hp Thin Pro PC Converter User Guide

HP Thin Pro PC Converter Quick Start Guide

Introduction to HP ThinPro PC Converter

Welcome to HP ThinPro PC Converter Quick Start Guide! This guide is intended for IT Administrators who are looking to easily convert any PC into a HP Thin Client. The guide includes step-by-step instructions to how to download, install, and use the software.

What is HP ThinPro PC Converter?

HP ThinPro PC Converter lets you extend PC life, enhance security, and simplify device management by transforming your existing IT assets into efficient VDI endpoint devices.

HP ThinPro PC Converter Software Components

Your purchase of HP ThinPro PC Converter provides you with access to three software components:

Minimum Hardware Requirements

Before you get started, please verify that your target PCs meet the below minimum hardware requirements. There is also a built-in compatibility check during installation.

PC Requirements -
            Architecture x86 64-bit compatible hardware
            Processor Intel® or AMD processors
           Memory (RAM) 2GB+ Note: For devices with shared video memory, a maximum of 1GB will be used for video memory.
            Storage 2GB+
            Graphics Intel®, AIT/AMD and NVIDIA® Note: If video card isn’t recognized, VESA driver with limited performance will be used.
            Networking Wired or Wireless Device
            USB Port USB (Type A) 2.0, 3.0, OR 3.1 Note: It is highly recommended to use USB 3.0 or higher for best performance.
USB Flash Drive Requirements -
            Classification USB (Type A) 2.0, 3.0, OR 3.1 Note: It is highly recommended to use USB 3.0 or higher for best performance.
           Min Storage Capacity 16 GB
Note: You should always back up all important data (such as personal files, photos, videos, documents, applications, software) on y our PC before beginning the converter process to avoid any possibility of losing your data. See https://support.microsoft.com/enus/help/971759/how-to-back-up-or-transfer-your-data-on-a-windows-based-computer for more information.

Download HP ThinPro PC Converter

Upon successful purchase of HP ThinPro PC Converter, you will receive an email from HP with links to download the software from the HP website. A sample of the email is shown below. If you cannot find the email in your main inbox, please make sure to check your Junk and Deleted folders. Follow the instructions in the email, register yourself on HP website, and download the software. There are three components you will be required to download to proceed further with installation: Electronic Delivery Receipt

Note: If you have not purchased the software and would like to test it, please use the 60-day trial download link on the HP Thin Client website to access your free 60-day trial to the software. The installation instructions remain the same for trial version as well.

Install HP ThinPro PC Converter

In this section, we will cover the step-by-step instructions on how to create an installer USB drive with HP ThinPro OS and deploy it on any target PC, there by converting the PC into a thin client.

Installing HP ThinPro PC Converter Deployment Tool

The below tool installation steps need to be executed on a Windows PC with admin privileges and is usually not the target PC that is required to be converted into a thin client.

  1. Double click on the .msi Windows Installer package that you downloaded earlier from HP website. Note:
    • The installer package can be installed on to a Microsoft Windows PC running Microsoft Windows 7 or later versions
    • The deployment tool is a 32-bit application that may be run on either 32- or 64-bit Microsoft Windows systems.
    • Requires Microsoft .NET 4.5
  2. The installation wizard will open. Click Next to continue HP Installation Wizard
  3. Click Install to continue Click Install
  4. A progress window will appear. It will take few seconds for the tool to install. When the install is complete, click finish to close the installer and launch the HP ThinPro PC Converter deployment tool. Click Finish
  5. If the deployment tool does not launch on its own, it can be found under start menu -> All Programs. Navigate to the HP ThinPro PC Converter Deployment Tool and double-click to open it.

Creating Installer USB drive with HP ThinPro

  1. Connect a USB drive to your Windows PC that has the deployment tool installed
  2. Open the deployment tool
  3. Browse and select the license & maintenance files you downloaded with your software from HP website. Click Next. Note: You can select both the files at a time or one after the other. Both files are required to proceed further with the installation. Deployment Tool
  4. Select Installer USB Flash Drive and click Next
  5. When you are using the tool for the first time, click on the Download button to download HP ThinPro OS from the HP website. It will take few minutes to download the image. Click Create. Note: If you have already downloaded the OS earlier, you can use Browse to select the image that is on your hard drive. If you connected multiple USB drives to your PC, select the USB flash drive that you want to create the image on. Create an Installer
  6. Please note that this tool erases all the data that is already on the USB drive. Make sure to backup any important files. Click Format. Click Format
  7. A progress screen will appear and when the deployment tool is finished installing, you will see the screen below. Click Exit. Note: If you want to create more than one USB drive, click on Create Another USB drive Installation Status Installation Complete

Installing HP ThinPro from the USB drive

The following setup instructions will need to be executed on the PC that you would like to convert into a thin client. You should always back up all important data (such as personal files, photos, videos, documents, applications, software) on your PC before beginning the converter process to avoid any possibility of losing your data. See https://support.microsoft.com/en-us/help/971759/how-to-back-up-or-transfer-your-data-on-a-windows-based-computer for more information.

