PETKIT FF-W-0005-002 FF-T1 Wireless Pump Instructions
PETKIT FF-W-0005-002 FF-T1 Wireless Pump Instructions
Product Overview
The main structure
This specification describes a miniature wireless pump, which is mainly composed of brushless DC electric motor and centrifugal pump (as shown in Figure 1). It has the characteristics of small size, full sealing of electrical components, wireless power supply, built-in water level sensor to realize water shortage protection, safe, reliable and super quiet. Mainly suitable for pet drinking machine.
The working principle of
Through the wireless transmitter to pump motor drive board power supply, when the water level submerged sensor 1/2 ~ 2/3, the pump began to work, water from the outlet pump; When the water level is lower than the sensor, the drive plate stops output and the pump stops working.
Outline drawing
Product marking
Main parameters
| Item | Standard | Test equipment | test frequency | |
| 5.0V | Load current | 120~150(mA) | Ac and DC electrical parameter tester,wireless transmitter | All inspection of production line |
| Water shortage stop current | 90~120(mA) | Ac and DC electrical parameter tester,wireless transmitter | All inspection of production line | |
| Load power | ≤0.8(W) | Ac and DC electrical parameter tester,wireless transmitter | All inspection of production line | |
| Lift | 17~20(cm) | Pump performance test stand, wirelesstransmitter stand | Sampling inspection | |
| Maximum flow | 1.20~1.40(L/min) | Pump performance test stand, wirelesstransmitter stand | Sampling inspection | |
| Transmissiondistance(mm) | 6mm | Test Fixture | Samplinginspection | |
| low-voltage start-up | ≤4.4(V) | Pump performance test bench, wireless transmitter base DC power supply, wireless transmitterbase, water tank | All inspection of production line | |
| Maximum Excitation Voltage | ≤6V | Pump performance test bench, wireless transmitter base DC power supply, wireless transmitterbase, water tank | Sampling inspection | |
| Water level monitoring | Water level monitoring power status, water level is lower than the sensor, the pump stops working; When the water level submerges the sensor 1/2 ~ 2/3, the pumpstarts to work. | Pump performance test bench, wireless transmitter base DC power supply, wireless transmitter base, water tank | All inspection of production line | |
| Noise | ≤30(dB) | Sound level meter | Samplinginspection | |
| Life Time | ≥20000(Hour) | Endurance tests | Sampling, typetest | |
Installation Method
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- this device must accept any interference received, that may cause undesired operation.
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Documents / Resources
![]() |
PETKIT FF-W-0005-002 FF-T1 Wireless Pump [pdf] Instructions FF-W-0005, FFW0005, 2A73O-FF-W-0005, 2A73OFFW0005, FF-W-0005-002 FF-T1 Wireless Pump, FF-W-0005-002, FF-T1 Wireless Pump, Wireless Pump, Pump |
