Commercial Electric 1001799061 5 Light LED Puck Light Kit User Guide
Commercial Electric 1001799061 5 Light LED Puck Light Kit
THANK YOU We appreciate the trust and confidence you have placed in Commercial Electric through the purchase of this LED puck light kit. We strive to continually create quality products designed to enhance your home. Visit us online to see our full line of products available for your home improvement needs. Thank you for choosing Commercial Electric!
Safety Information
- Read all instructions carefully before you begin this installation.
- This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC Rules and ICES-005 of the IC Rules. These limits are designed to provide reasonable installation protection. This equipment generates and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference.
- There is no guarantee that interference will not occur in a particular installation, if this equipment does cause harmful interference to radio and television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: a) Reorient or relocate the receiving antenna, b) Increase the separation between the equipment and the receiver, c) Connect the equipment into a different outlet and circuit from the receiver outlet and circuit, d) Consult the dealer or an experienced radionv technician for help.
- Change or modification to this unit not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
- Rated at 120V/60Hz, 3.43W x 5, Max 3.43W x 30.
- Linkable, add up to 30 units.
- The product is dimmable and can be used with a dimmer switch. See compatible dimmer list this manual.
- Suitable for recess mounting only inside a cabinet.
- Suitable for surface mounting only inside a cabinet.
- Compatible with Direct Wire Junction Box (SKU1006126385), sold separately.
Warranty
LIMITED WARRANTY The manufacturer warrants this product to be free from defects in materials and workmanship for a period of five (5) years from date of purchase. This warranty applies only to the original consumer purchaser and only to products used in normal use and service. If this product is found to be defective, the manufacturer's only obligation, and your exclusive remedy, is the repair or replacement of the product at the manufacturer's discretion, provided that the product has not been damaged through misuse, abuse, accident, modifications, alterations, neglect or mishandling. This warranty shall not apply to any product that is found to have been improperly installed, set-up, or used in any way not in accordance with the instructions supplied with the product. This warranty shall not apply to a failure of the product as a result of an accident, misuse, abuse, negligence, alteration, or faulty installation, or any other failure not relating to faulty material workmanship. The manufacturer specifically disclaims any liability and shall not be liable for any consequential or incidental loss or damage, including labor/expense costs involved in the replacement or repair of said product. Contact the Customer Service Team at 1-877-527-0313 or visit HOMEDEPOT.COM.
Pre-installation
PLANNING INSTALLATION Read all instructions completely before you begin installation. TOOLS REQUIRED HARDWARE INCLUDED NOTE: Hardware not shown to actual size.
Part | Description | Quantity |
AA | Mounting screw | 14 |
BB | Fastener | 20 |
PACKAGE CONTENTS
Part | Description | Quantity |
A | LED puck assembly | 5 |
B | Trim ring (preassembled to LED lights A) | 5 |
C | End cap (preassembled to LED lights A) | 5 |
D | Power cord |
- DVWCL-153PH-WH / 530826
- CTCL-153PDH-WH /267858
- TGCL-153PH-WH / 527401
- R12-06672-1LW / 1000024040
Installation - Surface Mounting
Removing the end cap Use a flathead screwdriver to remove the end cap (C). Installing the trim rings
- Attach the trim ring (B) to the desired surface, mark the screw location. Make sure the direction of outlet hole meets your requirement.
- Pre-drill holes in the mounting surface with a 1/16 in (1.5mm) drill to make installing screws easier.
- Install the trim ring (B) to the underside of the cabinet by inserting two mounting screws (AA) into the mounting holes on the bottom of each trim ring (B).
- Take the cord from the LED puck assembly (A) and feed the cord through the outlet hole of the trim ring (B).
- Push the LED puck assembly (A) into the trim ring (B) while pulling the cord tight.
- Use nail-on fasteners (BB) to attach the wire on the cabinet.
- Re-attach the end cap (C) on the last LED puck assembly (A).
Installation - Recessed Mounting
Preparing the lights for the first time
- Repeat steps 1 through 2 in the Surface Mounting installation section of this document.
- Drill a 2.95 in. round hole into the installation area.
- Thread the wire from the LED puck assembly (A) through the hole and insert the fixture into the hole. Repeat steps 1 through 2 in the Surface Mounting section for the remaining four LED assemblies (A).
- Connect the LED puck assemblies (A) with each other and connect the power cord (D) as described in step 6 in the surface mounting installation section.
Direct Wire Installation (optional)
Convert to Direct Wire: Directly wire this fixture to a wall switch using Direct Wire junction Box (SKU1006126385), Sold separately. Installing the quick connector plug (optional)
- The fixture wire (1) can be cut to the desired length if necessary. This help to minimize the amount of wire underneath the cabinets.
- Remove the plug cover (2) from the plug (3).
- Press the fixture wire (1), with grooved side (4) to the right (neutral side) down and into the front of the plug (3).
- Press the fixture wire (1) down onto the metal prongs.
- Slide the plug cover (2) back onto the plug over the fixture wire(1).
Luminous Intensity Distribution
Documents / Resources
Commercial Electric 1001799061 5 Light LED Puck Light Kit [pdf] User Guide 1001799061, 5 Light LED Puck Light Kit |