  1. Insert the HP ThinPro USB drive into your computer's USB port, power-on the PC, and configure to boot from the USB drive.
    • To configure to boot from the USB drive, repeatedly press the relevant function key at the top of your device's keyboard until you enter the boot menu:
      1. HP: F9, F12, ESC
      2. Dell: F8, F12
      3. Lenovo: F11, F12 Tip: If you are unsure of which key to press, perform a Google search for the computer type plus "enter boot menu". For example: "HP Envy enter boot menu"
    • Once in the boot menu, use the arrow keys on your device's keyboard to select the USB flash drive, then press enter. Your device will now begin the boot process from the HP ThinPro USB flash drive. Upon a successful boot from the USB drive, you will be presented with the below setup wizard to configure the HP ThinPro operating system.
  2. Upon a successful boot from the USB drive, you will be presented with the below setup screen to configure HP ThinPro OS. Set your language. Click Next. HP Setup Screen
  3. Set your keyboard layout and click Next. Set Keyboard Layout
  4. Set the network connections and click Next. Set Network Connection
  5. Set your time zone and click Next. Set Time Zone
  6. After completing setup, the compatibility check shown below will occur and warn you about any hardware compatibility issues. You may choose between replacing your existing operating system with ThinPro or running ThinPro from the USB flash drive by clicking Install ThinPro to Disk or Continue from Removable Media, respectively. Note: HP recommends does NOT recommend Installing ThinPro to the Disk if a component is NOT supported. Click Install or Continue
  7. Congratulations! Your PC is now converted into a HP ThinPro thin client. Your PC is now converted

Further information on HP ThinPro

For further information on how to navigate HP ThinPro desktop, access administrative apps, setup Citrix®/VMware® connections, please refer to the HP ThinPro Administrator Guide.

Other deployment methods

In addition to the one-to-one deployment method using a USB drive, HP ThinPro PC Converter provides you with the flexibility to choose from any of the ways listed below to deploy HP ThinPro on your PCs:

  1. Create a bootable flash drive that lets you boot the PC into HP ThinPro OS without replacing the host OS. This is a good way to either test your PCs for compatibility or to support BYOD employees
  2. Create a mass deployment image that lets you use your existing management tool to deploy the HP ThinPro on a fleet of PCs at any given time

Creating Bootable USB drive with HP ThinPro

On the deployment tool, on the below screen, select Bootable USB Flash Drive. This creates an image on the USB drive that you can temporarily boot into on any target PC. This method of deployment allows you to access your organization's virtualized applications securely through HP ThinPro, but lets you retain your personal data, files, and operating system for your other needs. Creating Bootable USB drive

Creating Mass Deployment Installer image

Follow the same steps as outlined for creating the Installer USB drive, but on the screen shown below, select Mass Deployment Installer. This image can be saved to your hard drive and can be used with any of your existing PC image deployment and management tools (Ex: Microsoft SCCM, Landesk) to deploy the image on the fleet of PCs that you want to convert to thin clients. Creating Mass Deployment Installer image Note: Please note that once you deploy HP ThinPro on your target PCs, you may need to use HP Device Manager (included in the solution) to discover the devices and manage them.

HP Device Manager

HP Device Manager is a value-add software tool included with your purchase of HP ThinPro PC Converter to easily manage and maintain your thin clients from a centralized location. Note: By default, HPDM agent is included on your HP ThinPro image. Follow the below instructions to download and install HPDM on your IT administrator PC to manage the thin clients.

Downloading HPDM

Follow this link to download the HPDM 5.0 software from HP website.

Installing HPDM

Follow this link for step-by-step HPDM installation instructions.

Further Information

For further information, please refer to the HP Device Manager Administrator Guide or visit ftp://ftp.hp.com/pub/hpdm to find the latest HPDM software, white papers, and release notes. ©Copyright 2021 HP Development Company, L.P. The information contained herein is subject to change without notice, Citrix® is a trademark of Citrix Systems, Inc. and/or one or more of its subsidiaries, and may be registered in the United States Patent and Trademark Office and in other countries. VMware is a registered trademark or trademark of VMware, Inc. and its subsidiaries in the United States and other jurisdictions.

Documents / Resources

hp Thin Pro PC Converter [pdf] User Guide
Thin Pro PC Converter

References


tags: HP, Thin Pro PC Converter,

Search Any Device: