Resources

Chug FM01 Item Locator [pdf] Instruction Manual
FM01 Item Locator, FM01, Item Locator, Locator

References

Documents - chug – FM01

	[pdf] User Manual 2024 05 20 Find My Item Tracker Instruction Manual 057 00 6004 待实验室确认 user manual Chug Inc FM01 Locator 2AO23 2AO23FM01 fm01 cut line fold line ITEM LOCATOR INSTRUCTION MANUAL 3.5in WARNING: Contains coin battery WARNING ... rely, stop using the product, remove the batteries, and keep them away from children. FCC ID: 2AO23-FM01 Model: PYS-BT24001 Made in Vietnam This device complies with Part 15 of the FCC rules. Operatio... lang:en score:36 filesize: 1.65 M page_count: 1 document date: 2024-06-03
	[pdf] Test Report SAR Rating kevin liang 24041510743RFC 2 SAR Test Exclusion Evaluation Report Rev 1 Chug Inc FM01 Item Locator 2AO23 2AO23FM01 fm01 Page 1 of 8 Report No.: 24041510743RFC-2 SAR TEST EXCLUSION EVALUATION REPORT Product Name: Item Locator Trade Mark: Model No./HVIN: PYS-BT24001 Report Number: 24041510743RFC-2 Test Standards: FCC 47 CFR Part 2.1093 FCC ID: 2AO23-FM01 Test Result: PASS Date of Issue: June 11, 2024 Prepared for: Ch... lang:en score:25 filesize: 723.53 K page_count: 8 document date: 2024-06-11
	[pdf] Product Photos Teardown kevin liang APPENDIX 2 EUT Internal Photos Chug Inc FM01 Item Locator 2AO23 2AO23FM01 fm01 Page 1 of 4 FCC ID: 2AO23-FM01 APPENDIX 2 PHOTOS OF EUT CONSTRUCTIONAL DETAILS EUT INTERNAL PHOTOS EUT Photo EUT Photo Shenzhen UnionTrust Quality and Technology Co., Ltd. Address: Unit D/E of 9/F and 16/F, Block A, Building 6, Baoneng science and technology park, Longhua district, Shenzhen, C... lang:tl score:22 filesize: 2.89 M page_count: 4 document date: 2024-06-05
	[pdf] Product Photos kevin liang APPENDIX 2 EUT External Photos Chug Inc FM01 Item Locator 2AO23 2AO23FM01 fm01 Page 1 of 2 FCC ID: 2AO23-FM01 APPENDIX 2 PHOTOS OF EUT CONSTRUCTIONAL DETAILS EUT EXTERNAL PHOTOS EUT Photo EUT Photo Shenzhen UnionTrust Quality and Technology Co., Ltd. Address: Unit D/E of 9/F and 16/F, Block A, Building 6, Baoneng science and technology park, Longhua district, Shenzhen, C... lang:tl score:21 filesize: 1.25 M page_count: 2 document date: 2024-06-05
	[pdf] Test Report kevin liang 24041510743RFC 1 FCC BLE Report Rev Chug Inc FM01 Item Locator 2AO23 2AO23FM01 fm01 Page 1 of 31 Report No.: 24041510743RFC-1 FCC TEST REPORT Product Name: Item Locator Trade Mark: Model No.: PYS-BT24001 Report Number: 24041510743RFC-1 Test Standards: FCC 47 CFR Part 15 Subpart C FCC ID: 2AO23-FM01 Test Result: PASS Date of Issue: June 11, 2024 Prepared for: Chug,Inc. 7157 Shady ... lang:en score:20 filesize: 2.27 M page_count: 31 document date: 2024-06-11
	[pdf] Antenna Report Chug Inc FM01 Item Locator 2AO23 2AO23FM01 fm01 ... lang:en score:13 filesize: 162.84 K page_count: 0 document date: 0000-00-00
	[pdf] APPENDIX 1 TEST SETUP Chug Inc FM01 Item Locator 2AO23 2AO23FM01 fm01 ... lang:en score:13 filesize: 670.3 K page_count: 0 document date: 0000-00-00
	[pdf] ACB FORM FCC Application Letters Agency Letter Chug Inc FM01 Item Locator 2AO23 2AO23FM01 fm01 ... lang:en score:12 filesize: 134.15 K page_count: 0 document date: 0000-00-00
	[pdf] ACB FORM FCC Application Letters Covered List Attestation Chug Inc FM01 Item Locator 2AO23 2AO23FM01 fm01 ... lang:en score:12 filesize: 180.27 K page_count: 0 document date: 0000-00-00
	[pdf] Label item locator Label Placement 2024 05 14 OL label Chug Inc FM01 Item Locator 2AO23 2AO23FM01 fm01 ... lang:en score:12 filesize: 386.32 K page_count: 1 document date: 2024-05-17
	[pdf] Confidentiality Request Letter ACB FORM FCC Application Letters Confidentiality Letter Rev 1 Chug Inc FM01 Item Locator 2AO23 2AO23FM01 fm01 ... lang:en score:12 filesize: 160.7 K page_count: 0 document date: 0000-00-00
	[pdf] Agent Authorization ACB FORM FCC Application Letters U S Agent Letter for Service of Process Chug Inc FM01 Item Locator 2AO23 2AO23FM01 fm01 ... lang:en score:11 filesize: 94.96 K page_count: 0 document date: 0000-00-00