ZAGG pro keys 2 Bluetooth Keyboard User Guide

ZAGG pro keys 2 Bluetooth Keyboard

ZAGG-pro-keys-2-Bluetooth-Keyboard-PRODUCT Welcome For a full instruction manual, please visit zagg.com/user-guides. The Pro Keys 2 is comprised of two pieces: a detachable keyboard and a case with a foldable folio cover.

Inserting Your Device

Inserting Your Device into the Case:

Holding your device in landscape mode with the volume control buttons facing up, press the top half of your device into the case and apply light pressure all around to snap it snuggly into place.

Removing Your Device

Removing Your Device from the Case

Hold on to the top lip of the case and press against the back of the case. Then, grasp the exposed side of your device and lift/pull it away from the cover.

Attaching/Detaching the Keyboard from the Case

The top of the keyboard and the bottom of the case are magnetized and will snap securely together. They can be detached with a light pull.
The folio-style flap (attached to the case) is also magnetized. It has a light magnetic attachment to the back of the keyboard. It allows the keyboard to slide along the flap to form a stand but prevents the keyboard from slipping.

Forming the Stand

To use the stand function, the keyboard and case should be connected. Raise the case (with your device inside) to a standing 90 angle from the keyboard.
Lift the bottom of the keyboard off of the folio-style flap and pull the keyboard forward (toward you). The stand will unfold at the back.

Powering On/Off

Press the Power button to turn your Pro Keys 2 keyboard on. A green LED will light briefly. Press and hold the power button for three seconds to turn your Pro Keys 2 keyboard off. A red LED will flash indicating it has turned off.

Pairing the Keyboard with Your Device

Verify your device's Bluetooth® settings are on. Press and hold Pro Key 2's Bluetooth I button for three seconds. A blue LED under the power button will flash until pairing is complete.
Select "ZAGG Pro Keys 2" from your device's list of available devices to complete pairing.
To pair a second device, press and hold the Bluetooth 2 button for three seconds, and follow the same procedure.

Charging Your Keyboard

Plug the Type-C end of the charging cable into the Type-C port on the keyboard (night side). Plug the other end of your charging cable into your preferred USB charging outlet. A red LED light on the battery key will illuminate to show that your keyboard is charging.
When this light turns off, your Pro Keys 2 keyboard is finished charging. Disconnect the charging cable.

Disconnecting Your Keyboard

First, detach the keyboard from the case.
There are three ways to switch to your onscreen keyboard.

Press the Keyboard Hide/Show button.
Turn off the Bluetooth connection from your device.
Turn the Pro Keys 2 keyboard off.

Checking Your Battery Level:

To check your Pro Keys 2's battery life, press fn + the battery key. The LED light will flash one of the following three ways:
3 green flashes = 50% or more battery life
2 yellow flashes = 25-49% battery life
I read flash = less than 25% battery life

Trouble Shooting

If your device doesn't respond to Pro Keys 2, there may be a simple explanation. Try the following steps.

Restart your device.
Turn your Pro Keys 2 off and back on.
Download the ZAGG Keyboard Firmware Utilities App from the App Store for the latest firmware updates. For more details, visit: https://bit.ly/3R8q6yO
Forget and re-pair your Pro Keys 2.
If your Pro Keys 2 does not establish or maintain a Bluetooth connection, reset the Bluetooth module by charging your keyboard.
If, after charging, your keyboard doesn't operate correctly, please contact ZAGG Customer Service.

If you still experience problems, please contact ZAGG Customer Service at zagg.com/support/contact.php [email protected]
1-800-700-ZAGG [9244] 00-1-80 1-839-3906 for international customers

FCC

WARNING Keyboard use may be associated with physical injuries. If you experience any discomfort or pain, stop using your keyboard and consult a physician. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

This device may not cause harmful interference,
this device must accept any interference received, including interference that may cause undesired operation.

©2024 ZAGG Inc. All Rights Reserved, ZAGG®, and Pro Keys" are trademarks of ZAGG Inc. iPad® is a trademark of Apple Inc., registered in the U.S. and other countries. The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by ZAGG Inc. is under license. Other trademarks and trade names are those of their respective owners. FCC Caution: This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

This device may not cause harmful interference
this device must accept any interference received, including interference that may cause undesired operation.

Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, under part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used under the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures.

Reorient or relocate the receiving antenna.
Increase the separation between the equipment and the receiver.
Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.

The device has been evaluated to meet general RF exposure requirements. The device can be used in portable exposure conditions without restriction.

Documents / Resources

ZAGG pro keys 2 Bluetooth Keyboard [pdf] User Guide
ZKPIB13, QTG-ZKPIB13, QTGZKPIB13, zkpib13, pro keys 2 Bluetooth Keyboard, pro keys 2, Bluetooth Keyboard, Keyboard

