technicolor OWA3111 Wi-Fi Extenders User Guide

technicolor OWA3111 Wi-Fi Extenders

technicolor- OWA3111- Wi-Fi Extenders-product-image

Before you start

Carefully read the Safety Instructions and Regulatory Notices document included in your package before continuing with the installation of your OWA3111.
Do not make any connections until instructed to do so!

Check the content of your box

Your package contains the following items: technicolor- OWA3111- Wi-Fi Extenders-01

Item	Description
A	One OWA3111.
B	User Documentation (this Quick Setup Guide, Safety Instructions & Regulatory Notices). Other additional documents may be included.
C	One power supply adapter.
D	One Ethernet cable with yellow connectors.

About the OWA3111

Wi‑Fi

Wi‑Fi general The OWA3111 is equipped with:

Two 5 GHz Wi-Fi 6 (IEEE802.11ax) interfaces that provide superior transfer rates and are less sensitive to interference.
One 2.4 GHz Wi-Fi 6 (IEEE802.11ax) interface which allows you to connect Wi-Fi devices that don’t support 5 GHz Wi-Fi.

Wi‑Fi 6 Enabled with the latest Wi-Fi 6 technology, the OWA3111 offers ultimate wireless networking by improving latency, providing faster throughputs, better performance and optimal link stability in your local network. EasyMesh The OWA3111 supports EasyMesh (as EasyMesh agent) that allows you to bring an ultimate in-home Wi-Fi experience by creating a unified intelligent Wi-Fi environment throughout your home using multiple EasyMesh-enabled access points.

Top panel

technicolor- OWA3111- Wi-Fi Extenders-02 WPS button and Status LED (item A) The WPS button with integrated Status LED on the top panel of your OWA3111 is used to pair the OWA3111 with other Wi-Fi devices and informs you about the status of your OWA3111. If the Status LED of your OWA3111 is flashing green, your OWA3111 is updating its software. In this case, wait until the LED becomes slowly blinking yellow, or solid green, yellow or red. This can take several minutes! Do not power off your gateway or unplug any cables!

Back panel and bottom product label

technicolor- OWA3111- Wi-Fi Extenders-03 Reset button (item A) When the OWA3111 is powered on and you press the Reset you can restart or reset it. For more information, see “5.8. How to repair an unresponsive Wi-Fi extender” on page 13. Power button (item B) The power button allows you to power the OWA3111 on or off. Power port (item C) The power port allows you to connect the power supply. Warning: Only use the power supply delivered with your OWA3111. USB port (item D) ‑ optional The USB port (optional) is reserved for future use. Ethernet LAN port (item E) The Ethernet LAN port allows you to connect an Ethernet device (for example a set-top box, a NAS drive). Ethernet WAN/LAN port (item F) The Ethernet WAN port allows you to connect your OWA3111 to the Internet gateway. If free, you can also use it as a second Ethernet LAN port. Product label (bottom of your product) The product label contains:

The default network name and wireless key of the OWA3111.
The access key to configure the OWA3111 via its GUI.

Set up

The OWA3111 can be used:

As a wired Wi-Fi 6 home network enabler. You will use this scenario in case your Internet gateway and/or home network has no Wi-Fi, or Wi-Fi capabilities without Wi-Fi 6. For this scenario, see “4.1. Wired Wi-Fi 6 home network enabler” on page 5.
As a wireless Wi-Fi 6 home network enabler. You will use this scenario in case your Internet gateway and/or home network has Wi-Fi, but no Wi-Fi 6 and/or EasyMesh. For this scenario, see “4.2. Wireless Wi-Fi 6 home network enabler” on page 6.
As an EasyMesh home network extender. You will use this scenario in case you want to extend your existing EasyMesh Wi-Fi home network with additional coverage using the OWA3111. In such environment your Internet gateway or another Wi-Fi device is already operating as the Wi-Fi EasyMesh controller. For this scenario, see “4.3. EasyMesh home network extender” on page 7.

To join an existing EasyMesh home network, you must first enable EasyMesh on your OWA3111 via its GUI. For more information, see “5.7. Configure your Wi-Fi extender to your needs” on page 11.

