ANKER PowerConf S3 User Manual
ANKER Power Conf S3 User Manual
Anker Power Conf S3 User Manual
At a Glance
1 | Multi-function button | 8 | Power button |
2 | Volume down button | 9 | Bluetooth button |
3 | Mute button | 10 | Bluetooth LED |
4 | Phone call button | 11 | USB port (Type-A) for charge-out |
5 | Volume up button | 12 | Audio output port |
6 | Status LED | 13 | USB port (Type-C) for charge-in |
7 | Power LED |
Connecting
a) Connect to your PC by using a USB-C cable b) Connect to your PC or mobile device via Bluetooth pairing When powered on for the first time, PowerConf S3 will automatically enter the Bluetooth pairing mode.
Press | Enter pairing mode | |
Flashes blue | Bluetooth pairing | |
Steady blue | Bluetooth connected |
- Each time you power on PowerConf S3, it will automatically connect with the last successfully connected device if available.
- To disconnect Bluetooth, press the Bluetooth button again.
Powering On/Off
Press and hold the power button for 2 seconds to power on. The status LED will light on clockwise and then fade out. To power off, press and hold the power button for 2 seconds.
- PowerConf S3 will automatically power on once connected to your PC.
- PowerConf S3 will automatically power off after 30 minutes of inactivity or no source.
Button Controls
Press or press and hold | Volume up/down | |
Press | Answer/End a call | |
Press and hold for 2 seconds | Reject a call | |
Press | Mute or restore the microphone | |
Press | Play/Pause music |
Status LED
Lights up white for 2 seconds | Connected to power or PC |
Breathes green | Coming call |
Partially lights up blue | Sound direction detected |
Lights up blue clockwise or counterclockwise | Increase/Decrease volume |
Turns red | Muted |
Lights up green | Press Power button to check the battery level |
- Charging a) Charging PowerConf S3 b) Charging an external device • When powered off or being charged, PowerConf S3 won’t charge out. • When the remaining battery is less than 30%, the charge out current will be 5V 1A; if less than 10%, PowerConf S3 won’t charge out.
Audio Output
Connect an external speaker to the AUX OUT port of PowerConf S3 by using an AUX cable (not provided). The audio will be played through the speaker.
Soundcore App
Download the Soundcore App for software updates.
Specifications
Specifications are subject to change without notice.
Charge input | 5V 2A |
Charge out | 5V 2.1A |
Rated output power | 3W RMS |
Battery capacity | 6700 mAh |
Charging time | 4 hours |
Talktime | 24 hours |
Driver size | 1 x 1.75” (full range) |
Frequency response | 20 Hz - 20 kHz |
Bluetooth version | V 5.0 |
Bluetooth range | 10 m / 33 ft |
FAQS
Is this a stereo speaker to also play music?
You can play music through it but it’s really geared more toward voice and vocal range so doesn’t have the bass of speakers designed for music.
It rings on both and if you pick up on the phone the speaker doesn’t activate.
Yes
No, Bluetooth is only capable of a single connection. However, the microphone capabilities of this device should be sufficient for a large conference room. But, it has limits, just like any other device. If you have a very large conference room, then you should get a device that is capable of adding multiple microphone inputs. You will not find those at cheap prices though.
The PowerConf S3 is not an upgraded version. The functionalities of these two models are the same.
No, it’s a local mute
It does not come with a clip.
yes
The PowerConf S3 will come with a speakerphone, a USB A to USB C cable, a travel case, and a manual.
The usb-C is on the device itself. The other end plugs into a regular USB port and it is also Bluetooth
Not sure, but it easily connects via Bluetooth to iPhones, Android phones and laptops
If the light by the power button is red then the battery is charging. If it's white then it's charged and the power is on.
Yes, it is compatible with Zoom.
Yes, you can use voice dialing through the Bluetooth connection.
Yes, you can use hands-free calling through the Bluetooth connection.
It is aux out so you should be able to feed to a recorder
The back of the Anker Power Conf S3 states it was made in China.
VIDEO
Documents / Resources
ANKER PowerConf S3 [pdf] User Manual PowerConf S3 |