Documents - zagg – ZKPIB13,QTG-ZKPIB13,QTGZKPIB13

	[pdf] Please produce a letter on your company letterhead with the following information Admin Attestation Statements ZAGG Inc ZKPIB13 Pro Keys 2 QTG QTGZKPIB13 zkpib13 ZAGG Inc. 2024.9.2 Eurofins Electrical and Electronic Testing NA, Inc. 914 West Patapsco Avenue Baltimore, MD 21230 RE: Attestation Statements Part 2.911 d 5 i request for FCC ID: QTG-ZKPIB13 ZAGG Inc. the applicant certifies that the equipment for which authorization is sought is not... lang:en score:65 filesize: 416.97 K page_count: 2 document date: 2024-09-02
	[pdf] Accessories tom Model Difference ZAGG Inc ZKPIB13 Pro Keys 2 QTG QTGZKPIB13 zkpib13 2024/9/2 ZAGG Inc. Model Difference EUT NAME: Pro Keys 2 Trademark: ZAGG MODEL : ZKBP129PK2B34, ZKBA129PK2B34 FCC ID: QTG-ZKPIB13 In addition to the product name and the shape of the accessory shell is different, everything else is the same. Sincerely ZKBP129PK2B34 ZKBA129PK2B34 Client s signat... lang:en score:63 filesize: 235.79 K page_count: 2 document date: 2024-09-02
	[pdf] Agent Authorization Date bctcemc005 Agent Authorization ZAGG Inc ZKPIB13 Pro Keys 2 QTG QTGZKPIB13 zkpib13 ZAGG Inc. 2024.9.2 Eurofins Electrical and Electronic Testing NA, Inc. 914 W. Patapsco Avenue Baltimore, MD 21230 USA RE: LETTER OF AGENT AUTHORIZATION EUT NAME: Pro Keys 2 Trademark: ZAGG MODEL : ZKBP129PK2B34, ZKBA129PK2B34 FCC ID: QTG-ZKPIB13 To Whom It May Concern: We, the undersigned, hereby au... lang:en score:62 filesize: 141.83 K page_count: 1 document date: 2024-09-02
	[pdf] Confidentiality Request Letter Please produce a letter on your company letterhead with the following information bctcemc005 Long term Confidentiality Letter ZAGG Inc ZKPIB13 Pro Keys 2 QTG QTGZKPIB13 zkpib13 ZAGG Inc. 2024.09.02 Eurofins Electrical and Electronic Testing NA, Inc. 914 W. Patapsco Avenue Baltimore, MD 21230 USA RE: CONFIDENTIALITY REQUEST FOR EUT NAME: Pro Keys 2 Trademark: ZAGG MODEL : ZKBP129PK2B34, ZKBA129PK2B34 FCC ID: QTG-ZKPIB13 To Whom It May Concern: This letter serves as an offic... lang:en score:59 filesize: 141.67 K page_count: 1 document date: 2024-09-02
	[pdf] SAR Rating Maximum Permissible Exposure Administrator RF Info ZAGG Inc ZKPIB13 Pro Keys 2 QTG QTGZKPIB13 zkpib13 FCC ID: QTG-ZKPIB13 RF exposure evaluation 2.1093 Radiofrequency radiation exposure evaluation: Portable Devices. According to15.247 i and1.1307b 1 , systems operating under the provisions of this section shall be operated in a manner that ensures that the public is not exposed to radio frequency ... lang:en score:52 filesize: 228.44 K page_count: 1 document date: 2024-09-02
	[pdf] CANADIAN REPRESENTATIVE LETTER OF ATTESTATION Admin US agent ZAGG Inc ZKPIB13 Pro Keys 2 QTG QTGZKPIB13 zkpib13 Attestation Statements 2024.8.28 TO: Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046, USA RE: Attestation Statements Part 2.911 d 7 request for FCC ID:QTG-ZKPIB13 ZAGG Inc. , the undersigned, hereby authorize ZAGG Inc. to act ... lang:en score:42 filesize: 525.46 K page_count: 1 document date: 2024-09-02
	[pdf] User Manual Quick Start Guide 314 01285 RevB Pro Keys 2 QSG 4Lang OL Users Manual ZAGG Inc ZKPIB13 QTG QTGZKPIB13 zkpib13 NN NN NN ... lang:en score:27 filesize: 3.32 M page_count: 1 document date: 2024-08-20
	[pdf] Test Report ANT Test Report ZAGG Inc ZKPIB13 Pro Keys 2 QTG QTGZKPIB13 zkpib13 Company: ITON Technology Corp. Address: 1302, Block A, Building 4, Tian an Digital City, Longgang District, Shenzhen. ... lang:en score:22 filesize: 2.43 M page_count: 3 document date: 2024-08-12
	[pdf] Test Report Jade Test Report ZAGG Inc ZKPIB13 Pro Keys 2 QTG QTGZKPIB13 zkpib13 ... lang:en score:22 filesize: 3.35 M page_count: 46 document date: 2024-09-02
	[pdf] Product Photos Jade Test Setup Photos ZAGG Inc ZKPIB13 Pro Keys 2 QTG QTGZKPIB13 zkpib13 16. EUT Test Setup Photographs Conducted Emissions Photo Report No.: BCTC2408666462E Radiated Measurement Photos No.BCTC/RF-EMC-005 Page: 44 of 46 EditionB.2 Report No.: BCTC2408666462E No.BCTC/RF-EMC-005 Page: 45 of 46 EditionB.2 ... lang:en score:21 filesize: 1.09 M page_count: 2 document date: 2024-09-02
	[pdf] Product Photos leon chen External Photos ZAGG Inc ZKPIB13 Pro Keys 2 QTG QTGZKPIB13 zkpib13 External Photos ... lang:en score:21 filesize: 1.02 M page_count: 6 document date: 2024-09-02
	[pdf] Product Photos Teardown leon chen Internal Photos ZAGG Inc ZKPIB13 Pro Keys 2 QTG QTGZKPIB13 zkpib13 Internal Photos Antenna ... lang:en score:21 filesize: 1.01 M page_count: 4 document date: 2024-09-02
	[pdf] Label Admin ID Label Location Info ZAGG Inc ZKPIB13 Pro Keys 2 QTG QTGZKPIB13 zkpib13 Label location Size:220*20mm ... lang:en score:21 filesize: 112.5 K page_count: 1 document date: 2024-09-02