Wired Wi‑Fi 6 home network enabler

This scenario allows you to add Wi-Fi 6 coverage using the OWA3111. technicolor- OWA3111- Wi-Fi Extenders-04

Internet gateway
OWA3111 Wi-Fi 6 access point
Wi-Fi device

You will connect the OWA3111 to your Internet gateway either:

Directly using an Ethernet cable.
Indirectly via a powerline adapter or similar.

Step 1: Set up the Wi‑Fi extender

Take the included Ethernet cable (this is the cable with the yellow connectors). Connect one end of the Ethernet cable to the blue Ethernet WAN port on the back of your OWA3111. Connect the other end of the Ethernet cable to an Ethernet or LAN port of your Internet gateway.
Take the power supply, plug the small end into the power inlet port of the OWA3111 and then plug the other end into a nearby power outlet.
Press the power button on the back of the OWA3111. The Status LED will first be solid yellow during startup, then turn solid green. If this is not the case, check the connections you made.
Wait until the Status LED turns solid green before connecting your Wi‑Fi devices.

Step 2: Connect your Wi‑Fi devices If your Wi‑Fi device:

Supports WPS, use WPS to pair it with the OWA3111. For more information, see “5.4. Pairing Wi‑Fi devices to your OWA3111” on page 10.
Does not support WPS, configure it with the Wi‑Fi network name (SSID) and wireless key that are printed on the product label on the bottom of the OWA3111. For more information, consult the user documentation of your device.

Step 3: Connect an Ethernet device (optional) You can use the OWA3111’s yellow Ethernet LAN port to connect an Ethernet device (for example, a Set-Top Box, a NAS drive or computer) to your home network.

Wireless Wi‑Fi 6 home network enabler

This scenario allows you to add (extra) Wi‑Fi 6 coverage using the OWA3111. technicolor- OWA3111- Wi-Fi Extenders-04

Internet gateway or Wi-Fi extender
OWA3111 Wi-Fi 6 access point
Wi-Fi device

Step 1: Set up the Wi-Fi extender

Position your OWA3111 half-way between your Internet gateway (or extender) and your Wi‑Fi devices.
Take the power supply, plug the small end into the power inlet port of the OWA3111 and then plug the other end into a nearby power outlet.
Press the power button on the back of the OWA3111. The Status LED will first be solid yellow during startup.
Wait until the Status LED slowly blinks yellow.
Pair the OWA3111 with your Internet gateway (or extender) using WPS. For detailed instructions, see “5.2. Pairing the OWA3111 with your Internet gateway” on page 8.
Check the link quality via the Status LED on the OWA3111. If it is:
- Solid green, then link quality is optimal.
- Solid yellow, then link quality is fair, but not optimal.
- Solid red, then link quality is bad. It is advised to reposition your OWA3111. See “5.6. Optimizing the link quality” on page 10 for more information.

Step 2: Connect your Wi‑Fi devices If your Wi‑Fi device:

Supports WPS, use WPS to pair it with the OWA3111. For more information, see “5.4. Pairing Wi‑Fi devices to your OWA3111” on page 10.
Does not support WPS, configure it with the Wi‑Fi network name (SSID) and wireless key that are printed on the product label on the bottom of the OWA3111. For more information, consult the user documentation of your device.

Step 3: Connect an Ethernet device (optional) You can use both of the OWA3111’s Ethernet ports to connect Ethernet devices (for example, a Set-Top Box, a NAS drive or computer) to your home network.

EasyMesh home network extender

This scenario allows you to extend Wi‑Fi coverage in your home by retransmitting Wi‑Fi messages from your existing Wi‑Fi EasyMesh network.

OWA3111EasyMesh agent
Internet gateway or OWA3111 as EasyMesh controller
Wi-Fi device

Requirements Your Internet gateway or another EasyMesh-capable Wi-Fi device must be enabled and configured as the EasyMesh controller. Step 1: Set up the repeater and onboard to the EasyMesh network

Position your OWA3111 half-way between your Internet gateway (or extender) and your Wi‑Fi devices.
Take the power supply, plug the small end into the power inlet port of the OWA3111 and then plug the other end into a nearby power outlet.
Press the power button on the back of the OWA3111. The Status LED will first be solid yellow during startup.
Wait until the Status LED slowly blinks yellow.
Enable EasyMesh on your OWA3111 if not done yet. For more information ,see “5.7. Configure your Wi-Fi extender to your needs” on page 11.
Onboard the OWA3111 to the EasyMesh network using WPS. For detailed instructions, see “5.3. Joining your OWA3111 with an existing EasyMesh network” on page 9.
Check the link quality via the Status LEDon the OWA3111. If it is:
- Solid green, then link quality is optimal.
- Solid yellow, then link quality is fair, but not optimal.
- Solid red, then link quality is bad. It is advised to reposition your OWA3111. See “5.6. Optimizing the link quality” on page 10 for more information.

Step 2: Connect your Wi‑Fi devices Because the OWA3111 now uses the same Wi‑Fi settings as the EasyMesh home network, Wi‑Fi devices that were already connected to your home network will also be able to connect to the OWA3111, and vice versa. Step 3: Connect your Ethernet devices (optional) You can use both of the OWA3111’s Ethernet ports to connect Ethernet devices (for example, a Set-Top Box, a NAS drive or computer) to your home network.

Tips and tricks

Making a wired connection between the OWA3111 and your Internet gateway

Take the included Ethernet cable (this is the cable with the yellow connectors).
Connect one end of the Ethernet cable to the blue Ethernet WAN port on the back of your OWA3111.
Connect the other end of the Ethernet cable to an Ethernet or LAN port of your Internet gateway.

Pairing the OWA3111 with your Internet gateway

Requirements Make sure your OWA3111 isn’t onboarded already to an existing EasyMesh home network, or paired with another Internet gateway. Procedure

Briefly press the WPS button on the OWA3111. The Status LED on the OWA3111 starts blinking green.
Within two minutes, briefly press the WPS button on your Internet gateway (or a Wi-Fi extender connected to it). Note: On some Internet gateways you may have to press and hold the WPS button for a few seconds or until its WPS LED starts blinking.
After some time the Status LED on the OWA3111 turns solid green, yellow or red. The Wi‑Fi connection is now successfully established. Note: If the Status LED is blinking blinking red, go to “5.5. What to do when the Status LED is blinking red?” on page 10 for further instructions.
Check the link quality via the Status LED on the OWA3111. If it is:
- Solid green, then link quality is optimal.
- Solid yellow, then link quality is fair, but not optimal.
- Solid red, then link quality is bad. It is advised to reposition your OWA3111. See “5.6. Optimizing the link quality” on page 10 for more information

Joining your OWA3111 with an existing EasyMesh network

Requirements Make sure your OWA3111 isn’t joined already to an existing EasyMesh home network. Procedure

Briefly press the WPS button on the OWA3111. The Status LED on the OWA3111 starts blinking green.
Within two minutes, briefly press the WPS button on your Internet gateway or any Wi-Fi extender in the EasyMesh home network. Note: On some Internet gateways you may have to press and hold the WPS button for a few seconds or until its WPS LED starts blinking.
During EasyMesh onboarding the Status LED on the OWA3111 goes through (one or more of) the following states:
- Flashing green & yellow (1 second each): EasyMesh onboarding started and ongoing.
- Flashing green (3 seconds) & yellow (1 seconds): EasyMesh network was found but upstream onboarding ongoing or failing.
- Flashing green (1 second) & yellow (3 seconds): No EasyMesh network was found. Once the the Wi‑Fi connection is successfully established it will turn solid green, yellow or red. Note: If the Status LED is blinking red, go to “5.5. What to do when the Status LED is blinking red?” on page 10 for further instructions.
Check the link quality via the Status LED on the OWA3111. If it is:
- Solid green, then link quality is optimal.
- Solid yellow, then link quality is fair, but not optimal.
- Solid red, then link quality is bad. It is advised to reposition your OWA3111. See “5.6. Optimizing the link quality” on page 10 for more information.

Pairing Wi‑Fi devices to your OWA3111

Connecting your Wi-Fi devices using WPS technicolor- OWA3111- Wi-Fi Extenders-07

Briefly press the WPS button on the OWA3111. The Status LED on the OWA3111 starts blinking green.
Within two minutes, start WPS on your Wi‑Fi device. If your Wi‑Fi device is:
- Another Wi-Fi extender, briefly press its WPS button.
- Another type of device, consult the documentation of your device.
After some time the Status LED on the OWA3111 turns back to its previous solid state (green, yellow or red). The Wi‑Fi connection is now successfully established. Note: If the Status LED is blinking red, go to “5.5. What to do when the Status LED is blinking red?” on page 10 for further instructions.

