ETI 504081020 8.5 Inch Round Twistfit Marine Bulkhead User Guide
ETI 504081020 8.5 Inch Round Twistfit Marine Bulkhead
PACKAGE CONTENTS
Part | Description | Quantity |
A | Fixture Body | 1 |
AA | Mounting Bracket | 1 |
BB | Mounting Screw (for Bracket) | 2 |
CC | Wire Connector | 2 |
INSTALLATION
- Remove the rubber plug and using a philips head screw driver access the color temperature setting switch cover. Choose color temperature (CCT) from three options: 2700k Warm White, 3000k Soft White, or 4000k Cool White. Install the color switch cover, then fix the screw with a philips head screw driver and replace rubber plug. NOTE: The factory setting for the correlated color temperature (CCT) is 2700K.
- Pass the hot and neutral (black and white) wires from the electrical outlet box through the middle hole of the mounting bracket (AA). Align the mounting bracket (AA) using the mounting screws (BB) and tighten securely to the electrical box.
- Connect the hot and neutral (black and white) wires from the fixture body (A) to the same color wires from the electrical box. Cover the wire connectors (CC) with electrical tape for a more secure connection. Position the wires back inside the electrical box.
- Align the side slots on the fixture body (A) with the mounting bracket (AA) and fix the fixture body (A) securely by carefully rotating in clockwise the side slots inside the mounting bracket (AA).
- Apply silicone sealant ( not included) between the fixture body (B) and the wall for additional protection against water and dust. Restore power at the electrical panel. Turn on the light switch to activate the fixture.
- Ensure the electricity to the wires you are working on is shut off. Either remove the fuse or turn off the circuit breaker.
- This product must be installed in accordance with the applicable installation codes by a person familiar with the construction and operation of the product and the hazards involved.
- Risk of electrical shock. To reduce the possibility of serious injury, always take the proper precautions and unplug the fixture before moving or cleaning.
Fcc
NOTICE: This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- This device must accept any interference received, including interference that may cause undesired operation.
- Reorient or relocate the receiving antenna,
- increase the separation between the equipment and the receiver,
- connect the equipment into an outlet on a circuit different from that to which the receiver is connected, and consult the dealer or an experienced radio/TV.
- Suitable for wet locations.
- Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
- Twist Fit products are not compatible with all the shallow pancake junction boxes. See website for Warranty, Troubleshooting or Care and Cleaning details at www.ETiSSL.com.
Documents / Resources
ETI 504081020 8.5 Inch Round Twistfit Marine Bulkhead [pdf] User Guide 504081020, 8.5 Inch Round Twistfit Marine Bulkhead, 504081020 8.5 Inch Round Twistfit Marine Bulkhead, Round Twistfit Marine Bulkhead, Twistfit Marine Bulkhead, Marine Bulkhead, Bulkhead |
References
Documents - eti – 504081020
[pdf]
Installation Guide Instructions Guide Catalog Label
8 5 in Round TwistFit Marine White LED Outdoor Bulkhead Light Frosted Glass Lens and Polycarbonate Base Installation Guide ETi 504081020 849489067445 0849489067445 1007687673 4e62d32c 2b76 496f a601 b8d2635f83b9 images thdstatic catalog Images 4e ||| Model # 504081020 Part # MBRD-8.5IN-8-3CP-MV-WT USE AND CARE GUIDE 8.5 ROUND TWISTFIT MARINE BULKHEAD WITH COLOR PREFERENCE PACKAGE CONTENTS Part Description A Fixture Body AA Mounting Bracket BB Mounting Screw for Bracket CC Wire Connector Quantity 1 1 2 2 A AA NOTE: Keep your receipt and t... lang:en score:38 filesize: 2.25 M page_count: 3 document date: 2021-08-26 | |
[pdf]
Specifications Catalog
8 5 in Round TwistFit Marine White LED Outdoor Bulkhead Light Frosted Glass Lens and Polycarbonate Base Specification ETi 504081020 849489067445 0849489067445 1007687673 723e31d0 cada 40c7 81b4 ef157dcc3923 images thdstatic catalog Images 72 ||| 8.5in Round TwistFit Marine Bulkhead with Color Preference MODEL# 504081020 917 LUMENS 6.9W 132.8LPW 3-CCT With our proprietary 8.5IN ROUND TWISTFIT MARINE BULKHEAD W/ COLOR PREFERENCE SUPERIOR VALUE PERFORMANCE WET LOCATION PRODUCT OVERVIEW ETi SSL s TwistFit Marine Bulkheads are versa... lang:en score:31 filesize: 1.16 M page_count: 2 document date: 2022-01-18 |
tags: 504081020, 504081020 8.5 Inch Round Twistfit Marine Bulkhead, 8.5 Inch Round Twistfit Marine Bulkhead, Bulkhead, eti, Marine Bulkhead, Round Twistfit Marine Bulkhead, Twistfit Marine Bulkhead,