What to do when the Status LED is blinking red?

This indicates that the OWA3111 could not establish a Wi‑Fi connection through WPS. Do the following:

Wait until the red blinking LED goes out, then try using WPS again.
Turn your OWA3111 slightly and then try again.
Obstructions may deteriorate the signal strength. Try to minimize the number of walls between the two devices and then try again.
Move the devices closer to each other and then try again.

Optimizing the link quality

Tips To achieve optimal link quality:

Always try to reduce the number of obstacles (especially walls) between your Wi‑Fi devices to a minimum.
Do not place your Wi‑Fi devices in the neighbor hood of devices that cause interface (microwave ovens, cordless phones, baby monitors, etc.).
Use Wi‑Fi devices that support and use (multiple) 5 GHz Wi‑Fi.

Status LED If the OWA3111 has a Wi-Fi connection to an Internet gateway, extender or repeater (with or without EasyMesh), the Status LED will provide information about the quality of the link between them. If the Status LED is:

Solid green: then the link quality is No further actions are needed.
Solid yellow: then the link quality is fair, but not optimal. Change the position of the OWA3111 until the LED turns green.
Solid red: then the link quality is Change the position of the OWA3111 until out he LED turns green or at least orange.

Repositioning the OWA3111 for better link quality First try to improve the link quality without unplugging the power supply:

Reposition the OWA3111 to avoid obstacles, like walls, furniture and TV screens, between the OWA3111 and your access
Wait 15 seconds to allow the OWA3111 to re-evaluate the link If the link quality did not improve:
Unplug the power supply and move the OWA3111 closer to your access point, or to a place with less obstacles between the OWA3111 and your access
Plug in the power supply and wait two minutes to allow the OWA3111 to start up all services and evaluate the link quality.

Configure your Wi-Fi extender to your needs

Accessing the OWA3111 web interface The Wi-Fi extender web interface allows you to configure your Wi-Fi extender using your web browser. To access the Wi-Fi extender web user interface:

Check the IP address of your If your OWA3111:
- Is connected to your home network (either wired or via Wi-Fi), browse to the web interface of your gateway to check the IP address of the
- Not connected to your home network, the default IP address of the OWA3111 is 168.1.2.
Browse to the OWA3111’s IP address found (or http://192.168.1.2) on a computer or device that is currently connected to your Wi-Fi extender (either wired or over Wi-Fi).
The Wi-Fi extender web interface appears. By default, you are logged in as guest. This means that some items are hidden. To view all items, click Sign In and enter admin as user name and the ACCESS KEY printed on the label of your Wi-Fi extender as password. Note: If this is the first time that you sign in, the OWA3111 may offer you to change your password.
The Wi-Fi extender web interface appears with all settings available.

Configuring Easy Mesh To use EasyMesh you must first enable it on your OWA3111. To enable EasyMesh:

Browse to the Wi-Fi extender web user interface and login as the user admin (for more information, see “Accessing the OWA3111 web interface” on page 11).
To open the EasyMesh page, click the EasyMesh card header.
On the EasyMesh page, you can see whether EasyMesh is enabled on your Wi-Fi extender or not. If the switch is set to:
- Then the EasyMesh agent is enabled. Clicking the switch will disable EasyMesh on your Wi-Fi extender.
- Then the EasyMesh agent is disabled. Clicking the switch will enable your broadband interface.

How to repair an unresponsive Wi-Fi extender

If at some point your Wi-Fi extender becomes unresponsive you can:

Force it to restart: After restarting the OWA3111 will return to normal operation with its last known working condition and configuration.
Reset it to factory defaults: The OWA3111 restarts with the factory default configuration. None of the Wi-Fi and EasyMesh settings, nor other configuration changes you made to the OWA3111 are preserved.

Proceed as follows:

Make sure that your Wi-Fi extender is turned on.
Use a pen or an unfolded paperclip to push the recessed Reset button on your Wi-Fi extender:
- Shortly (less than 5 seconds) and then release it to force it to restart.
- For at least 10 seconds and then release it to rest it to factory defaults.
Your Wi-Fi extender restarts..

Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures:

Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.

FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

This device may not cause harmful interference, and
This device must accept any interference received, including interference that may cause undesired operation.

For product available in the USA market, only channel 1~11 can be operated. Selection of other channels is not possible. This device is restricted for indoor use. IMPORTANT NOTE: FCC Radiation Exposure Statement: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 30cm between the radiator & your body. Technicolor Delivery Technologies www.technicolor.com Copyright © 2020 Technicolor. All rights reserved. All tradenames referenced are service marks, trademarks, or registered trademarks of their respective companies. Specifications subject to change without notice.

Documents / Resources

technicolor OWA3111 Wi-Fi Extenders [pdf] User Guide
OWA3111, RSE-OWA3111, RSEOWA3111, OWA3111 Wi-Fi Extenders, Wi-Fi Extenders

References

Technicolor Home Page

Documents - technicolor – OWA3111,RSE-OWA3111,RSEOWA3111

	[pdf] 工事設計書 Bunny POA Letter Technicolor Delivery Technologies Belgium OWA3111 MESH Extender RSE RSEOWA3111 owa3111 Power of Attorney Date: 2021/04/07 Dear Sir, I hereby have entrusted the following person to be a ... Leohuang sporton.com.tw I am therefore responsible for the contents of the application. FCC ID: RSE-OWA3111 Sincerely, Applicant s company name : Technicolor Delivery Technologies Belgium Applicant... lang:en score:54 filesize: 102.16 K page_count: 1 document date: 2021-04-07
	[pdf] 工事設計書 Bunny POA Letter Technicolor Delivery Technologies Belgium OWA3111 MESH Extender RSE RSEOWA3111 owa3111 Technicolor Delivery Technologies Belgium Prins Boudewijnlaan 47 Edegem B-2650 Belgium Power of Att ... Leohuang sporton.com.tw I am therefore responsible for the contents of the application. FCC ID: RSE-OWA3111 Sincerely, Applicant s company name : Technicolor Delivery Technologies Belgium Applicant... lang:en score:54 filesize: 44.79 K page_count: 1 document date: 2020-08-21
	[pdf] 工事設計書 Bunny POA Letter Technicolor Delivery Technologies Belgium OWA3111 MESH Extender RSE RSEOWA3111 owa3111 Technicolor Delivery Technologies Belgium Prins Boudewijnlaan 47 Edegem B-2650 Belgium Power of Att ... Leohuang sporton.com.tw I am therefore responsible for the contents of the application. FCC ID: RSE-OWA3111 Sincerely, Applicant s company name : Technicolor Delivery Technologies Belgium Applicant... lang:en score:54 filesize: 44.79 K page_count: 1 document date: 2020-08-21
	[pdf] Decleration of Conformity 工事設計書 Bunny TPC Declaration Letter Technicolor Delivery Technologies Belgium OWA3111 MESH Extender RSE RSEOWA3111 owa3111 TPC Declaration Letter Date: 2021/04/07 FCC IDRSE-OWA3111 To Whom It May Concern: We, Technicolor Delivery Technologies Belgium, declare that the device supports the TPC function in final F/W when EUT is sold to FCC market. Regards, Sincerely yours, Applicant s company name : Technicolor Deliver... lang:nl score:38 filesize: 102.81 K page_count: 1 document date: 2021-04-07
	[pdf] Confidentiality Request Letter 工事設計書 Bunny Confidentiality Letter Technicolor Delivery Technologies Belgium OWA3111 MESH Extender RSE RSEOWA3111 owa3111 Confidential Letter Federal Communications Commission 7435 Oakland Mills Road Columbia MD 21046 Subject: Request for Confidentiality FCC IDRSE-OWA3111 To Whom It May Concern: Date: 2021/4/07 Long Term Confidentiality Pursuant to Sections 0.457 and 0.459 of the Commission s Rules, we hereby respec... lang:en score:38 filesize: 108.83 K page_count: 1 document date: 2021-04-07
	[pdf] Confidentiality Request Letter 工事設計書 Bunny Confidentiality Letter Technicolor Delivery Technologies Belgium OWA3111 MESH Extender RSE RSEOWA3111 owa3111 Technicolor Delivery Technologies Belgium Prins Boudewijnlaan 47 Edegem B-2650 Belgium Confidential Letter Federal Communications Commission 7435 Oakland Mills Road Columbia MD 21046 Subject: Request for Confidentiality FCC IDRSE-OWA3111 To Whom It May Concern: Date: 2020/8/20 Long Term Confide... lang:en score:37 filesize: 51.95 K page_count: 1 document date: 2020-08-21
	[pdf] OWA3111 DAFpARFrszg BAFQVjMqK1s Alixia Advanced Media Technologies Inc 1 goamt 2023 07 \|\|\| EAGLE X Ultimate Tri-Band Wi-Fi 6 Extender OWA3111 Technicolor s EAGLE X, a Tri-Band extender that integrates two Gigabit Ethernet ports, is equipped with the latest Wi-Fi 6 technology, allowing for faster throughputs, better performance in dense multi-user environments and improved battery lifetime... lang:en score:30 filesize: 283.73 K page_count: 3 document date: 2023-07-18
	[pdf] Decleration of Conformity Test Report Microsoft Word FA071024 FCC MPE Report doc Viola Technicolor Delivery Technologies Belgium OWA3111 MESH Extender RSE RSEOWA3111 owa3111 FCC RADIO EXPOSURE TEST REPORT Report No. : FA071024 Table of Contents History of this test repo ... el names in the following table are all refer to the identical product. Model Number Description OWA3111 GFEX310 For marketing reason the same product will be covered by different name. From the ... lang:en score:30 filesize: 256.14 K page_count: 8 document date: 2020-08-13
	[pdf] Decleration of Conformity Test Report Microsoft Word FA071024 FCC MPE Report doc Viola Technicolor Delivery Technologies Belgium OWA3111 MESH Extender RSE RSEOWA3111 owa3111 FCC RADIO EXPOSURE TEST REPORT Report No. : FA071024 Table of Contents History of this test repo ... el names in the following table are all refer to the identical product. Model Number Description OWA3111 GFEX310 For marketing reason the same product will be covered by different name. From the ... lang:en score:30 filesize: 256.14 K page_count: 8 document date: 2020-08-13
	[pdf] User Manual User Manual Technicolor Delivery Technologies Belgium OWA3111 MESH Extender RSE RSEOWA3111 owa3111 ... lang:en score:28 filesize: 4.04 M page_count: 16 document date: 2020-08-13
	[pdf] Accessories Test Report Viola Test Rpt 5G B1 B4 pt 1 Technicolor Delivery Technologies Belgium OWA3111 MESH Extender RSE RSEOWA3111 owa3111 FCC RADIO TEST REPORT Report No. : FR071024AB Table of Contents History of this test report...... ... ucted Output Power Product Type Nominal Channel Bandwidth Description MESH Extender Technicolor OWA3111, GFEX310 MESH Extender RSE-OWA3111 From power adapter Please see Section 1.10 Product ... lang:en score:27 filesize: 5.8 M page_count: 330 document date: 2020-08-13
	[pdf] Viola Test Rpt 2 4G Technicolor Delivery Technologies Belgium OWA3111 MESH Extender RSE RSEOWA3111 owa3111 ... lang:en score:20 filesize: 3.58 M page_count: 202 document date: 2020-08-13
	[pdf] Label Microsoft Word Label Location doc EmilyChen Info Technicolor Delivery Technologies Belgium OWA3111 MESH Extender RSE RSEOWA3111 owa3111 ... lang:en score:19 filesize: 40.58 K page_count: 1 document date: 2020-08-13
	[pdf] 工事設計書 Bunny Sporton Tsup Technicolor Delivery Technologies Belgium OWA3111 MESH Extender RSE RSEOWA3111 owa3111 ... lang:en score:19 filesize: 304.67 K page_count: 4 document date: 2020-08-13
	[pdf] Confidentiality Request Letter 工事設計書 Bunny Confidentiality Letter Technicolor Delivery Technologies Belgium OWA3111 MESH Extender RSE RSEOWA3111 owa3111 ... lang:en score:19 filesize: 52.38 K page_count: 1 document date: 2020-08-21
	[pdf] Test Report Viola Test Rpt 5G B1 B4 pt 2 Technicolor Delivery Technologies Belgium OWA3111 MESH Extender RSE RSEOWA3111 owa3111 FCC RADIO TEST REPORT Report No. : FR071024AB Band Edge and Fundamental Emissions 802.11ax 40MHz / Nss 1 MCS 0 / 1S4T CDD / Ant. 3 Ant. 4 Ant. 5 Operating Mode Polarization H Ant. 6 / CH151 Note 1: Frequencies within 5725-5850 are the fundamental frequencies at 5755MHz Note 2: Measureme... lang:en score:19 filesize: 807.39 K page_count: 77 document date: 2020-08-13
	[pdf] Decleration of Conformity Microsoft Word APPENDIX A TEST PHOTOS doc EmilyChen Tsup Technicolor Delivery Technologies Belgium OWA3111 MESH Extender RSE RSEOWA3111 owa3111 ... lang:en score:19 filesize: 142.23 K page_count: 2 document date: 2021-05-25
	[pdf] Decleration of Conformity Product Photos Microsoft Word PHOTOGRAPHS OF EUT EP071024 doc EmilyChen External Photos Technicolor Delivery Technologies Belgium OWA3111 MESH Extender RSE RSEOWA3111 owa3111 ... lang:en score:18 filesize: 499.69 K page_count: 6 document date: 2020-08-13
	[pdf] Decleration of Conformity Product Photos Teardown Microsoft Word PHOTOGRAPHS OF EUT EP071024 doc EmilyChen Internal Photos Technicolor Delivery Technologies Belgium OWA3111 MESH Extender RSE RSEOWA3111 owa3111 ... lang:en score:18 filesize: 2.52 M page_count: 27 document date: 2020-08-13
	[pdf] 工事設計書 Bunny C2PC Cover Letter Technicolor Delivery Technologies Belgium OWA3111 MESH Extender RSE RSEOWA3111 owa3111 ... lang:en score:18 filesize: 67.62 K page_count: 1 document date: 2021-05-24
	[pdf] Decleration of Conformity Microsoft Word FA071024 01 FCC MPE Report doc EmilyChen Technicolor Delivery Technologies Belgium OWA3111 MESH Extender RSE RSEOWA3111 owa3111 ... lang:en score:18 filesize: 256.72 K page_count: 10 document date: 2021-05-25
	[pdf] Decleration of Conformity Microsoft Word Appendix A Test Photos FZ071024 01 doc WendyPan Tsup DFS Technicolor Delivery Technologies Belgium OWA3111 MESH Extender RSE RSEOWA3111 owa3111 Report No.: FZ071024-01 Appendix A. Test Photos Sporton International Inc. Hsinchu Laboratory TEL : 886-3-656-9065 FAX : 886-3-656-9085 Page No. : A1 of A3 Report No.: FZ071024-01 1. Photographs of Dynamic Frequency Selection Test Configuration AP Mode FRONT VIEW CLOSE-UP VIEW Sporton Internat... lang:en score:18 filesize: 155.25 K page_count: 3 document date: 2021-03-22
	[pdf] Decleration of Conformity Test Report Microsoft Word FCC DFS test report FZ071024 01 doc EmilyChen Test Report Technicolor Delivery Technologies Belgium OWA3111 MESH Extender RSE RSEOWA3111 owa3111 ... lang:en score:18 filesize: 3.4 M page_count: 300 document date: 2021-05-25
	[pdf] Decleration of Conformity Microsoft Word FR071024 01 FCC RF Report 5G B2 B3 doc EmilyChen TR pt 3 Technicolor Delivery Technologies Belgium OWA3111 MESH Extender RSE RSEOWA3111 owa3111 ... lang:en score:17 filesize: 2.19 M page_count: 166 document date: 2021-05-25
	[pdf] Decleration of Conformity Microsoft Word FR071024 01 FCC RF Report 5G B2 B3 doc EmilyChen TR pt 2 Technicolor Delivery Technologies Belgium OWA3111 MESH Extender RSE RSEOWA3111 owa3111 ... lang:en score:17 filesize: 4.88 M page_count: 253 document date: 2021-05-25
	[pdf] Decleration of Conformity Microsoft Word FR071024 01 FCC RF Report 5G B2 B3 doc EmilyChen TR pt 1 Technicolor Delivery Technologies Belgium OWA3111 MESH Extender RSE RSEOWA3111 owa3111 ... lang:en score:17 filesize: 4.85 M page_count: 259 document date: 2021-05-25